| Sr.No. | Publication Details | Additional Information | Metrics |
|---|---|---|---|
| 1 |
Title: Modelling sifting and fluidisation segregation characteristics of powders
Authors: Poddar R.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2025.121368
Published: November 2025
|
Type: Article
Keywords: Coarse to fine ratio | Dimensionless cohesion number | Flow function | Fluidisation segregation | Sifting segregation
Volume: 465
Pages:
ISSN/eISSN: 00325910/1873328X
|
Citations: 0
Article #: 121368
Source ID: 13717
Funding:
|
| 2 |
Title: Enhanced biomechanical performance of 3D-printed Ti6Al4V bone screws: A breakthrough in orthopaedic fixation
Authors: Agarwal R.
Journal: Materials Chemistry and Physics
DOI: 10.1016/j.matchemphys.2025.131187
Published: 1 November 2025
|
Type: Article
Keywords: Additive manufacturing | Biomechanical pullout strength | Bone mineral density | Osteoporosis | Selective laser melting
Volume: 345
Pages:
ISSN/eISSN: 02540584/
|
Citations: 0
Article #: 131187
Source ID: 17800
Funding: Thapar Institute of Engineering and Technology
|
| 3 |
Title: Fruit waste-derived hybrid biofillers as a potential reinforcement in 3D printed biocomposites for building construction applications
Authors: Soni A.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2025.08.002
Published: 30 October 2025
|
Type: Article
Keywords: Biocomposites | Hybrid biofiller | Mechanical properties | Recycling | Structural applications
Volume: 152
Pages: 205-221
ISSN/eISSN: 15266125/
|
Citations: 0
Article #:
Source ID: 27677
Funding:
|
| 4 |
Title: Enhancing deposition rate and mechanical properties through hybrid arc welding with activated flux: A novel approach
Authors: Tathgir S.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2025.07.053
Published: 15 October 2025
|
Type: Article
Keywords: Activated flux | AISI 304 | Dilution | Ferrite morphology | Hybrid arc welding (HAW) | Shipbuilding
Volume: 151
Pages: 788-811
ISSN/eISSN: 15266125/
|
Citations: 0
Article #:
Source ID: 27677
Funding:
|
| 5 |
Title: Tribological performance and microstructural insights of epoxy-based GFRP nanocomposites reinforced with ceramic nanoclays for wear-resistant applications
Authors: Kumar N.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2025.07.045
Published: 15 October 2025
|
Type: Article
Keywords: Epoxy | Halloysite nanotubes | Nanoclay platelets | Polymer nanocomposites
Volume: 151
Pages: 460-475
ISSN/eISSN: 15266125/
|
Citations: 0
Article #:
Source ID: 27677
Funding:
|
| 6 |
Title: Pressure signal analysis for early blockage detection in dense phase pneumatic conveying
Authors: Mittal A.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2025.121243
Published: October 2025
|
Type: Article
Keywords: Fluidized dense phase conveying | Hilbert Huang transformation | Pipeline blockage | Power spectral density | Pressure fluctuations
Volume: 464
Pages:
ISSN/eISSN: 00325910/1873328X
|
Citations: 0
Article #: 121243
Source ID: 13717
Funding:
|
| 7 |
Title: Impact of Graphene Aspect Ratio on Electrical, Icephobic, and Durability Properties of Multifunctional Polymer Composite Coatings
Authors: Kumar R.
Journal: Journal of Applied Polymer Science
DOI: 10.1002/app.57389
Published: 15 September 2025
|
Type: Article
Keywords: coatings | composites | conducting polymers | graphene and fullerenes | nanotubes | surfaces and interfaces
Volume: 142
Pages:
ISSN/eISSN: 00218995/10974628
|
Citations: 1
Article #: e57389
Source ID: 13554
Funding: Science and Engineering Research Board
|
| 8 |
Title: Pore structure analysis and durability performance of sustainable 3D printed concrete incorporating fly ash and limestone calcined clay based binders
Authors: Kaur Z.
Journal: Construction and Building Materials
DOI: 10.1016/j.conbuildmat.2025.142577
Published: 5 September 2025
|
Type: Article
Keywords: 3D printed concrete | Additive manufacturing | Durability | Fly ash | Limestone calcined clay | Microstructure | Porosity | Shrinkage
Volume: 490
Pages:
ISSN/eISSN: 09500618/
|
Citations: 0
Article #: 142577
Source ID: 24443
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 9 |
Title: Parametric Study of the Selective Laser Melting Process on the Mechanical Properties of 3D Printed Ti6Al4V
Authors: Singh S.
Journal: Transactions of the Indian Institute of Metals
DOI: 10.1007/s12666-025-03701-z
Published: September 2025
|
Type: Article
Keywords: 3D printing | Analysis of variance | Central composite rotatable design | Elastic modulus | Nanohardness | Selective laser melting | Ti64
Volume: 78
Pages:
ISSN/eISSN: 09722815/09751645
|
Citations: 0
Article #: 222
Source ID: 12149
Funding:
|
| 10 |
Title: Profit efficiency estimation and prediction of banks with mixed structure: a unified DDF-based network DEA and ML approach
Authors: Gupta N.
Journal: Operational Research
DOI: 10.1007/s12351-025-00941-1
Published: September 2025
|
Type: Article
Keywords: Artificial neural network (ANN) | Directional distance function (DDF) | Indian banking sector | Network data envelopment analysis (DEA) | Profit efficiency | Support vector machine for regression (SVR)
Volume: 25
Pages:
ISSN/eISSN: 11092858/18661505
|
Citations: 0
Article #: 63
Source ID: 14500154733
Funding:
|
| 11 |
Title: A data-driven ensemble machine learning approach for predicting the mechanical strength of 3D printed orthopaedic bone screws
Authors: Agarwal R.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089231211235
Published: August 2025
|
Type: Article
Keywords: 3D printing | ensemble machine learning | mechanical strength | orthopaedic screw | predictive performance
Volume: 239
Pages: 1650-1662
ISSN/eISSN: 09544089/20413009
|
Citations: 2
Article #:
Source ID: 20408
Funding: Thapar Institute of Engineering and Technology
|
| 12 |
Title: Surface characterization of copper metal matrix composites reinforced with tungsten and molybdenum (Cu-W-Mo) through Microwave hybrid heating: A sustainable approach
Authors: Bashir K.
Journal: International Journal of Refractory Metals and Hard Materials
DOI: 10.1016/j.ijrmhm.2025.107147
Published: August 2025
|
Type: Article
Keywords: Cu-W-Mo powders | Electrical properties | Mechanical characterization | Microstructural characterization | Microwave casting | Microwave hybrid heating
Volume: 130
Pages:
ISSN/eISSN: 02634368/22133917
|
Citations: 1
Article #: 107147
Source ID: 12219
Funding:
|
| 13 |
Title: Evaluating the effect of 2D printing and solvent casting on the crystallographic and morphological properties of PVDF/barium titanate nanocomposites for ultra-thin piezoelectric films
Authors: Kumar S.
Journal: Ceramics International
DOI: 10.1016/j.ceramint.2025.04.108
Published: August 2025
|
Type: Article
Keywords: 2D printing | Barium titanate | FTIR | Polymer | PVDF | Reinforcement | Rheological analysis | Solvent casting | Thin film fabrication | XRD
Volume: 51
Pages: 29007-29019
ISSN/eISSN: 02728842/
|
Citations: 0
Article #:
Source ID: 21522
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 14 |
Title: Experimental and numerical studies on the contributions of the different geometric and process parameters on 3D printed PLA pin joints
Authors: Gupta A.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-025-05690-y
Published: August 2025
|
Type: Article
Keywords: 3D printing | Additive manufacturing | Failure load analysis | Finite element analysis | Pin joint | Polylactic acid | Taguchi method
Volume: 47
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 0
Article #: 379
Source ID: 71359
Funding:
|
| 15 |
Title: Green manufacturing of rGO-reinforced Cu-based MMCs with optimized properties through microwave hybrid heating process
Authors: Bashir K.
Journal: Diamond and Related Materials
DOI: 10.1016/j.diamond.2025.112516
Published: August 2025
|
Type: Article
Keywords: Cu-rGO powder | Electrical properties | Microstructural and mechanical characterization | Microwave hybrid heating | Thermal properties
Volume: 157
Pages:
ISSN/eISSN: 09259635/
|
Citations: 0
Article #: 112516
Source ID: 24680
Funding:
|
| 16 |
Title: Parametric Study of Rectangular Bluff Body Size on Performance of Galloping-Based Piezoelectric Energy Harvesters
Authors: Agarwal A.
Journal: Journal of Vibration Engineering and Technologies
DOI: 10.1007/s42417-025-01989-1
Published: August 2025
|
Type: Article
Keywords: Flow induced vibration | Galloping | Piezoelectric energy harvesting | Wind tunnel
Volume: 13
Pages:
ISSN/eISSN: 25233920/25233939
|
Citations: 0
Article #: 429
Source ID: 21100364384
Funding: Science and Engineering Research Board
|
| 17 |
Title: Synergistic effects of glass cullet and pozzolanic waste on mechanical and durability properties of paver blocks
Authors: Kishor C.
Journal: Sustainable Chemistry and Pharmacy
DOI: 10.1016/j.scp.2025.102089
Published: August 2025
|
Type: Article
Keywords: Alkali-silica reaction | Glass cullet | Microstructure | Paver block | Water absorption
Volume: 46
Pages:
ISSN/eISSN: /23525541
|
Citations: 0
Article #: 102089
Source ID: 21100444313
Funding:
|
| 18 |
Title: Microstructural, Mechanical and Residual Stress Behaviour of Dissimilar Induction-Assisted Friction Stir Welded Inconel 718-AISI SS321 Joints
Authors: Bhattacharjee R.
Journal: Metals and Materials International
DOI: 10.1007/s12540-024-01863-x
Published: July 2025
|
Type: Article
Keywords: AISI SS321 | EBSD | Inconel 718 | method | Residual Stress
Volume: 31
Pages: 2082-2103
ISSN/eISSN: 15989623/20054149
|
Citations: 1
Article #:
Source ID: 27376
Funding:
|
| 19 |
Title: Parametric Analysis of the Selective Laser Melting Process on the Mechanical and Corrosion Properties of the CoCr Alloy
Authors: Saini J.S.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-024-10147-9
Published: July 2025
|
Type: Article
Keywords: ANOVA | CoCr alloys | mechanical properties | process parameters | regression | selective laser melting | surface roughness
Volume: 34
Pages: 14507-14519
ISSN/eISSN: 10599495/15441024
|
Citations: 0
Article #:
Source ID: 21160
Funding:
|
| 20 |
Title: Influence of operating parameters on the silt erosion performance of bare and coated SS304 steel
Authors: Kumar R.
Journal: Industrial Lubrication and Tribology
DOI: 10.1108/ILT-01-2024-0028
Published: 1 July 2025
|
Type: Article
Keywords: Alumina and chromia coating | HVOF | Silt erosion | Taguchi technique
Volume: 77
Pages: 810-819
ISSN/eISSN: 00368792/17585775
|
Citations: 0
Article #:
Source ID: 20389
Funding:
|
| 21 |
Title: Investigation of Room and High-Temperature Wear Characteristics of Stir-Casted LM13/Ilmenite/Boron Carbide Hybrid Aluminum Matrix Composites
Authors: Gupta R.
Journal: Advanced Engineering Materials
DOI: 10.1002/adem.202500161
Published: July 2025
|
Type: Article
Keywords: aluminum matrix composites | high temperatures | hybrid reinforcements | solid lubricant | wear properties
Volume: 27
Pages:
ISSN/eISSN: 14381656/15272648
|
Citations: 0
Article #: 2500161
Source ID: 13886
Funding:
|
| 22 |
Title: Fault tolerant self-reconfigurable waypoint guidance for mobile robots under actuator faults
Authors: Himanshu
Journal: Journal of the Franklin Institute
DOI: 10.1016/j.jfranklin.2025.107735
Published: 15 June 2025
|
Type: Article
Keywords: Fault detection and isolation | Four-wheel mobile robot | Reconfiguration | Waypoint tracking
Volume: 362
Pages:
ISSN/eISSN: 00160032/
|
Citations: 0
Article #: 107735
Source ID: 27959
Funding: All India Council for Technical Education
|
| 23 |
Title: Enhancement in the impact and torsional properties of 3D-printed biocompatible poly(lactic acid) locking bone plates: sustainable integration into healthcare applications
Authors: Sharma S.
Journal: Polymer International
DOI: 10.1002/pi.6688
Published: June 2025
|
Type: Article
Keywords: 3D printing | biocompatible | biodegradable | biomedical | poly(lactic acid) | statistical analysis
Volume: 74
Pages: 494-508
ISSN/eISSN: 09598103/10970126
|
Citations: 1
Article #:
Source ID: 14456
Funding:
|
| 24 |
Title: An axiomatic framework for electro-mechanical behaviour of smart FG sandwich plates
Authors: Sharma M.D.
Journal: Physica Scripta
DOI: 10.1088/1402-4896/add192
Published: 1 June 2025
|
Type: Article
Keywords: electro-mechanical response | functionally graded plates | Navier solution | sandwich plates | smart structures
Volume: 100
Pages:
ISSN/eISSN: 00318949/14024896
|
Citations: 1
Article #: 065212
Source ID: 29122
Funding:
|
| 25 |
Title: Comparison of reinforcing a natural mineral versus a synthetic ceramic on the thermal expansion behavior of LM13 alloy based composites
Authors: Gupta R.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062251317053
Published: June 2025
|
Type: Article
Keywords: Aluminum matrix composites | boron carbide | coefficient of thermal expansion | ilmenite | mathematical modeling | thermal strain
Volume: 239
Pages: 4621-4634
ISSN/eISSN: 09544062/20412983
|
Citations: 1
Article #:
Source ID: 20407
Funding:
|
| 26 |
Title: Mechanical and Metallurgical Properties of Foam Developed by Friction Stir Tube Deposition Technique
Authors: Kumar M.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-024-09961-y
Published: June 2025
|
Type: Article
Keywords: aluminum precursor | foam | frictions stir tube deposition | pore size | porosity
Volume: 34
Pages: 10931-10945
ISSN/eISSN: 10599495/15441024
|
Citations: 0
Article #:
Source ID: 21160
Funding:
|
| 27 |
Title: Fault Detection, Isolation and Reconfiguration of Four-Bar Mechanism-Based Knee Exoskeleton
Authors: Jain P.
Journal: Sensors
DOI: 10.3390/s25113516
Published: June 2025
|
Type: Article
Keywords: control systems | fault detection | fault isolation | fault reconfiguration | knee exoskeleton | real-time monitoring | rehabilitation | wearable robotics
Volume: 25
Pages:
ISSN/eISSN: /14248220
|
Citations: 0
Article #: 3516
Source ID: 130124
Funding:
|
| 28 |
Title: Computationally Efficient Dynamic Timoshenko Beam Modeshapes for Vibration Analysis of Stiffened Plate Via Semi-analytical Approach
Authors: Verma Y.
Journal: Journal of Vibration Engineering and Technologies
DOI: 10.1007/s42417-025-01876-9
Published: June 2025
|
Type: Article
Keywords: Dynamic Timoshenko beam | Eigenvectors | Elliptical nodal pattern | Rectangular Plate | Stiffener
Volume: 13
Pages:
ISSN/eISSN: 25233920/25233939
|
Citations: 0
Article #: 339
Source ID: 21100364384
Funding:
|
| 29 |
Title: Effect of Fiber Orientation and Clearance on Load Sharing in Multi-Bolt Composite Connections: A Micro-Mechanical Perspective
Authors: Jadhav S.M.
Journal: International Journal of Steel Structures
DOI: 10.1007/s13296-025-00956-6
Published: June 2025
|
Type: Article
Keywords: Bolt-hole clearance | Composite materials | Fibre orientation angle | Micromechanics | Single lap bolted joint | Spring model | Volume fiber fraction
Volume: 25
Pages: 633-646
ISSN/eISSN: 15982351/20936311
|
Citations: 0
Article #:
Source ID: 19900195021
Funding:
|
| 30 |
Title: A novel real-time quality control system for 3D printing: A deep learning approach using data efficient image transformers
Authors: Singh M.
Journal: Expert Systems with Applications
DOI: 10.1016/j.eswa.2025.126863
Published: 10 May 2025
|
Type: Article
Keywords: Deep learning | DeiT | Fused deposition modeling | IoT | Quality control system | Smart manufacturing | Vision transformers
Volume: 273
Pages:
ISSN/eISSN: 09574174/
|
Citations: 3
Article #: 126863
Source ID: 24201
Funding:
|
| 31 |
Title: A Machine Learning Approach for the Assessment of Road Traffic Noise: Comparison of Regressors
Authors: Rossi D.
Journal: Aip Conference Proceedings
DOI: 10.1063/5.0273716
Published: 2 May 2025
|
Type: Conference Paper
Keywords:
Volume: 3308
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 0
Article #: 030002
Source ID: 26916
Funding: Ministry of Science and Technology of the People's Republic of China
|
| 32 |
Title: DEPOSITION OF Al2O3/Cr2O3 CERAMICS HVOF SPRAYED COATINGS FOR PROTECTION AGAINST SILT EROSION
Authors: Kumar R.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X2240008X
Published: 1 May 2025
|
Type: Article
Keywords: coatings | HVOF | hydro turbine | Silt erosion | thermal spray coatings | wear
Volume: 32
Pages:
ISSN/eISSN: 0218625X/17936667
|
Citations: 5
Article #: 2240008
Source ID: 18374
Funding:
|
| 33 |
Title: ON MICROSTRUCTURE AND CAVITATION EROSION BEHAVIOR OF MICROWAVE-SYNTHESIZED Ni-Al2O3-BASED COMPOSITE CLADDINGS
Authors: Bansal S.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X22400066
Published: 1 May 2025
|
Type: Article
Keywords: characterization | Cladding | fractographic analysis | surface modification
Volume: 32
Pages:
ISSN/eISSN: 0218625X/17936667
|
Citations: 4
Article #: 2240006
Source ID: 18374
Funding: Science and Engineering Research Board
|
| 34 |
Title: A Novel Approach to Ultrasonic Assisted Coating: Improving Biomechanical Strength of Implants Fabricated through Desktop Manufacturing
Authors: Sharma S.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-024-10205-2
Published: May 2025
|
Type: Article
Keywords: Biopolymer | Bone plate | Extrusion-based additive manufacturing (EAM) | Poly lactic acid (PLA) | Polydopamine (PDAM) | Ultrasonic assisted coating
Volume: 34
Pages: 8490-8503
ISSN/eISSN: 10599495/15441024
|
Citations: 0
Article #:
Source ID: 21160
Funding:
|
| 35 |
Title: Parametric evaluations of geometrical discrepancies in single point incremental bending
Authors: Singh A.
Journal: International Journal on Interactive Design and Manufacturing
DOI: 10.1007/s12008-024-01951-7
Published: May 2025
|
Type: Article
Keywords: Bending | Elastic springback | Error compensation | Geometrical errors
Volume: 19
Pages: 3387-3400
ISSN/eISSN: 19552513/19552505
|
Citations: 0
Article #:
Source ID: 12000154536
Funding: Thapar Institute of Engineering and Technology
|
| 36 |
Title: Utilizing phase change materials for proton exchange membrane fuel cell cooling: A review
Authors: Swathi S.
Journal: Environmental Progress and Sustainable Energy
DOI: 10.1002/ep.14596
Published: May/June 2025
|
Type: Review
Keywords: cooling techniques | fuel cell cooling | phase change materials | proton exchange membrane fuel cell | thermal management
Volume: 44
Pages:
ISSN/eISSN: 19447442/19447450
|
Citations: 0
Article #: e14596
Source ID: 17700156701
Funding:
|
| 37 |
Title: Recent Trends in Icephobic Polymer Coatings for Aerospace Applications in Cold Climates
Authors: Kumar R.
Journal: Polymers for Advanced Technologies
DOI: 10.1002/pat.70211
Published: May 2025
|
Type: Review
Keywords: durability | icephobic coating | nanocomposite | polymer coating | superhydrophobic coating
Volume: 36
Pages:
ISSN/eISSN: 10427147/10991581
|
Citations: 0
Article #: e70211
Source ID: 14470
Funding: Science and Engineering Research Board
|
| 38 |
Title: Dry sliding behavior of transparent yttrium aluminum garnet against 100Cr6 steel balls
Authors: Mittal D.
Journal: International Journal of Applied Ceramic Technology
DOI: 10.1111/ijac.14926
Published: May/June 2025
|
Type: Article
Keywords: 100Cr6 steel balls | sliding wear | transparent | vacuum sintering | wear mechanisms | yttrium aluminum garnet (YAG)
Volume: 22
Pages:
ISSN/eISSN: 1546542X/17447402
|
Citations: 0
Article #: e14926
Source ID: 13088
Funding:
|
| 39 |
Title: Role of NaCl on structural, optical and mechanical properties of recycled photovoltaic glasses
Authors: Kumar S.
Journal: Ceramics International
DOI: 10.1016/j.ceramint.2025.01.344
Published: May 2025
|
Type: Article
Keywords: Hardness | Recycling | Solar photovoltaic module | Transparency | Waste glass
Volume: 51
Pages: 15005-15014
ISSN/eISSN: 02728842/
|
Citations: 0
Article #:
Source ID: 21522
Funding: Thapar Institute of Engineering and Technology
|
| 40 |
Title: Effect of process parameters on wire-arc direct energy deposited Inconel 718 superalloy
Authors: Kumar P.
Journal: Rapid Prototyping Journal
DOI: 10.1108/RPJ-05-2023-0176
Published: 22 April 2025
|
Type: Article
Keywords: Microstructure | Process parameters | Super alloy | Taguchi | Tensile properties | Wire arc additive manufacturing
Volume: 31
Pages: 950-967
ISSN/eISSN: 13552546/
|
Citations: 4
Article #:
Source ID: 21691
Funding:
|
| 41 |
Title: Navigating the frontier: Additive Manufacturing’s role in synthesizing piezoelectric materials for flexible electronics
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/08927057241270729
Published: April 2025
|
Type: Review
Keywords: 3D printing techniques | Additive manufacturing | lab scale development | material synthesis and exploration | sensor development
Volume: 38
Pages: 1598-1636
ISSN/eISSN: 08927057/15307980
|
Citations: 5
Article #:
Source ID: 13690
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 42 |
Title: SURFACE MODIFICATION OF SS-316 TO ENHANCE CAVITATION RESISTANCE THROUGH COMPOSITE MICROWAVE CLADS
Authors: Bansal S.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X21410043
Published: 1 April 2025
|
Type: Article
Keywords: cavitation erosion | characterization | Microwave composite cladding | parametric study
Volume: 32
Pages:
ISSN/eISSN: 0218625X/17936667
|
Citations: 3
Article #: 2141004
Source ID: 18374
Funding: Science and Engineering Research Board
|
| 43 |
Title: Study on mechanical properties of deposited metallic objects for different build strategies using semi-automatic welding setup
Authors: Kumar V.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062241301868
Published: April 2025
|
Type: Article
Keywords: Automatic-GMAW | bending | build-strategies | heat-input | metal-deposition | micro-hardness | SEM | tensile
Volume: 239
Pages: 2442-2452
ISSN/eISSN: 09544062/20412983
|
Citations: 0
Article #:
Source ID: 20407
Funding:
|
| 44 |
Title: Effect of Arterial Blood Flow on Magnetic Nanoparticle Thermotherapy Applied on a Realistic Breast Tumor Model
Authors: Nain S.
Journal: International Journal for Numerical Methods in Biomedical Engineering
DOI: 10.1002/cnm.70039
Published: April 2025
|
Type: Article
Keywords: artery effects on magnetic hyperthermia | breast tumor | magnetic nanoparticle hyperthermia | mammary artery | MNP dose
Volume: 41
Pages:
ISSN/eISSN: 20407939/20407947
|
Citations: 0
Article #: e70039
Source ID: 19700174683
Funding: Virginia Polytechnic Institute and State University
|
| 45 |
Title: Rotary ultrasonic drilling of polyetherimide composite to enhance the surface roughness and MRR: Experimental investigations and statistical approach
Authors: Shard A.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/08927057241275637
Published: April 2025
|
Type: Article
Keywords: conventional machining | material removal rate | polyetherimide composites | Rotary ultrasonic drilling | surface roughness
Volume: 38
Pages: 1491-1514
ISSN/eISSN: 08927057/15307980
|
Citations: 0
Article #:
Source ID: 13690
Funding:
|
| 46 |
Title: Trajectory tracking control of shape memory alloy actuated flexible tube manipulator for tumor irradiation applications
Authors: Bhatt N.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-025-05492-2
Published: April 2025
|
Type: Article
Keywords: Flexible manipulator | Robust controller | Shape memory alloy springs | Trajectory tracking | Tumors
Volume: 47
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 0
Article #: 195
Source ID: 71359
Funding:
|
| 47 |
Title: Microwave-assisted in-situ fabrication of copper reinforced with molybdenum and tungsten particles
Authors: Bashir K.
Journal: Materials Characterization
DOI: 10.1016/j.matchar.2025.114756
Published: March 2025
|
Type: Article
Keywords: Cu-W-Mo powder | Microstructure and mechanical characterization | Microwave casting | Microwave hybrid heating (MHH)
Volume: 221
Pages:
ISSN/eISSN: 10445803/
|
Citations: 3
Article #: 114756
Source ID: 27289
Funding:
|
| 48 |
Title: Influence of SiO2/C nanoparticles on specific strength and stiffness in agro-waste reinforced polymer composites: experimental and numerical investigations
Authors: Singh J.
Journal: Physica Scripta
DOI: 10.1088/1402-4896/adb0fb
Published: 1 March 2025
|
Type: Article
Keywords: agro-waste reinforced polymer composites | FEM | SiO2/C nanoparticles | sol-gel technique | tensile strength
Volume: 100
Pages:
ISSN/eISSN: 00318949/14024896
|
Citations: 0
Article #: 035935
Source ID: 29122
Funding:
|
| 49 |
Title: Experimental Investigations on Surface Integrity in Thin Structure Machining of Aluminum 6061-T6
Authors: Singh A.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-024-09222-y
Published: February 2025
|
Type: Article
Keywords: corrosion | nano-indentation | relieved shank tooling | residual stresses | surface roughness | thin structure machining
Volume: 34
Pages: 1959-1973
ISSN/eISSN: 10599495/15441024
|
Citations: 3
Article #:
Source ID: 21160
Funding: Thapar Institute of Engineering and Technology
|
| 50 |
Title: Mechanical and wear characteristics of spark plasma sintered titanium/multilayer graphene nanocomposites
Authors: Sharma D.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089231173523
Published: February 2025
|
Type: Article
Keywords: mechanical properties | multilayer graphene | spark plasma sintering | Titanium alloy | wear
Volume: 239
Pages: 330-339
ISSN/eISSN: 09544089/20413009
|
Citations: 1
Article #:
Source ID: 20408
Funding: Thapar Institute of Engineering and Technology
|
| 51 |
Title: Understanding photo-thermal and melting mechanisms in optical charging of nano and micro particles laden organic PCMs
Authors: Suhas D.S.
Journal: International Journal of Thermal Sciences
DOI: 10.1016/j.ijthermalsci.2024.109493
Published: February 2025
|
Type: Article
Keywords:
Volume: 208
Pages:
ISSN/eISSN: 12900729/
|
Citations: 0
Article #: 109493
Source ID: 13761
Funding: Indian Institute of Technology Kanpur
|
| 52 |
Title: A comprehensive study on tunable structural, optical and mechanical properties of recycled windscreen glasses
Authors: Kumar S.
Journal: Journal of Non Crystalline Solids
DOI: 10.1016/j.jnoncrysol.2024.123304
Published: 15 January 2025
|
Type: Article
Keywords: Automotive waste | Optical and mechanical property | Recycling | Silicate units | Windscreen
Volume: 648
Pages:
ISSN/eISSN: 00223093/18734812
|
Citations: 3
Article #: 123304
Source ID: 28547
Funding: Thapar Institute of Engineering and Technology
|
| 53 |
Title: Dynamic recrystallization during solid state friction stir welding/processing/additive manufacturing: Mechanisms, microstructure evolution, characterization, modeling techniques and challenges
Authors: Singh A.
Journal: Critical Reviews in Solid State and Materials Sciences
DOI: 10.1080/10408436.2024.2391333
Published: 2025
|
Type: Review
Keywords: Dynamic recrystallization | friction stir additive manufacturing | friction stir processing | friction stir welding | machine learning | numerical modeling | phase transformation
Volume: 50
Pages: 77-135
ISSN/eISSN: 10408436/15476561
|
Citations: 22
Article #:
Source ID: 27476
Funding: Thapar Institute of Engineering and Technology
|
| 54 |
Title: A sustainable and energy efficient approach for development of electrically conductive materials and their characterizations
Authors: Bashir K.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/14644207241244600
Published: January 2025
|
Type: Article
Keywords: characterization | composite casting | Cu-Mo | Microwave hybrid heating
Volume: 239
Pages: 31-43
ISSN/eISSN: 14644207/20413076
|
Citations: 5
Article #:
Source ID: 20971
Funding:
|
| 55 |
Title: Various Vibration Harvesting Techniques for Rotating System: An Overview
Authors: Mahto P.R.
Journal: Journal of Vibration Engineering and Technologies
DOI: 10.1007/s42417-024-01712-6
Published: January 2025
|
Type: Review
Keywords: Air spring | Anti-vibration pads | Suspension system | Variable inertia flywheel | Vibration reduction
Volume: 13
Pages:
ISSN/eISSN: 25233920/25233939
|
Citations: 4
Article #: 27
Source ID: 21100364384
Funding:
|
| 56 |
Title: On the performance improvement of a flutter based energy harvester by introducing additional wake field
Authors: Agarwal A.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2021.1968077
Published: 2025
|
Type: Article
Keywords: bluff body | energy harvester | flexible sheet | Flutter | piezoelectric effect | wind tunnel experiment
Volume: 47
Pages: 10707-10720
ISSN/eISSN: 15567036/15567230
|
Citations: 4
Article #:
Source ID: 4500151514
Funding: Science and Engineering Research Board
|
| 57 |
Title: Investigation of Frictional Deformation on Mechanical and Metallurgical Properties of Ni-based Functionally Graded Materials Developed by Wire and Arc Additive Manufacturing
Authors: Singh M.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-024-09136-9
Published: January 2025
|
Type: Article
Keywords: friction stir processing | functionally graded material | mechanical properties | microstructure | wire arc additive manufacturing
Volume: 34
Pages: 1112-1122
ISSN/eISSN: 10599495/15441024
|
Citations: 3
Article #:
Source ID: 21160
Funding:
|
| 58 |
Title: Enhanced Euler–Lagrange Formulation for Analyzing Human Gait With Moving Base Reference
Authors: Chander S.A.
Journal: Journal of Mechanisms and Robotics
DOI: 10.1115/1.4065520
Published: 1 January 2025
|
Type: Article
Keywords: and control of mechanical systems | computational kinematics | dynamics | Euler–Lagrange formulation | human gait | inverse dynamic model | kinematics | Marker data | moving frame reference | multi-body dynamics and exoskeletons | rehabilitation mechanisms and robots | theoretical
Volume: 17
Pages:
ISSN/eISSN: 19424302/19424310
|
Citations: 3
Article #: 011006
Source ID: 19700186816
Funding:
|
| 59 |
Title: A comprehensive study on porosity modelling and its impact on fracture behavior of edge cracked FG structures using XIGA
Authors: Kumar S.
Journal: Composite Structures
DOI: 10.1016/j.compstruct.2024.118602
Published: 1 January 2025
|
Type: Article
Keywords: Edge Crack | Fracture | Functionally Graded Structure | Porosity | Power law | SIF
Volume: 351
Pages:
ISSN/eISSN: 02638223/
|
Citations: 2
Article #: 118602
Source ID: 15063
Funding:
|
| 60 |
Title: Investigating the Influence of Additive Manufacturing and Ultrasonic Coating Parameters on Biopolymeric Scaffold Performance Using Response Surface Methodology
Authors: Sharma S.
Journal: Biopolymers
DOI: 10.1002/bip.23629
Published: January 2025
|
Type: Article
Keywords: additive manufacturing | compressive strength | poly lactic acid | polydopamine | response surface methodology | TPMS scaffolds
Volume: 116
Pages:
ISSN/eISSN: 00063525/10970282
|
Citations: 1
Article #: e23629
Source ID: 25799
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 61 |
Title: Maximizing Joint Integrity of Aerospace-Grade AA7075 through Optimized Friction Stir Welding Parameters
Authors: Singh A.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-025-11052-5
Published: 2025
|
Type: Article
Keywords: AA7075 | aerospace | friction stir welding | metallurgical evolution | Taguchi L9
Volume:
Pages:
ISSN/eISSN: 10599495/15441024
|
Citations: 1
Article #:
Source ID: 21160
Funding: Thapar Institute of Engineering and Technology
|
| 62 |
Title: Enhanced microstructural properties of copper composites through Fe-W reinforcement via microwave heating
Authors: Bashir K.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/09544054251317222
Published: 2025
|
Type: Article
Keywords: Cu-Fe-W casting | mechanical characterization | Microwave hybrid heating
Volume:
Pages:
ISSN/eISSN: 09544054/20412975
|
Citations: 1
Article #:
Source ID: 20406
Funding:
|
| 63 |
Title: Investigation on influence of selective laser melting parameters on mechanical properties of Ti-6Al-4V alloy
Authors: Kumar M.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062241284993
Published: January 2025
|
Type: Article
Keywords: Additive manufacturing | laser power | printing parameters | scan speed | SLM | Ti-6Al-4V
Volume: 239
Pages: 117-128
ISSN/eISSN: 09544062/20412983
|
Citations: 1
Article #:
Source ID: 20407
Funding:
|
| 64 |
Title: Numerical assessment of bending and buckling analysis of sigmoid functionally graded (S-FGM) porous plates in framework of secant hyperbolic shear deformation theory: A finite element study
Authors: Dhuria M.
Journal: Mechanics Based Design of Structures and Machines
DOI: 10.1080/15397734.2025.2473025
Published: 2025
|
Type: Article
Keywords: buckling | finite element | Functionally graded | higher order theory | porosity | power-law functions | static
Volume: 53
Pages: 5737-5761
ISSN/eISSN: 15397734/15397742
|
Citations: 1
Article #:
Source ID: 21092
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 65 |
Title: Dimensional and geometric deviation modelling for polycarbonate parts fabricated by fused filament fabrication-a machine learning approach
Authors: Faroze F.
Journal: International Journal on Interactive Design and Manufacturing
DOI: 10.1007/s12008-025-02279-6
Published: 2025
|
Type: Article
Keywords: Additive manufacturing | Dimensional accuracy | Fused filament fabrication (FFF) | Geometric tolerancing | Machine learning
Volume:
Pages:
ISSN/eISSN: 19552513/19552505
|
Citations: 1
Article #:
Source ID: 12000154536
Funding:
|
| 66 |
Title: MECHANICAL AND TRIBOLOGICAL PROPERTIES OF EPOXY-BASED NATURAL FIBER-REINFORCED HYBRID BIO-COMPOSITES
Authors: Singh L.K.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X25501380
Published: 2025
|
Type: Article
Keywords: erosion | hardness | Hybrid bio-composite | swelling | tensile strength | water absorption | wear
Volume:
Pages:
ISSN/eISSN: 0218625X/17936667
|
Citations: 0
Article #: 2550138
Source ID: 18374
Funding:
|
| 67 |
Title: Influence of Process Parameters on Forming Forces in Single Point Incremental Forming of Commercially Pure Titanium
Authors: Kumar R.
Journal: Key Engineering Materials
DOI: 10.4028/p-kAncM0
Published: 2025
|
Type: Conference Paper
Keywords: CNC | Commercially pure titanium | Forming forces | Process Parameters | SPIF
Volume: 1012
Pages: 19-28
ISSN/eISSN: 10139826/16629795
|
Citations: 0
Article #:
Source ID: 12378
Funding:
|
| 68 |
Title: Analyzing and predicting the cost-effectiveness of Indian banks using hybrid network DEA and twin SVR approach
Authors: Gupta N.
Journal: Annals of Operations Research
DOI: 10.1007/s10479-025-06767-6
Published: 2025
|
Type: Article
Keywords: Cost efficiency | Directional distance function (DDF) | Indian banking sector | Network DEA | Twin support vector regression (TWSVR) | Window analysis
Volume:
Pages:
ISSN/eISSN: 02545330/15729338
|
Citations: 0
Article #:
Source ID: 23090
Funding:
|
| 69 |
Title: Analyzing and predicting the cost-effectiveness of Indian banks using hybrid network DEA and twin SVR approach
Authors: Gupta N.
Journal: Annals of Operations Research
DOI: 10.1007/s10479-025-06767-6
Published: 2025
|
Type: Article
Keywords: Cost efficiency | Directional distance function (DDF) | Indian banking sector | Network DEA | Twin support vector regression (TWSVR) | Window analysis
Volume:
Pages:
ISSN/eISSN: 02545330/15729338
|
Citations: 0
Article #:
Source ID: 23090
Funding:
|
| 70 |
Title: Effect of friction stir processing on wire arc additively manufactured ER70S-6/SS308L bimetallic FGM
Authors: Singh M.
Journal: Journal of Adhesion Science and Technology
DOI: 10.1080/01694243.2024.2449414
Published: 2025
|
Type: Article
Keywords: Bi-metallic FGM | fatigue | friction stir processing | tensile strength | wire arc additive manufacturing
Volume: 39
Pages: 1353-1374
ISSN/eISSN: 01694243/15685616
|
Citations: 0
Article #:
Source ID: 13664
Funding:
|
| 71 |
Title: Optimization of gas diffusion layer thickness for unitized regenerative fuel cell: A numerical simulation study
Authors: Yadav S.
Journal: Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy
DOI: 10.1177/09576509251337604
Published: 2025
|
Type: Article
Keywords: fluid transport resistance | gas diffusion layer | gas distribution uniformity | Renewable energy | unitized regenerative fuel cell
Volume:
Pages:
ISSN/eISSN: 09576509/20412967
|
Citations: 0
Article #:
Source ID: 20405
Funding:
|
| 72 |
Title: OPTIMISING THE DESIGN OF AUXETIC CORE AIRFOIL FOR WING MORPHING APPLICATIONS
Authors: Whan A.
Journal: Structural Integrity and Life
DOI: 10.69644/ivk-2025-siA-0017
Published: 2025
|
Type: Article
Keywords:
Volume: 25
Pages: S17-S24
ISSN/eISSN: 14513749/18207863
|
Citations: 0
Article #:
Source ID: 21100455546
Funding: Science and Engineering Research Board
|
| 73 |
Title: Design and Analysis of a New Magnetorheological Worm Gear Type Finishing Process for Improved Productivity
Authors: Khatri S.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-025-10885-4
Published: 2025
|
Type: Article
Keywords: gear profile | hardened EN-24 spur gear | magnetic field | MR finishing | MRWGPF tool | surface roughness
Volume:
Pages:
ISSN/eISSN: 10599495/15441024
|
Citations: 0
Article #: 108950
Source ID: 21160
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 74 |
Title: Free vibration and buckling characteristics of temperature dependent FGCNT reinforced plates in finite element framework of a non-polynomial axiomatic approach
Authors: Sharma L.K.
Journal: Mechanics Based Design of Structures and Machines
DOI: 10.1080/15397734.2024.2416602
Published: 2025
|
Type: Article
Keywords: buckling | finite element method | free vibration | functionally graded carbon nanotube reinforced plate | Higher order shear deformation theory | temperature dependent material properties
Volume: 53
Pages: 2920-2942
ISSN/eISSN: 15397734/15397742
|
Citations: 0
Article #:
Source ID: 21092
Funding: Science and Engineering Research Board
|
| 75 |
Title: Integrating machine learning for predicting biomechanical properties of layered manufactured bone implants
Authors: Sharma S.
Journal: Polymer Engineering and Science
DOI: 10.1002/pen.27007
Published: January 2025
|
Type: Article
Keywords: biomechanical properties | decision tree regression | layered manufacturing | locking bone plates | machine learning | XGBoost regression
Volume: 65
Pages: 258-277
ISSN/eISSN: 00323888/15482634
|
Citations: 0
Article #:
Source ID: 13695
Funding:
|
| 76 |
Title: Optimizing Quadcopter Chassis Through Generative Design: A Novel Approach
Authors: Sharma U.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-97-6176-0_8
Published: 2025
|
Type: Conference Paper
Keywords: Additive manufacturing | AI in design | Artificial intelligence (AI) | Generative design (GD) | Quadcopter | Unmanned aerial vehicle (UAV)
Volume: 5
Pages: 85-94
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding: Science and Engineering Research Board
|
| 77 |
Title: Comparative Evaluation of Analytical Techniques for Estimating Ground Reaction Force in Human Walking
Authors: Chander S.A.
Journal: Studies in Systems Decision and Control
DOI: 10.1007/978-3-031-86977-8_4
Published: 2025
|
Type: Book Chapter
Keywords: Biomechanics | Estimation model | Gait analysis | Ground reaction force
Volume: 585
Pages: 67-88
ISSN/eISSN: 21984182/21984190
|
Citations: 0
Article #:
Source ID: 21100828949
Funding: Science and Engineering Research Board
|
| 78 |
Title: Development of novel mortar using fine river sand and pretreated waste flue gas desulfurization gypsum powder and pond fly ash
Authors: Kishor C.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2024.2425687
Published: 2025
|
Type: Article
Keywords: FGDG | pond fly ash | SEM | shrinkage
Volume: 43
Pages: 144-158
ISSN/eISSN: 02726351/15480046
|
Citations: 0
Article #:
Source ID: 13661
Funding:
|
| 79 |
Title: Rice stubble reinforced polymeric composites: Improvement in hygrothermal durability through fibre pre-treatment
Authors: Somal S.S.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/14644207241310583
Published: 2025
|
Type: Article
Keywords: alkali pre-treatment | hygro-thermal ageing | moisture durability | Rice straw polymer composites | water pre-treatment | wettability
Volume:
Pages:
ISSN/eISSN: 14644207/20413076
|
Citations: 0
Article #:
Source ID: 20971
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 80 |
Title: Dynamic interplay of tool geometry and process variables in FSW of aerospace alloys AA7075
Authors: Singh A.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062251347102
Published: 2025
|
Type: Article
Keywords: AA7075 | Friction stir welding | microstructural evaluation | precipitates | XRD
Volume:
Pages:
ISSN/eISSN: 09544062/20412983
|
Citations: 0
Article #: 09544062251347102
Source ID: 20407
Funding: Thapar Institute of Engineering and Technology
|
| 81 |
Title: Recent advances in co-firing of biomass and other fuels in fluidised systems: a review
Authors: Kumar D.
Journal: Combustion Theory and Modelling
DOI: 10.1080/13647830.2025.2475169
Published: 2025
|
Type: Article
Keywords:
Volume: 29
Pages: 246-276
ISSN/eISSN: 13647830/17413559
|
Citations: 0
Article #:
Source ID: 13711
Funding:
|
| 82 |
Title: Thermomechanical analysis of induction-assisted friction stir welded Inconel 718 and SS321 by 3D-CEL approach
Authors: Bhattacharjee R.
Journal: International Journal of Modelling and Simulation
DOI: 10.1080/02286203.2025.2484306
Published: 2025
|
Type: Article
Keywords: CEL | defect prediction | Inconel 718 | induction-assisted friction stir welding process | residual stress | sin2ψ method | SS321
Volume:
Pages:
ISSN/eISSN: 02286203/19257082
|
Citations: 0
Article #:
Source ID: 21112
Funding:
|
| 83 |
Title: Dynamic stress concentrations in piezoelectric materials with semi-elliptical surface notches under shear horizontal waves
Authors: Kaushik A.
Journal: Acta Mechanica
DOI: 10.1007/s00707-025-04421-7
Published: 2025
|
Type: Article
Keywords:
Volume:
Pages:
ISSN/eISSN: 00015970/16196937
|
Citations: 0
Article #:
Source ID: 19747
Funding:
|
| 84 |
Title: Data-Driven Aircraft Engine Prognostics Using Probabilistic Machine Learning on NASA C–MAPSS Dataset: An Industry 4.0 Standpoint
Authors: Singh V.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-97-6176-0_6
Published: 2025
|
Type: Conference Paper
Keywords: Data-driven prognostics | Gaussian Process Regression (GPR) | Industry 4.0 | NASA C–MAPSS | NASA score | Probabilistic machine learning | Remaining useful life (RUL)
Volume: 5
Pages: 61-71
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding: Science and Engineering Research Board
|
| 85 |
Title: Structural responses of functionally graded sandwich microplates: couple stress model in the nonpolynomial axiomatic framework
Authors: Joshan Y.S.
Journal: Mechanics Based Design of Structures and Machines
DOI: 10.1080/15397734.2025.2538086
Published: 2025
|
Type: Article
Keywords: buckling | free vibration | functionally graded sandwich plate | Microplates | shear deformation theory | static analysis
Volume:
Pages:
ISSN/eISSN: 15397734/15397742
|
Citations: 0
Article #:
Source ID: 21092
Funding:
|
| 86 |
Title: Structural and mechanical performance of material extrusion-based 3D printed PLA/Lawsonia inermis composite
Authors: Bharat N.
Journal: Wood Material Science and Engineering
DOI: 10.1080/17480272.2025.2525329
Published: 2025
|
Type: Article
Keywords: additive manufacturing | Lawsonia inermis | PLA
Volume:
Pages:
ISSN/eISSN: 17480272/17480280
|
Citations: 0
Article #:
Source ID: 8700153309
Funding:
|
| 87 |
Title: Optimizing Re-entrant Honeycomb Auxetic Unit Cell Structure for Superior Mechanical Properties for Practical Applications
Authors: Balayan A.
Journal: Lecture Notes in Networks and Systems
DOI: 10.1007/978-981-96-1449-3_46
Published: 2025
|
Type: Conference Paper
Keywords: Auxetic unit cell | Euler-bernoulli beam theory | FEA | Optimization | Re-entrant
Volume: 1192 LNNS
Pages: 593-604
ISSN/eISSN: 23673370/23673389
|
Citations: 0
Article #:
Source ID: 21100901469
Funding: Science and Engineering Research Board
|
| 88 |
Title: Simulation and Control of Shape Memory Alloy Spring Actuator in a Flexible Tube Manipulator
Authors: Bhatt N.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-97-7525-5_3
Published: 2025
|
Type: Conference Paper
Keywords: Calibration controller | Flexible tube manipulator | Positional tracking | SMA actuator
Volume:
Pages: 33-41
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 89 |
Title: Surface Integrity of AA6061-T6 Sheets Formed by Single Point Incremental Forming Process
Authors: Singh M.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-025-11537-3
Published: 2025
|
Type: Article
Keywords: AA6061-T6 | corrosion | residual stresses | single point incremental forming | surface
Volume:
Pages:
ISSN/eISSN: 10599495/15441024
|
Citations: 0
Article #:
Source ID: 21160
Funding:
|
| 90 |
Title: Integrating RSM and ANN for surface quality modeling and prediction in Fused Filament Fabrication
Authors: Faroze F.
Journal: Progress in Additive Manufacturing
DOI: 10.1007/s40964-025-01167-5
Published: 2025
|
Type: Article
Keywords: Artificial neural networks (ANN) | Fused filament fabrication (FFF) | Response surface methodology (RSM) | Surface roughness | Waviness
Volume:
Pages:
ISSN/eISSN: 23639512/23639520
|
Citations: 0
Article #: 107238
Source ID: 21100942825
Funding:
|
| 91 |
Title: Experimental investigation and parametric optimization of neurosurgical bone grinding under bio-mimic environment
Authors: Babbar A.
Journal: Surface Engineering and Performance of Biomaterials
DOI: 10.1142/9789819812578_0001
Published: 1 January 2025
|
Type: Book Chapter
Keywords: Bone grinding | forces | infrared thermography | optimization | temperature
Volume:
Pages: 1-28
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101297406
Funding:
|
| 92 |
Title: Evaluations of in-process strains and residual stresses in Cp-Ti Gr 2 strips produced by large strain extrusion machining
Authors: Mavi G.S.
Journal: Materials Research Proceedings
DOI: 10.21741/9781644903599-180
Published: 2025
|
Type: Conference Paper
Keywords: Extrusion Machining | Plastic Deformation | Process Simulation | Residual Stresses | Titanium
Volume: 54
Pages: 1674-1684
ISSN/eISSN: 24743941/2474395X
|
Citations: 0
Article #:
Source ID: 21101041837
Funding:
|
| 93 |
Title: Synergistic Enhancement of Impact Strength in Epoxy-Based GFRP Nanocomposites Through Simultaneous Reinforcement of Nanoclays Having Diverse Morphologies
Authors: Setia G.
Journal: Polymer Composites
DOI: 10.1002/pc.70130
Published: 2025
|
Type: Article
Keywords: epoxy | glass fiber | impact strength | nanoclay morphology | tensile strength
Volume:
Pages:
ISSN/eISSN: 02728397/15480569
|
Citations: 0
Article #:
Source ID: 14433
Funding:
|
| 94 |
Title: On printability of barium titanate reinforced PVDF nano ink for smart and flexible sensors: Rheological and concentration view point
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/08927057251318720
Published: 2025
|
Type: Article
Keywords: 2D printing | barium titanate | ink optimization | piezoelectric ink | polymer | PVDF | rheology
Volume:
Pages:
ISSN/eISSN: 08927057/15307980
|
Citations: 0
Article #:
Source ID: 13690
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 95 |
Title: Traffic noise modeling
Authors: Singh D.
Journal: Handbook of Vibroacoustics Noise and Harshness
DOI: 10.1007/978-981-97-8100-3_11
Published: 17 December 2024
|
Type: Book Chapter
Keywords: Pass-by test | Prediction modelling | Traffic noise | Traffic noise descriptors | Traffic noise parameters
Volume:
Pages: 143-166
ISSN/eISSN: /
|
Citations: 1
Article #:
Source ID: 21101291274
Funding:
|
| 96 |
Title: Acoustical metamaterials for noise control applications
Authors: Shah S.S.
Journal: Handbook of Vibroacoustics Noise and Harshness
DOI: 10.1007/978-981-97-8100-3_64
Published: 17 December 2024
|
Type: Book Chapter
Keywords: Acoustic metamaterial | Noise control | Sound absorption | Sound insulation
Volume:
Pages: 835-848
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101291274
Funding:
|
| 97 |
Title: Coupled nodal integral-immersed boundary method (NI-IBM) for simulating convection-diffusion physics
Authors: Singh A.
Journal: Journal of Computational Physics
DOI: 10.1016/j.jcp.2024.113394
Published: 15 December 2024
|
Type: Article
Keywords: Convection-diffusion physics | Immersed boundary method | Nodal integral method | Transverse integration procedure
Volume: 519
Pages:
ISSN/eISSN: 00219991/10902716
|
Citations: 2
Article #: 113394
Source ID: 13191
Funding:
|
| 98 |
Title: Investigating the performance evaluation of Cu-Cr tool fabricated by powder metallurgy during electrical discharge machining of EN9 steel
Authors: Shard A.
Journal: World Journal of Engineering
DOI: 10.1108/WJE-03-2023-0073
Published: 5 December 2024
|
Type: Article
Keywords: Analysis of variance | Electric discharge machining | EN9 steel | Material removal rate | Powder metallurgy | Surface roughness
Volume: 21
Pages: 1074-1085
ISSN/eISSN: 17085284/
|
Citations: 2
Article #:
Source ID: 21100305241
Funding:
|
| 99 |
Title: Exploring the Impact of Nanoclay on Epoxy Nanocomposites: A Comprehensive Review
Authors: Shelly D.
Journal: Journal of Composites Science
DOI: 10.3390/jcs8120506
Published: December 2024
|
Type: Review
Keywords: application | epoxy | nanoclay | nanocomposite | performance
Volume: 8
Pages:
ISSN/eISSN: /2504477X
|
Citations: 11
Article #: 506
Source ID: 21101041997
Funding: National Research Foundation of Korea
|
| 100 |
Title: Corrosion and Metallurgical Behavior of Wire Arc Additively Manufactured Functionally Graded Superduplex Stainless Steel/Inconel 625
Authors: Kaur H.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-023-08988-x
Published: December 2024
|
Type: Article
Keywords: cold metal transfer | corrosion | Inconel 625 | microstructure | superduplex stainless steel | wire arc additive manufacturing
Volume: 33
Pages: 14011-14028
ISSN/eISSN: 10599495/15441024
|
Citations: 6
Article #:
Source ID: 21160
Funding: Department of Mechanical Engineering, University of Alberta
|
| 101 |
Title: Physics-Informed Neural Network for Solving a One-Dimensional Solid Mechanics Problem
Authors: Singh V.
Journal: Modelling
DOI: 10.3390/modelling5040080
Published: December 2024
|
Type: Article
Keywords: artificial neural network | computational solid mechanics | deep neural network | partial differential equation | physics-informed neural network
Volume: 5
Pages: 1532-1549
ISSN/eISSN: /26733951
|
Citations: 5
Article #:
Source ID: 21101176675
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 102 |
Title: Effect of process parameters on surface roughness of NiCu alloy in fluid jet polishing
Authors: Choudhary S.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089231166651
Published: December 2024
|
Type: Article
Keywords: 3D printed tool | Fluid jet polishing | Monel-400 | silicon carbide abrasive slurry | surface roughness
Volume: 238
Pages: 2883-2893
ISSN/eISSN: 09544089/20413009
|
Citations: 3
Article #:
Source ID: 20408
Funding:
|
| 103 |
Title: Synergistic corrosion prevention of mild steel bars in concrete using PANI and nano-clay modified epoxy coatings
Authors: Sharma N.
Journal: Journal of Building Engineering
DOI: 10.1016/j.jobe.2024.111509
Published: 1 December 2024
|
Type: Article
Keywords: And nano-reinforced composite | Concrete | Corrosion | Nano-clays | Non-destructive monitoring | Polyaniline | Silane-treatment | Ultrasonic guided waves
Volume: 98
Pages:
ISSN/eISSN: /23527102
|
Citations: 2
Article #: 111509
Source ID: 21100389518
Funding: Science and Engineering Research Board
|
| 104 |
Title: Modelling and prediction of mechanical properties of FFF-printed polycarbonate parts using ML and DA hybrid approach
Authors: Faroze F.
Journal: Colloid and Polymer Science
DOI: 10.1007/s00396-024-05315-1
Published: December 2024
|
Type: Article
Keywords: Dimensional analysis | Fused filament fabrication (FFF) | Impact resistance | Machine learning | Polycarbonate | Shear strength
Volume: 302
Pages: 1891-1909
ISSN/eISSN: 0303402X/14351536
|
Citations: 1
Article #:
Source ID: 25828
Funding:
|
| 105 |
Title: Application of machine learning in rotary ultrasonic-assisted orthopedic bone drilling: A biomechanical pull out in vitro study
Authors: Agarwal R.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062241277739
Published: December 2024
|
Type: Article
Keywords: biomechanical pullout strength | bone drilling | inclination angle | machine learning | Orthopedic | ultrasonic actuations
Volume: 238
Pages: 10911-10921
ISSN/eISSN: 09544062/20412983
|
Citations: 0
Article #:
Source ID: 20407
Funding:
|
| 106 |
Title: Improved tangent bug algorithm with log-barrier lyapunov function for obstacle avoidance in four-wheeled mobile-robots
Authors: Himanshu
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-024-05277-z
Published: December 2024
|
Type: Article
Keywords: I-TB algorithm | Log-BLF algorithm | Mobile-robot | Obstacle-avoidance | Path-following
Volume: 46
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 0
Article #: 709
Source ID: 71359
Funding:
|
| 107 |
Title: Investigating the feasibility of agro-waste briquettes as a sustainable energy source in Borno state Nigeria as pathways for post-conflict and instability recovery
Authors: Waziri S.A.
Journal: Discover Sustainability
DOI: 10.1007/s43621-024-00488-9
Published: December 2024
|
Type: Article
Keywords: Alternative energy | Briquettes | Market feasibility | Marketing plan | PESTLE | Sustainable solution | SWOT
Volume: 5
Pages:
ISSN/eISSN: /26629984
|
Citations: 0
Article #: 314
Source ID: 21101138720
Funding: University of Maiduguri
|
| 108 |
Title: Metallurgical and mechanical properties of trimetallic functionally graded material fabricated by wire arc additive manufacturing
Authors: Singh M.
Journal: Journal of Alloys and Compounds
DOI: 10.1016/j.jallcom.2024.175725
Published: 5 November 2024
|
Type: Article
Keywords: duplex steel (ER2205) | Inconel 718 | lave phase | mechanical properties | microstructure | stainless steel (ER318L) | trimetallic FGM | Wire arc additive manufacturing (WAAM)
Volume: 1004
Pages:
ISSN/eISSN: 09258388/
|
Citations: 8
Article #: 175725
Source ID: 12325
Funding:
|
| 109 |
Title: Design and implementation of an adaptive headlight system model for enhanced night-time driving safety
Authors: Singh S.
Journal: Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
DOI: 10.1177/09544070231194744
Published: November 2024
|
Type: Article
Keywords: Adaptive headlight system | Arduino | machine learning | reflector system | Troxler effect
Volume: 238
Pages: 3957-3967
ISSN/eISSN: 09544070/20412991
|
Citations: 1
Article #:
Source ID: 23969
Funding:
|
| 110 |
Title: Comparison of Different Additively Manufactured Ti6Al4V Scaffold Designs
Authors: Singh S.
Journal: Defence Science Journal
DOI: 10.14429/dsj.74.19759
Published: November 2024
|
Type: Article
Keywords: Additive manufacturing | Biomedical, Finite element | Scaffold | Ti6Al4V
Volume: 74
Pages: 929-936
ISSN/eISSN: 0011748X/0976464X
|
Citations: 0
Article #:
Source ID: 17294
Funding: Dassault Systèmes La Fondation
|
| 111 |
Title: Unlocking the Impact of “Cell Position” on Solid-State Hydrogen Storage: Investigations on an Activated Carbon Electrode Integrated in a Modified Reversible Polymer Electrolyte Membrane Fuel Cell
Authors: Singh R.
Journal: Energy Technology
DOI: 10.1002/ente.202400215
Published: November 2024
|
Type: Article
Keywords: activated carbon electrode | cell position | electrochemical hydrogen storage | parallel flow field | reversible fuel cell
Volume: 12
Pages:
ISSN/eISSN: 21944288/21944296
|
Citations: 0
Article #: 2400215
Source ID: 21100423919
Funding: Thapar Institute of Engineering and Technology
|
| 112 |
Title: Microstructural investigation of variable tungsten reinforcement in copper-based composite microwave castings
Authors: Bashir K.
Journal: International Journal of Metalcasting
DOI: 10.1007/s40962-024-01262-3
Published: October 2024
|
Type: Article
Keywords: characterization | composite | Cu–W | hybrid heating | metal matrix composites (MMCs) | microstructure | microwave casting
Volume: 18
Pages: 3435-3448
ISSN/eISSN: 19395981/21633193
|
Citations: 8
Article #:
Source ID: 21100198509
Funding: UK Research and Innovation
|
| 113 |
Title: Heat input and shielding environment effect on CMT-WAAM of IN718
Authors: Kumar P.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062241262217
Published: October 2024
|
Type: Article
Keywords: bead geometry | CMT | hardness | IN718 | shielding gas | Taguchi
Volume: 238
Pages: 10026-10044
ISSN/eISSN: 09544062/20412983
|
Citations: 4
Article #:
Source ID: 20407
Funding:
|
| 114 |
Title: Modeling and static analysis of porous functionally graded and FG-sandwich plates
Authors: Singh H.
Journal: Structures
DOI: 10.1016/j.istruc.2024.107034
Published: October 2024
|
Type: Article
Keywords: Functionally graded plates | Navier solution | Porous plates | Sandwich plates
Volume: 68
Pages:
ISSN/eISSN: /23520124
|
Citations: 2
Article #: 107034
Source ID: 21100372467
Funding: Defence Research and Development Organisation
|
| 115 |
Title: Genetically optimised SMOTE-based adversarial discriminative domain adaptation for rotor fault diagnosis at variable operating conditions
Authors: Rajagopalan S.
Journal: Measurement Science and Technology
DOI: 10.1088/1361-6501/ad5b7d
Published: October 2024
|
Type: Article
Keywords: adversarial discriminative domain adaptation (ADDA) | deep learning | fault diagnosis | genetic algorithm | machine learning | rotor mass imbalance | synthetic minority oversampling technique (SMOTE)
Volume: 35
Pages:
ISSN/eISSN: 09570233/13616501
|
Citations: 2
Article #: 106109
Source ID: 15526
Funding: Thapar Institute of Engineering and Technology
|
| 116 |
Title: Experimental investigations and dimensional analysis modeling for mechanical properties of polycarbonate samples developed by fused filament fabrication process
Authors: Faroze F.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-024-14446-2
Published: October 2024
|
Type: Article
Keywords: Compression strength | Dimensional analysis | Fused filament fabrication (FFF) | Tensile strength; Flexural strength
Volume: 134
Pages: 5537-5558
ISSN/eISSN: 02683768/14333015
|
Citations: 2
Article #:
Source ID: 20428
Funding:
|
| 117 |
Title: Pre-treatment and its effect on the thermal conductivity of natural lignocellulosic rice straw stubble waste boards: Analysis vis a vis potential for the civil engineering applications
Authors: Javaid A.
Journal: Construction and Building Materials
DOI: 10.1016/j.conbuildmat.2024.137903
Published: 27 September 2024
|
Type: Article
Keywords: Characterization | Composite | Epoxy | Resin | Rice (Oryza sativa) straw | Thermal insulation
Volume: 445
Pages:
ISSN/eISSN: 09500618/
|
Citations: 4
Article #: 137903
Source ID: 24443
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 118 |
Title: Green Manufacturing and Materials Processing Methods: Characterizations, Applications, and Design
Authors: Kaushal S.
Journal: Green Manufacturing and Materials Processing Methods Characterizations Applications and Design
DOI: 10.1201/9781003449225
Published: 16 September 2024
|
Type: Book
Keywords:
Volume:
Pages: 1-176
ISSN/eISSN: /
|
Citations: 2
Article #:
Source ID: 21101245395
Funding:
|
| 119 |
Title: Microwave-processed casting: A green manufacturing approach
Authors: Pal J.
Journal: Green Manufacturing and Materials Processing Methods Characterizations Applications and Design
DOI: 10.1201/9781003449225-4
Published: 16 September 2024
|
Type: Book Chapter
Keywords:
Volume:
Pages: 44-63
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101245395
Funding:
|
| 120 |
Title: Conversion of cool-to-warm orange-reddish light emitting diode by Sm2O3 addition in magnesium borosilicate glasses
Authors: Kumar S.
Journal: Journal of Molecular Structure
DOI: 10.1016/j.molstruc.2024.138432
Published: 15 September 2024
|
Type: Article
Keywords: Glass | Luminescence | Raman spectroscopy | Rare-Earth oxide | Structural units
Volume: 1312
Pages:
ISSN/eISSN: 00222860/
|
Citations: 8
Article #: 138432
Source ID: 24642
Funding: Thapar Institute of Engineering and Technology
|
| 121 |
Title: Structure–property correlation of silicate glasses for automobile applications
Authors: Kumar S.
Journal: Journal of Non Crystalline Solids
DOI: 10.1016/j.jnoncrysol.2024.123084
Published: 1 September 2024
|
Type: Article
Keywords: Elastic modulus | Optical property | Silicate glass | Structural units | Thermal stability
Volume: 639
Pages:
ISSN/eISSN: 00223093/
|
Citations: 7
Article #: 123084
Source ID: 28547
Funding: Thapar Institute of Engineering and Technology
|
| 122 |
Title: Performance Analysis of a Designed Aerostatic Bearing with Effect of Surface Roughness
Authors: Jamwal K.S.
Journal: Iranian Journal of Science and Technology Transactions of Mechanical Engineering
DOI: 10.1007/s40997-023-00718-x
Published: September 2024
|
Type: Article
Keywords: Aerostatic bearing | Axial load | Design | Finishing methods | Journal | Load capacity | Pressure analysis | Radial load | Thrust | Velocity analysis
Volume: 48
Pages: 1363-1381
ISSN/eISSN: 22286187/23641835
|
Citations: 3
Article #:
Source ID: 21100217632
Funding:
|
| 123 |
Title: Estimation of the injection criteria for magnetic hyperthermia therapy based on tumor morphology
Authors: Singh A.
Journal: Biomedical Physics and Engineering Express
DOI: 10.1088/2057-1976/ad64d8
Published: September 2024
|
Type: Article
Keywords: immersed boundary method | intratumoral injection strategies | magnetic nanoparticle hyperthermia | tumor morphology
Volume: 10
Pages:
ISSN/eISSN: /20571976
|
Citations: 3
Article #: 055017
Source ID: 21100788266
Funding:
|
| 124 |
Title: Impact and torsional behavior of additive layer-manufactured biopolymer: An advancement for orthopedic applications
Authors: Sharma S.
Journal: Biopolymers
DOI: 10.1002/bip.23600
Published: September 2024
|
Type: Article
Keywords: additive layer manufacturing | biomaterial | biomedical | biopolymer | bone plates | crack propagation | delamination | impact strength | torque
Volume: 115
Pages:
ISSN/eISSN: 00063525/10970282
|
Citations: 2
Article #: e23600
Source ID: 25799
Funding:
|
| 125 |
Title: Surface integrity of pure titanium strips produced by large strain extrusion machining at varying speeds
Authors: Singh A.
Journal: Sadhana Academy Proceedings in Engineering Sciences
DOI: 10.1007/s12046-024-02572-2
Published: September 2024
|
Type: Article
Keywords: corrosion | Large strain extrusion machining | residual stresses | severe plastic deformation | surface | titanium
Volume: 49
Pages:
ISSN/eISSN: 02562499/09737677
|
Citations: 1
Article #: 220
Source ID: 23531
Funding:
|
| 126 |
Title: Flexural behavior of SS316-based metal matrix composite prepared through microwave heating
Authors: Pal J.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062241251981
Published: September 2024
|
Type: Article
Keywords: chromium carbide | flexural modulus | Flexural strength | metal matrix composite | three-point bend test
Volume: 238
Pages: 9049-9071
ISSN/eISSN: 09544062/20412983
|
Citations: 0
Article #:
Source ID: 20407
Funding:
|
| 127 |
Title: Influences of radial basis function approach on flexural analysis of laminated plate embedded on elastic medium foundation subjected to transverse load used in industries
Authors: Kumar C.
Journal: Multiscale and Multidisciplinary Modeling Experiments and Design
DOI: 10.1007/s41939-024-00462-y
Published: September 2024
|
Type: Article
Keywords: Elastic foundation | Flexural analysis | Laminated plate | Meshfree Technique | Radial basis function | Transverse loading
Volume: 7
Pages: 4067-4081
ISSN/eISSN: 25208160/25208179
|
Citations: 0
Article #:
Source ID: 21101022436
Funding:
|
| 128 |
Title: A review of the emerging approaches for developing multi-scale filler-reinforced epoxy nanocomposites with enhanced impact performance
Authors: Shelly D.
Journal: Polymer Composites
DOI: 10.1002/pc.28479
Published: 10 August 2024
|
Type: Review
Keywords: compatibilization | fiber-reinforced polymer composites (FRPCs) | impact strength | nano-clay | thermoplastic fibers
Volume: 45
Pages: 9647-9676
ISSN/eISSN: 02728397/15480569
|
Citations: 12
Article #:
Source ID: 14433
Funding: National Research Foundation of Korea
|
| 129 |
Title: Sustainable microwave processing and surface characterization of powdered tungsten reinforced copper metal matrix (Cu-Wx) castings
Authors: Kaushal S.
Journal: Results in Surfaces and Interfaces
DOI: 10.1016/j.rsurfi.2024.100249
Published: 1 August 2024
|
Type: Article
Keywords: Composites | Electrical resistivity | Microhardness | Microwave heating | Powder casting
Volume: 16
Pages:
ISSN/eISSN: /26668459
|
Citations: 4
Article #: 100249
Source ID: 21101162733
Funding:
|
| 130 |
Title: Influence of pulse frequency on microstructure, mechanical properties, and corrosion resistance of electrodeposited Ni-SiC composite coatings
Authors: Maurya R.
Journal: Materials Today Communications
DOI: 10.1016/j.mtcomm.2024.109977
Published: August 2024
|
Type: Article
Keywords: Composite coating | Corrosion rate | Hardness | Pulse electrodeposition
Volume: 40
Pages:
ISSN/eISSN: /23524928
|
Citations: 3
Article #: 109977
Source ID: 21100369777
Funding:
|
| 131 |
Title: Integrating extrusion process and additive manufacturing for biomedical breakthroughs
Authors: Sharma S.
Journal: International Journal on Interactive Design and Manufacturing
DOI: 10.1007/s12008-023-01632-x
Published: August 2024
|
Type: Review
Keywords: 3D Bioprinting | Additive manufacturing | Biomaterial | Biomedical | Extrusion | Implants
Volume: 18
Pages: 3547-3570
ISSN/eISSN: 19552513/19552505
|
Citations: 1
Article #:
Source ID: 12000154536
Funding:
|
| 132 |
Title: Investigating the material removal mechanism during magnetorheological finishing of extrusion punch surface
Authors: Chana A.
Journal: Nanofinishing of Materials for Advanced Industrial Applications
DOI: 10.1201/9781003496298-6
Published: 1 August 2024
|
Type: Book Chapter
Keywords:
Volume:
Pages: 91-116
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101230453
Funding:
|
| 133 |
Title: Development, Calibration and Validation of Time Series Analysis and Artificial Neural Network Joint Model for Urban Noise Prediction
Authors: Rossi D.
Journal: Applied Sciences Switzerland
DOI: 10.3390/app14167395
Published: August 2024
|
Type: Article
Keywords: acoustical noise | forecasting modeling | neural networks | time series analysis | urban pollution
Volume: 14
Pages:
ISSN/eISSN: /20763417
|
Citations: 0
Article #: 7395
Source ID: 21100829268
Funding:
|
| 134 |
Title: Selection of an optimum tilt angle of the conical cutting tool used for linear coal cutting process
Authors: Dewangan S.
Journal: Aip Conference Proceedings
DOI: 10.1063/5.0221501
Published: 3 July 2024
|
Type: Conference Paper
Keywords:
Volume: 2835
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 0
Article #: 020004
Source ID: 26916
Funding:
|
| 135 |
Title: Analytical study of temperature variation and estimation of heat affected zone in arc welded low carbon steel plates
Authors: Dewangan S.
Journal: Aip Conference Proceedings
DOI: 10.1063/5.0221502
Published: 3 July 2024
|
Type: Conference Paper
Keywords:
Volume: 2835
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 0
Article #: 020005
Source ID: 26916
Funding:
|
| 136 |
Title: Influence of WC-12Co reinforcement on sliding wear performance of stainless steel-based MMC processed in a microwave oven
Authors: Pal J.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062241228389
Published: July 2024
|
Type: Article
Keywords: cumulative weight loss | frictional coefficient | metal matrix composites | microhardness | Microwave hybrid heating | sliding wear
Volume: 238
Pages: 6643-6672
ISSN/eISSN: 09544062/20412983
|
Citations: 4
Article #:
Source ID: 20407
Funding:
|
| 137 |
Title: Finite element modeling to analyze creep behavior of functionally graded rotating discs with exponential reinforcement and thickness profiles
Authors: Singh R.
Journal: Archive of Applied Mechanics
DOI: 10.1007/s00419-024-02626-1
Published: July 2024
|
Type: Article
Keywords: Creep | FGM | Finite element | Rotating disc | Rupture time
Volume: 94
Pages: 2039-2058
ISSN/eISSN: 09391533/14320681
|
Citations: 4
Article #:
Source ID: 13952
Funding:
|
| 138 |
Title: Mechanical Behavior of 3D-Printed Schwarz Diamond-Structured Scaffolds for Tissue Engineering Applications
Authors: Agarwal R.
Journal: Strength of Materials
DOI: 10.1007/s11223-024-00690-0
Published: July 2024
|
Type: Article
Keywords: additive manufacturing | compressive strength | fused deposition modeling | scaffold | Schwarz diamond
Volume: 56
Pages: 774-784
ISSN/eISSN: 00392316/15739325
|
Citations: 1
Article #:
Source ID: 17968
Funding:
|
| 139 |
Title: Diamond machining of additively manufactured Ti6Al4V ELI: Newer mode of material removal challenging the current simulation tools
Authors: Khatri N.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2024.04.051
Published: 30 June 2024
|
Type: Article
Keywords: Additive manufacturing | Chip morphology | Diamond machining | Finite element model
Volume: 120
Pages: 378-390
ISSN/eISSN: 15266125/
|
Citations: 3
Article #:
Source ID: 27677
Funding: British Council
|
| 140 |
Title: Investigation of the geometric parameters on the performance of glass fiber reinforced polymer laminated mechanical joints under fatigue loading
Authors: Gupta A.
Journal: Polymer Composites
DOI: 10.1002/pc.28321
Published: 20 June 2024
|
Type: Article
Keywords: composite pin joint | failure modes | fatigue loading | geometric parameters | optimization | response surface methodology
Volume: 45
Pages: 8026-8036
ISSN/eISSN: 02728397/15480569
|
Citations: 0
Article #:
Source ID: 14433
Funding:
|
| 141 |
Title: Microstructure and mechanical behavior of coal-derived reduced graphene oxide reinforced AA7075 fabricated via friction stir processing
Authors: Singh A.
Journal: Materials Today Communications
DOI: 10.1016/j.mtcomm.2024.108973
Published: June 2024
|
Type: Article
Keywords: AA7075 | Composite | EBSD | FSP | Microstructure | RGO
Volume: 39
Pages:
ISSN/eISSN: /23524928
|
Citations: 8
Article #: 108973
Source ID: 21100369777
Funding: Thapar Institute of Engineering and Technology
|
| 142 |
Title: B2O3 anomaly effect on crystallization and mechanical properties of soda-lime silicate glasses
Authors: Kumar S.
Journal: Materials Today Communications
DOI: 10.1016/j.mtcomm.2024.109247
Published: June 2024
|
Type: Article
Keywords: Activation energy | Bulk crystallization | Makishima–Mackenzie model | Rocherulle model
Volume: 39
Pages:
ISSN/eISSN: /23524928
|
Citations: 4
Article #: 109247
Source ID: 21100369777
Funding: Thapar Institute of Engineering and Technology
|
| 143 |
Title: B2O3 anomaly effect on crystallization and mechanical properties of soda-lime silicate glasses
Authors: Kumar S.
Journal: Materials Today Communications
DOI: 10.1016/j.mtcomm.2024.109247
Published: June 2024
|
Type: Article
Keywords: Activation energy | Bulk crystallization | Makishima–Mackenzie model | Rocherulle model
Volume: 39
Pages:
ISSN/eISSN: /23524928
|
Citations: 4
Article #: 109247
Source ID: 21100369777
Funding: Thapar Institute of Engineering and Technology
|
| 144 |
Title: Investigation of sound absorption on a polymeric acoustic metamaterial using 3D printing process
Authors: Shah S.S.
Journal: Polymer Engineering and Science
DOI: 10.1002/pen.26717
Published: June 2024
|
Type: Article
Keywords: 3D printing | absorption coefficient | impedance tube | metamaterial | noise control | photopolymeric resin | thermoviscous model
Volume: 64
Pages: 2662-2674
ISSN/eISSN: 00323888/15482634
|
Citations: 3
Article #:
Source ID: 13695
Funding: Dassault Systèmes La Fondation
|
| 145 |
Title: The effect of the cyclic hornification on the hygromechanical and surface characteristics of rice stubble agriculture waste
Authors: Somal S.S.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/14644207231208350
Published: June 2024
|
Type: Article
Keywords: hornification | mechanical testing | moisture durability | Stubble waste | wettability
Volume: 238
Pages: 1114-1126
ISSN/eISSN: 14644207/20413076
|
Citations: 2
Article #:
Source ID: 20971
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 146 |
Title: Comparison of Tribological Characteristics of LM13/B4C and LM13/Ilmenite Composites at High-Temperature Conditions
Authors: Gupta R.
Journal: Journal of Tribology
DOI: 10.1115/1.4063811
Published: 1 May 2024
|
Type: Article
Keywords: abrasion | aluminum matrix composites | boron carbide | coefficient of thermal expansion | dry friction | hardness | high-temperature wear | ilmenite | SEM-EDS | surface properties and characterization | wear mechanisms
Volume: 146
Pages:
ISSN/eISSN: 07424787/15288897
|
Citations: 4
Article #: 051703
Source ID: 17014
Funding:
|
| 147 |
Title: Optimization of friction stir processing parameters for improving structural and mechanical properties in in situ AA5083-H111/Al–Fe composites
Authors: Singhal V.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062231211672
Published: May 2024
|
Type: Article
Keywords: AMCs | fracture analysis | grain size | L9 orthogonal array | mechanical properties
Volume: 238
Pages: 4477-4490
ISSN/eISSN: 09544062/20412983
|
Citations: 4
Article #:
Source ID: 20407
Funding:
|
| 148 |
Title: Nano-Modified Epoxy Coatings for Enhanced Corrosion Inhibition in Reinforcing Bars
Authors: Sharma N.
Journal: Transactions of the Indian Institute of Metals
DOI: 10.1007/s12666-023-03057-2
Published: May 2024
|
Type: Article
Keywords: Corrosion | Corrosion current | Epoxy coatings | Graphene oxide | Reduced graphene oxide | Ultrasonic-guided waves
Volume: 77
Pages: 1423-1431
ISSN/eISSN: 09722815/09751645
|
Citations: 3
Article #:
Source ID: 12149
Funding: Thapar Institute of Engineering and Technology
|
| 149 |
Title: Surface roughness investigation for a novel magnetorheological finishing of cylindrical blind hole surfaces using a single magnetic tool
Authors: Aggarwal A.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-024-04888-w
Published: May 2024
|
Type: Article
Keywords: Cylindrical blind hole surfaces | Finishing force, surface roughness | Magnetic field | Magnetorheological finishing | Process mechanism
Volume: 46
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 2
Article #: 322
Source ID: 71359
Funding:
|
| 150 |
Title: Monitoring and Restrengthening of Real Sized Corroded RC Beams with Acoustic Emission Technique and GFRP Sheets
Authors: Garhwal S.
Journal: Transactions of the Indian Institute of Metals
DOI: 10.1007/s12666-023-03252-1
Published: May 2024
|
Type: Article
Keywords: AE amplitude | AE technique | Corrosion | Cracking | Deflection | GFRP repairing
Volume: 77
Pages: 1443-1454
ISSN/eISSN: 09722815/09751645
|
Citations: 2
Article #:
Source ID: 12149
Funding: UK Research and Innovation
|
| 151 |
Title: A comparative investigation of the effects of temperature on the oxidation resistance of high-velocity oxy-fuel coating on AISI316L
Authors: Kumar N.
Journal: Physica Scripta
DOI: 10.1088/1402-4896/ad3c7a
Published: 1 May 2024
|
Type: Article
Keywords: AISI316L | cyclic oxidation | EDS | HVOF | SEM | XRD
Volume: 99
Pages:
ISSN/eISSN: 00318949/14024896
|
Citations: 2
Article #: 055031
Source ID: 29122
Funding: Thapar Institute of Engineering and Technology
|
| 152 |
Title: Experimental investigation on punch shear strength of poly lactic acid specimens for biomedical applications
Authors: Sharma S.
Journal: Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
DOI: 10.1177/09544119241245503
Published: May 2024
|
Type: Article
Keywords: analysis of variance (ANOVA) | Biomedical | poly lactic acid | punch shear strength | response surface methodology | statistical modeling
Volume: 238
Pages: 550-561
ISSN/eISSN: 09544119/20413033
|
Citations: 0
Article #:
Source ID: 16334
Funding:
|
| 153 |
Title: Synthesis and Electrochemical Corrosion Behaviour of High Entropy Alloys
Authors: Neeraj N.
Journal: Transactions of the Indian Institute of Metals
DOI: 10.1007/s12666-023-03076-z
Published: May 2024
|
Type: Article
Keywords: Corrosion current density | Corrosion potential | Electrochemical corrosion | High entropy alloys | Potentiodynamic polarization
Volume: 77
Pages: 1249-1256
ISSN/eISSN: 09722815/09751645
|
Citations: 0
Article #:
Source ID: 12149
Funding:
|
| 154 |
Title: Electrochemical hydrogen storage in carbon nitride electrode using modified reversible polymer electrolyte membrane fuel cell
Authors: Singh S.
Journal: International Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2024.02.378
Published: 10 April 2024
|
Type: Article
Keywords: Carbon nitride | Hydrogen energy | Modified reversible fuel cell | Proton flow battery | Solid state hydrogen storage
Volume: 62
Pages: 81-90
ISSN/eISSN: 03603199/
|
Citations: 7
Article #:
Source ID: 26991
Funding:
|
| 155 |
Title: Characterization of an activated carbon electrode made from coconut shell precursor for hydrogen storage applications
Authors: Singla M.K.
Journal: International Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2024.02.341
Published: 3 April 2024
|
Type: Editorial
Keywords: Activated carbon | Characterization | Charcoal | Chemical activation | Coconut shell | Hydrogen storage | Hydrogen tank | Physical activation
Volume: 61
Pages: 1417-1428
ISSN/eISSN: 03603199/
|
Citations: 7
Article #:
Source ID: 26991
Funding:
|
| 156 |
Title: Investigation and enhancement of mechanical properties of SS-316 weldment using TiO2-SiO2-Al2O3 hybrid flux
Authors: Kumar A.
Journal: International Journal on Interactive Design and Manufacturing
DOI: 10.1007/s12008-023-01198-8
Published: April 2024
|
Type: Article
Keywords: Bending analysis | Materials | Microhardness | Tensile strength | Welding
Volume: 18
Pages: 1557-1573
ISSN/eISSN: 19552513/19552505
|
Citations: 7
Article #:
Source ID: 12000154536
Funding:
|
| 157 |
Title: Traffic noise modelling at intersections in mid-sized cities: an artificial neural network approach
Authors: Yadav A.
Journal: Environmental Monitoring and Assessment
DOI: 10.1007/s10661-024-12547-9
Published: April 2024
|
Type: Article
Keywords: Artificial neural network | Honking | Intersection noise | Mutual information | Traffic noise modelling
Volume: 196
Pages:
ISSN/eISSN: 01676369/15732959
|
Citations: 4
Article #: 396
Source ID: 21482
Funding: UK Research and Innovation
|
| 158 |
Title: Developing pneumatic conveying classification diagram for powders
Authors: Saluja G.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2024.119671
Published: 1 April 2024
|
Type: Article
Keywords: Classification diagram | Flow mode | Loose poured bulk density | Particle size distribution | Pneumatic conveying
Volume: 438
Pages:
ISSN/eISSN: 00325910/1873328X
|
Citations: 3
Article #: 119671
Source ID: 13717
Funding: Thapar Institute of Engineering and Technology
|
| 159 |
Title: Experimental investigation of ultrasonic assisted coating on three-point bending behavior of 3D printed polymeric bone plates for biomedical applications
Authors: Sharma S.
Journal: Medical Engineering and Physics
DOI: 10.1016/j.medengphy.2024.104129
Published: April 2024
|
Type: Article
Keywords: 3D printing | Bone plate | Poly lactic acid (PLA) | Statistical modeling | Three-point bending strength | Ultrasonic vibrations
Volume: 126
Pages:
ISSN/eISSN: 13504533/18734030
|
Citations: 1
Article #: 104129
Source ID: 17817
Funding:
|
| 160 |
Title: Command shaped trajectory tracking control for a two-link flexible manipulator
Authors: Kumar S.
Journal: Multibody System Dynamics
DOI: 10.1007/s11044-023-09947-z
Published: April 2024
|
Type: Article
Keywords: Assumed mode method | Command shaping | Flexible manipulators | PD control | Trajectory tracking
Volume: 60
Pages: 581-597
ISSN/eISSN: 13845640/1573272X
|
Citations: 1
Article #:
Source ID: 14523
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 161 |
Title: Hydrogen storage in activated carbon for fuel cell-powered vehicles: A cost-effective and sustainable approach
Authors: Singla M.K.
Journal: International Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2024.01.117
Published: 8 March 2024
|
Type: Article
Keywords: Activated carbon | Fuel cell vehicle | Hybrid electric vehicle | Hydrogen storage | Ionic hydrogen
Volume: 58
Pages: 446-458
ISSN/eISSN: 03603199/
|
Citations: 5
Article #:
Source ID: 26991
Funding:
|
| 162 |
Title: Effect of cooling media on bead geometry, microstructure, and mechanical properties of wire arc additive manufactured IN718 alloy
Authors: Kumar P.
Journal: Advances in Manufacturing
DOI: 10.1007/s40436-023-00457-x
Published: March 2024
|
Type: Article
Keywords: Air cooling | Bead characteristics | Electron backscatter diffraction (EBSD) | IN718 | Microstructure | Water cooling
Volume: 12
Pages: 124-149
ISSN/eISSN: 20953127/21953597
|
Citations: 8
Article #:
Source ID: 21100310027
Funding:
|
| 163 |
Title: Effect of ultrafine-grained structure and chromium addition on corrosion resistance of Ni-Cr-Al alloys
Authors: Singh D.
Journal: Materials Characterization
DOI: 10.1016/j.matchar.2024.113774
Published: March 2024
|
Type: Article
Keywords: Electrochemical corrosion | Electrochemical impedance spectroscopy | Ni-Cr-Al alloys | Ultrafine-grained alloys | X-ray diffraction
Volume: 209
Pages:
ISSN/eISSN: 10445803/
|
Citations: 7
Article #: 113774
Source ID: 27289
Funding:
|
| 164 |
Title: Optimal Design of Quadcopter Chassis Using Generative Design and Lightweight Materials to Advance Precision Agriculture
Authors: Balayan A.
Journal: Machines
DOI: 10.3390/machines12030187
Published: March 2024
|
Type: Article
Keywords: 3D printing | generative design | lightweight drone chassis | lightweight material | precision agriculture | topology optimization | unmanned aerial vehicle
Volume: 12
Pages:
ISSN/eISSN: /20751702
|
Citations: 6
Article #: 187
Source ID: 21100838145
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 165 |
Title: Use of Proximity-Based Shaft Displacement Sensors for Rolling Element Bearing Fault Diagnosis
Authors: Singh J.
Journal: Journal of Vibration Engineering and Technologies
DOI: 10.1007/s42417-023-01138-6
Published: March 2024
|
Type: Article
Keywords: Ensemble empirical mode decomposition | Fault diagnosis | Rolling element bearing | TEO-AK
Volume: 12
Pages: 4571-4592
ISSN/eISSN: 25233920/25233939
|
Citations: 4
Article #:
Source ID: 21100364384
Funding:
|
| 166 |
Title: Analysis of convergence and stability of PSO for accurate estimation of the incipient faults of hydraulic pump
Authors: Singh U.K.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-024-04727-y
Published: March 2024
|
Type: Article
Keywords: Constriction coefficient | Fault diagnosis | Hydraulic pump | Inertia weight | Least-square error minimization | Particle swarm optimization
Volume: 46
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 2
Article #: 158
Source ID: 71359
Funding:
|
| 167 |
Title: Machine learning for forecasting the biomechanical behavior of orthopedic bone plates fabricated by fused deposition modeling
Authors: Sharma S.
Journal: Rapid Prototyping Journal
DOI: 10.1108/RPJ-02-2023-0042
Published: 23 February 2024
|
Type: Article
Keywords: Bone plates | Bones | Flexural strength | Fused deposition modeling | Machine learning | Polymers | Printing process parameters | Tensile strength
Volume: 30
Pages: 441-459
ISSN/eISSN: 13552546/
|
Citations: 7
Article #:
Source ID: 21691
Funding:
|
| 168 |
Title: Sound absorption advancements: exploring 3D printing in the development of tetrakaidecahedron cell-based acoustic metamaterials
Authors: Shah S.S.
Journal: Rapid Prototyping Journal
DOI: 10.1108/RPJ-08-2023-0304
Published: 23 February 2024
|
Type: Article
Keywords: 3D printing | Absorption coefficient | Digital Light Processing | Impedance tube | Metamaterial | MultiJet fusion | Noise control | Tetrakaidecahedron | Thermoviscous model
Volume: 30
Pages: 609-619
ISSN/eISSN: 13552546/
|
Citations: 5
Article #:
Source ID: 21691
Funding: Strategiske Forskningsråd
|
| 169 |
Title: VMD-Based Ensembled SMOTEBoost for Imbalanced Multi-class Rotor Mass Imbalance Fault Detection and Diagnosis Under Industrial Noise
Authors: Rajagopalan S.
Journal: Journal of Vibration Engineering and Technologies
DOI: 10.1007/s42417-023-00920-w
Published: February 2024
|
Type: Article
Keywords: Data imbalance | Fault detection | Fault diagnosis | Machine learning | Shaft imbalance | SMOTEBoost
Volume: 12
Pages: 1457-1478
ISSN/eISSN: 25233920/25233939
|
Citations: 8
Article #:
Source ID: 21100364384
Funding:
|
| 170 |
Title: Performance evaluation of an automobile radiator using CuO/glycerol based nanocoolant
Authors: Jain P.
Journal: Heat and Mass Transfer Waerme Und Stoffuebertragung
DOI: 10.1007/s00231-023-03430-3
Published: February 2024
|
Type: Article
Keywords:
Volume: 60
Pages: 209-230
ISSN/eISSN: 09477411/14321181
|
Citations: 7
Article #:
Source ID: 13749
Funding: Thapar Institute of Engineering and Technology
|
| 171 |
Title: Development of iron-based composite materials through electromagnetic radiations in a domestic microwave oven
Authors: Pal J.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062231181832
Published: February 2024
|
Type: Article
Keywords: characterization | Composite castings | grain size | iron-based alloy SS316 | microwave hybrid heating
Volume: 238
Pages: 949-970
ISSN/eISSN: 09544062/20412983
|
Citations: 4
Article #:
Source ID: 20407
Funding:
|
| 172 |
Title: Experimental investigation on magnetorheological fine finishing of EN-8 steel alloy mold surface for cylindrical plastic bottle caps
Authors: Paswan S.K.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089221143887
Published: February 2024
|
Type: Article
Keywords: circularity | fine finishing | polishing fluid | Rotational magnetorheological honing | surface roughness | waviness
Volume: 238
Pages: 309-319
ISSN/eISSN: 09544089/20413009
|
Citations: 3
Article #:
Source ID: 20408
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 173 |
Title: Influence of tungsten carbide-cobalt reinforcement on flexural behavior of iron-based composite developed through microwave
Authors: Pal J.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062231181826
Published: February 2024
|
Type: Article
Keywords: flexural strength | metal matrix composites | micro hardness | microwave hybrid heating | SS316 | tungsten carbide
Volume: 238
Pages: 926-948
ISSN/eISSN: 09544062/20412983
|
Citations: 3
Article #:
Source ID: 20407
Funding:
|
| 174 |
Title: Investigation on fluid jet polishing of AISI H13 die steel using a single nozzle tool
Authors: Choudhary S.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089221145481
Published: February 2024
|
Type: Article
Keywords: abrasive slurry | AISI H13 | Fluid jet polishing | SiC | surface roughness
Volume: 238
Pages: 383-395
ISSN/eISSN: 09544089/20413009
|
Citations: 2
Article #:
Source ID: 20408
Funding:
|
| 175 |
Title: A review of regularization strategies and solution techniques for ill-posed inverse problems, with application to inverse heat transfer problems
Authors: Singhal M.
Journal: Reviews in Mathematical Physics
DOI: 10.1142/S0129055X23300078
Published: 1 February 2024
|
Type: Review
Keywords: ill-posedness | Inverse heat transfer problems | optimization methods | regularization | review | wavelets
Volume: 36
Pages:
ISSN/eISSN: 0129055X/17936659
|
Citations: 2
Article #: 2330007
Source ID: 29716
Funding:
|
| 176 |
Title: Comparison of different failure criteria in numerical modeling of electron beam cured polymer nanocomposites
Authors: Kumar M.
Journal: Journal of Composite Materials
DOI: 10.1177/00219983241227313
Published: February 2024
|
Type: Article
Keywords: carbon fibre | failure criterion | multiwalled carbon nanotubes | pin joints | polymer composite | Progressive damage analysis
Volume: 58
Pages: 533-545
ISSN/eISSN: 00219983/1530793X
|
Citations: 2
Article #:
Source ID: 21140
Funding: Bhabha Atomic Research Centre
|
| 177 |
Title: Effect of cylindrical heat pipes on electrochemical hydrogen adsorption within a carbon electrode employed in a modified reversible PEM fuel cell
Authors: Singh R.
Journal: International Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2023.09.045
Published: 2 January 2024
|
Type: Article
Keywords: Acidic electrolyte | Activated carbon | Cylindrical heat pipe | Electrochemical hydrogen storage | Reversible fuel cell | Thermal management
Volume: 52
Pages: 406-419
ISSN/eISSN: 03603199/
|
Citations: 4
Article #:
Source ID: 26991
Funding:
|
| 178 |
Title: Low-Frequency Adaptation-Deep Neural Network-Based Domain Adaptation Approach for Shaft Imbalance Fault Diagnosis
Authors: Arora J.K.
Journal: Journal of Vibration Engineering and Technologies
DOI: 10.1007/s42417-022-00848-7
Published: January 2024
|
Type: Article
Keywords: Autoencoder | Deep neural network | Domain adaptation | Feature adaptation | Mass imbalance | Shaft imbalance | The industrial revolution
Volume: 12
Pages: 375-394
ISSN/eISSN: 25233920/25233939
|
Citations: 9
Article #:
Source ID: 21100364384
Funding:
|
| 179 |
Title: Fracture analysis of CNT reinforced FG structures under thermo-mechanical loading using XIGA framework
Authors: Yadav A.
Journal: Mechanics of Advanced Materials and Structures
DOI: 10.1080/15376494.2022.2158501
Published: 2024
|
Type: Article
Keywords: equivalent properties | FGM | MWCNT | SWCNT | thermo-mechanical load | XIGA
Volume: 31
Pages: 2417-2437
ISSN/eISSN: 15376494/15376532
|
Citations: 9
Article #:
Source ID: 17827
Funding: Science and Engineering Research Board
|
| 180 |
Title: Fracture analysis of CNT reinforced FG structures under thermo-mechanical loading using XIGA framework
Authors: Yadav A.
Journal: Mechanics of Advanced Materials and Structures
DOI: 10.1080/15376494.2022.2158501
Published: 2024
|
Type: Article
Keywords: equivalent properties | FGM | MWCNT | SWCNT | thermo-mechanical load | XIGA
Volume: 31
Pages: 2417-2437
ISSN/eISSN: 15376494/15376532
|
Citations: 9
Article #:
Source ID: 17827
Funding: Science and Engineering Research Board
|
| 181 |
Title: Optimization of polydopamine coating process for poly lactic acid-based 3D printed bone plates using machine learning approaches
Authors: Sharma S.
Journal: Polymer Engineering and Science
DOI: 10.1002/pen.26546
Published: January 2024
|
Type: Article
Keywords: biomechanical flexural strength | biomechanical tensile strength | bone plates | machine learning | polydopamine | process optimization
Volume: 64
Pages: 279-295
ISSN/eISSN: 00323888/15482634
|
Citations: 8
Article #:
Source ID: 13695
Funding:
|
| 182 |
Title: Optimization of polydopamine coating process for poly lactic acid-based 3D printed bone plates using machine learning approaches
Authors: Sharma S.
Journal: Polymer Engineering and Science
DOI: 10.1002/pen.26546
Published: January 2024
|
Type: Article
Keywords: biomechanical flexural strength | biomechanical tensile strength | bone plates | machine learning | polydopamine | process optimization
Volume: 64
Pages: 279-295
ISSN/eISSN: 00323888/15482634
|
Citations: 8
Article #:
Source ID: 13695
Funding:
|
| 183 |
Title: Enhancing microstructural properties of copper-based composite castings through microwave-assisted reinforcement with MWCNT
Authors: Bashir K.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/14644207241301343
Published: 2024
|
Type: Article
Keywords: Cu-MWCNT casting | Mechanical characterization | Microwave hybrid heating
Volume:
Pages:
ISSN/eISSN: 14644207/20413076
|
Citations: 6
Article #:
Source ID: 20971
Funding:
|
| 184 |
Title: Enhancing upgraded solar still performance in summer and winter through nanofluid-based solar collectors
Authors: Singh J.
Journal: Desalination and Water Treatment
DOI: 10.1016/j.dwt.2024.100241
Published: January 2024
|
Type: Article
Keywords: Nanofluid | Solar collector | Solar distillation | Solar still | Summer-winter
Volume: 317
Pages:
ISSN/eISSN: 19443994/19443986
|
Citations: 6
Article #: 100241
Source ID: 19700175585
Funding:
|
| 185 |
Title: Review of solution methodologies for structural analysis of composites
Authors: Dhuria M.
Journal: European Journal of Mechanics A Solids
DOI: 10.1016/j.euromechsol.2023.105157
Published: 1 January 2024
|
Type: Article
Keywords: Analytical solution | Annular sector plates | Composite laminated plates | FGM plates | Mechanical responses | Modeling and analysis | Numerical solution | Structural analysis
Volume: 103
Pages:
ISSN/eISSN: 09977538/
|
Citations: 6
Article #: 105157
Source ID: 13877
Funding: Council of Scientific and Industrial Research, India
|
| 186 |
Title: Review of solution methodologies for structural analysis of composites
Authors: Dhuria M.
Journal: European Journal of Mechanics A Solids
DOI: 10.1016/j.euromechsol.2023.105157
Published: 1 January 2024
|
Type: Article
Keywords: Analytical solution | Annular sector plates | Composite laminated plates | FGM plates | Mechanical responses | Modeling and analysis | Numerical solution | Structural analysis
Volume: 103
Pages:
ISSN/eISSN: 09977538/
|
Citations: 6
Article #: 105157
Source ID: 13877
Funding: Council of Scientific and Industrial Research, India
|
| 187 |
Title: Modeling minimum transport boundary for pneumatic conveying of powders
Authors: Saluja G.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2023.2258347
Published: 2024
|
Type: Article
Keywords: conveying air density | loose poured bulk density | minimum transport criteria | modified particle froude number | particle size | Pneumatic conveying
Volume: 42
Pages: 418-426
ISSN/eISSN: 02726351/15480046
|
Citations: 5
Article #:
Source ID: 13661
Funding: Thapar Institute of Engineering and Technology
|
| 188 |
Title: Detection of multiple tumors through temperature response of a human brain using inverse bioheat transfer based on swarm optimization
Authors: Singhal M.
Journal: Thermal Science and Engineering Progress
DOI: 10.1016/j.tsep.2023.102315
Published: January 2024
|
Type: Article
Keywords: Bioheat transfer | Grey wolf cuckoo search optimization | Hybrid optimization algorithm | Inverse analysis | Regularization | Whale optimization algorithm
Volume: 47
Pages:
ISSN/eISSN: /24519049
|
Citations: 4
Article #: 102315
Source ID: 21100842663
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 189 |
Title: Performance analysis of genetically optimized 1D-convolutional neural network architecture for rotor system fault detection and diagnosis
Authors: Rajagopalan S.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089241235707
Published: 2024
|
Type: Article
Keywords: CNN | condition monitoring | deep learning | fault diagnosis | genetic algorithm | Industry 4.0 | mass imbalance | multifunctional structure | vibration analysis
Volume:
Pages:
ISSN/eISSN: 09544089/20413009
|
Citations: 4
Article #:
Source ID: 20408
Funding:
|
| 190 |
Title: Predicting pneumatic conveyability and flowability of fly ash using bulk property characterization
Authors: Saluja G.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2023.2261420
Published: 2024
|
Type: Article
Keywords: angle of repose | flowability | Fly ash | hausner ratio | pneumatic conveying
Volume: 42
Pages: 482-494
ISSN/eISSN: 02726351/15480046
|
Citations: 3
Article #:
Source ID: 13661
Funding: Thapar Institute of Engineering and Technology
|
| 191 |
Title: An investigation into static angle of repose using pharmaceutical powders
Authors: Poddar R.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2023.2250299
Published: 2024
|
Type: Article
Keywords: heap analysis | Powder flowability | powder Froude number | shear cell test | static angle of repose
Volume: 42
Pages: 344-353
ISSN/eISSN: 02726351/15480046
|
Citations: 3
Article #:
Source ID: 13661
Funding:
|
| 192 |
Title: Investigation of mechanical properties and microstructure characterisation of MMA-MIG-TIG-SAW welded EN8 steel joints via shot blasting method
Authors: Babbar A.
Journal: Journal of Adhesion Science and Technology
DOI: 10.1080/01694243.2023.2283974
Published: 2024
|
Type: Article
Keywords: microhardness | microstructure | Shot blasting | tensile strength | welding
Volume: 38
Pages: 2000-2018
ISSN/eISSN: 01694243/15685616
|
Citations: 2
Article #:
Source ID: 13664
Funding:
|
| 193 |
Title: EXPERIMENTAL INVESTIGATION INTO MAGNETORHEOLOGICAL FINISHING OF POLYMER VALVE SEAT SURFACE FOR BALL VALVE PERFORMANCE
Authors: Arora K.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X25500027
Published: 2024
|
Type: Article
Keywords: dimensional accuracy | electromagnetic tool | hemispherical tool surface | magnetorheological finishing | Polymer valve seat | surface morphology | surface roughness
Volume:
Pages:
ISSN/eISSN: 0218625X/17936667
|
Citations: 2
Article #: 2550002
Source ID: 18374
Funding:
|
| 194 |
Title: An experimental investigation into sifting and fluidization segregation characteristics for coal fly ash
Authors: Poddar R.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2023.2265313
Published: 2024
|
Type: Article
Keywords: angle of repose | cohesion | segregation index | Sifting and fluidization segregation | terminal settling velocity
Volume: 42
Pages: 515-526
ISSN/eISSN: 02726351/15480046
|
Citations: 2
Article #:
Source ID: 13661
Funding: Thapar Institute of Engineering and Technology
|
| 195 |
Title: Medical Imaging and Analysis of Thermal Necrosis During Bone Grinding: Implementation of Non-dominated Sorting Genetic Algorithm (NSGA-III) in Healthcare
Authors: Babbar A.
Journal: Current Medical Imaging
DOI: 10.2174/0115734056284074231222042746
Published: 2024
|
Type: Article
Keywords: Bone grinding | Energy dispersive spectroscopy | Histopathology | Imaging | NSGA-III | Optimization | Surface electron microscopy
Volume: 20
Pages:
ISSN/eISSN: 15734056/18756603
|
Citations: 1
Article #: e15734056284074
Source ID: 4700152432
Funding:
|
| 196 |
Title: Micro-mechanical investigation of maraging steel during in-situ tensile test
Authors: Setia P.
Journal: Philosophical Magazine
DOI: 10.1080/14786435.2024.2329984
Published: 2024
|
Type: Article
Keywords: atomic force microscopy (AFM); | Grain boundaries | grain boundary character distribution (GBCD) | microstructure | plastic deformation | slip trace
Volume: 104
Pages: 579-589
ISSN/eISSN: 14786435/14786443
|
Citations: 1
Article #:
Source ID: 15300154849
Funding:
|
| 197 |
Title: Modelling and Motion Analysis of an Automotive Seating Track Using Finite Element Analysis
Authors: Zode S.
Journal: Applications of Modelling and Simulation
DOI:
Published: 2024
|
Type: Article
Keywords: Bond graphs | Finite element analysis | Motion analysis | Seat slider mechanism
Volume: 8
Pages: 40-47
ISSN/eISSN: /26008084
|
Citations: 1
Article #:
Source ID: 21101181958
Funding:
|
| 198 |
Title: Deep learning-based temperature prediction during rotary ultrasonic bone drilling
Authors: Agarwal Y.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089241279242
Published: 2024
|
Type: Article
Keywords: bone damage | Bone drilling | deep learning | rotary ultrasonic bone drilling | temperature prediction
Volume:
Pages:
ISSN/eISSN: 09544089/20413009
|
Citations: 1
Article #:
Source ID: 20408
Funding: Science and Engineering Research Board
|
| 199 |
Title: Deep learning-based temperature prediction during rotary ultrasonic bone drilling
Authors: Agarwal Y.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089241279242
Published: 2024
|
Type: Article
Keywords: bone damage | Bone drilling | deep learning | rotary ultrasonic bone drilling | temperature prediction
Volume:
Pages:
ISSN/eISSN: 09544089/20413009
|
Citations: 1
Article #:
Source ID: 20408
Funding: Science and Engineering Research Board
|
| 200 |
Title: Performance evaluation of 3D printed acoustic metamaterial using soft computing approach
Authors: Shah S.S.
Journal: Mechanics of Advanced Materials and Structures
DOI: 10.1080/15376494.2024.2423283
Published: 2024
|
Type: Article
Keywords: 3D printing | absorption coefficient | DENORMS | machine learning | Metamaterial | modelling | noise control
Volume:
Pages:
ISSN/eISSN: 15376494/15376532
|
Citations: 0
Article #:
Source ID: 17827
Funding: European Cooperation in Science and Technology
|
| 201 |
Title: Modeling pressure drop in curvature and reacceleration zones in bends during pneumatic conveying of fine powders
Authors: Sharma A.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2023.2255865
Published: 2024
|
Type: Article
Keywords: bends | fine powders | Pneumatic conveying | reacceleration zone | solids friction
Volume: 42
Pages: 377-392
ISSN/eISSN: 02726351/15480046
|
Citations: 0
Article #:
Source ID: 13661
Funding:
|
| 202 |
Title: Characterization and optimization for mechanical and wear performance of reinforced Nylon-12/carbon fiber matrix
Authors: Rath D.
Journal: Journal of Reinforced Plastics and Composites
DOI: 10.1177/07316844241307079
Published: 2024
|
Type: Article
Keywords: Carbon fiber (CF) | composite characterization | fused deposition modeling (FDM) printing | Nylon 12 | reinforcement
Volume:
Pages:
ISSN/eISSN: 07316844/15307964
|
Citations: 0
Article #:
Source ID: 21185
Funding:
|
| 203 |
Title: Interaction of waves with a sliding viscoelastic layer
Authors: Kumar P.
Journal: Waves in Random and Complex Media
DOI: 10.1080/17455030.2021.1989080
Published: 2024
|
Type: Article
Keywords: Bulk wave | sliding velocity | viscoelastic layer
Volume: 34
Pages: 4152-4171
ISSN/eISSN: 17455030/17455049
|
Citations: 0
Article #:
Source ID: 145515
Funding:
|
| 204 |
Title: Productivity Enhancement of Solar Still Using Shallow Solar Pond
Authors: Singh S.K.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-97-4500-5_15
Published: 2024
|
Type: Conference Paper
Keywords: Clean energy | Solar distillation | Solar pond | Solar still
Volume:
Pages: 205-213
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 205 |
Title: Design and Development of a Three-Link Rigid-Flexible Manipulator
Authors: Kumar S.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-99-4270-1_11
Published: 2024
|
Type: Conference Paper
Keywords: CAD model | Experimental setup | Fabrication | Flexible manipulators
Volume:
Pages: 109-117
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 206 |
Title: In-situ experimental investigation using chemical-assisted rotary ultrasonic drilling process on fragile material
Authors: Sharma A.
Journal: International Journal on Interactive Design and Manufacturing
DOI: 10.1007/s12008-024-01760-y
Published: 2024
|
Type: Article
Keywords: Chemical-assisted rotary ultrasonic machining (CRUM) | Float glass | Hydrofluoric acid | Solar panel | Surface roughness | Tool wear
Volume:
Pages:
ISSN/eISSN: 19552513/19552505
|
Citations: 0
Article #:
Source ID: 12000154536
Funding:
|
| 207 |
Title: Efficiency Takes Flight: 3D-Printed A2212 Brushless Direct Current Outrunner Motor Propelling Next-Gen Drone Deliveries
Authors: Akula V.S.R.P.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-024-10525-3
Published: 2024
|
Type: Article
Keywords: 3D-printed motors & BLDC | A2212 | drone | PLA
Volume:
Pages:
ISSN/eISSN: 10599495/15441024
|
Citations: 0
Article #:
Source ID: 21160
Funding:
|
| 208 |
Title: Effect of Viscosity on Air Entrapment and Spreading of Molten Droplet in Thermal Spray Coating Deposition
Authors: Kumar S.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-99-5752-1_62
Published: 2024
|
Type: Conference Paper
Keywords: Air-bubble | CFD simulation | Solidification | Thermal spray | Viscosity
Volume:
Pages: 759-770
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 209 |
Title: Effect of Viscosity on Air Entrapment and Spreading of Molten Droplet in Thermal Spray Coating Deposition
Authors: Kumar S.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-99-5752-1_62
Published: 2024
|
Type: Conference Paper
Keywords: Air-bubble | CFD simulation | Solidification | Thermal spray | Viscosity
Volume:
Pages: 759-770
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 210 |
Title: Extended isogeometric analysis for fracture behavior of isothermally cracked single-walled carbon nanotube-reinforced composite exposed to thermo-mechanical load
Authors: Yadav A.
Journal: Enriched Numerical Techniques Implementation and Applications
DOI: 10.1016/B978-0-443-15362-4.00022-X
Published: 1 January 2024
|
Type: Book Chapter
Keywords: CNT | isothermal crack | SIF | SWCNT | thermo-mechanical fracture | XIGA
Volume:
Pages: 409-433
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101236940
Funding:
|
| 211 |
Title: Numerical Investigation of Debris Impact on Multi-layer Kevlar Shield
Authors: Sivakumar P.
Journal: Springer Proceedings in Materials
DOI: 10.1007/978-981-99-6030-9_5
Published: 2024
|
Type: Book Chapter
Keywords: Ballistic limit thickness | Hypervelocity impact | Multi-layer Kevlar | Residual velocity
Volume: 34
Pages: 47-57
ISSN/eISSN: 26623161/2662317X
|
Citations: 0
Article #:
Source ID: 21101082513
Funding:
|
| 212 |
Title: MAGNETORHEOLOGICAL FINISHING OF 3D PRINTED FREE-FORM AEROFOILED SURFACE
Authors: Khatri S.
Journal: ASME International Mechanical Engineering Congress and Exposition Proceedings Imece
DOI: 10.1115/IMECE2024-144723
Published: 2024
|
Type: Conference Paper
Keywords: 3D-printed aerofoil | magnetorheological polishing fluid (MRP) | Polylactic acid (PLA) | surface roughness (Ra)
Volume: 2
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #: V002T03A030
Source ID: 21101202014
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 213 |
Title: Thermophysical & photothermal characteristics of surfactant free graphene oxide, functionalized graphene oxide and reduced graphene oxide nanofluids
Authors: Sharma G.
Journal: Materials Science and Technology United Kingdom
DOI: 10.1177/02670836241274637
Published: 2024
|
Type: Article
Keywords: functionalized graphene oxide | graphene oxide | nanofluids | photothermal behaviour | reduced graphene oxide
Volume:
Pages:
ISSN/eISSN: 02670836/17432847
|
Citations: 0
Article #:
Source ID: 17815
Funding:
|
| 214 |
Title: Technologies for Sustainable Recycling and Disposal of LiB for EVs
Authors: Duvedi R.
Journal: 2024 IEEE 11th Uttar Pradesh Section International Conference on Electrical Electronics and Computer Engineering Upcon 2024
DOI: 10.1109/UPCON62832.2024.10982765
Published: 2024
|
Type: Conference Paper
Keywords: Battery chemistries | circular economy principles | design complexity | electrochemical | EVs | Global aspects. Cathode material | hydrometallurgical processes | Li-ion Battery | Policy framework and strategies | Product life estimations | pyrometallurgical | reutilization | Value chains sustainability | Value recovery
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101299621
Funding:
|
| 215 |
Title: EFFECT OF BURNING BIO-MASS FUEL ON THE CORROSION PERFORMANCE OF STEELS IN THE 34.5MW BOILER
Authors: Bhagria B.K.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X24500045
Published: 1 January 2024
|
Type: Article
Keywords: biomass fuel | boiler | Hot corrosion | SEM | steels
Volume: 31
Pages:
ISSN/eISSN: 0218625X/17936667
|
Citations: 0
Article #: 2450004
Source ID: 18374
Funding:
|
| 216 |
Title: EFFECT OF BURNING BIO-MASS FUEL ON THE CORROSION PERFORMANCE OF STEELS IN THE 34.5MW BOILER
Authors: Bhagria B.K.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X24500045
Published: 1 January 2024
|
Type: Article
Keywords: biomass fuel | boiler | Hot corrosion | SEM | steels
Volume: 31
Pages:
ISSN/eISSN: 0218625X/17936667
|
Citations: 0
Article #: 2450004
Source ID: 18374
Funding:
|
| 217 |
Title: The effect of physical properties of pond ash as a partial replacement of sand in the mortar mix
Authors: Kishor C.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2024.2364861
Published: 2024
|
Type: Article
Keywords: Compressive strength | drying shrinkage | flexural strength | mortar | pond ash
Volume: 42
Pages: 1178-1193
ISSN/eISSN: 02726351/15480046
|
Citations: 0
Article #:
Source ID: 13661
Funding:
|
| 218 |
Title: Mechanical properties of cross rolled CoCrFeMnNi high entropy alloy
Authors: Nakhate A.D.
Journal: Journal of Alloys and Compounds
DOI: 10.1016/j.jallcom.2023.172307
Published: 15 December 2023
|
Type: Article
Keywords: High entropy alloy | Mechanical properties | Microstructure | Rolling | Texture
Volume: 968
Pages:
ISSN/eISSN: 09258388/
|
Citations: 7
Article #: 172307
Source ID: 12325
Funding:
|
| 219 |
Title: Effect of nano-silica on fatigue behavior of glass fiber-reinforced epoxy composite laminates: A Weibull distribution approach
Authors: Gupta A.
Journal: Polymer Composites
DOI: 10.1002/pc.27761
Published: December 2023
|
Type: Article
Keywords: cyclic loading | damage pattern | fatigue behavior | Fiber Reinforced Polymer (FRP) composite laminate | glass-reinforced epoxy composite | nano-particles
Volume: 44
Pages: 9129-9140
ISSN/eISSN: 02728397/15480569
|
Citations: 15
Article #:
Source ID: 14433
Funding:
|
| 220 |
Title: Experimental investigations on polydopamine coated poly lactic acid based biomaterial fabricated using 3D printing for orthopedic applications
Authors: Sharma S.
Journal: Materials Chemistry and Physics
DOI: 10.1016/j.matchemphys.2023.128473
Published: 1 December 2023
|
Type: Article
Keywords: 3D printing | Biomaterial | Biomechanical strength | Poly lactic acid (PLA) | Polydopamine coating
Volume: 310
Pages:
ISSN/eISSN: 02540584/
|
Citations: 9
Article #: 128473
Source ID: 17800
Funding:
|
| 221 |
Title: Enhancing mechanical properties of polycarbonate parts developed by fused filament fabrication using RSM-TOPSIS hybrid approach
Authors: Faroze F.
Journal: Polymer Engineering and Science
DOI: 10.1002/pen.26517
Published: December 2023
|
Type: Article
Keywords: 3D printing | additive manufacturing | fused filament fabrication (FFF) | mechanical properties | RSM modeling | TOPSIS analysis
Volume: 63
Pages: 4186-4206
ISSN/eISSN: 00323888/15482634
|
Citations: 5
Article #:
Source ID: 13695
Funding:
|
| 222 |
Title: A coupled finite-volume immersed boundary method for the simulation of bioheat transfer in 3D complex tumor
Authors: Singh A.
Journal: Engineering with Computers
DOI: 10.1007/s00366-023-01797-9
Published: December 2023
|
Type: Article
Keywords: Bioheat transfer | Complex tumor morphology | Finite-volume method | Immersed boundary method | Penne’s bioheat model
Volume: 39
Pages: 3743-3758
ISSN/eISSN: 01770667/14355663
|
Citations: 5
Article #:
Source ID: 18186
Funding: Thapar Institute of Engineering and Technology
|
| 223 |
Title: Aluminum foam development by filling architecture techniques and process optimization
Authors: Kumar M.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/09544054221147979
Published: December 2023
|
Type: Article
Keywords: Aluminum foam | buried hole | compressive behavior | FSP | process optimization
Volume: 237
Pages: 2214-2226
ISSN/eISSN: 09544054/20412975
|
Citations: 3
Article #:
Source ID: 20406
Funding:
|
| 224 |
Title: Hygrothermal effect on strength of thermally cured glass epoxy nanocomposite made joints
Authors: Dhiman N.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062231164852
Published: December 2023
|
Type: Article
Keywords: bearing/failure load | Fiber reinforced polymer composites | hygrothermal aging | pin joints | water absorption
Volume: 237
Pages: 5692-5707
ISSN/eISSN: 09544062/20412983
|
Citations: 2
Article #:
Source ID: 20407
Funding:
|
| 225 |
Title: Application of PZT-Based Piezoelectric Element for Vibration Measurement and Rotor Fault Detection
Authors: Chaudhary R.
Journal: Iranian Journal of Science and Technology Transactions of Mechanical Engineering
DOI: 10.1007/s40997-023-00633-1
Published: December 2023
|
Type: Article
Keywords: Accelerometer | Cost-effective | Piezoelectric | Shaft unbalance | Vibration
Volume: 47
Pages: 2197-2210
ISSN/eISSN: 22286187/23641835
|
Citations: 1
Article #:
Source ID: 21100217632
Funding:
|
| 226 |
Title: Predicted performance bounds of thermochromism assisted photon transport for efficient solar thermal energy storage
Authors: Singh I.
Journal: International Journal of Heat and Mass Transfer
DOI: 10.1016/j.ijheatmasstransfer.2023.124518
Published: 15 November 2023
|
Type: Article
Keywords: Optical charging | Phase change material | Thermal energy storage | Thermochromism
Volume: 215
Pages:
ISSN/eISSN: 00179310/
|
Citations: 1
Article #: 124518
Source ID: 20448
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 227 |
Title: Thermal performance of fouling-resistant polymer nanocomposite coatings in heat exchangers
Authors: Sharma N.
Journal: International Journal of Heat and Mass Transfer
DOI: 10.1016/j.ijheatmasstransfer.2023.124512
Published: 15 November 2023
|
Type: Article
Keywords: Anti-fouling | Finite element analysis | Heat exchanger | Polymer coatings | Thermal analysis
Volume: 215
Pages:
ISSN/eISSN: 00179310/
|
Citations: 1
Article #: 124512
Source ID: 20448
Funding: Thapar Institute of Engineering and Technology
|
| 228 |
Title: Influence of post heat treatment on metallurgical, mechanical, and corrosion analysis of wire arc additive manufactured inconel 625
Authors: Sharma H.
Journal: Journal of Materials Research and Technology
DOI: 10.1016/j.jmrt.2023.11.074
Published: 1 November 2023
|
Type: Article
Keywords: Corrosion | Heat treatment | Inconel 625 | WAAM-CMT
Volume: 27
Pages: 5910-5923
ISSN/eISSN: 22387854/
|
Citations: 26
Article #:
Source ID: 21100383742
Funding:
|
| 229 |
Title: Three point bending and tensile properties of bio-additive polydopamine-coated 3D printing-based distal ulna small locking bone plates: Future need of orthopedic implants
Authors: Sharma S.
Journal: Journal of Vinyl and Additive Technology
DOI: 10.1002/vnl.21965
Published: November 2023
|
Type: Article
Keywords: 3D-printed bone plate | ANOVA | mechanical properties | polydopamine coating | polylactic acid | RSM
Volume: 29
Pages: 960-977
ISSN/eISSN: 10835601/15480585
|
Citations: 13
Article #:
Source ID: 13691
Funding: Thapar Institute of Engineering and Technology
|
| 230 |
Title: Effect of variation of WC reinforcement on metallurgical and cavitation erosion behavior of microwave processed NiCrSiC-WC composites clads
Authors: Bansal S.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062231164517
Published: November 2023
|
Type: Article
Keywords: Cavitation erosion | microhardness | microstructure | microwave processing | WC
Volume: 237
Pages: 5460-5475
ISSN/eISSN: 09544062/20412983
|
Citations: 10
Article #:
Source ID: 20407
Funding: Science and Engineering Research Board
|
| 231 |
Title: Tumor size dependent MNP dose evaluation in realistic breast tumor models for effective magnetic hyperthermia
Authors: Nain S.
Journal: Medical Engineering and Physics
DOI: 10.1016/j.medengphy.2023.104065
Published: November 2023
|
Type: Article
Keywords: Breast tumor size | Cancer thermal therapy | Magnetic nano-particle hyperthermia (MNH) | MNP dose | MNP injection strategies
Volume: 121
Pages:
ISSN/eISSN: 13504533/18734030
|
Citations: 4
Article #: 104065
Source ID: 17817
Funding: Thapar Institute of Engineering and Technology
|
| 232 |
Title: 3D printing for spine pathologies: a state-of-the-art review
Authors: Sharma S.
Journal: Biomedical Engineering Letters
DOI: 10.1007/s13534-023-00302-x
Published: November 2023
|
Type: Review
Keywords: 3-dimensional printing | Patient-specific implants | Preoperative planning | Spine surgeries | Surgical guides
Volume: 13
Pages: 579-589
ISSN/eISSN: 20939868/2093985X
|
Citations: 3
Article #:
Source ID: 21100204919
Funding:
|
| 233 |
Title: Experimental analysis of stability, thermal conductivity and photothermal behaviour of amine functionalised graphene oxide nanofluid
Authors: Sharma G.
Journal: Journal of Materials Research
DOI: 10.1557/s43578-023-01160-0
Published: 28 October 2023
|
Type: Article
Keywords: Functionalised graphene oxide | Nanofluids | Photothermal | Stability | Thermal conductivity | Viscosity
Volume: 38
Pages: 4465-4476
ISSN/eISSN: 08842914/20445326
|
Citations: 3
Article #:
Source ID: 21161
Funding: Council of Scientific and Industrial Research, India
|
| 234 |
Title: SiO2/B2O3 glass formers effect on transparency and mechanical properties of soda-lime borosilicate glasses for automobile applications
Authors: Kumar S.
Journal: Journal of Non Crystalline Solids
DOI: 10.1016/j.jnoncrysol.2023.122530
Published: 15 October 2023
|
Type: Article
Keywords: Coefficient of thermal expansion | FTIR | Glass | Raman spectroscopy | Transparency and mechanical properties
Volume: 618
Pages:
ISSN/eISSN: 00223093/
|
Citations: 34
Article #: 122530
Source ID: 28547
Funding: Thapar Institute of Engineering and Technology
|
| 235 |
Title: Modification of silicate structural units by K2O for enhancing automobile windshield glass properties
Authors: Kumar S.
Journal: Journal of Physics and Chemistry of Solids
DOI: 10.1016/j.jpcs.2023.111523
Published: October 2023
|
Type: Article
Keywords: Automobiles | Fourier transform infrared and Raman spectroscopy | Glasses | Optical band gap
Volume: 181
Pages:
ISSN/eISSN: 00223697/
|
Citations: 17
Article #: 111523
Source ID: 28564
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 236 |
Title: Synergistic effect of compatibilized nanoclay/polyethylene fibers on the impact strength of epoxy-glass fiber nanocomposites
Authors: Shelly D.
Journal: Polymer Composites
DOI: 10.1002/pc.27577
Published: October 2023
|
Type: Article
Keywords: compatibilization | fibers | impact resistance | mechanical properties | nanocomposites
Volume: 44
Pages: 6528-6541
ISSN/eISSN: 02728397/15480569
|
Citations: 14
Article #:
Source ID: 14433
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 237 |
Title: In-situ temperature monitoring during rotary ultrasonic-assisted drilling of fiber-reinforced composites
Authors: Shard A.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/08927057221142854
Published: October 2023
|
Type: Article
Keywords: carbon fiber-reinforced polyetherimide | cutting temperature | Polyetherimide composite | response surface methodology | ultrasonic power
Volume: 36
Pages: 3919-3942
ISSN/eISSN: 08927057/15307980
|
Citations: 7
Article #:
Source ID: 13690
Funding:
|
| 238 |
Title: Machine learning regression tools for erosion prediction of WC-10Co4Cr thermal spray coating
Authors: Singh J.
Journal: Results in Surfaces and Interfaces
DOI: 10.1016/j.rsurfi.2023.100156
Published: 1 October 2023
|
Type: Article
Keywords: HVOF coatings | Machine learning | Regression learning | Slurry erosion | Thermal spray | Wear
Volume: 13
Pages:
ISSN/eISSN: /26668459
|
Citations: 7
Article #: 100156
Source ID: 21101162733
Funding:
|
| 239 |
Title: High-Temperature Wear and Frictional Performance of Plasma-Nitrided AISI H13 Die Steel
Authors: Kumar A.
Journal: Lubricants
DOI: 10.3390/lubricants11100448
Published: October 2023
|
Type: Article
Keywords: AISI H13 | friction | high-temperature wear | plasma nitriding | SEM
Volume: 11
Pages:
ISSN/eISSN: /20754442
|
Citations: 6
Article #: 448
Source ID: 21100830703
Funding: Science and Engineering Research Board
|
| 240 |
Title: EXPERIMENTAL STUDIES on the SURFACE CHARACTERISTICS of BIMETALLIC JOINTS INTERFACE FABRICATED THROUGH MICROWAVE IRRADIATION
Authors: Kaushal S.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X23500683
Published: 1 October 2023
|
Type: Article
Keywords: hot corrosion | microstructure | microwave energy | Surface characteristics
Volume: 30
Pages:
ISSN/eISSN: 0218625X/17936667
|
Citations: 5
Article #: 2350068
Source ID: 18374
Funding:
|
| 241 |
Title: Flow characteristics of microwave treated Indian coal: A deep learning modelling
Authors: Singh H.
Journal: Advanced Powder Technology
DOI: 10.1016/j.apt.2023.104202
Published: October 2023
|
Type: Article
Keywords: Artificial Neural Networks | Coal water slurry | Microwave treatment | Non-coupling Coal | Physicochemical characteristics | Specific Enthalpy Consumption
Volume: 34
Pages:
ISSN/eISSN: 09218831/15685527
|
Citations: 3
Article #: 104202
Source ID: 16325
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 242 |
Title: An investigation into the thermo-fluid behavior of volumetrically heated cavities irradiated from the side
Authors: Singh A.
Journal: International Journal of Thermal Sciences
DOI: 10.1016/j.ijthermalsci.2023.108420
Published: October 2023
|
Type: Article
Keywords: Natural convection | Optical thickness | Volumetric absorption
Volume: 192
Pages:
ISSN/eISSN: 12900729/
|
Citations: 1
Article #: 108420
Source ID: 13761
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 243 |
Title: Optical, Structural and Mechanical Properties of Automobile Front Panel Windshield Glasses
Authors: Kumar S.
Journal: Silicon
DOI: 10.1007/s12633-023-02429-z
Published: September 2023
|
Type: Article
Keywords: Hardness | Optical properties | Windshield glasses
Volume: 15
Pages: 6229-6241
ISSN/eISSN: 1876990X/18769918
|
Citations: 14
Article #:
Source ID: 19400158637
Funding: Thapar Institute of Engineering and Technology
|
| 244 |
Title: Predicting biomechanical properties of additively manufactured polydopamine coated poly lactic acid bone plates using deep learning
Authors: Sharma S.
Journal: Engineering Applications of Artificial Intelligence
DOI: 10.1016/j.engappai.2023.106587
Published: September 2023
|
Type: Article
Keywords: AI/ML | Bone plates | Fused filament fabrication | Long short-term memory | Mechanical strength | Polydopamine
Volume: 124
Pages:
ISSN/eISSN: 09521976/
|
Citations: 9
Article #: 106587
Source ID: 24182
Funding: Thapar Institute of Engineering and Technology
|
| 245 |
Title: Preparation of graphitic carbon nitride (g-C3N4) for novel dielectric and photocatalytic dye removal applications
Authors: Gupta A.
Journal: Physica Scripta
DOI: 10.1088/1402-4896/ace563
Published: 1 September 2023
|
Type: Article
Keywords: conductivity | dielectric constant | graphitic carbon nitride | organic pollutants | photocatalytic degradation
Volume: 98
Pages:
ISSN/eISSN: 00318949/14024896
|
Citations: 7
Article #: 095904
Source ID: 29122
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 246 |
Title: PSO with improved local unimodal search ability for incipient pump fault identification
Authors: Singh U.K.
Journal: Sadhana Academy Proceedings in Engineering Sciences
DOI: 10.1007/s12046-023-02197-x
Published: September 2023
|
Type: Article
Keywords: acceleration coefficient | constriction coefficient | hydraulic pump | least-square error minimization | Particle swarm optimization
Volume: 48
Pages:
ISSN/eISSN: 02562499/09737677
|
Citations: 4
Article #: 172
Source ID: 23531
Funding:
|
| 247 |
Title: Asymmetric SiO2 structural units modification by Li2O and their effect on optical and mechanical properties of soda lime silicate glasses
Authors: Kumar S.
Journal: Ceramics International
DOI: 10.1016/j.ceramint.2023.05.143
Published: 15 August 2023
|
Type: Article
Keywords: Fracture toughness | FTIR and Raman spectroscopy | Glass | Hardness | Optical band gap | Transparency
Volume: 49
Pages: 26302-26312
ISSN/eISSN: 02728842/
|
Citations: 24
Article #:
Source ID: 21522
Funding: Thapar Institute of Engineering and Technology
|
| 248 |
Title: Role of a Unitized Regenerative Fuel Cell in Remote Area Power Supply: A Review
Authors: Singla M.K.
Journal: Energies
DOI: 10.3390/en16155761
Published: August 2023
|
Type: Review
Keywords: fuel cells | hybrid systems | hydrogen energy | remote area power supply | URFC
Volume: 16
Pages:
ISSN/eISSN: /19961073
|
Citations: 8
Article #: 5761
Source ID: 62932
Funding:
|
| 249 |
Title: Leveraging ultrasonic actuation during inclined orthopaedic bone drilling: An experimental and histological study
Authors: Agarwal R.
Journal: Applied Acoustics
DOI: 10.1016/j.apacoust.2023.109520
Published: August 2023
|
Type: Article
Keywords: Biomechanical pullout strength | Bone drilling | Cutting force | Inclination angle | Temperature elevation | Ultrasonic actuations
Volume: 211
Pages:
ISSN/eISSN: 0003682X/1872910X
|
Citations: 7
Article #: 109520
Source ID: 12946
Funding: Fondation Recherche Cancer et Sang
|
| 250 |
Title: Effect of tool pin profiles on the properties of foamable precursor developed by friction stir processing
Authors: Kumar M.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089221113562
Published: August 2023
|
Type: Article
Keywords: aluminum precursor | foam | Friction stir processing | hardness | pin profile
Volume: 237
Pages: 1367-1377
ISSN/eISSN: 09544089/20413009
|
Citations: 7
Article #:
Source ID: 20408
Funding:
|
| 251 |
Title: Computational analysis of bidirectional carbon fibre/epoxy nanocomposites using different failure criteria
Authors: Kumar M.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089221112375
Published: August 2023
|
Type: Article
Keywords: carbon fibre | Failure Criteria | Numerical modelling | polymer composite | progressive damage analysis
Volume: 237
Pages: 1286-1299
ISSN/eISSN: 09544089/20413009
|
Citations: 3
Article #:
Source ID: 20408
Funding: Bhabha Atomic Research Centre
|
| 252 |
Title: Investigation of tribological and metallurgical effects on Ti–6Al–4V laminates made by LSEM for Ti/GFRP stacked composite
Authors: Kumar P.
Journal: Wear
DOI: 10.1016/j.wear.2023.204860
Published: 15 July 2023
|
Type: Article
Keywords: Hardness | LSEM | Severe plastic deformation | Ti–6Al–4V | Wear
Volume: 524-525
Pages:
ISSN/eISSN: 00431648/
|
Citations: 2
Article #: 204860
Source ID: 22156
Funding:
|
| 253 |
Title: Bond Graph Modeling and LQR Based Neuro-Fuzzy Control of Spatial Inverted Pendulum
Authors: Chawla I.
Journal: ACM International Conference Proceeding Series
DOI: 10.1145/3610419.3610437
Published: 5 July 2023
|
Type: Conference Paper
Keywords: ANFIS | Inverted Pendulum | Neuro-Fuzzy Controller | Robust Controller | Underactuated Systems
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 1
Article #: 18
Source ID: 11600154611
Funding:
|
| 254 |
Title: Scientific Python (SciPy) based Simulation and Control of Underactuated Robotic System
Authors: Mavi H.S.
Journal: ACM International Conference Proceeding Series
DOI: 10.1145/3610419.3610457
Published: 5 July 2023
|
Type: Conference Paper
Keywords: Linear quadratic regulator (LQR) | Rotary inverted pendulum | Scientific Python (SciPy) | Simulink | Underactuated robotic system
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #: 38
Source ID: 11600154611
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 255 |
Title: Joint Space Trajectory Controller for Modular Reconfigurable Manipulator
Authors: Patel S.M.
Journal: ACM International Conference Proceeding Series
DOI: 10.1145/3610419.3610425
Published: 5 July 2023
|
Type: Conference Paper
Keywords: Control | Modular reconfigurable robot | Trajectory tracking
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #: 6
Source ID: 11600154611
Funding:
|
| 256 |
Title: Towards Trajectory Tracking Control of a Flexible Tube Manipulator
Authors: Bhatt N.
Journal: ACM International Conference Proceeding Series
DOI: 10.1145/3610419.3610424
Published: 5 July 2023
|
Type: Conference Paper
Keywords: flexible manipulator | shape memory alloy | square trajectory | Trajectory tracking
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #: 5
Source ID: 11600154611
Funding:
|
| 257 |
Title: Vibration suppression during trajectory tracking of a PRR manipulator
Authors: Kumar S.
Journal: ACM International Conference Proceeding Series
DOI: 10.1145/3610419.3610442
Published: 5 July 2023
|
Type: Conference Paper
Keywords: Assumed Mode Method | DeNOC matrices | Vibration suppression
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #: 23
Source ID: 11600154611
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 258 |
Title: Estimation of Ground Reaction Force for Coupled Dynamic Modelling and Control of the Lower Limb Exoskeleton
Authors: Chander S.A.
Journal: ACM International Conference Proceeding Series
DOI: 10.1145/3610419.3610456
Published: 5 July 2023
|
Type: Conference Paper
Keywords: Computed torque control | Euler -Lagrange method | Ground reaction force | Human walking | Lower-extremity exoskeleton
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #: 37
Source ID: 11600154611
Funding:
|
| 259 |
Title: Investigations on corrosion inhibition performance of self-healing nano-clay modified epoxy coatings
Authors: Sharma N.
Journal: Journal of Building Engineering
DOI: 10.1016/j.jobe.2023.106368
Published: 1 July 2023
|
Type: Article
Keywords: Concrete | Corrosion | Corrosion current | Epoxy coated rebar | Hybrid coating | Nano-clay | Self-healing | Structural health monitoring | Ultrasonic guided waves
Volume: 70
Pages:
ISSN/eISSN: /23527102
|
Citations: 12
Article #: 106368
Source ID: 21100389518
Funding: Thapar Institute of Engineering and Technology
|
| 260 |
Title: Advancement in biological and mechanical behavior of 3D printed poly lactic acid bone plates using polydopamine coating: Innovation for healthcare
Authors: Sharma S.
Journal: Journal of the Mechanical Behavior of Biomedical Materials
DOI: 10.1016/j.jmbbm.2023.105929
Published: July 2023
|
Type: Article
Keywords: Apatite growth | Biological solutions | Bone plates | Degradation rate | Polydopamine
Volume: 143
Pages:
ISSN/eISSN: 17516161/18780180
|
Citations: 9
Article #: 105929
Source ID: 8000153139
Funding:
|
| 261 |
Title: Influence of discontinuities on the fracture behaviour of CNT reinforced composites subjected to thermo-mechanical load using XIGA
Authors: Yadav A.
Journal: Journal of Strain Analysis for Engineering Design
DOI: 10.1177/03093247221122052
Published: July 2023
|
Type: Article
Keywords: adiabatic crack | CNT | discontinuity | SIF | Thermo-mechanical fracture | XIGA
Volume: 58
Pages: 389-409
ISSN/eISSN: 03093247/20413130
|
Citations: 4
Article #:
Source ID: 21189
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 262 |
Title: Discrete-Time Constrained Controller for Proportional Directional Control Valve-Based Electrohydraulic System With Parametric Uncertainty and Disturbances
Authors: Kumawat A.K.
Journal: Journal of Dynamic Systems Measurement and Control Transactions of the ASME
DOI: 10.1115/1.4062469
Published: July 2023
|
Type: Article
Keywords:
Volume: 145
Pages:
ISSN/eISSN: 00220434/15289028
|
Citations: 1
Article #: 071001
Source ID: 21141
Funding:
|
| 263 |
Title: Tribological characteristics of LM13 alloy based ilmenite-boron carbide reinforced hybrid composites for brake drum applications
Authors: Gupta R.
Journal: Wear
DOI: 10.1016/j.wear.2023.204851
Published: 1 June 2023
|
Type: Article
Keywords: Boron carbide | High temperature tribological properties | Hybrid aluminium matrix composites | Ilmenite
Volume: 522
Pages:
ISSN/eISSN: 00431648/
|
Citations: 12
Article #: 204851
Source ID: 22156
Funding:
|
| 264 |
Title: Directional fretting wear behaviour of constrained groove pressed aluminium sheet
Authors: Yadav P.C.
Journal: Materials Today Communications
DOI: 10.1016/j.mtcomm.2023.105669
Published: June 2023
|
Type: Article
Keywords: Constrained groove pressing (CGP) | Directional wear behaviour | Fretting wear | Severe plastic deformation (SPD)
Volume: 35
Pages:
ISSN/eISSN: /23524928
|
Citations: 4
Article #: 105669
Source ID: 21100369777
Funding: Indian Institute of Technology Kanpur
|
| 265 |
Title: Parametric experimental investigation of additive manufacturing-based distal ulna bone plate: a response surface methodology-based design approach
Authors: Sharma S.
Journal: Rapid Prototyping Journal
DOI: 10.1108/RPJ-06-2022-0205
Published: 2 May 2023
|
Type: Article
Keywords: ANOVA | Bone plate | Flexural strength | Fused deposition modeling (FDM) | Tensile strength
Volume: 29
Pages: 1080-1096
ISSN/eISSN: 13552546/
|
Citations: 15
Article #:
Source ID: 21691
Funding:
|
| 266 |
Title: A Systematic Review of Factors Affecting the Process Parameters and Various Measurement Techniques in Forging Processes
Authors: Sharma S.
Journal: Steel Research International
DOI: 10.1002/srin.202200529
Published: May 2023
|
Type: Review
Keywords: cold forging | die geometry | forging process monitoring | forging processes | hot forging | tool designs | tool life
Volume: 94
Pages:
ISSN/eISSN: 16113683/1869344X
|
Citations: 19
Article #: 2200529
Source ID: 28443
Funding:
|
| 267 |
Title: Performance prediction of DMUs using integrated DEA-SVR approach with imprecise data: application on Indian banks
Authors: Nishtha
Journal: Soft Computing
DOI: 10.1007/s00500-022-07739-9
Published: May 2023
|
Type: Article
Keywords: Data envelopment window analysis | Imprecise data | Malmquist productivity index (MPI) | Optimistic and Pessimistic environments | Support vector Regression
Volume: 27
Pages: 5325-5355
ISSN/eISSN: 14327643/14337479
|
Citations: 15
Article #:
Source ID: 28554
Funding:
|
| 268 |
Title: Reinforcement of compatibilized nanoclay/Inviya fibers to epoxy-based glass fiber nanocomposites for high-impact strength applications
Authors: Shelly D.
Journal: Archives of Civil and Mechanical Engineering
DOI: 10.1007/s43452-023-00610-0
Published: May 2023
|
Type: Article
Keywords: Compatibilization | Epoxy-based glass fiber composites | Impact strength | Inviya fibers | Tensile properties
Volume: 23
Pages:
ISSN/eISSN: 16449665/
|
Citations: 10
Article #: 84
Source ID: 14000156254
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 269 |
Title: A New Shear Deformation Theory in Axiomatic Framework for Bending and Buckling Analysis of Cross-Ply and Angle-Ply Laminated Composite Plates
Authors: Dhuria M.
Journal: Journal of Applied Mechanics Transactions ASME
DOI: 10.1115/1.4056647
Published: 1 May 2023
|
Type: Article
Keywords: analytical solution | buckling | cross-ply and angle-ply plates | laminated composites | shear deformation theory | static
Volume: 90
Pages:
ISSN/eISSN: 00218936/15289036
|
Citations: 5
Article #: 051004
Source ID: 20949
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 270 |
Title: Thermomechanical analysis of foulants and graphene platelets reinforced polymer matrix coated steel substrates
Authors: Sharma N.
Journal: Composite Structures
DOI: 10.1016/j.compstruct.2023.116848
Published: 1 May 2023
|
Type: Article
Keywords: Foulant corroded sheet | Micromechanical analysis | Nanocomposite coating | Numerical homogenization | Uncoupled thermo-mechanical analysis
Volume: 311
Pages:
ISSN/eISSN: 02638223/
|
Citations: 2
Article #: 116848
Source ID: 15063
Funding: Thapar Institute of Engineering and Technology
|
| 271 |
Title: Effect of welding parameters on bead characteristics and mechanical properties of wire and arc additive manufactured inconel 718
Authors: Kumar P.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062221133035
Published: April 2023
|
Type: Article
Keywords: bead geometry characteristics | columnar dendrites | current | EBSD | heat input | IN718 | Nb-rich precipitates | Taguchi | voltage | welding speed
Volume: 237
Pages: 1668-1691
ISSN/eISSN: 09544062/20412983
|
Citations: 15
Article #:
Source ID: 20407
Funding:
|
| 272 |
Title: Failure mechanism during incremental sheet forming of a commercial purity aluminum alloy
Authors: Kumar A.
Journal: Engineering Failure Analysis
DOI: 10.1016/j.engfailanal.2023.107090
Published: April 2023
|
Type: Article
Keywords: Failure analysis | Finite element analysis | Incremental sheet forming | Microstructure | Residual stress
Volume: 146
Pages:
ISSN/eISSN: 13506307/
|
Citations: 11
Article #: 107090
Source ID: 20593
Funding:
|
| 273 |
Title: Combined empirical mode decomposition and phase space reconstruction based psychologically stressed and non-stressed state classification from cardiac sound signals
Authors: Cheema A.
Journal: Biomedical Signal Processing and Control
DOI: 10.1016/j.bspc.2023.104585
Published: April 2023
|
Type: Article
Keywords: Cardiac sound signals | Empirical mode decomposition | Phase space reconstruction | Psychological stress
Volume: 82
Pages:
ISSN/eISSN: 17468094/17468108
|
Citations: 11
Article #: 104585
Source ID: 4700152237
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 274 |
Title: Parametric Study of the Spark Plasma Sintering Process on the Mechanical Properties of Multi-Layer Graphene Reinforced Ti6Al4V Nanocomposites
Authors: Sharma D.
Journal: Transactions of the Indian Institute of Metals
DOI: 10.1007/s12666-022-02811-2
Published: April 2023
|
Type: Article
Keywords: Analysis of variance | Central composite design | Elastic modulus | Hardness | Spark plasma sintering
Volume: 76
Pages: 1015-1025
ISSN/eISSN: 09722815/09751645
|
Citations: 2
Article #:
Source ID: 12149
Funding: Thapar Institute of Engineering and Technology
|
| 275 |
Title: A computationally efficient C0 continuous finite element model for thermo-mechanical analysis of cross-ply and angle-ply composite plates in non-polynomial axiomatic framework
Authors: Joshan Y.S.
Journal: Journal of Strain Analysis for Engineering Design
DOI: 10.1177/03093247221107194
Published: April 2023
|
Type: Article
Keywords: finite element method: thermo-mechanical analysis | Laminated composites | shear deformation theory
Volume: 58
Pages: 180-192
ISSN/eISSN: 03093247/20413130
|
Citations: 0
Article #:
Source ID: 21189
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 276 |
Title: Experimental and theoretical investigation into effectiveness of ZnO based transparent heat mirror covers in mitigating thermal losses in volumetric absorption based solar thermal systems
Authors: Singh N.
Journal: Solar Energy
DOI: 10.1016/j.solener.2023.02.057
Published: 15 March 2023
|
Type: Article
Keywords: Solar thermal | Thermal lossess | Transparent heat mirror (HM) | Volumetric absorption
Volume: 253
Pages: 439-452
ISSN/eISSN: 0038092X/
|
Citations: 8
Article #:
Source ID: 13333
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 277 |
Title: Three-dimensional printing of triply periodic minimal surface structured scaffolds for load-bearing bone defects
Authors: Agarwal R.
Journal: Polymer Engineering and Science
DOI: 10.1002/pen.26258
Published: March 2023
|
Type: Article
Keywords: fused filament fabrication | gyroid | primitive | scaffold | triply periodic minimal surface
Volume: 63
Pages: 972-985
ISSN/eISSN: 00323888/15482634
|
Citations: 19
Article #:
Source ID: 13695
Funding:
|
| 278 |
Title: Optimization of Cobalt Chrome 3D re-entrant Auxetics fabricated using Selective Laser Melting
Authors: Singh D.
Journal: Engineering Structures
DOI: 10.1016/j.engstruct.2022.115542
Published: 1 March 2023
|
Type: Article
Keywords: 3D printing | Cobalt Chrome | Design of Experiments | Digital Image Correlation | Optimization | Re-entrant Auxetics | Selective Laser Melting
Volume: 278
Pages:
ISSN/eISSN: 01410296/18737323
|
Citations: 13
Article #: 115542
Source ID: 15652
Funding: Trinity College, University of Oxford
|
| 279 |
Title: The Role of Morphology on Thermal and Electrical Properties of MWCNT-Doped-PVDF Nanocomposites
Authors: Agarwal R.
Journal: Journal of Inorganic and Organometallic Polymers and Materials
DOI: 10.1007/s10904-023-02535-w
Published: March 2023
|
Type: Article
Keywords: COOH/MWCNT | Nanocomposite membrane | PVDF | β-Phase polymorph
Volume: 33
Pages: 771-782
ISSN/eISSN: 15741443/15741451
|
Citations: 12
Article #:
Source ID: 4700152855
Funding: Thapar Institute of Engineering and Technology
|
| 280 |
Title: Tribological properties of hybrid aluminium matrix composites reinforced with boron carbide and ilmenite particles for brake rotor applications
Authors: Gupta R.
Journal: Archives of Civil and Mechanical Engineering
DOI: 10.1007/s43452-022-00569-4
Published: March 2023
|
Type: Article
Keywords: Ceramic particles | Dislocation density | Hardness | Hybrid aluminium matrix composites | Mineral particles | Room temperature wear property
Volume: 23
Pages:
ISSN/eISSN: 16449665/
|
Citations: 9
Article #: 47
Source ID: 14000156254
Funding:
|
| 281 |
Title: Effects of injection rates and tissue diffusivity in magnetic nano-particle hyperthermia
Authors: Singh G.
Journal: Medical Engineering and Physics
DOI: 10.1016/j.medengphy.2023.103965
Published: March 2023
|
Type: Article
Keywords: Magnetic nano-particle hyperthermia | MNP diffusivity | MNP injection rate | MNP injection strategy | Tumor physiology
Volume: 113
Pages:
ISSN/eISSN: 13504533/18734030
|
Citations: 7
Article #: 103965
Source ID: 17817
Funding: Thapar Institute of Engineering and Technology
|
| 282 |
Title: Performance Evaluation of Flutter-Based Energy Harvester Under Different Vortex Flow Regimes: An Experimental Study
Authors: Agarwal A.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-022-07181-x
Published: March 2023
|
Type: Article
Keywords: Bluff body | Energy harvesting | Flutter | MFC | Wind tunnel experiment
Volume: 48
Pages: 3491-3501
ISSN/eISSN: 2193567X/21914281
|
Citations: 6
Article #:
Source ID: 13951
Funding: Science and Engineering Research Board
|
| 283 |
Title: Experimental Investigation and Statistical Modelling of Cutting Force and Torque During Rotary Ultrasonic Drilling of Polyetherimide Composite
Authors: Shard A.
Journal: Strength of Materials
DOI: 10.1007/s11223-023-00530-7
Published: March 2023
|
Type: Article
Keywords: ANOVA | force | optimization | polyetherimide composite (PEC) | SEM | torque | ultrasonic vibration
Volume: 55
Pages: 355-370
ISSN/eISSN: 00392316/15739325
|
Citations: 3
Article #:
Source ID: 17968
Funding:
|
| 284 |
Title: Fracture analysis of CNT-reinforced composites under thermo-mechanical loading using XIGA
Authors: Yadav A.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-023-04088-y
Published: March 2023
|
Type: Article
Keywords: Adiabatic crack | CNT | MWCNT | SWCNT | Thermo-mechanical fracture | XIGA
Volume: 45
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 0
Article #: 172
Source ID: 71359
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 285 |
Title: Additive manufacturing: Materials, technologies, and applications
Authors: Agarwal R.
Journal: Additive Manufacturing Advanced Materials and Design Techniques
DOI: 10.1201/9781003258391-5
Published: 16 February 2023
|
Type: Book Chapter
Keywords:
Volume:
Pages: 77-97
ISSN/eISSN: /
|
Citations: 5
Article #:
Source ID: 21101129644
Funding:
|
| 286 |
Title: Fused filament fabrication: A comprehensive review
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705720970629
Published: February 2023
|
Type: Review
Keywords: 4D printing | commercial and non commercial feedstock filaments | feedstock filament development | Fused filament fabrication | micro-composites | nano-composites
Volume: 36
Pages: 794-814
ISSN/eISSN: 08927057/15307980
|
Citations: 64
Article #:
Source ID: 13690
Funding: Science and Engineering Research Board
|
| 287 |
Title: Recent developments of image processing to improve explosive detection methodologies and spectroscopic imaging techniques for explosive and drug detection
Authors: Sharma M.
Journal: Multimedia Tools and Applications
DOI: 10.1007/s11042-022-13578-5
Published: February 2023
|
Type: Article
Keywords: Explosive detection | LIBS | Spectroscopy | Standoff distance | Trace detection
Volume: 82
Pages: 6849-6865
ISSN/eISSN: 13807501/15737721
|
Citations: 24
Article #:
Source ID: 25627
Funding:
|
| 288 |
Title: Effect of infill pattern on the mechanical properties of polydopamine-coated polylactic acid orthopedic bone plates developed by fused filament fabrication
Authors: Sharma S.
Journal: Polymer Engineering and Science
DOI: 10.1002/pen.26210
Published: February 2023
|
Type: Article
Keywords: bone plate | coating | elongation at break | flexural strength | infill pattern | polydopamine | tensile strength
Volume: 63
Pages: 353-365
ISSN/eISSN: 00323888/15482634
|
Citations: 13
Article #:
Source ID: 13695
Funding: Department of Biotechnology, Ministry of Science and Technology, India
|
| 289 |
Title: On Mechanical, Thermal, Morphological, and 4D Capabilities of Polyvinylidene Fluoride Nanocomposites: Effect of Mechanical and Chemical-Assisted Mechanical Blending
Authors: Sharma R.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-022-07199-0
Published: February 2023
|
Type: Article
Keywords: dielectric constant | fused deposition modeling | piezoelectric coefficient | polyvinylidene fluoride (PVDF) | XRD
Volume: 32
Pages: 1938-1953
ISSN/eISSN: 10599495/15441024
|
Citations: 7
Article #:
Source ID: 21160
Funding:
|
| 290 |
Title: Controlled precipitation and recrystallization to achieve superior mechanical properties of severely deformed Inconel 718 alloy
Authors: Yadav P.C.
Journal: Materials Chemistry and Physics
DOI: 10.1016/j.matchemphys.2022.127098
Published: 1 February 2023
|
Type: Article
Keywords: Age hardening | Electron back-scattered diffraction (EBSD) | Machining | Nano-precipitates | Pinning | Post heat-treatment | Recrystallization
Volume: 295
Pages:
ISSN/eISSN: 02540584/
|
Citations: 7
Article #: 127098
Source ID: 17800
Funding:
|
| 291 |
Title: Inverse optimization based non-invasion technique for multiple tumor detection in brain tissue
Authors: Singhal M.
Journal: International Communications in Heat and Mass Transfer
DOI: 10.1016/j.icheatmasstransfer.2022.106596
Published: February 2023
|
Type: Article
Keywords: Bioheat transfer | Brain tissue | Differential evolution | Inverse analysis | Perfusion rate | Tumor detection
Volume: 141
Pages:
ISSN/eISSN: 07351933/
|
Citations: 6
Article #: 106596
Source ID: 20422
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 292 |
Title: Effect of processing parameters and heat treatment techniques on foaming properties of aluminium foam developed by friction stir processing route
Authors: Kumar M.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/14644207221117517
Published: February 2023
|
Type: Article
Keywords: compressive strength | Foam | friction stir processing | furnace | microwave | pore
Volume: 237
Pages: 387-402
ISSN/eISSN: 14644207/20413076
|
Citations: 5
Article #:
Source ID: 20971
Funding:
|
| 293 |
Title: Swarm Intelligence-based Modeling and Multi-objective Optimization of Welding Defect in Electron Beam Welding
Authors: Jaypuria S.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-022-07017-8
Published: February 2023
|
Type: Article
Keywords: ANFIS | Bonobo optimizer | Electron beam welding | Grey wolf | Multi-objective optimization | Particle swarm optimization | Spiking
Volume: 48
Pages: 1807-1827
ISSN/eISSN: 2193567X/21914281
|
Citations: 5
Article #:
Source ID: 13951
Funding: Department of Atomic Energy, Government of India
|
| 294 |
Title: Alkali field strength effects on optical, dielectric, and conducting properties of calcium borosilicate glasses
Authors: Bansal N.
Journal: Ceramics International
DOI: 10.1016/j.ceramint.2022.09.284
Published: 15 January 2023
|
Type: Article
Keywords: Dielectric properties | Field strength | Mechanical properties | Substrates
Volume: 49
Pages: 2998-3006
ISSN/eISSN: 02728842/
|
Citations: 17
Article #:
Source ID: 21522
Funding: Thapar Institute of Engineering and Technology
|
| 295 |
Title: Recent trends and future outlooks in manufacturing methods and applications of FGM: a comprehensive review
Authors: Kumar P.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2022.2075892
Published: 2023
|
Type: Review
Keywords: additive | advanced | ceramic-ceramic | FGM | functional | gradation | manufacturing | manufacturing | materials | metal-ceramic | metal-metal | metal-polymer | polymer-ceramic | polymer-polymer
Volume: 38
Pages: 1033-1067
ISSN/eISSN: 10426914/15322475
|
Citations: 73
Article #:
Source ID: 21054
Funding:
|
| 296 |
Title: Recent trends and future outlooks in manufacturing methods and applications of FGM: a comprehensive review
Authors: Kumar P.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2022.2075892
Published: 2023
|
Type: Review
Keywords: additive | advanced | ceramic-ceramic | FGM | functional | gradation | manufacturing | manufacturing | materials | metal-ceramic | metal-metal | metal-polymer | polymer-ceramic | polymer-polymer
Volume: 38
Pages: 1033-1067
ISSN/eISSN: 10426914/15322475
|
Citations: 73
Article #:
Source ID: 21054
Funding:
|
| 297 |
Title: Finite element framework for static analysis of temperature dependent IHSDT based functionally graded CNT reinforced plates
Authors: Sharma L.K.
Journal: Mechanics Based Design of Structures and Machines
DOI: 10.1080/15397734.2021.1999265
Published: 2023
|
Type: Article
Keywords: Extended rule of mixture | finite element method | functionally graded material | inverse hyperbolic shear deformation theory | temperature dependent
Volume: 51
Pages: 5318-5339
ISSN/eISSN: 15397734/15397742
|
Citations: 19
Article #:
Source ID: 21092
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 298 |
Title: Heat pipes for PEM fuel cell cooling: State of the art review
Authors: Singh R.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2023.01.135
Published: 2023
|
Type: Article
Keywords: Clean energy | Heat pipe | PEM fuel cell | Thermal management
Volume:
Pages:
ISSN/eISSN: /22147853
|
Citations: 19
Article #:
Source ID: 21100370037
Funding:
|
| 299 |
Title: Buckling and Free Vibration Analysis of Temperature-Dependent Functionally Graded CNT-Reinforced Plates
Authors: Sharma L.K.
Journal: Journal of Vibration Engineering and Technologies
DOI: 10.1007/s42417-022-00571-3
Published: January 2023
|
Type: Article
Keywords: Buckling analysis | CNT-reinforced composite | Navier solution | Vibration analysis
Volume: 11
Pages: 175-192
ISSN/eISSN: 25233920/25233939
|
Citations: 17
Article #:
Source ID: 21100364384
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 300 |
Title: The SLP estimation of the nanoparticle systems using size-dependent magnetic properties for the magnetic hyperthermia therapy
Authors: Nain S.
Journal: Journal of Magnetism and Magnetic Materials
DOI: 10.1016/j.jmmm.2022.170219
Published: 1 January 2023
|
Type: Article
Keywords: Anisotropy constant of MNP | Magnetic nanoparticles (MNPs) | Saturation magnetization of MNPs | Specific loss power (SLP) of MNPs
Volume: 565
Pages:
ISSN/eISSN: 03048853/
|
Citations: 17
Article #: 170219
Source ID: 28526
Funding: Thapar Institute of Engineering and Technology
|
| 301 |
Title: EXPERIMENTAL INVESTIGATION AND PARAMETRIC OPTIMIZATION OF NEUROSURGICAL BONE GRINDING UNDER BIO-MIMIC ENVIRONMENT
Authors: Babbar A.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X21410055
Published: 1 January 2023
|
Type: Article
Keywords: Bone grinding | forces | infrared thermography | optimization | temperature
Volume: 30
Pages:
ISSN/eISSN: 0218625X/
|
Citations: 13
Article #: 2141005
Source ID: 18374
Funding: All-India Institute of Medical Sciences
|
| 302 |
Title: Influence of ultrasonic vibrations during drilling of carbon-fiber-reinforced polyetherimide composites
Authors: Shard A.
Journal: Applied Acoustics
DOI: 10.1016/j.apacoust.2022.109163
Published: January 2023
|
Type: Article
Keywords: Carbon-fiber-reinforced polyetherimide | Cutting force | Rotary ultrasonic drilling | Temperature | Ultrasonic power
Volume: 202
Pages:
ISSN/eISSN: 0003682X/1872910X
|
Citations: 12
Article #: 109163
Source ID: 12946
Funding:
|
| 303 |
Title: Experimental assessment of nanoclay effect on hardness, tensile and flexural properties of glass fiber/epoxy laminates
Authors: Verma R.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2022.12.163
Published: January 2023
|
Type: Conference Paper
Keywords: Glass fiber reinforcement | Nano-Composites | Organically modified montmorillonite | Tensile and flexure strength
Volume: 79
Pages: 395-397
ISSN/eISSN: /22147853
|
Citations: 10
Article #:
Source ID: 21100370037
Funding:
|
| 304 |
Title: Internal magnetorheological finishing of a typical outer race of ball bearing
Authors: Paswan S.K.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2022.2032139
Published: 2023
|
Type: Article
Keywords: ball | bearing | finishing | fluid | honing | Inner | magnetorheological | outer | polishing | race | roughness | surface
Volume: 38
Pages: 1209-1225
ISSN/eISSN: 10426914/15322475
|
Citations: 8
Article #:
Source ID: 21054
Funding:
|
| 305 |
Title: Investigation of Infrared Thermography of Cortical Bone Grinding in Neurosurgery
Authors: Babbar A.
Journal: Advances in Science and Technology Research Journal
DOI: 10.12913/22998624/156367
Published: 2023
|
Type: Article
Keywords: biomimetic | bone grinding | Burr | infrared thermography | surfaces | thermal analysis
Volume: 17
Pages: 116-123
ISSN/eISSN: /22998624
|
Citations: 8
Article #:
Source ID: 21101070987
Funding:
|
| 306 |
Title: Variable Dropout One-Dimensional CNN for Vibration-Based Shaft Unbalance Detection in Industrial Machinery
Authors: Yadav A.
Journal: Journal of Vibration Engineering and Technologies
DOI: 10.1007/s42417-022-00578-w
Published: January 2023
|
Type: Article
Keywords: Deep learning | Fault diagnosis | Shaft unbalance | Vibration-based fault detection
Volume: 11
Pages: 301-318
ISSN/eISSN: 25233920/25233939
|
Citations: 7
Article #:
Source ID: 21100364384
Funding:
|
| 307 |
Title: Variable Dropout One-Dimensional CNN for Vibration-Based Shaft Unbalance Detection in Industrial Machinery
Authors: Yadav A.
Journal: Journal of Vibration Engineering and Technologies
DOI: 10.1007/s42417-022-00578-w
Published: January 2023
|
Type: Article
Keywords: Deep learning | Fault diagnosis | Shaft unbalance | Vibration-based fault detection
Volume: 11
Pages: 301-318
ISSN/eISSN: 25233920/25233939
|
Citations: 7
Article #:
Source ID: 21100364384
Funding:
|
| 308 |
Title: Feasibility study of a 3D printed BLDC outrunner rotor
Authors: Akula V.S.R.P.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2022.11.090
Published: January 2023
|
Type: Conference Paper
Keywords: 3D printed BLDC | 3D Printed motors | A2212 BLDC | BLDC Motors
Volume: 80
Pages: 163-167
ISSN/eISSN: /22147853
|
Citations: 5
Article #:
Source ID: 21100370037
Funding:
|
| 309 |
Title: On twin screw extrusion parametric optimisation using hybrid approach of ANOVA and TOPSIS for 3D printing applications
Authors: Kumar S.
Journal: Advances in Materials and Processing Technologies
DOI: 10.1080/2374068X.2022.2087844
Published: 2023
|
Type: Article
Keywords: ANOVA analysis | coercivity | correlation matrix | hybrid approach | magnetisation | Multi-objective selection | PLA composite matrix | TOPSIS analysis
Volume: 9
Pages: 152-168
ISSN/eISSN: 2374068X/23740698
|
Citations: 3
Article #:
Source ID: 21100902866
Funding: Thapar Institute of Engineering and Technology
|
| 310 |
Title: Characterization of mechanical and metallurgical properties of AA6063 foam developed by friction stir precursor deposition technique
Authors: Kumar M.
Journal: Journal of Adhesion Science and Technology
DOI: 10.1080/01694243.2022.2152405
Published: 2023
|
Type: Article
Keywords: aluminium precursor | foam | Frictions stir deposition | microstructure | plateau stress
Volume: 37
Pages: 2608-2625
ISSN/eISSN: 01694243/15685616
|
Citations: 3
Article #:
Source ID: 13664
Funding: Thapar Institute of Engineering and Technology
|
| 311 |
Title: Characterization of mechanical and metallurgical properties of AA6063 foam developed by friction stir precursor deposition technique
Authors: Kumar M.
Journal: Journal of Adhesion Science and Technology
DOI: 10.1080/01694243.2022.2152405
Published: 2023
|
Type: Article
Keywords: aluminium precursor | foam | Frictions stir deposition | microstructure | plateau stress
Volume: 37
Pages: 2608-2625
ISSN/eISSN: 01694243/15685616
|
Citations: 3
Article #:
Source ID: 13664
Funding: Thapar Institute of Engineering and Technology
|
| 312 |
Title: Magnetorheological finishing of ball-cup surface using new tool to enhance ball-transfer-unit performance
Authors: Aggarwal A.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2022.2089889
Published: 2023
|
Type: Article
Keywords: ball-cup-surface | ball-transfer-unit | blind-hole | Fine-finishing | fluid | hemispherical | magnetorheological | polishing | roughness
Volume: 38
Pages: 1226-1242
ISSN/eISSN: 10426914/15322475
|
Citations: 3
Article #:
Source ID: 21054
Funding:
|
| 313 |
Title: Modeling and analysis of heat transfer and fluid flow mechanisms in nanofluid filled enclosures irradiated from below
Authors: Singh I.
Journal: International Journal of Thermal Sciences
DOI: 10.1016/j.ijthermalsci.2022.107852
Published: January 2023
|
Type: Article
Keywords: Absorption coefficient | Bottom irradiated | Rayleigh bénard convection | Surface absorption | Volumetric absorption
Volume: 183
Pages:
ISSN/eISSN: 12900729/
|
Citations: 3
Article #: 107852
Source ID: 13761
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 314 |
Title: Analysis of a high speed low-torque variable displacement hydro-motor efficiency at different displacement conditions
Authors: Pandey A.K.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2022.11.114
Published: January 2023
|
Type: Conference Paper
Keywords: High speed low-torque motor | Hydraulic drive | Load torque | Overall efficiency | Variable displacement hydro-motor
Volume: 79
Pages: 247-249
ISSN/eISSN: /22147853
|
Citations: 2
Article #:
Source ID: 21100370037
Funding:
|
| 315 |
Title: Nano-modified epoxy coatings: An effective method for sustainable construction
Authors: Sharma N.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2023.08.069
Published: 2023
|
Type: Conference Paper
Keywords: Epoxy coating | Graphene derivatives | Nano-clay | Reinforced concrete | Sustainable construction | Ultrasonic guided waves
Volume: 93
Pages: 440-446
ISSN/eISSN: /22147853
|
Citations: 2
Article #:
Source ID: 21100370037
Funding: Thapar Institute of Engineering and Technology
|
| 316 |
Title: Three dimensional printing of deformed ankle foot and pelvis using poly lactic acid for pre surgical planning
Authors: Sharma S.
Journal: International Journal on Interactive Design and Manufacturing
DOI: 10.1007/s12008-023-01271-2
Published: 2023
|
Type: Article
Keywords: 3D printing | Ankle foot deformity | Finite element analysis | Pelvis deformity | Poly lactic acid (PLA) | Pre surgical planning
Volume:
Pages:
ISSN/eISSN: 19552513/19552505
|
Citations: 2
Article #:
Source ID: 12000154536
Funding:
|
| 317 |
Title: Design of an optimal tracking controller with unmeasured states for electro-hydraulic actuation system using 4/3 proportional DC valve
Authors: Kumawat A.K.
Journal: International Journal of Automation and Control
DOI: 10.1504/IJAAC.2023.131774
Published: 2023
|
Type: Article
Keywords: Electro-hydraulic actuation system | Kalman state estimator | Optimal tracking control | Proportional directional control valve.
Volume: 17
Pages: 418-439
ISSN/eISSN: 17407516/17407524
|
Citations: 2
Article #:
Source ID: 19700186851
Funding:
|
| 318 |
Title: Single point incremental bending: Bending load evaluations and process validation
Authors: Singh A.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/09544054221100316
Published: January 2023
|
Type: Article
Keywords: computer aided manufacturing | forces | Free-form | metal forming | sheet metal
Volume: 237
Pages: 305-316
ISSN/eISSN: 09544054/20412975
|
Citations: 2
Article #:
Source ID: 20406
Funding:
|
| 319 |
Title: A Systematic Review of Rotor Unbalance Diagnosis in Rotating Machinery Based on Machine Learning Algorithms
Authors: Rajagopalan S.
Journal: Mechanisms and Machine Science
DOI: 10.1007/978-981-99-4721-8_19
Published: 2023
|
Type: Conference Paper
Keywords: Artificial intelligence | Fault diagnosis | Machine learning | Rotor unbalance
Volume: 137
Pages: 281-300
ISSN/eISSN: 22110984/22110992
|
Citations: 1
Article #:
Source ID: 21100298603
Funding:
|
| 320 |
Title: Physical, optical, and mechanical properties of commercially available windshield glasses using various cars
Authors: Kumar S.
Journal: Journal of Physics Conference Series
DOI: 10.1088/1742-6596/2426/1/012032
Published: 2023
|
Type: Conference Paper
Keywords:
Volume: 2426
Pages:
ISSN/eISSN: 17426588/17426596
|
Citations: 1
Article #: 012032
Source ID: 130053
Funding:
|
| 321 |
Title: Residual Stress Analysis in Titanium Alloys Used for Biomedical Applications
Authors: Kumar G.
Journal: Advanced Materials and Manufacturing Techniques for Biomedical Applications
DOI: 10.1002/9781394166985.ch13
Published: 1 January 2023
|
Type: Book Chapter
Keywords: Biomedical applications | EBSD | Microstructure | Residual stresses | SPIF | Titanium grade-2 | X-ray diffraction
Volume:
Pages: 325-344
ISSN/eISSN: /
|
Citations: 1
Article #:
Source ID: 21101192995
Funding:
|
| 322 |
Title: Effect of variation of ceramic reinforcement content on metallurgical and cavitation erosion behaviour of microwave processed composite clads
Authors: Bansal S.
Journal: International Journal of Surface Science and Engineering
DOI: 10.1504/IJSURFSE.2023.130158
Published: 2023
|
Type: Article
Keywords: cavitation erosion | characterisation | metal-ceramic composite | microwave processing | surface modification
Volume: 17
Pages: 121-140
ISSN/eISSN: 1749785X/17497868
|
Citations: 1
Article #:
Source ID: 12400154712
Funding: Science and Engineering Research Board
|
| 323 |
Title: Performance improvement of solar still by using float wicks in different proportion of covered area
Authors: Kumar Singh S.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2023.2213667
Published: 2023
|
Type: Article
Keywords: Desalination | distillate | float wick | shallow solar pond | solar still
Volume: 45
Pages: 6027-6042
ISSN/eISSN: 15567036/15567230
|
Citations: 1
Article #:
Source ID: 4500151514
Funding:
|
| 324 |
Title: Modelling and experimental validation for thrust force and heat generation during bone drilling
Authors: Singh G.
Journal: International Journal on Interactive Design and Manufacturing
DOI: 10.1007/s12008-023-01398-2
Published: 2023
|
Type: Article
Keywords: Bone drilling | Bone fracture | Mathematical model | Orthopedic surgery | Thermal damage (osteonecrosis)
Volume:
Pages:
ISSN/eISSN: 19552513/19552505
|
Citations: 1
Article #:
Source ID: 12000154536
Funding:
|
| 325 |
Title: Radiation Curing of Fiber Reinforced Polymer Composite Based Mechanical Joints
Authors: Kumar M.
Journal: Materials Horizons from Nature to Nanomaterials
DOI: 10.1007/978-981-19-9048-9_4
Published: 2023
|
Type: Book Chapter
Keywords: Accelerated aging | Carbon fiber | Cationic initiator | Electron beam | Failure loads | Mechanical joints | Numerical modeling
Volume:
Pages: 107-148
ISSN/eISSN: 25245384/25245392
|
Citations: 1
Article #:
Source ID: 21101128543
Funding: Bhabha Atomic Research Centre
|
| 326 |
Title: Continuous Time LQR Based Position Control for an Electro-Hydraulic Actuation System
Authors: Kumawat A.K.
Journal: 2023 International Conference for Advancement in Technology Iconat 2023
DOI: 10.1109/ICONAT57137.2023.10080605
Published: 2023
|
Type: Conference Paper
Keywords: electro-hydraulic actuator | linear quadratic regulator | position control | proportional directional control valve
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 1
Article #:
Source ID: 21101147570
Funding:
|
| 327 |
Title: Effect of different combat boots on peak ground reaction forces during walking
Authors: Sandhu K.
Journal: International Journal of Human Factors and Ergonomics
DOI: 10.1504/IJHFE.2023.133570
Published: 2023
|
Type: Article
Keywords: foot prevention | GRFs | ground reaction forces | marching | military boot | over-use injuries
Volume: 10
Pages: 283-294
ISSN/eISSN: 20457804/20457812
|
Citations: 1
Article #:
Source ID: 21100468669
Funding:
|
| 328 |
Title: Performance of a fuel cell-based proton battery with varied designs of micro-flow channel for enhanced hydrogen storage
Authors: Singh G.
Journal: Environmental Progress and Sustainable Energy
DOI: 10.1002/ep.13959
Published: January/February 2023
|
Type: Article
Keywords: carbon electrode | energy storage | flow channels | fuel cell | hydrogen storage | proton battery
Volume: 42
Pages:
ISSN/eISSN: 19447442/19447450
|
Citations: 1
Article #: e13959
Source ID: 17700156701
Funding:
|
| 329 |
Title: Design of Steel Intensive Quarantine Centre
Authors: Chawla H.
Journal: Lecture Notes in Civil Engineering
DOI: 10.1007/978-981-19-4040-8_27
Published: 2023
|
Type: Conference Paper
Keywords: COVID-19 Quarantine Centre | Portal frame | Rapid construction | Steel structure | Truss
Volume: 277
Pages: 321-332
ISSN/eISSN: 23662557/23662565
|
Citations: 0
Article #:
Source ID: 21100889404
Funding:
|
| 330 |
Title: Effect of Bluff Body on the Performance of Flutter Based Energy Harvester
Authors: Agarwal A.
Journal: Mechanisms and Machine Science
DOI: 10.1007/978-981-99-4721-8_18
Published: 2023
|
Type: Conference Paper
Keywords: Bluff Body | Flow-induced vibration | Flutter | Piezoelectric energy harvesting | Wind tunnel experiment
Volume: 137
Pages: 271-279
ISSN/eISSN: 22110984/22110992
|
Citations: 0
Article #:
Source ID: 21100298603
Funding:
|
| 331 |
Title: Investigating the Work Generation Potential of SMA Wire Actuators
Authors: Bhatt N.
Journal: Handbook of Smart Manufacturing Forecasting the Future of Industry 4 0
DOI: 10.1201/9781003333760-11
Published: 1 January 2023
|
Type: Book Chapter
Keywords:
Volume:
Pages: 217-234
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101159217
Funding:
|
| 332 |
Title: Electrochemical Hydrogen Storage Within a Modified Reversible PEM Fuel Cell and Its Performance Analysis with Interdigitated and Spiral Micro Flow Channels
Authors: Singh G.
Journal: Green Energy and Technology
DOI: 10.1007/978-981-99-2279-6_14
Published: 2023
|
Type: Conference Paper
Keywords: Carbon electrode | Fuel cell | Hydrogen storage | Micro flow channels | Proton exchange membrane fuel cell
Volume:
Pages: 155-163
ISSN/eISSN: 18653529/18653537
|
Citations: 0
Article #:
Source ID: 21100248905
Funding:
|
| 333 |
Title: Nanoparticle-Laden Flow for Solar Absorption
Authors: Khullar V.
Journal: Handbook of Multiphase Flow Science and Technology
DOI: 10.1007/978-981-287-092-6_20
Published: 1 January 2023
|
Type: Book Chapter
Keywords: Absorption | Heat transfer | Nanofluid flow | Nanoparticle | Overall efficiency | Scattering | Solar energy | Volumetric absorption
Volume:
Pages: 719-748
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101230007
Funding:
|
| 334 |
Title: Vibration Suppression of Hand Tremor Using Active Vibration Strategy: A Numerical Study
Authors: Sharma A.
Journal: Lecture Notes in Electrical Engineering
DOI: 10.1007/978-981-99-0236-1_36
Published: 2023
|
Type: Conference Paper
Keywords: Active vibration control | Finite element modelling | Hand tremor suppression
Volume: 1009 LNEE
Pages: 457-466
ISSN/eISSN: 18761100/18761119
|
Citations: 0
Article #:
Source ID: 19700186822
Funding:
|
| 335 |
Title: Heuristic Controller Design for Inverted Pendulum Using Bond Graph Approach
Authors: Kumar A.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-19-2188-9_50
Published: 2023
|
Type: Conference Paper
Keywords: Bond graph | Heuristic controller | Inverted pendulum | PI controller | Stabilization control
Volume:
Pages: 547-557
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 336 |
Title: Re-strengthening of Real Sized RC Beams Subjected to Corrosion Using Glass Fiber Reinforced Polymer Sheets
Authors: Garhwal S.
Journal: Lecture Notes in Networks and Systems
DOI: 10.1007/978-3-031-50158-6_15
Published: 2023
|
Type: Conference Paper
Keywords: Corrosion | Deflection | Ductility | GFRP repairing | Ultimate load
Volume: 855 LNNS
Pages: 145-152
ISSN/eISSN: 23673370/23673389
|
Citations: 0
Article #:
Source ID: 21100901469
Funding:
|
| 337 |
Title: Modeling of Volumetric Shrinkage of Nylon Parts Fabricated by 3D Printing Process
Authors: Puri S.S.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-99-1288-9_5
Published: 2023
|
Type: Conference Paper
Keywords: Extruder temperature | Layer height | Nylon | Volumetric shrinkage
Volume:
Pages: 47-56
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 338 |
Title: Experimental investigations for the characterisation of an SMA-bias spring actuator in a flexible tube manipulator
Authors: Bhatt N.
Journal: International Journal of Materials and Product Technology
DOI: 10.1504/IJMPT.2023.130199
Published: 2023
|
Type: Article
Keywords: characterisation | constitutive model | experimental setup | flexible tube manipulator | PID controller | SMA actuator
Volume: 66
Pages: 289-311
ISSN/eISSN: 02681900/
|
Citations: 0
Article #:
Source ID: 21108
Funding:
|
| 339 |
Title: Selective laser melting of CoCr alloys in biomedical application: A review
Authors: Saini J.S.
Journal: Radiation Technologies and Applications in Materials Science
DOI: 10.1201/9781003321910-11
Published: 30 December 2022
|
Type: Book Chapter
Keywords:
Volume:
Pages: 287-309
ISSN/eISSN: /
|
Citations: 2
Article #:
Source ID: 21101183874
Funding:
|
| 340 |
Title: Prediction of surface roughness and cutting force induced during rotary ultrasonic bone drilling via statistical and machine learning algorithms
Authors: Agarwal R.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062221110407
Published: December 2022
|
Type: Article
Keywords: Bone drilling | cutting force | machine learning | surface roughness | ultrasonic vibrations
Volume: 236
Pages: 11123-11135
ISSN/eISSN: 09544062/20412983
|
Citations: 16
Article #:
Source ID: 20407
Funding:
|
| 341 |
Title: Prediction of temperature elevation in rotary ultrasonic bone drilling using machine learning models: An in-vitro experimental study
Authors: Agarwal R.
Journal: Medical Engineering and Physics
DOI: 10.1016/j.medengphy.2022.103869
Published: December 2022
|
Type: Article
Keywords: Artificial intelligence | Bone drilling | Machine learning | Rotary ultrasonic bone drilling | Temperature elevation
Volume: 110
Pages:
ISSN/eISSN: 13504533/18734030
|
Citations: 15
Article #: 103869
Source ID: 17817
Funding:
|
| 342 |
Title: Multi-stage Primary and Secondary Recycled PLA Composite Matrix for 3D Printing Applications
Authors: Kumar S.
Journal: Proceedings of the National Academy of Sciences India Section A Physical Sciences
DOI: 10.1007/s40010-022-00783-y
Published: December 2022
|
Type: Article
Keywords: Break strength | Mechanical recycling | Modulus of toughness | Peak strength | Polymeric matrix | Recycled pellets
Volume: 92
Pages: 677-698
ISSN/eISSN: 03698203/22501762
|
Citations: 9
Article #:
Source ID: 5200152621
Funding: Thapar Institute of Engineering and Technology
|
| 343 |
Title: GMAW-Based Metal Deposition Using Semi-automatic Movement Setup
Authors: Kumar V.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-021-06486-7
Published: December 2022
|
Type: Article
Keywords: Automatic GMAW | Different profiles | Experiment | Micro-hardness | SEM | Uniform geometry | Vertical layer deposition
Volume: 47
Pages: 15161-15174
ISSN/eISSN: 2193567X/21914281
|
Citations: 1
Article #:
Source ID: 13951
Funding: Indian Institute of Technology, Patna
|
| 344 |
Title: Response surface methodology based parametric study for AISI H13 die steel using customized designed 3D printed Ti64 multi-nozzle polishing tool
Authors: Choudhary S.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062221115291
Published: December 2022
|
Type: Article
Keywords: 3D printed Ti64 tool | AISI H13 | ANOVA | CCD | Fluid jet polishing | SiC abrasive slurry
Volume: 236
Pages: 11479-11492
ISSN/eISSN: 09544062/20412983
|
Citations: 1
Article #:
Source ID: 20407
Funding:
|
| 345 |
Title: On effect of chemical-assisted mechanical blending of barium titanate and graphene in PVDF for 3D printing applications
Authors: Sharma R.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705720945377
Published: November 2022
|
Type: Article
Keywords: 4D printing | barium titanate | differential scanning calorimetry | fused deposition modeling | graphene | Polyvinylidene difluoride | twin-screw extruder
Volume: 35
Pages: 2062-2088
ISSN/eISSN: 08927057/15307980
|
Citations: 21
Article #:
Source ID: 13690
Funding: All India Council for Technical Education
|
| 346 |
Title: Parameter estimation of three diode solar PV cell using chaotic dragonfly algorithm
Authors: Singla M.K.
Journal: Soft Computing
DOI: 10.1007/s00500-022-07425-w
Published: November 2022
|
Type: Article
Keywords: Ambient temperature variation | CDA | Chaotic maps | Error analysis | Photovoltaic cells | Three diode model
Volume: 26
Pages: 11567-11598
ISSN/eISSN: 14327643/14337479
|
Citations: 19
Article #:
Source ID: 28554
Funding:
|
| 347 |
Title: Polydopamine coating on additive manufacturing-based poly lactic acid structures with controllable parameters for enhanced mechanical properties: An experimental investigation
Authors: Sharma S.
Journal: Polymer Engineering and Science
DOI: 10.1002/pen.26124
Published: November 2022
|
Type: Article
Keywords: additive manufacturing | mechanical properties | poly lactic acid | polydopamine | self-polymerization | surface morphology
Volume: 62
Pages: 3523-3542
ISSN/eISSN: 00323888/15482634
|
Citations: 16
Article #:
Source ID: 13695
Funding: Department of Biotechnology, Ministry of Science and Technology, India
|
| 348 |
Title: Performance Comparison of single-slope solar still loaded with various nanofluids
Authors: Dhindsa G.S.
Journal: Energy Science and Engineering
DOI: 10.1002/ese3.993
Published: November 2022
|
Type: Article
Keywords: nanofluid | solar desalination | solar still | thermal model | thermo-physical properties
Volume: 10
Pages: 4318-4331
ISSN/eISSN: /20500505
|
Citations: 7
Article #:
Source ID: 21100817528
Funding:
|
| 349 |
Title: Thermally induced fracture analysis of CNT reinforced FG structures with multiple discontinuities using XIGA
Authors: Yadav A.
Journal: Engineering Fracture Mechanics
DOI: 10.1016/j.engfracmech.2022.108822
Published: November 2022
|
Type: Article
Keywords: Crack | Discontinuity | FGM | Holes | Inclusions | MWCNT | SWCNT | Thermo-mechanical Load | XIGA
Volume: 275
Pages:
ISSN/eISSN: 00137944/
|
Citations: 6
Article #: 108822
Source ID: 20594
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 350 |
Title: Investigation of Surface Roughness in Novel Magnetorheological Finishing of the Internal Hemispherical-Shaped Acetabular Cup Workpieces
Authors: Arora K.
Journal: Journal of Manufacturing Science and Engineering
DOI: 10.1115/1.4054682
Published: November 2022
|
Type: Article
Keywords: dimensional accuracy | grinding and abrasive processes | hemispherical cup surface | magnetic field | magnetorheological finishing | mathematical model | micro- and nano-machining and processing | nontraditional manufacturing processes | surface morphology | surface roughness | wear resistance
Volume: 144
Pages:
ISSN/eISSN: 10871357/15288935
|
Citations: 4
Article #: 111002
Source ID: 20966
Funding:
|
| 351 |
Title: Moment-Curvature behavior of steel and GFRP reinforced beam using AE and DIC Techniques
Authors: Sharma G.
Journal: Structural Engineering and Mechanics
DOI: 10.12989/sem.2022.84.2.253
Published: 25 October 2022
|
Type: Article
Keywords: acoustic emission | digital image | hits | moment-curvature | surface strains
Volume: 84
Pages: 253-268
ISSN/eISSN: 12254568/15986217
|
Citations: 2
Article #:
Source ID: 22062
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 352 |
Title: Electrochemical hydrogen storage: Achievements, emerging trends, and perspectives
Authors: Yadav S.
Journal: International Journal of Energy Research
DOI: 10.1002/er.8407
Published: 10 October 2022
|
Type: Review
Keywords: alloy | carbonaceous material | composites | electrochemical hydrogen storage | hydrogen | hydrogen clathrates | Pervoskite oxides | renewable energy
Volume: 46
Pages: 16316-16335
ISSN/eISSN: 0363907X/1099114X
|
Citations: 40
Article #:
Source ID: 26676
Funding:
|
| 353 |
Title: Current trends, applications, and challenges of coatings on additive manufacturing based biopolymers: A state of art review
Authors: Sharma S.
Journal: Polymer Composites
DOI: 10.1002/pc.26809
Published: October 2022
|
Type: Review
Keywords: additive manufacturing | bioactivity | bioadditive | coatings | osseointegration | polymers
Volume: 43
Pages: 6749-6781
ISSN/eISSN: 02728397/15480569
|
Citations: 45
Article #:
Source ID: 14433
Funding:
|
| 354 |
Title: Post-yielding fracture mechanics of 3D printed polymer-based orthopedic cortical screws
Authors: Agarwal R.
Journal: Polymer Composites
DOI: 10.1002/pc.26620
Published: October 2022
|
Type: Article
Keywords: compressive strength | cortical screw | fracture mechanism | fused deposition modeling | tensile strength
Volume: 43
Pages: 6829-6837
ISSN/eISSN: 02728397/15480569
|
Citations: 33
Article #:
Source ID: 14433
Funding:
|
| 355 |
Title: Processing and characterization of SS316 based metal matrix composite casting through microwave hybrid heating
Authors: Pal J.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062221104443
Published: October 2022
|
Type: Article
Keywords: characterization | iron-based alloy SS316 | metal matrix composites | microwave hybrid heating (MHH) | susceptor
Volume: 236
Pages: 10508-10527
ISSN/eISSN: 09544062/20412983
|
Citations: 14
Article #:
Source ID: 20407
Funding:
|
| 356 |
Title: Effect of High Operating Temperatures on the Wear Characteristics of Boron Carbide and Ilmenite Reinforced LM13 Alloy-Based Composites
Authors: Gupta R.
Journal: Journal of Tribology
DOI: 10.1115/1.4054318
Published: October 2022
|
Type: Article
Keywords: abrasion | aluminum matrix composites | ceramic particles | dry friction | hardness | high-temperature properties | sliding | wear property
Volume: 144
Pages:
ISSN/eISSN: 07424787/15288897
|
Citations: 9
Article #: 101703
Source ID: 17014
Funding:
|
| 357 |
Title: Fabrication and mechanical characterization of hybrid composite reinforced with nanoparticles of alumina and zirconia
Authors: Vij V.
Journal: Polymer Composites
DOI: 10.1002/pc.26797
Published: October 2022
|
Type: Article
Keywords: aluminum matrix | mechanical strength | metal matrix composite | nanocomposites | reinforcements
Volume: 43
Pages: 7315-7325
ISSN/eISSN: 02728397/15480569
|
Citations: 4
Article #:
Source ID: 14433
Funding:
|
| 358 |
Title: Effect of Flow-Field Variation on Hydrogen Adsorption in a Carbon Electrode Integrated into a Modified Reversible Polymer Electrolyte Membrane Fuel Cell
Authors: Singh G.
Journal: Journal of Energy Engineering
DOI: 10.1061/(ASCE)EY.1943-7897.0000851
Published: 1 October 2022
|
Type: Article
Keywords: Carbon electrode | Flow-field | Fuel cell | Hydrogen energy | Hydrogen storage
Volume: 148
Pages:
ISSN/eISSN: 07339402/19437897
|
Citations: 3
Article #: 04022029
Source ID: 16278
Funding:
|
| 359 |
Title: Microstructural evolution during short heat treatment of constrained groove pressed Cu-5%Zn alloy
Authors: Yadav P.C.
Journal: Journal of Microscopy
DOI: 10.1111/jmi.13136
Published: October 2022
|
Type: Article
Keywords: constrained groove pressing (CGP) | dislocation cell structure | electron backscattered diffraction (EBSD) | transmission Kikuchi diffraction (TKD)
Volume: 288
Pages: 3-9
ISSN/eISSN: 00222720/13652818
|
Citations: 2
Article #:
Source ID: 20919
Funding: Indian Institute of Technology Kanpur
|
| 360 |
Title: Influence of process parameters on mechanical strength, build time, and material consumption of 3D printed polylactic acid parts
Authors: Singh J.
Journal: Polymer Composites
DOI: 10.1002/pc.26849
Published: September 2022
|
Type: Article
Keywords: additive manufacturing | build orientation | FDM | infill density | layer height | nozzle diameter | PLA | print speed | raster pattern
Volume: 43
Pages: 5908-5928
ISSN/eISSN: 02728397/15480569
|
Citations: 40
Article #:
Source ID: 14433
Funding:
|
| 361 |
Title: Additive manufacturing of smart materials exhibiting 4-D properties: A state of art review
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705719895052
Published: September 2022
|
Type: Review
Keywords: 4-D properties | actuating mechanism | additive manufacturing | Metamaterial | shape memory effect
Volume: 35
Pages: 1358-1381
ISSN/eISSN: 08927057/15307980
|
Citations: 33
Article #:
Source ID: 13690
Funding:
|
| 362 |
Title: A real-time obstacle avoidance and path tracking strategy for a mobile robot using machine-learning and vision-based approach
Authors: Singh R.
Journal: Simulation
DOI: 10.1177/00375497221091592
Published: September 2022
|
Type: Article
Keywords: bond graph modeling | experimental validation | fuzzy logic | image processing | Machine-learning | mobile robot | obstacle avoidance
Volume: 98
Pages: 789-805
ISSN/eISSN: 00375497/17413133
|
Citations: 14
Article #:
Source ID: 14452
Funding: Thapar Institute of Engineering and Technology
|
| 363 |
Title: Adaptive nonlinear control scheme for containment of COVID-19 spread
Authors: Prakash Tripathi J.
Journal: Simulation
DOI: 10.1177/00375497221078947
Published: September 2022
|
Type: Article
Keywords: Lyapunov stability | mathematical modeling and simulation | nonlinear adaptive control | Novel coronavirus | theoretical epidemiology
Volume: 98
Pages: 729-736
ISSN/eISSN: 00375497/17413133
|
Citations: 4
Article #:
Source ID: 14452
Funding:
|
| 364 |
Title: Fracture analysis of functionally graded material reinforced with MWCNT
Authors: Yadav A.
Journal: Journal of Micromechanics and Molecular Physics
DOI: 10.1142/S2424913022410041
Published: 1 September 2022
|
Type: Article
Keywords: crack growth | FGM | MWCNT | thermo-mechanical load | XIGA
Volume: 7
Pages: 185-195
ISSN/eISSN: 24249130/24249149
|
Citations: 1
Article #:
Source ID: 21101039445
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 365 |
Title: FINE SURFACE FINISHING OF CIRCULAR TAPERED MOULD CAVITY FOR LIGHT COVERS USING MAGNETORHEOLOGICAL GRINDING PROCESS
Authors: Aggarwal A.
Journal: Surface Review and Letters
DOI: 10.1142/S0218625X2250113X
Published: 1 September 2022
|
Type: Article
Keywords: light covers | Magnetorheological finishing | surface characteristic | surface roughness | tapered circular mould cavity surfaces
Volume: 29
Pages:
ISSN/eISSN: 0218625X/
|
Citations: 0
Article #: 2250113
Source ID: 18374
Funding:
|
| 366 |
Title: A novel hybrid particle swarm optimization rat search algorithm for parameter estimation of solar PV and fuel cell model
Authors: Singla M.K.
Journal: COMPEL the International Journal for Computation and Mathematics in Electrical and Electronic Engineering
DOI: 10.1108/COMPEL-07-2021-0257
Published: 26 August 2022
|
Type: Article
Keywords: Design optimization methodology | Equivalent circuit model | Error analysis | Hybrid particle swarm optimization rat search algorithm | Nonparametric tests | Numerical analysis | Particle swarm optimization | Polymer electrolyte membrane fuel cell | Rat search algorithm | Solar photovoltaic cell
Volume: 41
Pages: 1505-1527
ISSN/eISSN: 03321649/
|
Citations: 19
Article #:
Source ID: 28454
Funding: Thapar Institute of Engineering and Technology
|
| 367 |
Title: Predicting the compressive strength of additively manufactured PLA-based orthopedic bone screws: A machine learning framework
Authors: Agarwal R.
Journal: Polymer Composites
DOI: 10.1002/pc.26881
Published: August 2022
|
Type: Article
Keywords: additive manufacturing | bone screw | compressive strength | machine learning
Volume: 43
Pages: 5663-5674
ISSN/eISSN: 02728397/15480569
|
Citations: 41
Article #:
Source ID: 14433
Funding:
|
| 368 |
Title: Development of artificial intelligence-based neural network prediction model for responses of additive manufactured polylactic acid parts
Authors: Singh J.
Journal: Polymer Composites
DOI: 10.1002/pc.26876
Published: August 2022
|
Type: Article
Keywords: additive manufacturing | artificial neural network | polylactic acid | surface roughness | tensile strength
Volume: 43
Pages: 5623-5639
ISSN/eISSN: 02728397/15480569
|
Citations: 27
Article #:
Source ID: 14433
Funding:
|
| 369 |
Title: An intelligent approach to predict thermal injuries during orthopaedic bone drilling using machine learning
Authors: Agarwal R.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-022-03630-8
Published: August 2022
|
Type: Article
Keywords: Bone drilling | Lasso regression | Multi-linear regression | Multilayer perceptron | Ridge regression | Temperature prediction
Volume: 44
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 25
Article #: 320
Source ID: 71359
Funding:
|
| 370 |
Title: Nanofluid filled enclosures: potential photo-thermal energy conversion and sensible heat storage devices
Authors: Singh I.
Journal: Thermal Science and Engineering Progress
DOI: 10.1016/j.tsep.2022.101376
Published: 1 August 2022
|
Type: Article
Keywords: Photo-thermal | Sensible heat storage | Surface absorption | Thermal discharging | Volumetric absorption
Volume: 33
Pages:
ISSN/eISSN: /24519049
|
Citations: 9
Article #: 101376
Source ID: 21100842663
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 371 |
Title: Effect of multi-layer graphene on microstructure and mechanical properties of titanium-based composites
Authors: Sharma D.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062221086187
Published: August 2022
|
Type: Article
Keywords: graphene | metal matrix composites | nanohardness | porosity | spark plasma sintering
Volume: 236
Pages: 8542-8551
ISSN/eISSN: 09544062/20412983
|
Citations: 4
Article #:
Source ID: 20407
Funding: Thapar Institute of Engineering and Technology
|
| 372 |
Title: Micro-scratching behavior of heat-treated cutting chips of Inconel 718
Authors: Yadav P.C.
Journal: Materials Today Communications
DOI: 10.1016/j.mtcomm.2022.104007
Published: August 2022
|
Type: Article
Keywords: Heat-treatment | Inconel 718 | Mechanical property | Scratch test | Severe plastic deformation | Wear behavior
Volume: 32
Pages:
ISSN/eISSN: /23524928
|
Citations: 0
Article #: 104007
Source ID: 21100369777
Funding: Royal Society
|
| 373 |
Title: Influence of cutting force on temperature, microcracks and chip morphology during rotary ultrasonic bone drilling: An in-vitro study
Authors: Agarwal R.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-022-03608-6
Published: July 2022
|
Type: Article
Keywords: Bone chips | Bone drilling | Cutting force | Microcracks | Temperature
Volume: 44
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 18
Article #: 301
Source ID: 71359
Funding:
|
| 374 |
Title: Mathematical Approach on Chipping Volume Estimation Generated During Rotary Ultrasonic Drilling for Float Glass
Authors: Sharma A.
Journal: Proceedings of the National Academy of Sciences India Section A Physical Sciences
DOI: 10.1007/s40010-021-00732-1
Published: June 2022
|
Type: Article
Keywords: Buckingham pi theorem | Characterization | Chipping volume | Float glass | Rotary ultrasonic drilling
Volume: 92
Pages: 285-291
ISSN/eISSN: 03698203/22501762
|
Citations: 21
Article #:
Source ID: 5200152621
Funding:
|
| 375 |
Title: Three-dimensional printing of dual thermoplastic materials with different layer combinations: Tensile, flexural, and fractured surface investigations
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705720925123
Published: June 2022
|
Type: Article
Keywords: 3-D printing | alternate layer design | Dual material matrix | fractured surface analysis | tensile and flexural properties
Volume: 35
Pages: 826-845
ISSN/eISSN: 08927057/15307980
|
Citations: 12
Article #:
Source ID: 13690
Funding: Thapar Institute of Engineering and Technology
|
| 376 |
Title: Analyzing the effect of parametric variations on the performance of antagonistic SMA spring actuator
Authors: Bhatt N.
Journal: Materials Today Communications
DOI: 10.1016/j.mtcomm.2022.103728
Published: June 2022
|
Type: Article
Keywords: Antagonistic spring | Arbitrary loading | Geometrical parameters | Material parameters | Shape memory alloy spring | Thermo-mechanical loading
Volume: 31
Pages:
ISSN/eISSN: /23524928
|
Citations: 7
Article #: 103728
Source ID: 21100369777
Funding:
|
| 377 |
Title: Investigation of magnetorheological fluid-based finishing process for improving the functional performance of hydraulic cylinder
Authors: Paswan S.K.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089211050156
Published: June 2022
|
Type: Article
Keywords: cylindrical barrel | fine finishing | hydraulic cylinder | magnetorheological honing | Magnetorheological polishing fluid | surface characteristics | surface roughness
Volume: 236
Pages: 824-837
ISSN/eISSN: 09544089/20413009
|
Citations: 7
Article #:
Source ID: 20408
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 378 |
Title: Singularity analysis of a 7-DOF spatial hybrid manipulator for medical surgery
Authors: Gupta S.
Journal: International Journal of Nonlinear Sciences and Numerical Simulation
DOI: 10.1515/ijnsns-2019-0130
Published: 1 June 2022
|
Type: Article
Keywords: hybrid manipulator | Jacobian matrix | medical surgery | safe working zones | singularity analysis
Volume: 23
Pages: 419-431
ISSN/eISSN: 15651339/
|
Citations: 1
Article #:
Source ID: 23247
Funding:
|
| 379 |
Title: Silt erosion performance of high velocity oxy fuel- (HVOF) sprayed Al2O3–Cr2O3 composite coatings on turbine steel
Authors: Kumar R.
Journal: Industrial Lubrication and Tribology
DOI: 10.1108/ILT-08-2021-0346
Published: 30 May 2022
|
Type: Article
Keywords: CeO2 | Coatings | Erosion wear | HVOF
Volume: 74
Pages: 572-579
ISSN/eISSN: 00368792/
|
Citations: 6
Article #:
Source ID: 20389
Funding:
|
| 380 |
Title: Recycling of Ti6Al4V machining swarf into additive manufacturing feedstock powder to realise sustainable recycling goals
Authors: Dhiman S.
Journal: Journal of Cleaner Production
DOI: 10.1016/j.jclepro.2022.131342
Published: 10 May 2022
|
Type: Article
Keywords: Additive manufacturing | Direct metal laser sintering | Life cycle assessment | Machining waste | Recycling | Ti6Al4V
Volume: 348
Pages:
ISSN/eISSN: 09596526/
|
Citations: 32
Article #: 131342
Source ID: 19167
Funding:
|
| 381 |
Title: Aerodynamic modeling of vehicle for better fuel efficiency
Authors: Kansal M.
Journal: Aip Conference Proceedings
DOI: 10.1063/5.0080536
Published: 9 May 2022
|
Type: Conference Paper
Keywords:
Volume: 2357
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 0
Article #: 040014
Source ID: 26916
Funding:
|
| 382 |
Title: On mechanical and surface properties of electro-active polymer matrix-based 3D printed functionally graded prototypes
Authors: Sharma R.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705720907677
Published: May 2022
|
Type: Article
Keywords: barium titanate | Electro-active polymer | fused deposition modeling | polyvinyl diene fluoride | tensile properties
Volume: 35
Pages: 615-630
ISSN/eISSN: 08927057/15307980
|
Citations: 25
Article #:
Source ID: 13690
Funding:
|
| 383 |
Title: On investigations of thermal conductivity, circumferential compressive strength, and surface characterization of 3D-printed hybrid blended magnetostrictive PLA composite
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705720907651
Published: May 2022
|
Type: Article
Keywords: break strength | circumferential compressive strength | Hybrid blend | modulus of toughness | peak strength
Volume: 35
Pages: 631-650
ISSN/eISSN: 08927057/15307980
|
Citations: 23
Article #:
Source ID: 13690
Funding: Thapar Institute of Engineering and Technology
|
| 384 |
Title: Comparison of mechanical and morphological properties of 3-D printed functional prototypes: Multi and hybrid blended thermoplastic matrix
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705720925136
Published: May 2022
|
Type: Article
Keywords: 3-D surface rendering | break strength | functional prototypes | hybrid filament | Multimaterial printing | SEM characterization
Volume: 35
Pages: 692-707
ISSN/eISSN: 08927057/15307980
|
Citations: 12
Article #:
Source ID: 13690
Funding: Thapar Institute of Engineering and Technology
|
| 385 |
Title: Heat treatment T4 and T6 effects on the tribological properties of sillimanite mineral-reinforced LM30 aluminium alloy composites at elevated temperatures
Authors: Sharma S.
Journal: Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology
DOI: 10.1177/13506501211036543
Published: May 2022
|
Type: Article
Keywords: aluminium matrix composites | Heat treatment | sillimanite | wear and friction | wear track analysis
Volume: 236
Pages: 946-959
ISSN/eISSN: 13506501/2041305X
|
Citations: 5
Article #:
Source ID: 20410
Funding: Council of Scientific and Industrial Research, India
|
| 386 |
Title: Hybrid mechanical and chemical recycling of plastics
Authors: Sharma R.
Journal: Additive Manufacturing for Plastic Recycling Efforts in Boosting A Circular Economy
DOI: 10.1201/9781003184164-3
Published: 27 April 2022
|
Type: Book Chapter
Keywords:
Volume:
Pages: 37-50
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101104441
Funding:
|
| 387 |
Title: Oxidation in Iron–Copper and Iron–Phosphorous Binary Alloys: Relating Alloying and Metal-Oxide Crystallography with Oxidation Resistance
Authors: Mehtani H.K.
Journal: Oxidation of Metals
DOI: 10.1007/s11085-022-10099-2
Published: April 2022
|
Type: Article
Keywords: Copper | Iron | Microstructure | Oxidation | Phosphorous | Texture
Volume: 97
Pages: 417-440
ISSN/eISSN: 0030770X/15734889
|
Citations: 5
Article #:
Source ID: 27009
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 388 |
Title: Novel investigation on tribological behavior of microwave synthesized functionally graded claddings
Authors: Kaushal S.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062211045892
Published: April 2022
|
Type: Article
Keywords: dry sliding wear | fractography | functionally graded materials | Microwave cladding
Volume: 236
Pages: 4336-4345
ISSN/eISSN: 09544062/20412983
|
Citations: 2
Article #:
Source ID: 20407
Funding:
|
| 389 |
Title: Hot corrosion performance of bare and coated T91 steel under actual and simulated bio-fuel fired boiler environment
Authors: Kumar M.
Journal: Indian Journal of Engineering and Materials Sciences
DOI:
Published: April 2022
|
Type: Article
Keywords: Boiler steel | Coating | Detonation gun | Hot corrosion
Volume: 29
Pages: 218-227
ISSN/eISSN: 09714588/09751017
|
Citations: 0
Article #:
Source ID: 29812
Funding:
|
| 390 |
Title: Factors influencing the performance of PEM fuel cells: A review on performance parameters, water management, and cooling techniques
Authors: Singh R.
Journal: International Journal of Energy Research
DOI: 10.1002/er.7437
Published: 25 March 2022
|
Type: Review
Keywords: clean environment | heat pipes | hydrogen energy | PEM fuel cell | water management | zero pollution
Volume: 46
Pages: 3810-3842
ISSN/eISSN: 0363907X/1099114X
|
Citations: 45
Article #:
Source ID: 26676
Funding:
|
| 391 |
Title: Evaluation of corrosion inhibition capability of graphene modified epoxy coatings on reinforcing bars in concrete
Authors: Sharma N.
Journal: Construction and Building Materials
DOI: 10.1016/j.conbuildmat.2022.126495
Published: 7 March 2022
|
Type: Article
Keywords: Carbon nano-tubes (CNT) | Corrosion | Corrosion current | Graphene oxide | Reduced graphene oxide | Reinforced concrete | Silane agents | Ultrasonic guided waves
Volume: 322
Pages:
ISSN/eISSN: 09500618/
|
Citations: 64
Article #: 126495
Source ID: 24443
Funding: Thapar Institute of Engineering and Technology
|
| 392 |
Title: The origin of graphite morphology in cast iron
Authors: Tewary U.
Journal: Acta Materialia
DOI: 10.1016/j.actamat.2022.117660
Published: March 2022
|
Type: Article
Keywords: Anisotropic growth | Cast iron | Crystallographic orientation | Graphite morphology | Interfacial energy
Volume: 226
Pages:
ISSN/eISSN: 13596454/
|
Citations: 30
Article #: 117660
Source ID: 28583
Funding:
|
| 393 |
Title: The application of Three-dimensional printing on foot fractures and deformities: A mini-review
Authors: Agarwal R.
Journal: Annals of 3D Printed Medicine
DOI: 10.1016/j.stlm.2022.100046
Published: March 2022
|
Type: Review
Keywords: 3D printing | Computed tomography | Customized prostheses | Foot deformities | Foot fractures
Volume: 5
Pages:
ISSN/eISSN: /26669641
|
Citations: 25
Article #: 100046
Source ID: 21101140109
Funding:
|
| 394 |
Title: Novel epoxy-based glass fiber reinforced composites containing compatibilized para-aramid fibers and silanized nanoclay for improved impact strength
Authors: Shelly D.
Journal: Polymer Composites
DOI: 10.1002/pc.26453
Published: March 2022
|
Type: Article
Keywords: compatibilization | composites | fibers | impact resistance | mechanical properties
Volume: 43
Pages: 1357-1370
ISSN/eISSN: 02728397/15480569
|
Citations: 16
Article #:
Source ID: 14433
Funding:
|
| 395 |
Title: Metal inserts for performance improvement in glass fiber-reinforced polymer nanocomposite joints under accelerated aging conditions
Authors: Singh K.
Journal: Polymer Composites
DOI: 10.1002/pc.26465
Published: March 2022
|
Type: Article
Keywords: accelerated aging | glass fiber-reinforced composite | mechanical joints | mechanical strengths | metal inserts
Volume: 43
Pages: 1448-1461
ISSN/eISSN: 02728397/15480569
|
Citations: 8
Article #:
Source ID: 14433
Funding:
|
| 396 |
Title: Impact of compression ratio on combustion behavior of hydrogen enriched biogas-diesel operated CI engine
Authors: Rosha P.
Journal: Fuel
DOI: 10.1016/j.fuel.2021.122321
Published: 15 February 2022
|
Type: Article
Keywords: Alternative gaseous fuel | Co-combustion | Compression ratio | Dual fuel engine | Energy-efficient gaseous fuel | Engine characteristics
Volume: 310
Pages:
ISSN/eISSN: 00162361/
|
Citations: 30
Article #: 122321
Source ID: 16313
Funding:
|
| 397 |
Title: Processing strategy for high strength Ni-based hybrid composite clad on SS 316L steel through microwave heating
Authors: Kaushal S.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/09544054211021360
Published: February 2022
|
Type: Article
Keywords: clad | flexural | hybrid composite | Microwave heating | surface engineering | surfaces | wear
Volume: 236
Pages: 190-203
ISSN/eISSN: 09544054/20412975
|
Citations: 25
Article #:
Source ID: 20406
Funding:
|
| 398 |
Title: Cost–benefit comparison of fuel cell–based and battery-based renewable energy systems
Authors: Singla M.K.
Journal: International Journal of Energy Research
DOI: 10.1002/er.7291
Published: February 2022
|
Type: Article
Keywords:
Volume: 46
Pages: 1736-1755
ISSN/eISSN: 0363907X/1099114X
|
Citations: 13
Article #:
Source ID: 26676
Funding:
|
| 399 |
Title: Design and thermal analysis of nanofluid-based compound parabolic concentrator
Authors: Bhalla V.
Journal: Renewable Energy
DOI: 10.1016/j.renene.2021.12.064
Published: February 2022
|
Type: Article
Keywords: Compound parabolic concentrator | Exergy efficiency | Nanofluid | Nanoparticles | Thermal efficiency
Volume: 185
Pages: 348-362
ISSN/eISSN: 09601481/18790682
|
Citations: 12
Article #:
Source ID: 27569
Funding:
|
| 400 |
Title: Experimental Study of Single- Slope Solar Still Coupled With Nanofluid-Based Volumetric Absorption Solar Collector
Authors: Singh J.
Journal: Journal of Solar Energy Engineering Transactions of the ASME
DOI: 10.1115/1.4052478
Published: February 2022
|
Type: Article
Keywords: absorber | clean energy | collector | nanofluids | renewable | solar | solar collector | solar distillation | solar still | volumetric absorption
Volume: 144
Pages:
ISSN/eISSN: 01996231/15288986
|
Citations: 11
Article #: 011011
Source ID: 13321
Funding:
|
| 401 |
Title: Influence of anisotropy on creep in functionally graded variable thickness rotating disc
Authors: Khanna K.
Journal: Journal of Strain Analysis for Engineering Design
DOI: 10.1177/0309324721999971
Published: February 2022
|
Type: Article
Keywords: Anisotropy | creep | FG composite | rotating disc | variable thickness
Volume: 57
Pages: 95-103
ISSN/eISSN: 03093247/20413130
|
Citations: 4
Article #:
Source ID: 21189
Funding:
|
| 402 |
Title: Modelling of Surface Roughness and Change in Out‐of‐Roundness of Tool during Electrical Discharge Machining with Cermet Tool Tip Using Machine Learning
Authors: Walia A.S.
Journal: Processes
DOI: 10.3390/pr10020252
Published: February 2022
|
Type: Article
Keywords: Change in out‐of‐roundness | Discharge current | Electrical discharge machining | Flushing pressure | Gap voltage | Pulse off time | Pulse on time | Surface roughness
Volume: 10
Pages:
ISSN/eISSN: /22279717
|
Citations: 3
Article #: 252
Source ID: 21100838131
Funding:
|
| 403 |
Title: Multi-objective optimization of TW-ECSM process parameters for machining of advanced non-conducting material
Authors: Rattan N.
Journal: Indian Journal of Engineering and Materials Sciences
DOI:
Published: February 2022
|
Type: Article
Keywords: Fuzzy | Grey Relational | Material Removal Rate (MRR) | Optimization | Principal component | Quartz | Surface Roughness (SR) | TW-ECSM
Volume: 29
Pages: 52-61
ISSN/eISSN: 09714588/09751017
|
Citations: 0
Article #:
Source ID: 29812
Funding:
|
| 404 |
Title: Traffic noise prediction using machine learning and monte carlo data augmentation: A case study on the Patiala city in India
Authors: Singh D.
Journal: Journal of Physics Conference Series
DOI: 10.1088/1742-6596/2162/1/012021
Published: 25 January 2022
|
Type: Conference Paper
Keywords:
Volume: 2162
Pages:
ISSN/eISSN: 17426588/17426596
|
Citations: 7
Article #: 012021
Source ID: 130053
Funding:
|
| 405 |
Title: IoT-enabled smart healthcare systems, services and applications
Authors: Rani S.
Journal: Iot Enabled Smart Healthcare Systems Services and Applications
DOI: 10.1002/9781119816829
Published: 14 January 2022
|
Type: Book
Keywords:
Volume:
Pages: 1-256
ISSN/eISSN: /
|
Citations: 3
Article #:
Source ID: 21101134722
Funding:
|
| 406 |
Title: Additive manufacturing-based design approaches and challenges for orthopaedic bone screws: a state-of-the-art review
Authors: Agarwal R.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-021-03331-8
Published: January 2022
|
Type: Review
Keywords: Additive manufacturing | Bio-absorbable | Biomaterial | Bone-screw-related complications | Magnesium | Orthopaedic bone screw
Volume: 44
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 56
Article #: 37
Source ID: 71359
Funding:
|
| 407 |
Title: On mechanical characterization of 3-D printed PLA-PVC-wood dust-Fe3O4 composite
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705719879195
Published: January 2022
|
Type: Article
Keywords: 3-D printing | break strength | infill density | Peak strength | percentage porosity
Volume: 35
Pages: 36-53
ISSN/eISSN: 08927057/15307980
|
Citations: 47
Article #:
Source ID: 13690
Funding:
|
| 408 |
Title: Mechanical and biological behaviour of additive manufactured biomimetic biodegradable orthopaedic cortical screws
Authors: Agarwal R.
Journal: Rapid Prototyping Journal
DOI: 10.1108/RPJ-01-2022-0006
Published: 2022
|
Type: Article
Keywords: Additive manufacturing | Biopolymer | Compressive strength | Cortical screw | Degradation rate
Volume:
Pages:
ISSN/eISSN: 13552546/
|
Citations: 26
Article #:
Source ID: 21691
Funding:
|
| 409 |
Title: Monitoring structural behaviour of concrete beams reinforced with steel and GFRP bars using acoustic emission and digital image correlation techniques
Authors: Sharma G.
Journal: Structure and Infrastructure Engineering
DOI: 10.1080/15732479.2020.1836661
Published: 2022
|
Type: Article
Keywords: Acoustic emission | digital image correlation | GFRP bars | reinforced concrete | reinforcement | surface strains
Volume: 18
Pages: 167-182
ISSN/eISSN: 15732479/17448980
|
Citations: 20
Article #:
Source ID: 10600153366
Funding:
|
| 410 |
Title: A thermo-mechanical fracture analysis of linear elastic materials using XIGA
Authors: Yadav A.
Journal: Mechanics of Advanced Materials and Structures
DOI: 10.1080/15376494.2020.1838006
Published: 2022
|
Type: Article
Keywords: Adiabatic crack | isothermal crack | SIFs | thermo-mechanical fracture | voids | XIGA
Volume: 29
Pages: 1730-1755
ISSN/eISSN: 15376494/15376532
|
Citations: 17
Article #:
Source ID: 17827
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 411 |
Title: A novel drill bit design for reducing bone-chip morphology in orthopaedic bone drilling
Authors: Agarwal R.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2022.02.408
Published: January 2022
|
Type: Article
Keywords: Bone debris | Chip morphology | Diamond-impregnated tool | Drill bit | Grit size
Volume: 63
Pages: 131-135
ISSN/eISSN: /22147853
|
Citations: 14
Article #:
Source ID: 21100370037
Funding:
|
| 412 |
Title: A Review on Fracture Analysis of CNT/Graphene Reinforced Composites for Structural Applications
Authors: Yadav A.
Journal: Archives of Computational Methods in Engineering
DOI: 10.1007/s11831-021-09650-2
Published: January 2022
|
Type: Review
Keywords:
Volume: 29
Pages: 545-582
ISSN/eISSN: 11343060/18861784
|
Citations: 14
Article #:
Source ID: 18093
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 413 |
Title: Improved surface morphology by reforming of oxygen functional groups of Indian coal upon irradiating with microwave radiations
Authors: Singh H.
Journal: International Journal of Coal Preparation and Utilization
DOI: 10.1080/19392699.2020.1760854
Published: 2022
|
Type: Article
Keywords: coal upgrading | coal water slurry | functional groups | Microwave treatment | reforming | rheological characteristics
Volume: 42
Pages: 1740-1758
ISSN/eISSN: 19392699/19392702
|
Citations: 13
Article #:
Source ID: 12400154727
Funding:
|
| 414 |
Title: Investigation for mechanical properties of dissimilar friction stir welded joints of AA5083 and pure Cu
Authors: Ghangas G.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2021.12.163
Published: 2022
|
Type: Conference Paper
Keywords: Aluminum alloy | Copper | FSW | Mechanical strength | Tool rotational speed
Volume: 56
Pages: 77-81
ISSN/eISSN: /22147853
|
Citations: 8
Article #:
Source ID: 21100370037
Funding:
|
| 415 |
Title: Performance investigation of a concentric double tube heat exchanger using twisted tape inserts and nanofluid
Authors: Kundan L.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2021.1946729
Published: 2022
|
Type: Article
Keywords: CFD | heat exchanger | multiphase flow | Nanofluid | turbulators | twist pipe inserts
Volume: 40
Pages: 307-324
ISSN/eISSN: 02726351/15480046
|
Citations: 8
Article #:
Source ID: 13661
Funding:
|
| 416 |
Title: Thermal performance enhancement of basin-type solar still coupled with mini solar pond and shallow solar pond in closed-cycle mode
Authors: Kumar Singh S.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2022.2108169
Published: 2022
|
Type: Article
Keywords: distillate | mini solar pond | shallow solar pond | Solar desalination | solar still
Volume: 44
Pages: 7237-7251
ISSN/eISSN: 15567036/15567230
|
Citations: 8
Article #:
Source ID: 4500151514
Funding:
|
| 417 |
Title: Effect of biasing conditions on the performance of a SMA spring actuator under thermo-mechanical loading
Authors: Bhatt N.
Journal: Mechanics of Advanced Materials and Structures
DOI: 10.1080/15376494.2021.1934759
Published: 2022
|
Type: Article
Keywords: Antagonistic system | biasing conditions | constitutive model | shape memory alloy | spring | thermo-mechanical loading
Volume: 29
Pages: 4599-4613
ISSN/eISSN: 15376494/15376532
|
Citations: 8
Article #:
Source ID: 17827
Funding:
|
| 418 |
Title: Nanofluid-based wick-type integrated solar still for improved diurnal and nocturnal distillate production
Authors: Singh J.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2022.2143952
Published: 2022
|
Type: Article
Keywords: floating wick | Nanofluid | solar collector | solar distillation | solar pond
Volume: 44
Pages: 10094-10115
ISSN/eISSN: 15567036/15567230
|
Citations: 8
Article #:
Source ID: 4500151514
Funding: Thapar Institute of Engineering and Technology
|
| 419 |
Title: Effect of Fiber Pre-treatment Methods on Hygrothermal Aging Behavior of Agave Fiber Reinforced Polymer Composites
Authors: Kamboj I.
Journal: Journal of Natural Fibers
DOI: 10.1080/15440478.2020.1838398
Published: 2022
|
Type: Article
Keywords: Agave natural fibers | alkali Hornification | fiber Pre-treatment | hygrothermal aging | moisture diffusion | water hornification
Volume: 19
Pages: 2929-2942
ISSN/eISSN: 15440478/1544046X
|
Citations: 8
Article #:
Source ID: 130154
Funding:
|
| 420 |
Title: CFD analysis of an exhaust manifold for emission reduction
Authors: Bral P.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2022.03.202
Published: January 2022
|
Type: Conference Paper
Keywords: Back pressure | CFD (computation fluid dynamics) | Emission | Exhaust manifold | Exhaust velocity
Volume: 63
Pages: 354-361
ISSN/eISSN: /22147853
|
Citations: 6
Article #:
Source ID: 21100370037
Funding:
|
| 421 |
Title: On synergistic effect of BaTiO3 and graphene reinforcement in polyvinyl diene fluoride matrix for four dimensional applications
Authors: Sharma R.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/09544062211015763
Published: January 2022
|
Type: Article
Keywords: BaTiO3 | Chemical assisted mechanical blending | four dimensional applications | piezo-electric | polyvinyl diene fluoride
Volume: 236
Pages: 276-292
ISSN/eISSN: 09544062/20412983
|
Citations: 6
Article #:
Source ID: 20407
Funding:
|
| 422 |
Title: Real-time model inversion control for speed recovery of hydrostatic drive used in the rotary head of a blasthole drilling machine
Authors: Tripathi J.P.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-021-03347-0
Published: January 2022
|
Type: Article
Keywords: Blasthole drilling machines | Bond graph | Hydraulic drive system | Inverse model-based control | Open-pit mines | PID control | System inversion
Volume: 44
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 4
Article #: 47
Source ID: 71359
Funding:
|
| 423 |
Title: Development of a new in-situ rotating magnetorheological honing technique for fine finishing the inner cylindric surfaces
Authors: Paswan S.K.
Journal: Machining Science and Technology
DOI: 10.1080/10910344.2022.2129990
Published: 2022
|
Type: Article
Keywords: Conventional honing | in-situ magnetorheological honing tool | magnetic field | magnetorheological polishing fluid | magnetostatic finite element analysis | surface roughness and characteristics
Volume: 26
Pages: 665-699
ISSN/eISSN: 10910344/15322483
|
Citations: 4
Article #:
Source ID: 21223
Funding: Science and Engineering Research Board
|
| 424 |
Title: Dynamic modeling and analysis of a hydro-mechanical power transmission system
Authors: Kumar R.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2022.03.311
Published: January 2022
|
Type: Conference Paper
Keywords: Bond graph | Hydraulic power transmission | Hydro-mechanical power transmission | Mechanical power transmission
Volume: 61
Pages: 50-54
ISSN/eISSN: /22147853
|
Citations: 3
Article #:
Source ID: 21100370037
Funding:
|
| 425 |
Title: Automatic Machine for Round Welding Using Programmable Logic Controller (PLC)
Authors: Gupta G.
Journal: Smart Innovation Systems and Technologies
DOI: 10.1007/978-981-16-6482-3_41
Published: 2022
|
Type: Conference Paper
Keywords: Automation | Ladder logic | Round welding | SolidWorks | Welding
Volume: 265
Pages: 411-422
ISSN/eISSN: 21903018/21903026
|
Citations: 3
Article #:
Source ID: 21100204111
Funding:
|
| 426 |
Title: Investigations on Chemical Assisted Mechanically Blended 3D Printed Functional Prototypes of PVDF-BaTiO3-Gr Composite
Authors: Sharma R.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00144-9
Published: 1 January 2022
|
Type: Book Chapter
Keywords: Barium titanete (BaTiO3) | Dynamic mechanical analysis (DMA) | Electroactive polymers (EAP) | Graphene (Gr) | Polyvinylidene fluoride (PVDF)
Volume: 1-4
Pages: 194-203
ISSN/eISSN: /
|
Citations: 3
Article #:
Source ID: 21101143101
Funding:
|
| 427 |
Title: Effect of pump leakage on slip and pressure loss in a hydraulic cylinder drive
Authors: Kumar Singh U.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2022.04.033
Published: January 2022
|
Type: Conference Paper
Keywords: Bond graph | Dynamic characteristic | Hydraulic cylinder drive | Pressure loss | Pump leakage | Slip loss | System identification | Variable speed vane pump
Volume: 63
Pages: 573-578
ISSN/eISSN: /22147853
|
Citations: 3
Article #:
Source ID: 21100370037
Funding:
|
| 428 |
Title: Mathematical Model of SMA Spring Actuator in a Miniature Flexible Tube Robot
Authors: Bhatt N.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-16-0550-5_147
Published: 2022
|
Type: Conference Paper
Keywords: Mathematical model | Recovery force | Shape memory alloy
Volume:
Pages: 1529-1536
ISSN/eISSN: 21954356/21954364
|
Citations: 2
Article #:
Source ID: 21100431311
Funding:
|
| 429 |
Title: Trajectory tracking of 4-DOF robot manipulator: a bond graph approach
Authors: Singh R.
Journal: International Journal of Mechatronics and Automation
DOI: 10.1504/IJMA.2022.130398
Published: 2022
|
Type: Article
Keywords: 4-DOF robotic arm | bond graph approach | GRBL controller | pick | place | position control | Simulink
Volume: 9
Pages: 180-191
ISSN/eISSN: 20451059/20451067
|
Citations: 2
Article #:
Source ID: 21100325719
Funding:
|
| 430 |
Title: Two-way programming of secondary recycled poly(lactic)acid composite matrix using magnetic field as stimulus
Authors: Kumar S.
Journal: 4d Printing Fundamentals and Applications
DOI: 10.1016/B978-0-12-823725-0.00006-0
Published: 1 January 2022
|
Type: Book Chapter
Keywords: 4D printing | Hysteresis curve | Magnetic field stimulus | One-way programming | PLA composite matrix | Superparamagnetic | Two-way programming
Volume:
Pages: 35-50
ISSN/eISSN: /
|
Citations: 1
Article #:
Source ID: 21101086593
Funding:
|
| 431 |
Title: Two-way programming of secondary recycled poly(lactic)acid composite matrix using magnetic field as stimulus
Authors: Kumar S.
Journal: 4d Printing Fundamentals and Applications
DOI: 10.1016/B978-0-12-823725-0.00006-0
Published: 1 January 2022
|
Type: Book Chapter
Keywords: 4D printing | Hysteresis curve | Magnetic field stimulus | One-way programming | PLA composite matrix | Superparamagnetic | Two-way programming
Volume:
Pages: 35-50
ISSN/eISSN: /
|
Citations: 1
Article #:
Source ID: 21101086593
Funding:
|
| 432 |
Title: Implementation of point interpolation meshless method for failure analysis of laminated composite beams
Authors: Shah K.S.
Journal: Mechanics of Advanced Materials and Structures
DOI: 10.1080/15376494.2021.1916137
Published: 2022
|
Type: Article
Keywords: Composite laminated beam | failure analysis | geometric nonlinearity | higher-order beam theory | meshless method | Mori-Tanaka model
Volume: 29
Pages: 3997-4007
ISSN/eISSN: 15376494/15376532
|
Citations: 1
Article #:
Source ID: 17827
Funding:
|
| 433 |
Title: On Wear of Multi Material 3D Printed PLA Composites
Authors: Kumar S.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00043-2
Published: 1 January 2022
|
Type: Book Chapter
Keywords: FDM | Multi material | Photomicrographic investigations | Porous structure | Surface roughness profile | Wear analysis
Volume: 1-4
Pages: 413-425
ISSN/eISSN: /
|
Citations: 1
Article #:
Source ID: 21101143101
Funding:
|
| 434 |
Title: MECHANICAL AND METALLURGICAL CHARACTERIZATION OF ULTRAFINE GRAINED TITANIUM LAMINATES DEVELOPED BY LSEM
Authors: Kumar P.
Journal: Proceedings of ASME 2022 17th International Manufacturing Science and Engineering Conference Msec 2022
DOI: 10.1115/MSEC2022-85839
Published: 2022
|
Type: Conference Paper
Keywords: Crystallite size | Deformation | EBSD | Hardness | Strain hardening
Volume: 1
Pages:
ISSN/eISSN: /
|
Citations: 1
Article #: V001T07A021
Source ID: 21101117306
Funding:
|
| 435 |
Title: Effect of activated fluxes during welding of dissimilar stainless steels using semi-automatic setup
Authors: Kumar V.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2022.2065001
Published: 2022
|
Type: Article
Keywords: activated | bending | dissimilar | flux | GMAW | microhardness | SEM | Semiautomatic | stainless | steel | tensile | welding
Volume: 37
Pages: 1780-1789
ISSN/eISSN: 10426914/15322475
|
Citations: 1
Article #:
Source ID: 21054
Funding:
|
| 436 |
Title: On 3D printed multiblended and hybrid-blended poly(lactic)acid composite matrix for self-assembly
Authors: Kumar S.
Journal: 4d Printing Fundamentals and Applications
DOI: 10.1016/B978-0-12-823725-0.00003-5
Published: 1 January 2022
|
Type: Book Chapter
Keywords: Flexural properties | FTIR analysis | Hybrid-blended matrix | Multimaterial matrix | Tensile properties | VSM analysis
Volume:
Pages: 1-15
ISSN/eISSN: /
|
Citations: 1
Article #:
Source ID: 21101086593
Funding:
|
| 437 |
Title: Dual/Multi Printing of Thermoplastic Polymers
Authors: Kumar S.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00004-3
Published: 1 January 2022
|
Type: Book Chapter
Keywords: Dual material 3D printing | Fe3O4 powder | Flexural properties | Morphological properties | Multi material 3D printing | PLA | PVC | Tensile properties | TiO2 | Wood powder
Volume: 1-4
Pages: 133-140
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101143101
Funding:
|
| 438 |
Title: Dual/Multi Printing of Thermoplastic Polymers
Authors: Kumar S.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00004-3
Published: 1 January 2022
|
Type: Book Chapter
Keywords: Dual material 3D printing | Fe3O4 powder | Flexural properties | Morphological properties | Multi material 3D printing | PLA | PVC | Tensile properties | TiO2 | Wood powder
Volume: 1-4
Pages: 133-140
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101143101
Funding:
|
| 439 |
Title: PVDF-graphene-BaTiO3 composite for 4D applications
Authors: Sharma R.
Journal: 4d Printing Fundamentals and Applications
DOI: 10.1016/B978-0-12-823725-0.00001-1
Published: 1 January 2022
|
Type: Book Chapter
Keywords: 4D applications | BaTiO3 | D33 | Grapheme | Piezoelectricity | PVDF
Volume:
Pages: 103-119
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101086593
Funding:
|
| 440 |
Title: Thermosetting Polymers for 4D Printing
Authors: Kumar S.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00026-2
Published: 1 January 2022
|
Type: Book Chapter
Keywords: 4D printing | Bakelite | Chemical blending | Composite matrix | Thermosetting polymer
Volume: 1-4
Pages: 596-602
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101143101
Funding:
|
| 441 |
Title: Multi Material Printing of Recycled Thermoplastics and Thermosetting Polymers
Authors: Kumar S.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00028-6
Published: 1 January 2022
|
Type: Book Chapter
Keywords: 3D printed pins | 3D rendering | Chemical blending | Optical microscopic investigation | Thermoplastic matrix | Thermoset | Wear analysis
Volume: 1-4
Pages: 271-280
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101143101
Funding:
|
| 442 |
Title: Comparative analysis between aluminium and steel based bicycle crank using numerical simulation
Authors: Nayak A.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2022.03.448
Published: January 2022
|
Type: Conference Paper
Keywords: Aluminium | Bicycle crank | FEM | Strength analysis | Structural steel
Volume: 63
Pages: 453-461
ISSN/eISSN: /22147853
|
Citations: 0
Article #:
Source ID: 21100370037
Funding:
|
| 443 |
Title: Modeling and analysis of articulated steering mechanism
Authors: Sreeharsha R.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2022.04.471
Published: January 2022
|
Type: Conference Paper
Keywords: Articulated Steering System | Orbitrol valve | Steering profile | Steering response
Volume: 62
Pages: 3800-3803
ISSN/eISSN: /22147853
|
Citations: 0
Article #:
Source ID: 21100370037
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 444 |
Title: Preface
Authors: Mallick S.S.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2022.2016229
Published: 2022
|
Type: Editorial
Keywords:
Volume: 40
Pages: 336
ISSN/eISSN: 02726351/15480046
|
Citations: 0
Article #:
Source ID: 13661
Funding:
|
| 445 |
Title: Comparison of PPC and LQR Controller for Stabilization of Cart Pendulum System: Simulation and Real-Time Study
Authors: Singh G.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-16-0550-5_131
Published: 2022
|
Type: Conference Paper
Keywords: Cart pendulum | LQR controller | Motor dynamic | Pole placement controller | Stabilization
Volume:
Pages: 1383-1392
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 446 |
Title: Thermoplastic Polymer Composites
Authors: Kumar S.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00003-1
Published: 1 January 2022
|
Type: Book Chapter
Keywords: Cp and Cpk | Feedstock filament | Inhouse fabrication | Process control | Twin screw extrusion
Volume: 1-4
Pages: 550-557
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101143101
Funding:
|
| 447 |
Title: PI Control-Based Modelling of Segway Using Bond Graph
Authors: Kumar A.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-16-0550-5_9
Published: 2022
|
Type: Conference Paper
Keywords: Bond graph | PI controller | Segway | Stabilization control | Swing up control
Volume:
Pages: 69-81
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 448 |
Title: Designing, Manufacturing and Testing of New Radiator
Authors: Gupta G.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-19-2890-1_29
Published: 2022
|
Type: Conference Paper
Keywords: Automobile | Fabrication | Heat exchanger | Simulation | SolidWorks
Volume:
Pages: 295-307
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 449 |
Title: Correlation Matrix for Mechanical, Rheological and Morphological Properties of PP-CaCO3 Composites
Authors: Kumar S.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00213-3
Published: 1 January 2022
|
Type: Book Chapter
Keywords: Break strength | Correlation matrix | Feedstock filament | Mechanical properties | Morphological properties | Peak strength | Rheological | Shore D hardness
Volume: 1-4
Pages: 125-132
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101143101
Funding:
|
| 450 |
Title: MAGNETORHEOLOGICAL FINE FINISHING OF TUNGSTEN CARBIDE MOLD MATERIAL
Authors: Thomas A.
Journal: ASME International Mechanical Engineering Congress and Exposition Proceedings Imece
DOI: 10.1115/IMECE2022-96885
Published: 2022
|
Type: Conference Paper
Keywords: dies | magnetorheological finishing | mold | surface morphology | surface roughness | Tungsten carbide
Volume: 2-A
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #: V02AT02A046
Source ID: 21101136825
Funding:
|
| 451 |
Title: On Dynamic Mechanical Analysis of Mechanically Blended 3D Printed Functional Prototypes of PVDF-BaTiO3-Gr Composite
Authors: Sharma R.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00145-0
Published: 1 January 2022
|
Type: Book Chapter
Keywords: BaTiO3 | Dynamic mechanical analysis | Electroactive polymers | Graphene | Polyvinyldeine fluoride
Volume: 1-4
Pages: 318-326
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101143101
Funding:
|
| 452 |
Title: On Multi-Factor Optimization for Hybrid Feed-Stock Filament of PLA Using TOPSIS
Authors: Kumar S.
Journal: Encyclopedia of Materials Plastics and Polymers
DOI: 10.1016/B978-0-12-820352-1.00165-6
Published: 1 January 2022
|
Type: Book Chapter
Keywords: 3D printing | Break strength | Feedstock filament | Functional prototypes | Mechanical properties | Morphological properties | Peak strength | Porosity | Shore D hardness
Volume: 1-4
Pages: 361-367
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101143101
Funding:
|
| 453 |
Title: A critical study on genetically engineered bioweapons and computer-based techniques as counter measure
Authors: Sharma M.
Journal: Machine Learning and Iot for Intelligent Systems and Smart Applications
DOI: 10.1201/9781003194415-8
Published: 17 December 2021
|
Type: Book Chapter
Keywords:
Volume:
Pages: 127-150
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101096030
Funding:
|
| 454 |
Title: Influence of porosity distribution on static and buckling responses of porous functionally graded plates
Authors: Dhuria M.
Journal: Structures
DOI: 10.1016/j.istruc.2021.08.050
Published: December 2021
|
Type: Article
Keywords: Analytical solution | Buckling | Functionally graded structures | Porous plates | Shear deformation theory | Static
Volume: 34
Pages: 1458-1474
ISSN/eISSN: /23520124
|
Citations: 64
Article #:
Source ID: 21100372467
Funding:
|
| 455 |
Title: Comparison of wear behaviour of LM13 Al−Si alloy based composites reinforced with synthetic (B4C) and natural (ilmenite) ceramic particles
Authors: GUPTA R.
Journal: Transactions of Nonferrous Metals Society of China English Edition
DOI: 10.1016/S1003-6326(21)65752-7
Published: December 2021
|
Type: Article
Keywords: aluminium matrix composites | boron carbide | ilmenite | particle-reinforcement | SEM−EDS | tribolayer | wear test | XRD analysis
Volume: 31
Pages: 3613-3625
ISSN/eISSN: 10036326/22103384
|
Citations: 34
Article #:
Source ID: 27854
Funding: Council of Scientific and Industrial Research, India
|
| 456 |
Title: Mechanical Properties of Selective Laser Melted CoCr Alloys: A Review
Authors: Saini J.S.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-021-06283-1
Published: December 2021
|
Type: Review
Keywords: CoCr alloys | heat treatment | mechanical properties | microstructure | selective laser melting
Volume: 30
Pages: 8700-8714
ISSN/eISSN: 10599495/15441024
|
Citations: 16
Article #:
Source ID: 21160
Funding:
|
| 457 |
Title: Mechanical and corrosion behavior of SiC/Graphite/ZrO2 hybrid reinforced aluminum-based composites for marine environment
Authors: Yadav S.
Journal: Surface Topography Metrology and Properties
DOI: 10.1088/2051-672X/ac2f87
Published: December 2021
|
Type: Article
Keywords: Aluminum-based metal matrix composites | Micro/nano hybrid composite | Potentiodynamic polarization | Stir casting
Volume: 9
Pages:
ISSN/eISSN: /2051672X
|
Citations: 14
Article #: 045022
Source ID: 21100469364
Funding:
|
| 458 |
Title: Cupola slag as partial replacement of fine aggregate in concrete – An experimental study
Authors: Waseem S.A.
Journal: Journal of Building Engineering
DOI: 10.1016/j.jobe.2021.103343
Published: December 2021
|
Type: Article
Keywords: Abrasion resistance | Compressive strength | Cupola slag | Statistical analysis | Tensile strength | Water permeability
Volume: 44
Pages:
ISSN/eISSN: /23527102
|
Citations: 13
Article #: 103343
Source ID: 21100389518
Funding:
|
| 459 |
Title: Magnetorheological finishing of polyamide materials for improving their functional performance
Authors: Arora K.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-021-03284-y
Published: December 2021
|
Type: Article
Keywords: Finishing | Magnetic field | Magnetorheological polishing fluid | Polyamide material | Polymers | Surface morphology | Surface roughness
Volume: 43
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 6
Article #: 576
Source ID: 71359
Funding:
|
| 460 |
Title: A new approach to find gouge free tool positions for a toroidal cutter for Bézier surfaces in five-axis machining
Authors: Singh M.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-021-07849-y
Published: December 2021
|
Type: Article
Keywords: 5-axis machining | Gouge checking | Multi-point machining
Volume: 117
Pages: 3053-3062
ISSN/eISSN: 02683768/14333015
|
Citations: 3
Article #:
Source ID: 20428
Funding: Canadian Network for Research and Innovation in Machining Technology, Natural Sciences and Engineering Research Council of Canada
|
| 461 |
Title: Comparative analysis of numerical methods for constitutive modeling of shape memory alloys
Authors: Bhatt N.
Journal: Modelling and Simulation in Materials Science and Engineering
DOI: 10.1088/1361-651X/ac3052
Published: December 2021
|
Type: Article
Keywords:
Volume: 29
Pages:
ISSN/eISSN: 09650393/1361651X
|
Citations: 2
Article #: 085012
Source ID: 28704
Funding:
|
| 462 |
Title: Slurryability and flowability of coal water slurry: Effect of particle size distribution
Authors: Singh H.
Journal: Journal of Cleaner Production
DOI: 10.1016/j.jclepro.2021.129183
Published: 10 November 2021
|
Type: Article
Keywords: Coal water suspension | Headloss characteristics | Particle size distribution | Rheological characteristics | Settling characteristics | Specific enthalpy consumption
Volume: 323
Pages:
ISSN/eISSN: 09596526/
|
Citations: 50
Article #: 129183
Source ID: 19167
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 463 |
Title: Prediction of tool shape in electrical discharge machining of en31 steel using machine learning techniques
Authors: Walia A.S.
Journal: Metals
DOI: 10.3390/met11111668
Published: November 2021
|
Type: Article
Keywords: Decision tree | Electric discharge machining (EDM) | Generalized linear model | Neural network | Out-of-roundness | Random forest | Tool shape
Volume: 11
Pages:
ISSN/eISSN: /20754701
|
Citations: 32
Article #: 1668
Source ID: 21100399731
Funding:
|
| 464 |
Title: Study of vibration modes and strain distribution of a flow energy harvester in the wake region of different bluff bodies
Authors: Agarwal A.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406221996737
Published: November 2021
|
Type: Article
Keywords: bluff body | energy harvester | Flow-induced vibration | piezoelectric | vortex-induced vibration
Volume: 235
Pages: 5994-6008
ISSN/eISSN: 09544062/20412983
|
Citations: 3
Article #:
Source ID: 20407
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 465 |
Title: The self-healing investigations on fiber-reinforced polymer composites through a novel compartmented microcapillary approach
Authors: Jain D.
Journal: Polymers and Polymer Composites
DOI: 10.1177/0967391120985740
Published: November 2021
|
Type: Article
Keywords: flexural loading | polymer composites | Self-healing | SEM investigations
Volume: 29
Pages: S65-S73
ISSN/eISSN: 09673911/14782391
|
Citations: 2
Article #:
Source ID: 14466
Funding: Lovely Professional University
|
| 466 |
Title: Correction to: Experimental investigation for fine finishing of the tapered mould cavity using a newly developed GWMRF process (Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2021), 43, 9, (444), 10.1007/s40430-021-03159-2)
Authors: Aggarwal A.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-021-03198-9
Published: November 2021
|
Type: Erratum
Keywords:
Volume: 43
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 0
Article #: 506
Source ID: 71359
Funding:
|
| 467 |
Title: A framework for effective and clean conversion of machining waste into metal powder feedstock for additive manufacturing
Authors: Dhiman S.
Journal: Cleaner Engineering and Technology
DOI: 10.1016/j.clet.2021.100151
Published: October 2021
|
Type: Review
Keywords: Additive manufacturing | Ball milling | Metal powder | Metal waste | Recycling | Selective laser melting | Sustainability
Volume: 4
Pages:
ISSN/eISSN: /26667908
|
Citations: 42
Article #: 100151
Source ID: 21101059780
Funding:
|
| 468 |
Title: Development and characterization of multiwalled carbon nanotube-reinforced microwave sintered hybrid aluminum metal matrix composites: An experimental investigation on mechanical and tribological performances
Authors: Kumar R.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/14644207211028969
Published: October 2021
|
Type: Article
Keywords: carbon nanotubes | Metal–matrix composites | microstructures | sintering | wear
Volume: 235
Pages: 2310-2323
ISSN/eISSN: 14644207/20413076
|
Citations: 21
Article #:
Source ID: 20971
Funding:
|
| 469 |
Title: Comparison of tool wear during friction stir welding of Al alloy and Al-SiC metal matrix composite
Authors: Bist A.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/09544089211005994
Published: October 2021
|
Type: Article
Keywords: friction stir welding | metal matrix composite | response surface methodology | Tool wear
Volume: 235
Pages: 1522-1533
ISSN/eISSN: 09544089/20413009
|
Citations: 21
Article #:
Source ID: 20408
Funding:
|
| 470 |
Title: Adoption of strategies for clean combustion of biomass in boilers
Authors: Sharma S.
Journal: Corrosion Reviews
DOI: 10.1515/corrrev-2020-0095
Published: 1 October 2021
|
Type: Review
Keywords: Biomass-fuel | Boilers | Corrosion
Volume: 39
Pages: 387-408
ISSN/eISSN: 03346005/
|
Citations: 15
Article #:
Source ID: 32631
Funding:
|
| 471 |
Title: Surface roughness analysis of H13 steel during electrical discharge machining process using Cu–TiC sintered electrode
Authors: Walia A.S.
Journal: Materials
DOI: 10.3390/ma14205943
Published: October-2 2021
|
Type: Article
Keywords: Cermet tooltip | Dimensional analysis | EDM | Pulse current | Pulse duration | Pulse interval | Surface roughness
Volume: 14
Pages:
ISSN/eISSN: /19961944
|
Citations: 13
Article #: 5943
Source ID: 76627
Funding:
|
| 472 |
Title: Addition of compatibilized nanoclay to GFRCs for improved izod impact strength and tensile properties
Authors: Shelly D.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/14644207211009923
Published: October 2021
|
Type: Article
Keywords: mechanical properties | nanoclay | nanocomposites | Polymer composites | silanization
Volume: 235
Pages: 2022-2035
ISSN/eISSN: 14644207/20413076
|
Citations: 12
Article #:
Source ID: 20971
Funding:
|
| 473 |
Title: A non-polynomial axiomatic framework for modelling and bending analysis of doubly curved spherical and cylindrical shells: An analytical solution
Authors: Sharma L.K.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/14644207211023528
Published: October 2021
|
Type: Article
Keywords: Laminated composite shells | Navier solution | principle of virtual work | shear deformation theory
Volume: 235
Pages: 2083-2099
ISSN/eISSN: 14644207/20413076
|
Citations: 10
Article #:
Source ID: 20971
Funding:
|
| 474 |
Title: NeT-Vent: Low-Cost, Rapidly Scalable and IoT-enabled Smart Invasive Mechanical Ventilator with adaptive control to reduce incidences of Pulmonary Barotrauma in SARS-CoV-2 patients
Authors: Chharia A.
Journal: 2021 2nd Global Conference for Advancement in Technology Gcat 2021
DOI: 10.1109/GCAT52182.2021.9587553
Published: 1 October 2021
|
Type: Conference Paper
Keywords: Biomedical Engineering | Computer Aided Design | COVID-19 | Internet-of-Things | Invasive Mechanical Ventilation | Ventilator induced lung injury
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 6
Article #:
Source ID: 21101066158
Funding:
|
| 475 |
Title: Stress analysis of smart composite plate structures
Authors: Chanda A.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406220975449
Published: October 2021
|
Type: Article
Keywords: analytical | composite laminate | equilibrium equations | inverse sine hyperbolic | Piezoelectric
Volume: 235
Pages: 5070-5092
ISSN/eISSN: 09544062/20412983
|
Citations: 3
Article #:
Source ID: 20407
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 476 |
Title: Modeling of surface roughness in a novel magnetorheological gear profile finishing process
Authors: Yadav R.D.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406220978265
Published: October 2021
|
Type: Article
Keywords: finishing mechanism | gear teeth profile | magnetic field | magnetic normal force | Magnetorheological gear profile finishing | surface roughness
Volume: 235
Pages: 5017-5042
ISSN/eISSN: 09544062/20412983
|
Citations: 2
Article #:
Source ID: 20407
Funding:
|
| 477 |
Title: A novel hybrid Fuzzy AHP-TOPSIS Approach towards Enhanced multi-criteria Feature-based EV Recommender System
Authors: Prajapati S.
Journal: 2021 2nd Global Conference for Advancement in Technology Gcat 2021
DOI: 10.1109/GCAT52182.2021.9587713
Published: 1 October 2021
|
Type: Conference Paper
Keywords: Analytic Hierarchy Process | Electric Vehicles | Fuzzy Decision Making | Recommender System | TOPSIS
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 1
Article #:
Source ID: 21101066158
Funding:
|
| 478 |
Title: Power generation using thermoelectric power generator with parabolic solar dish concentrator
Authors: Nyandang A.N.
Journal: Journal of Physics Conference Series
DOI: 10.1088/1742-6596/2013/1/012004
Published: 20 September 2021
|
Type: Conference Paper
Keywords:
Volume: 2013
Pages:
ISSN/eISSN: 17426588/17426596
|
Citations: 4
Article #: 012004
Source ID: 130053
Funding: Universiti Teknologi MARA
|
| 479 |
Title: Emphasis of Weld Time, Shielding Gas and Oxygen Content in Activated Fluxes on the Weldment Microstructure
Authors: Tathgir S.
Journal: Mechanical Engineering for Society and Industry
DOI: 10.31603/mesi.5903
Published: 8 September 2021
|
Type: Article
Keywords: Dendrite arm | Electron attachment | Grain growth | Hydrogen | Oxygen rich elements | Reverse marangoni | Short weld time
Volume: 1
Pages: 86-95
ISSN/eISSN: /27985245
|
Citations: 6
Article #:
Source ID: 21101176033
Funding:
|
| 480 |
Title: Study on barium titanate and graphene reinforced PVDF matrix for 4D applications
Authors: Sharma R.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705719865004
Published: September 2021
|
Type: Article
Keywords: 4-D printing | barium titanate | differential scanning calorimetry | fused deposition modeling | graphene | polyvinylidene fluoride | smart materials | twin screw extruder
Volume: 34
Pages: 1234-1253
ISSN/eISSN: 08927057/15307980
|
Citations: 46
Article #:
Source ID: 13690
Funding: Thapar Institute of Engineering and Technology
|
| 481 |
Title: Performance analysis of pump materials employed in bottom ash slurry erosion conditions
Authors: Singh J.
Journal: Jurnal Tribologi
DOI:
Published: September 2021
|
Type: Article
Keywords: Centrifugal pumps | Erosion | Slurry | Stainless steels | Wear
Volume: 30
Pages: 73-89
ISSN/eISSN: /22897232
|
Citations: 38
Article #:
Source ID: 21100975550
Funding:
|
| 482 |
Title: Performance analysis of basin-type vertical multiple-effect diffusion solar still integrated with solar pond: Energy, exergy and economical analysis
Authors: Dhindsa G.S.
Journal: International Journal of Low Carbon Technologies
DOI: 10.1093/ijlct/ctab004
Published: 1 September 2021
|
Type: Article
Keywords: exergy analysis | float wicks | multiple-effect still | solar pond
Volume: 16
Pages: 857-866
ISSN/eISSN: 17481317/17481325
|
Citations: 12
Article #:
Source ID: 7300153102
Funding:
|
| 483 |
Title: Microwave cladding of NiCrSiC-5Al2O3on austenitic stainless steel to improve cavitation erosion resistance
Authors: Bansal S.
Journal: Surface Topography Metrology and Properties
DOI: 10.1088/2051-672X/ac2032
Published: September 2021
|
Type: Article
Keywords: cavitation | composite clad | flexural strength | microhardness | microstructure | porosity | stand-off distance
Volume: 9
Pages:
ISSN/eISSN: /2051672X
|
Citations: 11
Article #: 035036
Source ID: 21100469364
Funding:
|
| 484 |
Title: Random vibration response of composite–sandwich laminates
Authors: Sahoo R.
Journal: Archive of Applied Mechanics
DOI: 10.1007/s00419-021-01976-4
Published: September 2021
|
Type: Article
Keywords: Composite and sandwich plates | Finite element method | First-order perturbation technique | Free vibration | Inverse hyperbolic zigzag theory | Random material properties
Volume: 91
Pages: 3755-3771
ISSN/eISSN: 09391533/14320681
|
Citations: 9
Article #:
Source ID: 13952
Funding:
|
| 485 |
Title: Experimental investigation for fine finishing of the tapered mould cavity using a newly developed GWMRF process
Authors: Aggarwal A.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-021-03159-2
Published: September 2021
|
Type: Article
Keywords: Cylindrical blind hole | Finishing | Magnetic field | Magnetorheological polishing fluid | Mould cavity | Surface roughness | Tapered
Volume: 43
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 3
Article #: 444
Source ID: 71359
Funding:
|
| 486 |
Title: Investigating the potential of redundant manipulators in narrow channels
Authors: Singla A.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406220964512
Published: September 2021
|
Type: Article
Keywords: Adaptive Neuro Fuzzy Inference System | medical surgery | obstacle avoidance | Redundancy resolution | task priority
Volume: 235
Pages: 3723-3736
ISSN/eISSN: 09544062/20412983
|
Citations: 2
Article #:
Source ID: 20407
Funding:
|
| 487 |
Title: On flexural and pull out properties of smart polymer based 3D printed functional prototypes
Authors: Sharma R.
Journal: Sadhana Academy Proceedings in Engineering Sciences
DOI: 10.1007/s12046-021-01709-x
Published: September 2021
|
Type: Article
Keywords: barium titanate | flexural properties | Fused deposition modelling | multifactor optimization | polyvinylidene fluoride | pull-out properties
Volume: 46
Pages:
ISSN/eISSN: 02562499/09737677
|
Citations: 2
Article #: 179
Source ID: 23531
Funding:
|
| 488 |
Title: Fracture monitoring of steel and GFRP reinforced concrete beams using acoustic emission and digital image correlation techniques
Authors: Sharma G.
Journal: Structural Concrete
DOI: 10.1002/suco.202000650
Published: August 2021
|
Type: Article
Keywords: acoustic emission | concrete | digital image correlation | hits | surface strains
Volume: 22
Pages: 1962-1976
ISSN/eISSN: 14644177/17517648
|
Citations: 25
Article #:
Source ID: 17442
Funding:
|
| 489 |
Title: Thermo-elastic analysis of cracked functionally graded materials using XIGA
Authors: Bhardwaj G.
Journal: Theoretical and Applied Fracture Mechanics
DOI: 10.1016/j.tafmec.2021.103016
Published: August 2021
|
Type: Article
Keywords: Defects | FGMs | Fracture | SIFs | Thermo-mechanical | XIGA
Volume: 114
Pages:
ISSN/eISSN: 01678442/
|
Citations: 19
Article #: 103016
Source ID: 14588
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 490 |
Title: Aging of bolted joints prepared from electron-beam-cured multiwalled carbon nanotube-based nanocomposites with variable torques
Authors: Kumar M.
Journal: Polymer Composites
DOI: 10.1002/pc.26119
Published: August 2021
|
Type: Article
Keywords: accelerated weathering | bolt torque | bolted joint | carbon fiber | MWCNT | radiation curing | thermal curing
Volume: 42
Pages: 4082-4104
ISSN/eISSN: 02728397/15480569
|
Citations: 14
Article #:
Source ID: 14433
Funding: Bhabha Atomic Research Centre
|
| 491 |
Title: Analysis of finishing performance in rotating magnetorheological honing process with the effect of particles motion
Authors: Paswan S.K.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/0954408921990132
Published: August 2021
|
Type: Article
Keywords: abrasive particles | iron particles | magnetic field | Magnetorheological honing process | MR polishing fluid | rotating cylinder | surface roughness
Volume: 235
Pages: 1104-1118
ISSN/eISSN: 09544089/20413009
|
Citations: 6
Article #:
Source ID: 20408
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 492 |
Title: Sliding wear behaviour of CP titanium laminates produced by large strain extrusion machining
Authors: Kumar P.
Journal: Wear
DOI: 10.1016/j.wear.2021.203774
Published: 18 July 2021
|
Type: Article
Keywords: CP Titanium | Hardness | Large strain extrusion machining | Shear deformation | Surface roughness | Ultrafine-grained materials | Wear
Volume: 477
Pages:
ISSN/eISSN: 00431648/
|
Citations: 12
Article #: 203774
Source ID: 22156
Funding:
|
| 493 |
Title: Efficient Fruit Grading System Using Spectrophotometry and Machine Learning Approaches
Authors: Chopra H.
Journal: IEEE Sensors Journal
DOI: 10.1109/JSEN.2021.3075465
Published: 15 July 2021
|
Type: Article
Keywords: computer vision | driverlessAI | fruit grading | Machine learning | spectroscopy
Volume: 21
Pages: 16162-16169
ISSN/eISSN: 1530437X/15581748
|
Citations: 52
Article #: 9415633
Source ID: 15047
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 494 |
Title: Theoretical and experimental investigation on surface roughness of straight bevel gears using a novel magnetorheological finishing process
Authors: Arora K.
Journal: Wear
DOI: 10.1016/j.wear.2021.203693
Published: 15 July 2021
|
Type: Article
Keywords: Bevel gears | Dimensional accuracy | Magnetic field | Magnetorheological finishing | Surface roughness | Wear characteristics
Volume: 476
Pages:
ISSN/eISSN: 00431648/
|
Citations: 28
Article #: 203693
Source ID: 22156
Funding:
|
| 495 |
Title: Theoretical analysis of a novel in-situ magnetorheological honing process for finishing the internal surface of tubular workpieces
Authors: Paswan S.K.
Journal: Wear
DOI: 10.1016/j.wear.2021.203698
Published: 15 July 2021
|
Type: Article
Keywords: In-situ magnetorheological honing tool | Magnetic field | Magnetorheological honing | Surface roughness | Traditional honing | Wear mechanism
Volume: 476
Pages:
ISSN/eISSN: 00431648/
|
Citations: 8
Article #: 203698
Source ID: 22156
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 496 |
Title: On investigation of rheological, mechanical and morphological characteristics of waste polymer-based feedstock filament for 3D printing applications
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705719856063
Published: July 2021
|
Type: Article
Keywords: break strength | HDPE | LDPE | peak strength | porosity | shore D hardness and reinforcement | waste polymer
Volume: 34
Pages: 902-928
ISSN/eISSN: 08927057/15307980
|
Citations: 79
Article #:
Source ID: 13690
Funding:
|
| 497 |
Title: Investigations for magnetic properties of PLA-PVC-Fe3O4-wood dust blend for self-assembly applications
Authors: Kumar S.
Journal: Journal of Thermoplastic Composite Materials
DOI: 10.1177/0892705719857778
Published: July 2021
|
Type: Article
Keywords: and porosity | coercivity | hysteresis curve | magnetite powder | magnetization | PLA | PVC | resistivity | wood dust
Volume: 34
Pages: 929-951
ISSN/eISSN: 08927057/15307980
|
Citations: 50
Article #:
Source ID: 13690
Funding: Thapar Institute of Engineering and Technology
|
| 498 |
Title: Parameter estimation of proton exchange membrane fuel cell using a novel meta-heuristic algorithm
Authors: Singla M.K.
Journal: Environmental Science and Pollution Research
DOI: 10.1007/s11356-021-13097-0
Published: July 2021
|
Type: Article
Keywords: Benchmark function | BWO | Modeling | Non-parametric test | Parameter estimation | PEMFC
Volume: 28
Pages: 34511-34526
ISSN/eISSN: 09441344/16147499
|
Citations: 44
Article #:
Source ID: 23918
Funding:
|
| 499 |
Title: Fabricating In Situ Powdered Nickel–Alumina Metal Matrix Composites Through Microwave Heating Process: A Sustainable Approach
Authors: Singh S.
Journal: International Journal of Metalcasting
DOI: 10.1007/s40962-020-00536-w
Published: July 2021
|
Type: Article
Keywords: mechanical properties | microstructure | microwaves | powder castings | sliding | wear
Volume: 15
Pages: 969-982
ISSN/eISSN: 19395981/21633193
|
Citations: 28
Article #:
Source ID: 21100198509
Funding:
|
| 500 |
Title: Application of machine learning to include honking effect in vehicular traffic noise prediction
Authors: Singh D.
Journal: Applied Sciences Switzerland
DOI: 10.3390/app11136030
Published: 1 July 2021
|
Type: Article
Keywords: Honking | Machine learning | Modelling | Prediction | Road traffic noise
Volume: 11
Pages:
ISSN/eISSN: /20763417
|
Citations: 26
Article #: 6030
Source ID: 21100829268
Funding: Department of Mechanical Engineering, College of Engineering, Michigan State University
|
| 501 |
Title: A novel technique of harvesting cortical bone grafts during orthopaedic surgeries
Authors: Agarwal R.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-021-03064-8
Published: July 2021
|
Type: Article
Keywords: Autograft | Bone drilling | Chip morphology | Graft quality | Hollow drill tool
Volume: 43
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 23
Article #: 337
Source ID: 71359
Funding:
|
| 502 |
Title: Investigations on MWCNT Embedded Carbon/Epoxy Composite Joints Subjected to Hygrothermal Aging under Bolt Preloads
Authors: Kumar M.
Journal: Fibers and Polymers
DOI: 10.1007/s12221-021-0834-z
Published: July 2021
|
Type: Article
Keywords: Bolt preloads | Carbon fiber | Mechanical joints | Ultimate failure loads | Water absorption
Volume: 22
Pages: 1957-1975
ISSN/eISSN: 12299197/18750052
|
Citations: 15
Article #:
Source ID: 144862
Funding: Bhabha Atomic Research Centre
|
| 503 |
Title: Numerical implementation of drop spin and tilt method for five-axis tool positioning for tensor product surfaces
Authors: Sharma S.K.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-021-07137-9
Published: July 2021
|
Type: Article
Keywords: 5-axis machining | Bézier surface | CNC machining | DTM | Multipoint machining
Volume: 115
Pages: 2001-2016
ISSN/eISSN: 02683768/14333015
|
Citations: 2
Article #:
Source ID: 20428
Funding: Natural Sciences and Engineering Research Council of Canada
|
| 504 |
Title: Addition of compatibilized nanoclay and UHMWPE fibers to epoxy based GFRPs for improved mechanical properties
Authors: Shelly D.
Journal: Composites Part A Applied Science and Manufacturing
DOI: 10.1016/j.compositesa.2021.106371
Published: June 2021
|
Type: Article
Keywords: A: Polymer-matrix composites (PMCs) | B: Impact behaviour | D: Mechanical testing | E: Surface treatments
Volume: 145
Pages:
ISSN/eISSN: 1359835X/
|
Citations: 42
Article #: 106371
Source ID: 20540
Funding:
|
| 505 |
Title: Effect of Pre and Post Tempering on Hole Quality of Float Glass Specimen: for Rotary Ultrasonic and Conventional Drilling
Authors: Sharma A.
Journal: Silicon
DOI: 10.1007/s12633-020-00597-w
Published: June 2021
|
Type: Article
Keywords: Entrance chipping | Float glass | Radial chip distance | Rotary ultrasonic drilling | Tempering
Volume: 13
Pages: 2029-2039
ISSN/eISSN: 1876990X/18769918
|
Citations: 26
Article #:
Source ID: 19400158637
Funding:
|
| 506 |
Title: Experimental Study of Domestic Refrigerator Performance Improvement with Evaporative Condenser
Authors: Khalsa K.P.S.
Journal: International Journal of Air Conditioning and Refrigeration
DOI: 10.1142/S2010132521500152
Published: June 2021
|
Type: Article
Keywords: Domestic refrigerator | energy consumption | evaporative condenser | PVC coating
Volume: 29
Pages:
ISSN/eISSN: 20101325/20101333
|
Citations: 3
Article #: 2150015
Source ID: 21100429738
Funding:
|
| 507 |
Title: A review paper on downtime corrosion in boilers during lockdown due to COVID-19 in India
Authors: Bhagria B.K.
Journal: Aip Conference Proceedings
DOI: 10.1063/5.0049952
Published: 13 May 2021
|
Type: Conference Paper
Keywords: Boilers | Corrosion | Covid-19
Volume: 2341
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 2
Article #: 0049952
Source ID: 26916
Funding:
|
| 508 |
Title: Present scenario of hot corrosion studies performed with ferritic steel
Authors: Bhagria B.K.
Journal: Aip Conference Proceedings
DOI: 10.1063/5.0049955
Published: 13 May 2021
|
Type: Conference Paper
Keywords: Hot corrosion | HVOF | T91
Volume: 2341
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 2
Article #: 0049955
Source ID: 26916
Funding:
|
| 509 |
Title: Performance analysis of bare SS-304 using silt of size 350-450?μm at varying speed and at particular silt concentration
Authors: Kumar R.
Journal: Aip Conference Proceedings
DOI: 10.1063/5.0050223
Published: 13 May 2021
|
Type: Conference Paper
Keywords:
Volume: 2341
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 1
Article #: 0050223
Source ID: 26916
Funding:
|
| 510 |
Title: Comparative statement for diametric delamination in drilling of cortical bone with conventional and ultrasonic assisted drilling techniques
Authors: Singh G.
Journal: Journal of Orthopaedics
DOI: 10.1016/j.jor.2021.03.017
Published: 1 May 2021
|
Type: Article
Keywords: Bone drilling | Bovine | Coordinate measuring machine | Delamination | Ultrasonic assisted drilling
Volume: 25
Pages: 53-58
ISSN/eISSN: /0972978X
|
Citations: 34
Article #:
Source ID: 21100256976
Funding:
|
| 511 |
Title: Acoustic Emission Monitoring of RC Beams Corroded to Different Levels Under Flexural Loading
Authors: Garhwal S.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-020-04930-8
Published: May 2021
|
Type: Article
Keywords: AE hits | Corrosion | Cracking | Deflection | Event plots | Flexural
Volume: 46
Pages: 4319-4335
ISSN/eISSN: 2193567X/21914281
|
Citations: 15
Article #:
Source ID: 13951
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 512 |
Title: Wear behavior of microwave-processed Ni-WC8Co-based functionally graded materials
Authors: Kaushal S.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/1464420720988119
Published: May 2021
|
Type: Article
Keywords: Functionally gradient materials | microwave cladding | tribological wear
Volume: 235
Pages: 1036-1045
ISSN/eISSN: 14644207/20413076
|
Citations: 14
Article #:
Source ID: 20971
Funding:
|
| 513 |
Title: Finite Element Analysis and Dynamic Response of Graphene-Based Nanocomposite: For Low Velocity Impacts Applications
Authors: Nauriyal S.
Journal: Strength of Materials
DOI: 10.1007/s11223-021-00312-z
Published: May 2021
|
Type: Article
Keywords: composite | deformation | drop testing | fracture stresses | graphene | simulation
Volume: 53
Pages: 511-525
ISSN/eISSN: 00392316/15739325
|
Citations: 1
Article #:
Source ID: 17968
Funding:
|
| 514 |
Title: Corrigendum to “Design and modelling of a self-dispersing twisted pipe to mitigate settling in coal water suspension” [Adv. Powder Technol. 32(2) (2021) 317–336] (Advanced Powder Technology (2021) 32(2) (317–336), (S0921883120305513), (10.1016/j.apt.2020.12.012))
Authors: Singh H.
Journal: Advanced Powder Technology
DOI: 10.1016/j.apt.2021.02.038
Published: May 2021
|
Type: Erratum
Keywords:
Volume: 32
Pages: 1819-1820
ISSN/eISSN: 09218831/15685527
|
Citations: 0
Article #:
Source ID: 16325
Funding:
|
| 515 |
Title: Hydrogen fuel and fuel cell technology for cleaner future: a review
Authors: Singla M.K.
Journal: Environmental Science and Pollution Research
DOI: 10.1007/s11356-020-12231-8
Published: April 2021
|
Type: Review
Keywords: Energy | Environmental impacts | Fuel-cell applications | Hydrogen | Hydrogen storage
Volume: 28
Pages: 15607-15626
ISSN/eISSN: 09441344/16147499
|
Citations: 401
Article #:
Source ID: 23918
Funding:
|
| 516 |
Title: Field-synchronized Digital Twin framework for production scheduling with uncertainty
Authors: Negri E.
Journal: Journal of Intelligent Manufacturing
DOI: 10.1007/s10845-020-01685-9
Published: April 2021
|
Type: Article
Keywords: Digital Twin | Equipment health | Fault detection | FSSP | PHM | Robust scheduling | Simheuristics
Volume: 32
Pages: 1207-1228
ISSN/eISSN: 09565515/15728145
|
Citations: 132
Article #:
Source ID: 24363
Funding: University of Cincinnati
|
| 517 |
Title: Finite element simulation and integration of CEM43 °C and Arrhenius Models for ultrasonic-assisted skull bone grinding: A thermal dose model
Authors: Babbar A.
Journal: Medical Engineering and Physics
DOI: 10.1016/j.medengphy.2021.01.008
Published: April 2021
|
Type: Article
Keywords: Bone grinding | CEM43 °C | Infrared thermography | Necrosis | Simulation
Volume: 90
Pages: 9-22
ISSN/eISSN: 13504533/18734030
|
Citations: 36
Article #:
Source ID: 17817
Funding: All-India Institute of Medical Sciences
|
| 518 |
Title: Fabrication of Kevlar®-reinforced ultra-high molecular weight polyethylene composite through microwave-assisted compression molding for body armor applications
Authors: Guleria T.
Journal: Journal of Reinforced Plastics and Composites
DOI: 10.1177/0731684420959449
Published: April 2021
|
Type: Article
Keywords: composites | Kevlar® | microwave | Ultra-high molecular weight polyethylene
Volume: 40
Pages: 307-320
ISSN/eISSN: 07316844/15307964
|
Citations: 28
Article #:
Source ID: 21185
Funding:
|
| 519 |
Title: Histological evaluation of thermal damage to Osteocytes: A comparative study of conventional and ultrasonic-assisted bone grinding
Authors: Babbar A.
Journal: Medical Engineering and Physics
DOI: 10.1016/j.medengphy.2021.01.009
Published: April 2021
|
Type: Article
Keywords: Bone grinding | Cell death | Histopathology | Statistical analysis | Temperature | Ultrasonic
Volume: 90
Pages: 1-8
ISSN/eISSN: 13504533/18734030
|
Citations: 27
Article #:
Source ID: 17817
Funding: All-India Institute of Medical Sciences
|
| 520 |
Title: On Processing and Characterization of Cu–Mo-Based Castings Through Microwave Heating
Authors: Kaushal S.
Journal: International Journal of Metalcasting
DOI: 10.1007/s40962-020-00481-8
Published: April 2021
|
Type: Article
Keywords: composite casting | electrical resistivity | microhardness | microwave
Volume: 15
Pages: 530-537
ISSN/eISSN: 19395981/21633193
|
Citations: 21
Article #:
Source ID: 21100198509
Funding:
|
| 521 |
Title: Influence of microwave heating on metallurgical and mechanical properties of Ni-40Cr3C2 composite clads in the context of cavitation erosion resistance characteristics
Authors: Mago J.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406220940348
Published: April 2021
|
Type: Article
Keywords: cavitation erosion | characterization | Composite clad | flexural strength | fractographic analysis | fracture toughness | Vickers microhardness
Volume: 235
Pages: 1258-1276
ISSN/eISSN: 09544062/20412983
|
Citations: 16
Article #:
Source ID: 20407
Funding: Science and Engineering Research Board
|
| 522 |
Title: Behavior of Mechanical Joints Prepared from EB Cured CFRP Nanocomposites Subjected to Hygrothermal Aging Under Bolt Preloads
Authors: Kumar M.
Journal: Applied Composite Materials
DOI: 10.1007/s10443-020-09864-w
Published: April 2021
|
Type: Article
Keywords: Bolted joints | Electron beam curing | Failure loads | Fiber reinforced composites | Thermal curing | Water absorption
Volume: 28
Pages: 271-296
ISSN/eISSN: 0929189X/15734897
|
Citations: 16
Article #:
Source ID: 20498
Funding: Bhabha Atomic Research Centre
|
| 523 |
Title: Robust stabilization control of a spatial inverted pendulum using integral sliding mode controller
Authors: Chawla I.
Journal: International Journal of Nonlinear Sciences and Numerical Simulation
DOI: 10.1515/ijnsns-2018-0029
Published: 1 April 2021
|
Type: Article
Keywords: integral sliding mode controller | reachability | robustness | spatial inverted pendulum | stabilization
Volume: 22
Pages: 183-195
ISSN/eISSN: 15651339/
|
Citations: 11
Article #:
Source ID: 23247
Funding: Thapar Institute of Engineering and Technology
|
| 524 |
Title: Correction to: Hydrogen fuel and fuel cell technology for cleaner future: a review (Environmental Science and Pollution Research, (2021), 28, 13, (15607-15626), 10.1007/s11356-020-12231-8)
Authors: Singla M.K.
Journal: Environmental Science and Pollution Research
DOI: 10.1007/s11356-021-13191-3
Published: April 2021
|
Type: Erratum
Keywords:
Volume: 28
Pages: 19536
ISSN/eISSN: 09441344/16147499
|
Citations: 9
Article #:
Source ID: 23918
Funding:
|
| 525 |
Title: A couple stress model in non-polynomial framework to examine structural responses of laminated composite micro-plates: An analytical solution
Authors: Joshan Y.S.
Journal: Composite Structures
DOI: 10.1016/j.compstruct.2020.113533
Published: 1 April 2021
|
Type: Article
Keywords: Bending | Buckling | Composite micro-plates | Couple stress theory | Free vibration | Navier solution | Non-polynomial plate theories
Volume: 261
Pages:
ISSN/eISSN: 02638223/
|
Citations: 9
Article #: 113533
Source ID: 15063
Funding:
|
| 526 |
Title: Drive-train selection criteria for n-dof manipulators: Basis for modular serial robots library
Authors: Singla E.
Journal: International Journal of Nonlinear Sciences and Numerical Simulation
DOI: 10.1515/ijnsns-2017-0270
Published: 1 April 2021
|
Type: Article
Keywords: drive-train selection | optimal modular division | reconfigurable manipulators | redundant manipulators
Volume: 22
Pages: 169-181
ISSN/eISSN: 15651339/
|
Citations: 2
Article #:
Source ID: 23247
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 527 |
Title: Assessment of heat generation and its effect during cortical bone drilling using infrared camera and histology
Authors: Singh G.
Journal: Indian Journal of Engineering and Materials Sciences
DOI:
Published: April 2021
|
Type: Article
Keywords: Bone | Bone drilling | Heat generation | Histopathology | Osteonecrosis | Thermal imaging
Volume: 28
Pages: 182-188
ISSN/eISSN: 09714588/09751017
|
Citations: 1
Article #:
Source ID: 29812
Funding:
|
| 528 |
Title: Graphene for hydrogen energy storage - A comparative study on GO and rGO employed in a modified reversible PEM fuel cell
Authors: Jindal H.
Journal: International Journal of Energy Research
DOI: 10.1002/er.6202
Published: 25 March 2021
|
Type: Article
Keywords: chemical adsorption | energy storage | graphene oxide | physical adsorption | reduced graphene oxide | solid-state hydrogen
Volume: 45
Pages: 5815-5826
ISSN/eISSN: 0363907X/1099114X
|
Citations: 26
Article #:
Source ID: 26676
Funding:
|
| 529 |
Title: Non-destructive evaluation of steel and gfrp reinforced beams using ae and dic techniques
Authors: Sharma G.
Journal: Structural Engineering and Mechanics
DOI: 10.12989/sem.2021.77.5.637
Published: 10 March 2021
|
Type: Article
Keywords: Acoustic emission: Ae hits: Flexure: Image correlation | Strains: Cracks
Volume: 77
Pages: 637-650
ISSN/eISSN: 12254568/15986217
|
Citations: 6
Article #:
Source ID: 22062
Funding:
|
| 530 |
Title: Real-Time Stabilization Control of a Rotary Inverted Pendulum Using LQR-Based Sliding Mode Controller
Authors: Chawla I.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-020-05161-7
Published: March 2021
|
Type: Article
Keywords: Inverted pendulum | LQR controller | LQR-based sliding mode controller | Robust controller | Sliding mode controller | Stabilization | Underactuated systems
Volume: 46
Pages: 2589-2596
ISSN/eISSN: 2193567X/21914281
|
Citations: 33
Article #:
Source ID: 13951
Funding:
|
| 531 |
Title: Parametric optimization and analysis of cavitation erosion behavior of Ni-based + 10WC microwave processed composite clad using Taguchi approach
Authors: Bansal S.
Journal: Surface Topography Metrology and Properties
DOI: 10.1088/2051-672X/abda94
Published: March 2021
|
Type: Article
Keywords: Cavitation erosion | Composite clad | Fractographic analysis | Microhardness | Microstructure | Microwaves | Test parameters
Volume: 9
Pages:
ISSN/eISSN: /2051672X
|
Citations: 23
Article #: 015011
Source ID: 21100469364
Funding: Science and Engineering Research Board
|
| 532 |
Title: Processing routes, resulting microstructures, and strain rate dependent deformation behaviour of advanced high strength steels for automotive applications
Authors: Nanda T.
Journal: Archives of Civil and Mechanical Engineering
DOI: 10.1007/s43452-020-00149-4
Published: March 2021
|
Type: Review
Keywords: AHSS | DP steels | Strain rate | Tensile properties | TRIP steels | TWIP steels
Volume: 21
Pages:
ISSN/eISSN: 16449665/
|
Citations: 21
Article #: 7
Source ID: 14000156254
Funding:
|
| 533 |
Title: Investigation of Optimized Parameters for Magnetorheological Finishing the Internal Surface of the Cast-Iron Cylindrical Molds
Authors: Paswan S.K.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-020-05018-z
Published: March 2021
|
Type: Article
Keywords: Cast-iron | Cylindrical molds | Magnetorheological polishing fluid | Response surface methodology | Rotary magnetorheological honing | Surface roughness
Volume: 46
Pages: 2147-2164
ISSN/eISSN: 2193567X/21914281
|
Citations: 10
Article #:
Source ID: 13951
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 534 |
Title: Metallurgical and wear study of MWCNT-reinforced h-AMMC fabricated through microwave hybrid sintering
Authors: Kumar R.
Journal: International Journal of Materials Research
DOI: 10.3139/146.111884
Published: 1 March 2021
|
Type: Article
Keywords: Carbon nanotube | Hybrid aluminium metal matrix composite | Microwave | Sintering | Wear
Volume: 112
Pages: 198-202
ISSN/eISSN: 18625282/
|
Citations: 2
Article #:
Source ID: 4700152261
Funding:
|
| 535 |
Title: Development of an adaptive neuro fuzzy inference system based vehicular traffic noise prediction model
Authors: Singh D.
Journal: Journal of Ambient Intelligence and Humanized Computing
DOI: 10.1007/s12652-020-02431-y
Published: February 2021
|
Type: Article
Keywords: Fuzzy inference system | Neural networks | Prediction modelling | Soft-computing | Traffic noise
Volume: 12
Pages: 2685-2701
ISSN/eISSN: 18685137/18685145
|
Citations: 28
Article #:
Source ID: 19400158593
Funding: Department of Mechanical Engineering, College of Engineering, Michigan State University
|
| 536 |
Title: Improved performance of a nanorefrigerant-based vapor compression refrigeration system: A new alternative
Authors: Kundan L.
Journal: Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy
DOI: 10.1177/0957650920904553
Published: February 2021
|
Type: Article
Keywords: Aluminum oxide | coefficient of performance | heat transfer characteristics | nanorefrigerant | volume fraction of nanoparticles
Volume: 235
Pages: 106-123
ISSN/eISSN: 09576509/20412967
|
Citations: 23
Article #:
Source ID: 20405
Funding:
|
| 537 |
Title: Cavitation erosion behavior of microwave-processed Ni–40Cr3C2 composite clads: A parametric investigation using ultrasonic apparatus
Authors: Mago J.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/1464420720961122
Published: February 2021
|
Type: Article
Keywords: Cavitation erosion | characterization | composite clad | microwave cladding | surface roughness | test parameters
Volume: 235
Pages: 265-292
ISSN/eISSN: 14644207/20413076
|
Citations: 23
Article #:
Source ID: 20971
Funding: Science and Engineering Research Board
|
| 538 |
Title: Monitoring the flexural performance of GFRP repaired corroded reinforced concrete beams using passive acoustic emission technique
Authors: Garhwal S.
Journal: Structural Concrete
DOI: 10.1002/suco.202000247
Published: February 2021
|
Type: Article
Keywords: acoustic emission | AE hits | corrosion | deflection | flexural strength | GFRP | repair
Volume: 22
Pages: 198-214
ISSN/eISSN: 14644177/17517648
|
Citations: 15
Article #:
Source ID: 17442
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 539 |
Title: Design and modelling of a self-dispersing twisted pipe to mitigate settling in coal water suspension
Authors: Singh H.
Journal: Advanced Powder Technology
DOI: 10.1016/j.apt.2020.12.012
Published: February 2021
|
Type: Article
Keywords: Coal water suspension | Computational Fluid Dynamics | Headloss | Mixing index | Settling characteristics | Specific energy consumption | Twisted pipe
Volume: 32
Pages: 317-336
ISSN/eISSN: 09218831/15685527
|
Citations: 11
Article #:
Source ID: 16325
Funding:
|
| 540 |
Title: Magnetorheological finishing of copper cylindrical roller for its improved performance in printing machine
Authors: Singh M.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/0954408920945232
Published: February 2021
|
Type: Article
Keywords: central composite design | copper cylindrical roller | geometrical dimensions | magnetic field | Magnetorheological finishing | surface roughness
Volume: 235
Pages: 103-115
ISSN/eISSN: 09544089/20413009
|
Citations: 10
Article #:
Source ID: 20408
Funding:
|
| 541 |
Title: Lubricated tribology of hybrid AMMC–steel sliding contact: A comparative investigation between fully formulated commercial engine oils and surfactant functionalized MWCNT–base oil formulation
Authors: Singh H.
Journal: Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology
DOI: 10.1177/1350650119901221
Published: February 2021
|
Type: Article
Keywords: h-AMMC | Lubricant | multiwalled carbon nanotube | surfactant | tribology
Volume: 235
Pages: 315-328
ISSN/eISSN: 13506501/2041305X
|
Citations: 2
Article #:
Source ID: 20410
Funding:
|
| 542 |
Title: The Comprehensive Review on machining of Inconel 718 superalloy
Authors: Shard A.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/1033/1/012069
Published: 18 January 2021
|
Type: Conference Paper
Keywords:
Volume: 1033
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 3
Article #: 012069
Source ID: 19700200831
Funding:
|
| 543 |
Title: Influence of two different range of sillimanite particle reinforcement on tribological characteristics of LM30 based composites under elevated temperature conditions
Authors: Sharma S.
Journal: Materials Chemistry and Physics
DOI: 10.1016/j.matchemphys.2020.123988
Published: 15 January 2021
|
Type: Article
Keywords: Friction coefficient | Sillimanite | Thermal expansion | Wear rate
Volume: 258
Pages:
ISSN/eISSN: 02540584/
|
Citations: 23
Article #: 123988
Source ID: 17800
Funding: Council of Scientific and Industrial Research, India
|
| 544 |
Title: A systematic review of machine learning algorithms for prognostics and health management of rolling element bearings: fundamentals, concepts and applications
Authors: Singh J.
Journal: Measurement Science and Technology
DOI: 10.1088/1361-6501/ab8df9
Published: January 2021
|
Type: Review
Keywords: Artificial intelligence | Deep learning | Fault diagnosis | Fault prognosis | Machine learning | Rolling element bearings
Volume: 32
Pages:
ISSN/eISSN: 09570233/13616501
|
Citations: 71
Article #: 012001
Source ID: 15526
Funding:
|
| 545 |
Title: Advancements in multi-scale filler reinforced epoxy nanocomposites for improved impact strength: A review
Authors: Nanda T.
Journal: Critical Reviews in Solid State and Materials Sciences
DOI: 10.1080/10408436.2020.1777934
Published: 2021
|
Type: Review
Keywords: elastomeric particles | Epoxy based GFRP | fiber/matrix interface | impact strength | surface treatments | thermoplastic fiber
Volume: 46
Pages: 281-329
ISSN/eISSN: 10408436/15476561
|
Citations: 58
Article #:
Source ID: 27476
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 546 |
Title: Effect of Drilling Techniques on Microcracks and Pull-Out Strength of Cortical Screw Fixed in Human Tibia: An In-Vitro Study
Authors: Singh R.P.
Journal: Annals of Biomedical Engineering
DOI: 10.1007/s10439-020-02565-2
Published: January 2021
|
Type: Article
Keywords: Bone | Bone drilling | Microcracks | Pull out strength | Rotary ultrasonic bone drilling
Volume: 49
Pages: 382-393
ISSN/eISSN: 00906964/15739686
|
Citations: 29
Article #:
Source ID: 27474
Funding:
|
| 547 |
Title: Experimental analysis of wear and multi-shape burr loading during neurosurgical bone grinding
Authors: Babbar A.
Journal: Journal of Materials Research and Technology
DOI: 10.1016/j.jmrt.2021.02.060
Published: 2021
|
Type: Article
Keywords: Bone grinding | Burr wear | Machining time | Porcine bone | Sonication
Volume: 12
Pages: 15-28
ISSN/eISSN: 22387854/
|
Citations: 29
Article #:
Source ID: 21100383742
Funding:
|
| 548 |
Title: Development of grinding wheel type magnetorheological finishing process for blind hole surfaces
Authors: Aggarwal A.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2020.1843666
Published: 2021
|
Type: Article
Keywords: blind | cylindrical | finishing | fluid | grinding | holes | Magnetorheological | polishing | roughness | surface | tool
Volume: 36
Pages: 457-478
ISSN/eISSN: 10426914/15322475
|
Citations: 22
Article #:
Source ID: 21054
Funding:
|
| 549 |
Title: Magnetorheological finishing of variable diametric external surface of the tapered cylindrical workpieces for functionality improvement
Authors: Singh M.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2020.10.074
Published: January 2021
|
Type: Article
Keywords: Magnetic field | Magnetorheological finishing | Surface roughness | Tapered cylindrical punch | Tapered glass manufacturing | Variable external cylindrical surface
Volume: 61
Pages: 153-172
ISSN/eISSN: 15266125/
|
Citations: 19
Article #:
Source ID: 27677
Funding:
|
| 550 |
Title: Effects of process parameters on surface roughness, dimensional accuracy and printing time in 3d printing
Authors: Jain R.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-5519-0_15
Published: 2021
|
Type: Conference Paper
Keywords: 3D printer | Infill density | Layer height | Printing speed | Printing time | Surface roughness
Volume:
Pages: 187-197
ISSN/eISSN: 21954356/21954364
|
Citations: 15
Article #:
Source ID: 21100431311
Funding:
|
| 551 |
Title: Microwave-assisted rapid upgrading of Indian high ash coal and its blending with untreated coal to improve the slurryability and rheological characteristics of blended slurry
Authors: Singh H.
Journal: International Journal of Coal Preparation and Utilization
DOI: 10.1080/19392699.2018.1515738
Published: 2021
|
Type: Article
Keywords: blending | Coal water slurry | microwave treatment | regression analysis | rheological characteristics | settling characteristics
Volume: 41
Pages: 711-727
ISSN/eISSN: 19392699/19392702
|
Citations: 13
Article #:
Source ID: 12400154727
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 552 |
Title: An investigation into pressure drop through bends in pneumatic conveying systems
Authors: Sharma A.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2019.1676348
Published: 2021
|
Type: Article
Keywords: bend diameter | bend loss | fine powders | Pneumatic conveying | R/D ratio
Volume: 39
Pages: 180-191
ISSN/eISSN: 02726351/15480046
|
Citations: 13
Article #:
Source ID: 13661
Funding:
|
| 553 |
Title: Improved Slurryability and Rheological Characteristics of High Ash Indian Coal by Hydrothermal Treatment
Authors: Singh H.
Journal: International Journal of Coal Preparation and Utilization
DOI: 10.1080/19392699.2018.1461624
Published: 2021
|
Type: Article
Keywords: Coal water suspension | hydrothermal treatment | particle size distribution | regression analysis | rheological characteristics | settling characteristics
Volume: 41
Pages: 203-215
ISSN/eISSN: 19392699/19392702
|
Citations: 10
Article #:
Source ID: 12400154727
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 554 |
Title: A Study and Novel AI/ML-Based Framework to Detect COVID-19 Virus Using Smartphone Embedded Sensors
Authors: Sharma M.
Journal: Sustainability Measures for Covid 19 Pandemic
DOI: 10.1007/978-981-16-3227-3_4
Published: 1 January 2021
|
Type: Book Chapter
Keywords: Corona virus | COVID-19 | Deep learning | Detection | Sensors | Smartphones
Volume:
Pages: 59-74
ISSN/eISSN: /
|
Citations: 10
Article #:
Source ID: 21101161726
Funding:
|
| 555 |
Title: 3D printed tensile and flexural prototypes of thermoplastic matrix reinforced with multi-materials: A statistical analysis
Authors: Kumar S.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2020.07.175
Published: 2021
|
Type: Conference Paper
Keywords: Cp and Cpk | Functionally graded | Fused deposition modelling | Multi material matrix | Process capability | Surface roughness profile
Volume: 44
Pages: 79-85
ISSN/eISSN: /22147853
|
Citations: 9
Article #:
Source ID: 21100370037
Funding:
|
| 556 |
Title: Design of 7 GHz Microstrip Patch Antenna for Satellite IoT- and IoE-Based Devices
Authors: Sharma M.
Journal: Lecture Notes in Electrical Engineering
DOI: 10.1007/978-981-15-8297-4_50
Published: 2021
|
Type: Conference Paper
Keywords: IoE | IoT | Microstrip patch antenna | Sattelite communication | SIoT
Volume: 701
Pages: 627-637
ISSN/eISSN: 18761100/18761119
|
Citations: 9
Article #:
Source ID: 19700186822
Funding:
|
| 557 |
Title: Influence of cutting force and drilling temperature on glass hole surface integrity during rotary ultrasonic drilling
Authors: Sharma A.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-5519-0_28
Published: 2021
|
Type: Conference Paper
Keywords: Float glass | Rotary ultrasonic machining | Surface roughness
Volume:
Pages: 369-378
ISSN/eISSN: 21954356/21954364
|
Citations: 8
Article #:
Source ID: 21100431311
Funding:
|
| 558 |
Title: An evaluation of testing and modeling procedure for solids friction factor for fluidized dense-phase pneumatic conveying of fine powders
Authors: Sharma K.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2019.1662527
Published: 2021
|
Type: Article
Keywords: back calculation method | Pneumatic conveying | solids friction factor | straight pipe data | two-layer model
Volume: 39
Pages: 62-73
ISSN/eISSN: 02726351/15480046
|
Citations: 7
Article #:
Source ID: 13661
Funding:
|
| 559 |
Title: INVESTIGATING the PERFORMANCE of NANOREFRIGERANT (R134a + CuO)-BASED VAPOR COMPRESSION CYCLE: A NEW SCOPE
Authors: Kaushik R.
Journal: Heat Transfer Research
DOI: 10.1615/HEATTRANSRES.2021036516
Published: 2021
|
Type: Article
Keywords: Cooling speed | Efficiency | Energy consumption | Nanorefrigerant | Performance | Vapor compression system
Volume: 52
Pages: 33-53
ISSN/eISSN: 10642285/
|
Citations: 5
Article #:
Source ID: 20381
Funding:
|
| 560 |
Title: Processing of Polymers and Their Composites: A Review
Authors: Singh J.
Journal: Encyclopedia of Materials Composites
DOI: 10.1016/B978-0-12-803581-8.11435-3
Published: 1 January 2021
|
Type: Book Chapter
Keywords: Composites | Polymers | Processing techniques | Thermoplastic | Thermoset
Volume: 1
Pages: 577-603
ISSN/eISSN: /
|
Citations: 4
Article #:
Source ID: 21101125149
Funding:
|
| 561 |
Title: Navigation model for four-wheel mobile robot: A bond graph and robot operating system approach
Authors: Singh R.
Journal: International Journal of Robotics and Automation
DOI: 10.2316/J.2021.206-206-0368
Published: 2021
|
Type: Article
Keywords: Autonomous navigation | Bond graph | Four-wheel mobile robot | Obstacle avoidance | ROS
Volume: 36
Pages: 283-291
ISSN/eISSN: 08268185/
|
Citations: 4
Article #:
Source ID: 25482
Funding:
|
| 562 |
Title: Performance of automated machine for different profiles in two-dimensional welding
Authors: Kumar V.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2020.1843665
Published: 2021
|
Type: Article
Keywords: Automatic | closed | experimentation | GMAW | hardness | opened | profile | SEM | simulation
Volume: 36
Pages: 435-447
ISSN/eISSN: 10426914/15322475
|
Citations: 4
Article #:
Source ID: 21054
Funding: Indian Institute of Technology Ropar
|
| 563 |
Title: Hot Cracking Susceptibility: An Effect of Solidification Modes of SS Consumables During Bimetallic Welds
Authors: Rathod D.W.
Journal: Lecture Notes on Multidisciplinary Industrial Engineering
DOI: 10.1007/978-981-15-4550-4_34
Published: 2021
|
Type: Book Chapter
Keywords:
Volume: Part F254
Pages: 537-547
ISSN/eISSN: 25225022/25225030
|
Citations: 4
Article #:
Source ID: 21101156896
Funding:
|
| 564 |
Title: PLA Composite Matrix as Functional Prototypes for Four Dimensional Applications
Authors: Kumar S.
Journal: Encyclopedia of Materials Composites
DOI: 10.1016/B978-0-12-803581-8.11595-4
Published: 1 January 2021
|
Type: Book Chapter
Keywords: 4D applications | Composite | PLA | Wood dust
Volume: 1
Pages: 1091-1100
ISSN/eISSN: /
|
Citations: 3
Article #:
Source ID: 21101125149
Funding:
|
| 565 |
Title: Internal Combustion Engine Exhaust Waste Heat Recovery Using Thermoelectric Generator Heat Exchanger
Authors: Noh N.A.S.M.
Journal: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
DOI: 10.37934/arfmts.82.2.1527
Published: 2021
|
Type: Article
Keywords: efficiency | internal combustion engine | Thermoelectric generator | waste heat recovery
Volume: 82
Pages: 15-27
ISSN/eISSN: 22897879/
|
Citations: 3
Article #:
Source ID: 21100853837
Funding: Universiti Teknologi MARA
|
| 566 |
Title: Experimental Analysis of Hydrocarbon Refrigerant and CuO Nano-Particles Based Vapour Compression System
Authors: Kaushik R.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-33-6029-7_8
Published: 2021
|
Type: Conference Paper
Keywords: Cooling speed | COP | Nano-refrigerant | Nanoparticles
Volume:
Pages: 81-92
ISSN/eISSN: 21954356/21954364
|
Citations: 1
Article #:
Source ID: 21100431311
Funding:
|
| 567 |
Title: On investigation of dimensional deviation for hybrid composite matrix of PLA
Authors: Kumar S.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-5151-2_10
Published: 2021
|
Type: Conference Paper
Keywords: Dimensional deviation | Electrical conductivity | Four-probe method | Hybrid magnetostrictive polymeric composite | Optimization
Volume:
Pages: 99-107
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 568 |
Title: Characterization and Optimization of Machining Parameters for High-Strength Steel
Authors: Garg G.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-16-0673-1_23
Published: 2021
|
Type: Conference Paper
Keywords: High-strength steel | Machining | Material removal rate | Surface roughness | Taguchi
Volume:
Pages: 297-307
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 569 |
Title: Specific Heat of Nanofluids—An Experimental Investigation
Authors: Anand T.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-16-0698-4_49
Published: 2021
|
Type: Conference Paper
Keywords: Heat transfer | Nanofluid | Nanoparticles | Particle size distribution | Temperature
Volume:
Pages: 453-462
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 570 |
Title: Surface Morphology and Metallurgical Studies on Gas-Assisted Laser Beam Hybrid Micromachined Steel
Authors: Singh S.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-5689-0_19
Published: 2021
|
Type: Book Chapter
Keywords: Gas pressure | Hole diameter | Hole taper length | Laser micro-drilling | Laser power
Volume:
Pages: 213-224
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 571 |
Title: Investigation of kerf characteristics using abrasive water jet cutting of floor tile: A preliminary study
Authors: Chand R.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-5519-0_14
Published: 2021
|
Type: Conference Paper
Keywords: Abrasive | Floor tile | Nozzle transverse speed | Water jet | Water pressure
Volume:
Pages: 177-185
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 572 |
Title: Design and fabrication of a socket jockey and its use in home automation
Authors: Jain R.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-8304-9_7
Published: 2021
|
Type: Conference Paper
Keywords: Arduino Uno | Internet of things | Rectifier circuit | Short message service | Wireless sensor networks
Volume:
Pages: 99-114
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 573 |
Title: 3-D Printer Robot for Civil Construction: A Bond Graph Approach
Authors: Khandelwal V.
Journal: Proceedings of the 8th International Conference on Signal Processing and Integrated Networks Spin 2021
DOI: 10.1109/SPIN52536.2021.9566091
Published: 2021
|
Type: Conference Paper
Keywords: 3-D building printing | bond graph | finite element method | mobile robot
Volume:
Pages: 169-174
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101080433
Funding:
|
| 574 |
Title: Bond Graph Based Modelling of Four-Cylinder In-Line Engine and Study of the Various Engine Characteristics Parameters
Authors: Singh R.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-5996-9_61
Published: 2021
|
Type: Conference Paper
Keywords: Bond graph | Engine dynamics | Four-cylinder in-line engine | Piston–cylinder model
Volume:
Pages: 795-805
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 575 |
Title: Response of a Layered Composite Beam Subjected to Static Loading Using Point Interpolation Meshless Technique
Authors: Shah K.S.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-4488-0_17
Published: 2021
|
Type: Conference Paper
Keywords: Higher-order beam theory | Laminated composite beam | Meshless method | Point interpolation method
Volume:
Pages: 189-199
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 576 |
Title: Dynamic Behaviour of Laminated Composite Beam Undergoing Moving Loads
Authors: Saxena L.B.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-4488-0_18
Published: 2021
|
Type: Conference Paper
Keywords: Dynamic magnification factor | Finite element method | Laminated composite beam | Midpoint rule with midpoint acceleration | Moving loads | Timoshenko beam theory
Volume:
Pages: 201-211
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 577 |
Title: Mechanical characterization of FDM filaments with PVDF matrix reinforced with Graphene and Barium Titanate
Authors: Farina I.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/999/1/012010
Published: 18 December 2020
|
Type: Conference Paper
Keywords:
Volume: 999
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 3
Article #: 012010
Source ID: 19700200831
Funding:
|
| 578 |
Title: Dynamic bayesian network decision model for improving fault detection procedure
Authors: Chatti N.
Journal: IEEE International Conference on Industrial Engineering and Engineering Management
DOI: 10.1109/IEEM45057.2020.9309982
Published: 14 December 2020
|
Type: Conference Paper
Keywords: Dynamic Bayesian Network | Fault detection | Hybrid Bond Graph
Volume: 2020-December
Pages: 1006-1011
ISSN/eISSN: 21573611/2157362X
|
Citations: 5
Article #: 9309982
Source ID: 21100197517
Funding:
|
| 579 |
Title: On-sun testing of volumetric absorption based concentrating solar collector employing carbon soot nanoparticles laden fluid
Authors: Singh N.
Journal: Sustainable Energy Technologies and Assessments
DOI: 10.1016/j.seta.2020.100868
Published: December 2020
|
Type: Article
Keywords: Nanofluid stability | On-sun testing | Optical properties | Volumetric absorption
Volume: 42
Pages:
ISSN/eISSN: 22131388/
|
Citations: 22
Article #: 100868
Source ID: 21100239262
Funding: Department of Mechanical Engineering, College of Engineering, Michigan State University
|
| 580 |
Title: Theoretical investigations into magnetorheological finishing of external cylindrical surfaces for improved performance
Authors: Singh M.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406220931550
Published: 1 December 2020
|
Type: Article
Keywords: external cylindrical surfaces | magnetic flux density | Magnetorheological finishing | rotating tool core tip | surface roughness | theoretical model
Volume: 234
Pages: 4872-4892
ISSN/eISSN: 09544062/20412983
|
Citations: 12
Article #:
Source ID: 20407
Funding:
|
| 581 |
Title: Evaluation of corrosion mechanism for tungsten carbide coating exposed in actual boiler environment
Authors: Saroop V.
Journal: Engineering Failure Analysis
DOI: 10.1016/j.engfailanal.2020.104905
Published: December 2020
|
Type: Article
Keywords: Corrosion | D-gun | WC-Co coating
Volume: 118
Pages:
ISSN/eISSN: 13506307/
|
Citations: 9
Article #: 104905
Source ID: 20593
Funding:
|
| 582 |
Title: ANFIS based system identification of underactuated systems
Authors: Chawla I.
Journal: International Journal of Nonlinear Sciences and Numerical Simulation
DOI: 10.1515/ijnsns-2018-0005
Published: 1 December 2020
|
Type: Article
Keywords: ANFIS | Inverted pendulum | Nonlinear system | SIMO | System identification | Underactuated
Volume: 21
Pages: 649-660
ISSN/eISSN: 15651339/
|
Citations: 4
Article #:
Source ID: 23247
Funding:
|
| 583 |
Title: Call for Special Issue Papers: Internet of Things Data Visualization for Business Intelligence
Authors: Kumar N.
Journal: Big Data
DOI: 10.1089/big.2020.29036.cfp4
Published: 1 December 2020
|
Type: Article
Keywords:
Volume: 8
Pages: 540-541
ISSN/eISSN: /2167647X
|
Citations: 1
Article #:
Source ID: 21100780696
Funding:
|
| 584 |
Title: PI Controller-Based Walking Mechanism of Quadruped Robot on a Side Ramp Path
Authors: Singh R.
Journal: 2020 IEEE 15th International Conference on Industrial and Information Systems Iciis 2020 Proceedings
DOI: 10.1109/ICIIS51140.2020.9342685
Published: 26 November 2020
|
Type: Conference Paper
Keywords: bond graph | PI controller | quadruped robot | simmechanics | trot gait
Volume:
Pages: 97-102
ISSN/eISSN: /
|
Citations: 1
Article #: 9342685
Source ID: 21101038718
Funding:
|
| 585 |
Title: Modeling of solid-liquid flow inside conical diverging sections using computational fluid dynamics approach
Authors: Singh H.
Journal: International Journal of Mechanical Sciences
DOI: 10.1016/j.ijmecsci.2020.105909
Published: 15 November 2020
|
Type: Article
Keywords: 3D computational fluid dynamics modelling | Coal water slurries | Conical diverging section | Flow separation | Flow visualization | Head-loss characteristics
Volume: 186
Pages:
ISSN/eISSN: 00207403/
|
Citations: 18
Article #: 105909
Source ID: 50170
Funding:
|
| 586 |
Title: Comprehensive modeling, simulation and analysis of nanoparticles laden volumetric absorption based concentrating solar thermal systems in laminar flow regime
Authors: Singh A.
Journal: Solar Energy
DOI: 10.1016/j.solener.2020.08.088
Published: 15 November 2020
|
Type: Article
Keywords: Carbon nanoparticles | Coupled transport phenomena | Energy conversion efficiency | Solar thermal systems | Volumetric absorption
Volume: 211
Pages: 31-54
ISSN/eISSN: 0038092X/
|
Citations: 10
Article #:
Source ID: 13333
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 587 |
Title: Analysis of three-dimensional bending deformations and failure of wet and dry laminates
Authors: Jain D.
Journal: Composite Structures
DOI: 10.1016/j.compstruct.2020.112687
Published: 15 November 2020
|
Type: Article
Keywords: 3-Dimensional deformations | Delamination | Hygro-mechanical stresses | Moisture diffusion
Volume: 252
Pages:
ISSN/eISSN: 02638223/
|
Citations: 8
Article #: 112687
Source ID: 15063
Funding: Office of Naval Research
|
| 588 |
Title: Intelligent Maintenance Systems and Predictive Manufacturing
Authors: Lee J.
Journal: Journal of Manufacturing Science and Engineering Transactions of the ASME
DOI: 10.1115/1.4047856
Published: 1 November 2020
|
Type: Article
Keywords: and diagnostics | big data | blockchain technology | cloud computing | cyber-physical system | digital twin | E-manufacturing | fog computing | industrial AI | industry 4.0 | inspection and quality control | Intelligent maintenance systems | Internet of things | machine tool dynamics | maintenance scheduling | monitoring | plant engineering and maintenance | prognostics and health management | sensing | sensors | stream of variations | system bottleneck
Volume: 142
Pages:
ISSN/eISSN: 10871357/15288935
|
Citations: 149
Article #: 110805
Source ID: 20966
Funding:
|
| 589 |
Title: Erosive wear behaviour of HVOF-sprayed Ni-20Cr2O3 coating on pipeline materials
Authors: Bansal A.
Journal: International Journal of Refractory Metals and Hard Materials
DOI: 10.1016/j.ijrmhm.2020.105332
Published: November 2020
|
Type: Article
Keywords: Bottom ash | HVOF-spray coating | Pipeline steels | Slurry erosion
Volume: 92
Pages:
ISSN/eISSN: 02634368/22133917
|
Citations: 48
Article #: 105332
Source ID: 12219
Funding:
|
| 590 |
Title: Comparison of Different Hydrophobic Treatments for the Durability Improvement of Palmyra Natural Fiber Composites under Hydrothermal Ageing Environments
Authors: Jain D.
Journal: Journal of Natural Fibers
DOI: 10.1080/15440478.2019.1588828
Published: 1 November 2020
|
Type: Article
Keywords: Alkali treatment | coefficient of moisture diffusivity | fiber pretreatment | Fick’s Law | hydrothermal ageing | Microstructural investigations | Palmyra natural fibers | stearic acid treatment
Volume: 17
Pages: 1668-1682
ISSN/eISSN: 15440478/1544046X
|
Citations: 15
Article #:
Source ID: 130154
Funding:
|
| 591 |
Title: Performance of Mechanical Joints Prepared from Carbon-Fiber-Reinforced Polymer Nanocomposites under Accelerated Environmental Aging
Authors: Kumar M.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-020-05216-8
Published: November 2020
|
Type: Article
Keywords: bolt preloads | carbon fiber | carbon nanotubes | failure loads | humidity | mechanical joints | ultraviolet radiations
Volume: 29
Pages: 7511-7525
ISSN/eISSN: 10599495/15441024
|
Citations: 14
Article #:
Source ID: 21160
Funding: Bhabha Atomic Research Centre
|
| 592 |
Title: Head Loss Investigations Inside 90° Pipe Bend for Conveying Of Fine Coal–Water Slurry Suspension
Authors: Singh J.P.
Journal: International Journal of Coal Preparation and Utilization
DOI: 10.1080/19392699.2017.1415892
Published: 1 November 2020
|
Type: Article
Keywords: Coal | coal–water slurry | head loss | pipe bend | settling velocity | slurry pipeline
Volume: 40
Pages: 790-806
ISSN/eISSN: 19392699/19392702
|
Citations: 13
Article #:
Source ID: 12400154727
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 593 |
Title: A novel comparative approach on inverse heat transfer analysis of an experimental setup of an extended surface
Authors: Singhal M.
Journal: International Communications in Heat and Mass Transfer
DOI: 10.1016/j.icheatmasstransfer.2020.104822
Published: November 2020
|
Type: Article
Keywords: 2010 MSC: 80 M50, 80–05, 35R30, 80A23, 47A52. | Experimental analysis | Extended surface | Inverse analysis | Optimization | Regularization | Sensitivity analysis
Volume: 118
Pages:
ISSN/eISSN: 07351933/
|
Citations: 10
Article #: 104822
Source ID: 20422
Funding: Science and Engineering Research Board
|
| 594 |
Title: Multipoint tool positioning of a toroidal end mill for five-axis machining of generalized tensor product Bézier surfaces
Authors: Duvedi R.K.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-020-06006-1
Published: 1 November 2020
|
Type: Article
Keywords: Bézier surface | CNC machining | Five-axis machining | Multi-point machining
Volume: 111
Pages: 495-503
ISSN/eISSN: 02683768/14333015
|
Citations: 7
Article #:
Source ID: 20428
Funding:
|
| 595 |
Title: Evaluation of corrosion inhibition and self healing capabilities of nanoclay and tung oil microencapsulated epoxy coatings on rebars in concrete
Authors: Sharma N.
Journal: Construction and Building Materials
DOI: 10.1016/j.conbuildmat.2020.120278
Published: 30 October 2020
|
Type: Article
Keywords: Corrosion | Corrosion current | Guided waves | Nano-clay | Self-healing | Tung-oil microcapsules
Volume: 259
Pages:
ISSN/eISSN: 09500618/
|
Citations: 61
Article #: 120278
Source ID: 24443
Funding: Thapar Institute of Engineering and Technology
|
| 596 |
Title: Magnetorheological finishing of UHMWPE acetabular cup surface and its performance analysis
Authors: Arora K.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2020.1784928
Published: 25 October 2020
|
Type: Article
Keywords: acetabular cup | circularity | field | finishing | fluids | magnetic | Magnetorheological | morphology | polishing | roughness | UHMWPE
Volume: 35
Pages: 1631-1649
ISSN/eISSN: 10426914/15322475
|
Citations: 33
Article #:
Source ID: 21054
Funding:
|
| 597 |
Title: Preliminary investigations of rotary ultrasonic neurosurgical bone grinding using Grey-Taguchi optimization methodology
Authors: Babbar A.
Journal: Grey Systems
DOI: 10.1108/GS-11-2019-0054
Published: 16 October 2020
|
Type: Article
Keywords: Bone | Grinding | Optimization | Temperature | Thermal necrosis
Volume: 10
Pages: 479-493
ISSN/eISSN: 20439377/20439385
|
Citations: 21
Article #:
Source ID: 21101061831
Funding: All-India Institute of Medical Sciences
|
| 598 |
Title: A deep learning approach to detect Covid-19 coronavirus with X-Ray images
Authors: Jain G.
Journal: Biocybernetics and Biomedical Engineering
DOI: 10.1016/j.bbe.2020.08.008
Published: October - December 2020
|
Type: Article
Keywords: Computer-aided diagnosis | Coronavirus detection | Covid-19 | Deep learning | Pneumonia | X-ray
Volume: 40
Pages: 1391-1405
ISSN/eISSN: 02085216/
|
Citations: 258
Article #:
Source ID: 19400158663
Funding:
|
| 599 |
Title: Dry sliding wear performance of ni-sic composites developed through an in situ microwave casting process
Authors: Singh S.
Journal: Journal of Tribology
DOI: 10.1115/1.4047032
Published: October 2020
|
Type: Article
Keywords: Abrasion | Hardness | Metal matrix composite | Microstructure | Microwave heating | Powder processing | Sliding | Wear
Volume: 142
Pages:
ISSN/eISSN: 07424787/15288897
|
Citations: 15
Article #: 101704
Source ID: 17014
Funding:
|
| 600 |
Title: The effect of radiation curing on mechanical joints prepared from carbon nanotubes added carbon/epoxy laminates
Authors: Kumar M.
Journal: Polymer Composites
DOI: 10.1002/pc.25709
Published: 1 October 2020
|
Type: Article
Keywords: carbon fiber | electron beam curing | failure load | finite element analysis | multiwalled carbon nanotube | pin joints
Volume: 41
Pages: 4260-4276
ISSN/eISSN: 02728397/15480569
|
Citations: 9
Article #:
Source ID: 14433
Funding: Bhabha Atomic Research Centre
|
| 601 |
Title: Call for Special Issue Papers: Internet of Things Data Visualization for Business Intelligence
Authors: Kumar N.
Journal: Big Data
DOI: 10.1089/big.2020.29036.cfp3
Published: 1 October 2020
|
Type: Article
Keywords:
Volume: 8
Pages: 452-453
ISSN/eISSN: /2167647X
|
Citations: 2
Article #:
Source ID: 21100780696
Funding:
|
| 602 |
Title: Effect of shod walking on plantar pressure with varying insole
Authors: Sandhu K.
Journal: Defence Life Science Journal
DOI: 10.14429/dlsj.5.15719
Published: October 2020
|
Type: Article
Keywords: Injury prevention | Insoles types | Military shod walking | Plantar pressure
Volume: 5
Pages: 248-254
ISSN/eISSN: /24560537
|
Citations: 1
Article #:
Source ID: 21100967064
Funding: Defence Research and Development Organisation
|
| 603 |
Title: Parametric analysis of magnetorheological finishing process for improved performance of gear profile
Authors: Yadav R.D.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2020.06.024
Published: September 2020
|
Type: Article
Keywords: Gear profile magnetorheological finishing tool | Gear shape accuracy | Response surface methodology
Volume: 57
Pages: 254-267
ISSN/eISSN: 15266125/
|
Citations: 31
Article #:
Source ID: 27677
Funding:
|
| 604 |
Title: A novel capacitive mass sensor using an open-loop controlled microcantilever
Authors: Godara R.K.
Journal: Microsystem Technologies
DOI: 10.1007/s00542-020-04850-5
Published: 1 September 2020
|
Type: Article
Keywords:
Volume: 26
Pages: 2977-2987
ISSN/eISSN: 09467076/14321858
|
Citations: 7
Article #:
Source ID: 26738
Funding:
|
| 605 |
Title: Design of a modular wheelchair with posture transformation capabilities from sitting to standing
Authors: Dawar G.
Journal: Disability and Rehabilitation Assistive Technology
DOI: 10.1080/17483107.2019.1604830
Published: 17 August 2020
|
Type: Article
Keywords: linkages | mechanism | Modular wheel chair | physically challenged | posture transformation | three point acting arm rest
Volume: 15
Pages: 670-683
ISSN/eISSN: 17483107/17483115
|
Citations: 8
Article #:
Source ID: 11700154372
Funding:
|
| 606 |
Title: A feasibility study to utilize kitchen waste for power generation in urban areas using CI engine
Authors: Lal S.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2019.1604895
Published: 2 August 2020
|
Type: Review
Keywords: Biogas generation | diesel | emissions | kitchen waste
Volume: 42
Pages: 1914-1922
ISSN/eISSN: 15567036/15567230
|
Citations: 6
Article #:
Source ID: 4500151514
Funding:
|
| 607 |
Title: Bearing remaining useful life estimation using an adaptive data-driven model based on health state change point identification and K-means clustering
Authors: Singh J.
Journal: Measurement Science and Technology
DOI: 10.1088/1361-6501/ab6671
Published: August 2020
|
Type: Article
Keywords: bearing health indicator | confidence value | prognostics | remaining useful life | Rolling element bearings
Volume: 31
Pages:
ISSN/eISSN: 09570233/13616501
|
Citations: 47
Article #: 085601
Source ID: 15526
Funding:
|
| 608 |
Title: Investigation of Microwave Processing Parameters on Development of Ni-40Cr3C2 Composite Clad and Their Characterization
Authors: Mago J.
Journal: Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science
DOI: 10.1007/s11661-020-05832-y
Published: 1 August 2020
|
Type: Article
Keywords:
Volume: 51
Pages: 4288-4300
ISSN/eISSN: 10735623/
|
Citations: 29
Article #:
Source ID: 27356
Funding: Science and Engineering Research Board
|
| 609 |
Title: Feasibility analysis for machining serpentine microchannels on glass using rotary ultrasonic milling
Authors: Jain A.
Journal: Measurement Journal of the International Measurement Confederation
DOI: 10.1016/j.measurement.2020.107844
Published: August 2020
|
Type: Article
Keywords: Glass | Grey relational analysis (GRA) | Microchannels | Micromachining | Rotary ultrasonic milling
Volume: 160
Pages:
ISSN/eISSN: 02632241/
|
Citations: 14
Article #: 107844
Source ID: 15424
Funding:
|
| 610 |
Title: Fabrication and Analysis of Wear Properties of Polyetherimide Composite Reinforced with Carbon Fiber
Authors: Shard A.
Journal: Journal of Failure Analysis and Prevention
DOI: 10.1007/s11668-020-00943-5
Published: 1 August 2020
|
Type: Article
Keywords: Carbon fiber | CFRP | Composite | Corrosion resistance | Material properties | Simulation
Volume: 20
Pages: 1388-1398
ISSN/eISSN: 15477029/18641245
|
Citations: 14
Article #:
Source ID: 12327
Funding:
|
| 611 |
Title: Electron beam welding of precipitation hardened CuCrZr alloy: Modeling and experimentation
Authors: SINGH R.
Journal: Transactions of Nonferrous Metals Society of China English Edition
DOI: 10.1016/S1003-6326(20)65368-7
Published: August 2020
|
Type: Article
Keywords: bead penetration | bead width | copper−chromium−zirconium alloy | electron beam welding | modeling
Volume: 30
Pages: 2156-2169
ISSN/eISSN: 10036326/22103384
|
Citations: 7
Article #:
Source ID: 27854
Funding:
|
| 612 |
Title: Process enhancement using hydrogen-induced shielding: H2-induced A-TIG welding process
Authors: Tathgir S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2020.1765251
Published: 26 July 2020
|
Type: Article
Keywords: Activated flux | arc constriction | dendrite | heat density | Marangoni | microstructure | Peclet number | XRD
Volume: 35
Pages: 1084-1095
ISSN/eISSN: 10426914/15322475
|
Citations: 13
Article #:
Source ID: 21054
Funding:
|
| 613 |
Title: Erosion tribo-performance of HVOF deposited Stellite-6 and Colmonoy-88 micron layers on SS-316L
Authors: Singh J.
Journal: Tribology International
DOI: 10.1016/j.triboint.2018.06.004
Published: July 2020
|
Type: Article
Keywords: Colmonoy-88 | HVOF thermal spraying | Slurry erosion | Stellite-6
Volume: 147
Pages:
ISSN/eISSN: 0301679X/
|
Citations: 73
Article #: 105262
Source ID: 22116
Funding:
|
| 614 |
Title: Wear studies of hybrid AMCs reinforced with naturally occurring sillimanite and rutile ceramic particles for brake-rotor applications
Authors: Gupta R.
Journal: Ceramics International
DOI: 10.1016/j.ceramint.2020.03.262
Published: July 2020
|
Type: Article
Keywords: Hybrid AMC | Mineral reinforcement | Thermal properties | Wear and friction test
Volume: 46
Pages: 16849-16859
ISSN/eISSN: 02728842/
|
Citations: 53
Article #:
Source ID: 21522
Funding: Council of Scientific and Industrial Research, India
|
| 615 |
Title: Flexural, pull-out, and fractured surface characterization for multi-material 3D printed functionally graded prototype
Authors: Kumar S.
Journal: Journal of Composite Materials
DOI: 10.1177/0021998319892067
Published: 1 July 2020
|
Type: Article
Keywords: Flexural properties | fractured surface analysis | fused deposition modeling | multi-layer printing | strain | stress | surface rendering
Volume: 54
Pages: 2087-2099
ISSN/eISSN: 00219983/1530793X
|
Citations: 34
Article #:
Source ID: 21140
Funding:
|
| 616 |
Title: Effect of surface topography on pull-out strength of cortical screw after ultrasonic bone drilling: an in vitro study
Authors: Agarwal R.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-020-02449-5
Published: 1 July 2020
|
Type: Article
Keywords: Microcracks | Pull-out strength | Rotary ultrasonic bone drilling | SBF | Surface roughness
Volume: 42
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 31
Article #: 363
Source ID: 71359
Funding:
|
| 617 |
Title: A computational study on air entrapment and its effect on convective heat transfer during droplet impact on a substrate
Authors: Kumar R.
Journal: International Journal of Thermal Sciences
DOI: 10.1016/j.ijthermalsci.2020.106363
Published: July 2020
|
Type: Article
Keywords: Air entrapment dynamics | Droplet impact | Numerical simulation | Wettability
Volume: 153
Pages:
ISSN/eISSN: 12900729/
|
Citations: 24
Article #: 106363
Source ID: 13761
Funding:
|
| 618 |
Title: Formability Analysis of AA1200 H14 Aluminum Alloy Using Single Point Incremental Forming Process
Authors: Kumar N.
Journal: Transactions of the Indian Institute of Metals
DOI: 10.1007/s12666-020-02014-7
Published: 1 July 2020
|
Type: Article
Keywords: Formability | Forming limit diagram | Single-point incremental forming | Taguchi method
Volume: 73
Pages: 1975-1984
ISSN/eISSN: 09722815/09751645
|
Citations: 19
Article #:
Source ID: 12149
Funding:
|
| 619 |
Title: Dry reforming of methane using various catalysts in the process: review
Authors: Singh R.
Journal: Biomass Conversion and Biorefinery
DOI: 10.1007/s13399-019-00417-1
Published: 1 June 2020
|
Type: Review
Keywords: Activity | Coking | Commercialization | Methane | Promoters | Reforming catalyst | Supports | Syngas
Volume: 10
Pages: 567-587
ISSN/eISSN: 21906815/21906823
|
Citations: 84
Article #:
Source ID: 21100466851
Funding:
|
| 620 |
Title: Investigations of the mechanical properties on different print orientations in SLA 3D printed resin
Authors: Saini J.S.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406220904106
Published: 1 June 2020
|
Type: Article
Keywords: Additive manufacturing | mechanical properties | polymers | print orientations | stereolithography apparatus
Volume: 234
Pages: 2279-2293
ISSN/eISSN: 09544062/20412983
|
Citations: 65
Article #:
Source ID: 20407
Funding:
|
| 621 |
Title: In vivo evaluation of machining forces, torque, and bone quality during skull bone grinding
Authors: Babbar A.
Journal: Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
DOI: 10.1177/0954411920911499
Published: 1 June 2020
|
Type: Article
Keywords: bone | dynamometer | forces | Grinding | neurosurgery | surface morphology | torque
Volume: 234
Pages: 626-638
ISSN/eISSN: 09544119/20413033
|
Citations: 50
Article #:
Source ID: 16334
Funding:
|
| 622 |
Title: Analysis of laminated piezoelectric composite plates using an inverse hyperbolic coupled plate theory
Authors: Joshan Y.S.
Journal: Applied Mathematical Modelling
DOI: 10.1016/j.apm.2020.01.050
Published: June 2020
|
Type: Article
Keywords: Actuators and sensors | Non-polynomial plate theories | Piezoelectric smart plates | Shear deformation theory
Volume: 82
Pages: 359-378
ISSN/eISSN: 0307904X/
|
Citations: 30
Article #:
Source ID: 28065
Funding:
|
| 623 |
Title: Analysis of susceptor temperature during microwave heating and characterization of Ni-30Cr3C2 clads
Authors: Bansal S.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/1464420720914343
Published: 1 June 2020
|
Type: Article
Keywords: Cladding | flexural strength | microhardness | microstructure | microwave hybrid heating | susceptor
Volume: 234
Pages: 881-894
ISSN/eISSN: 14644207/20413076
|
Citations: 11
Article #:
Source ID: 20971
Funding: Thapar Institute of Engineering and Technology
|
| 624 |
Title: A semi-homogenized extended isogeometric analysis approach for fracture in functionally graded materials containing discontinuities
Authors: Bhardwaj G.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406220905857
Published: 1 June 2020
|
Type: Article
Keywords: crack | extended isogeometric analysis | Functionally graded material | inclusion and hole | semi-homogenized approach
Volume: 234
Pages: 2211-2232
ISSN/eISSN: 09544062/20412983
|
Citations: 5
Article #:
Source ID: 20407
Funding:
|
| 625 |
Title: A framework for three-dimensional finite element analysis of unidirectional and cross-ply composite layups through localized microstructures under hygromechanical conditions
Authors: Jain D.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-020-02424-0
Published: 1 June 2020
|
Type: Article
Keywords: Concentric cylinder assemblage | Fiber-reinforced polymers (FRPs) | Hygromechanical stresses | Micromechanics | Moisture diffusion
Volume: 42
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 2
Article #: 346
Source ID: 71359
Funding:
|
| 626 |
Title: Modelling solids friction for fluidized dense-phase pneumatic conveying
Authors: Sharma K.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2018.1545712
Published: 18 May 2020
|
Type: Article
Keywords: dense-phase | Pneumatic conveying | Runge-Kutta-Fehlberg | scale-up validation | solids friction
Volume: 38
Pages: 391-403
ISSN/eISSN: 02726351/15480046
|
Citations: 3
Article #:
Source ID: 13661
Funding:
|
| 627 |
Title: Material removal rate during powder metallurgy Cu-Ti electrodes in electrical discharge machining of EN9 steel
Authors: Shard A.
Journal: Aip Conference Proceedings
DOI: 10.1063/5.0001826
Published: 4 May 2020
|
Type: Conference Paper
Keywords:
Volume: 2220
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 2
Article #: 060016
Source ID: 26916
Funding:
|
| 628 |
Title: Surface roughness evaluation for electrical discharge machining using powder metallurgy tool
Authors: Shard A.
Journal: Aip Conference Proceedings
DOI: 10.1063/5.0001824
Published: 4 May 2020
|
Type: Conference Paper
Keywords:
Volume: 2220
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 1
Article #: 060017
Source ID: 26916
Funding:
|
| 629 |
Title: A review on XIGA method for computational fracture mechanics applications
Authors: Yadav A.
Journal: Engineering Fracture Mechanics
DOI: 10.1016/j.engfracmech.2020.107001
Published: 1 May 2020
|
Type: Review
Keywords: B-splines | Crack propagation | Enrichment functions | Fracture | NURBS | XIGA
Volume: 230
Pages:
ISSN/eISSN: 00137944/
|
Citations: 42
Article #: 107001
Source ID: 20594
Funding: Science and Engineering Research Board
|
| 630 |
Title: Lubrication characteristics and wear mechanism mapping for hybrid aluminium metal matrix composite sliding under surfactant functionalized MWCNT-oil
Authors: Singh H.
Journal: Tribology International
DOI: 10.1016/j.triboint.2019.106152
Published: May 2020
|
Type: Article
Keywords: Friction | Lubricant additives | Metal matrix composite | Wear map
Volume: 145
Pages:
ISSN/eISSN: 0301679X/
|
Citations: 31
Article #: 106152
Source ID: 22116
Funding:
|
| 631 |
Title: Creep response of rotating composite discs having exponential, hyperbolic, linear and constant thickness profiles
Authors: Singh R.
Journal: Defence Science Journal
DOI: 10.14429/dsj.70.14913
Published: 1 May 2020
|
Type: Article
Keywords: Aluminium composites | Creep modelling | Rotating disc | Strain rates | Variable thickness
Volume: 70
Pages: 292-298
ISSN/eISSN: 0011748X/0976464X
|
Citations: 7
Article #:
Source ID: 17294
Funding:
|
| 632 |
Title: Effect of hydrogen-enriched biogas induction on combustion, performance, and emission characteristics of dual-fuel compression ignition engine
Authors: Rosha P.
Journal: Asia Pacific Journal of Chemical Engineering
DOI: 10.1002/apj.2435
Published: 1 May 2020
|
Type: Article
Keywords: co-combustion | combustion characteristics | dual-fuel technology | exhaust emission | ignition engine | renewable H2-enriched biogas
Volume: 15
Pages:
ISSN/eISSN: 19322135/19322143
|
Citations: 6
Article #: e2435
Source ID: 5400152634
Funding:
|
| 633 |
Title: In vitro comparison of conventional surgical and rotary ultrasonic bone drilling techniques
Authors: Gupta V.
Journal: Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
DOI: 10.1177/0954411919898301
Published: 1 April 2020
|
Type: Article
Keywords: Bone drilling | dynamometer | force | temperature | thermocouple | torque
Volume: 234
Pages: 398-411
ISSN/eISSN: 09544119/20413033
|
Citations: 36
Article #:
Source ID: 16334
Funding:
|
| 634 |
Title: Investigations for mechanical, thermal and magnetic properties of polymeric composite matrix for four-dimensional printing applications
Authors: Kumar S.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-020-2251-4
Published: 1 April 2020
|
Type: Article
Keywords: Break elongation | Break strength | Magnetic hysteresis loop and porosity | Magnetite powder | Peak elongation | Peak strength | PLA | PVC | Wood dust
Volume: 42
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 27
Article #: 160
Source ID: 71359
Funding:
|
| 635 |
Title: Computationally efficient procedure for stress analysis of laminated composite shell subjected to different loading using abaqus software
Authors: Gadade A.M.
Journal: Revue Des Composites Et Des Materiaux Avances
DOI: 10.18280/rcma.300206
Published: April 2020
|
Type: Article
Keywords: Deformation analysis | Finite element analysis | Layered shell panel | Modeling and simulation | Polymer matrix composites
Volume: 30
Pages: 95-102
ISSN/eISSN: 11697954/19585799
|
Citations: 2
Article #:
Source ID: 21100211348
Funding:
|
| 636 |
Title: An original framework for strategic technology development of small manufacturing enterprises in emerging economies
Authors: Nanda T.
Journal: Benchmarking
DOI: 10.1108/BIJ-02-2019-0074
Published: 21 Mar 2020
|
Type: Article
Keywords: Innovation | Manufacturing strategy | SMEs | Technology development
Volume: 27
Pages: 781-816
ISSN/eISSN: 14635771/
|
Citations: 17
Article #:
Source ID: 20793
Funding:
|
| 637 |
Title: Experimental and computational inverse thermal analysis of transient, non-linear heat flux in circular pin fin with temperature-dependent thermal properties
Authors: Singhal M.
Journal: Applied Thermal Engineering
DOI: 10.1016/j.applthermaleng.2019.114721
Published: 5 March 2020
|
Type: Article
Keywords: Convection | Feedback model | Golden section search method | Pdepe solver | Radiation | Transient temperature
Volume: 168
Pages:
ISSN/eISSN: 13594311/
|
Citations: 9
Article #: 114721
Source ID: 13688
Funding:
|
| 638 |
Title: Investigations on the strength of mechanical joints prepared from carbon fiber laminates with addition of carbon nanotubes
Authors: Kumar M.
Journal: Journal of Mechanical Science and Technology
DOI: 10.1007/s12206-020-0208-2
Published: 1 March 2020
|
Type: Article
Keywords: Carbon fiber | Carbon nanotubes | Failure load | Failure mode | Pin joints
Volume: 34
Pages: 1059-1070
ISSN/eISSN: 1738494X/19763824
|
Citations: 22
Article #:
Source ID: 144699
Funding: Bhabha Atomic Research Centre
|
| 639 |
Title: Experimental analysis of magnetorheological finishing of blind hole surfaces using permanent magnet designed tools
Authors: Sirwal S.A.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-020-2225-6
Published: 1 March 2020
|
Type: Article
Keywords: Blind hole | Cylindrical | Magnetic field | Magnetorheological (MR) fluids | Nano-finishing | P20 tool steel | Permanent magnets
Volume: 42
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 21
Article #: 140
Source ID: 71359
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 640 |
Title: Effect of machining parameters on surface finish and noise patterns for machining EN-19 steel with PVD-TiN coated mixed ceramic inserts in CNC turning operation
Authors: Arora D.
Journal: Journal of Scientific and Industrial Research
DOI:
Published: March 2020
|
Type: Article
Keywords: CNC turning | Frequency spectrum analysis | Surface finish optimization
Volume: 79
Pages: 235-240
ISSN/eISSN: 00224456/
|
Citations: 3
Article #:
Source ID: 23649
Funding: Thapar Institute of Engineering and Technology
|
| 641 |
Title: A novel stand-alone proton battery-based power supply system for marine ships
Authors: Oberoi A.S.
Journal: Indian Journal of Geo Marine Sciences
DOI:
Published: March 2020
|
Type: Article
Keywords: Fossil fuels | Green house gases | Lithium batteries | Marine ships | Photovoltaic system | Proton battery
Volume: 49
Pages: 436-440
ISSN/eISSN: 25826506/25826727
|
Citations: 2
Article #:
Source ID: 21100305250
Funding:
|
| 642 |
Title: A study of energy loss due to particle to particle and wall collisions during fluidized dense-phase pneumatic transport
Authors: Sharma K.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2019.12.033
Published: 15 February 2020
|
Type: Article
Keywords: Dense-phase flow | Energy loss | Modified two-layer model | Particle velocity | Pneumatic transport | Scale-up validation
Volume: 362
Pages: 707-716
ISSN/eISSN: 00325910/1873328X
|
Citations: 11
Article #:
Source ID: 13717
Funding:
|
| 643 |
Title: In-situ simultaneous surface finishing using abrasive flow machining via novel fixture
Authors: Baraiya R.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2019.12.051
Published: February 2020
|
Type: Article
Keywords: Abrasion | Abrasive flow machining | Fixture | Simultaneous | Surface roughness
Volume: 50
Pages: 266-278
ISSN/eISSN: 15266125/
|
Citations: 64
Article #:
Source ID: 27677
Funding:
|
| 644 |
Title: Computational evaluation of effectiveness for intratumoral injection strategies in magnetic nanoparticle assisted thermotherapy
Authors: Singh G.
Journal: International Journal of Heat and Mass Transfer
DOI: 10.1016/j.ijheatmasstransfer.2019.119129
Published: February 2020
|
Type: Article
Keywords: CEM 43 | Intratumoral injection strategies | Magnetic nanoparticle hyperthermia | MNP doses | Thermal dosimetry
Volume: 148
Pages:
ISSN/eISSN: 00179310/
|
Citations: 26
Article #: 119129
Source ID: 20448
Funding:
|
| 645 |
Title: Walking Model of Jansen Mechanism-Based Quadruped Robot and Application to Obstacle Avoidance
Authors: Singh R.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-019-04135-8
Published: 1 February 2020
|
Type: Article
Keywords: Fuzzy logic controller | Jansen mechanism | Obstacle avoidance | Quadruped robot | SimMechanics
Volume: 45
Pages: 653-664
ISSN/eISSN: 2193567X/21914281
|
Citations: 24
Article #:
Source ID: 13951
Funding:
|
| 646 |
Title: Non-polynomial framework for static analysis of functionally graded carbon nano-tube reinforced plates
Authors: Soni A.
Journal: Composite Structures
DOI: 10.1016/j.compstruct.2019.111569
Published: 1 February 2020
|
Type: Article
Keywords: Advanced composites | Carbon nanotube | Shear deformation theory | Static analysis
Volume: 233
Pages:
ISSN/eISSN: 02638223/
|
Citations: 24
Article #: 111569
Source ID: 15063
Funding: Science and Engineering Research Board
|
| 647 |
Title: Development of polymer abrasive medium for nanofinishing of microholes on surgical stainless steel using abrasive flow finishing process
Authors: Singh S.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/0954405419883768
Published: 1 February 2020
|
Type: Article
Keywords: microholes | Nanofinishing | rheology | surface roughness | surgical stainless steel
Volume: 234
Pages: 355-370
ISSN/eISSN: 09544054/20412975
|
Citations: 22
Article #:
Source ID: 20406
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 648 |
Title: Magnetorheological finishing of grooved drum surface and its performance analysis in winding process
Authors: Singh M.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-019-04812-w
Published: 1 February 2020
|
Type: Article
Keywords: Breakage of yarn | Hairiness index | Magnetorheological | Nano-finishing | Surface roughness | Winding grooved drum
Volume: 106
Pages: 2921-2937
ISSN/eISSN: 02683768/14333015
|
Citations: 19
Article #:
Source ID: 20428
Funding:
|
| 649 |
Title: A curvelet method for numerical solution of partial differential equations
Authors: Sharma D.
Journal: Applied Numerical Mathematics
DOI: 10.1016/j.apnum.2019.08.029
Published: February 2020
|
Type: Article
Keywords: Curvelet | Curvelet based numerical methods | Partial differential equations | Wavelet
Volume: 148
Pages: 28-44
ISSN/eISSN: 01689274/
|
Citations: 6
Article #:
Source ID: 28067
Funding: Department of Science and Technology, Ministry of Science and Technology
|
| 650 |
Title: Moisture Absorption in Fibre Matrix Laminates for Different Fibre Orientations: Simulation and Experimental Study
Authors: Vats S.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-019-04284-w
Published: 1 February 2020
|
Type: Article
Keywords: Bond graph modelling | Experiment | FEM | Fibre-reinforced polymers | Fick’s Law | Hygro-mechanical analysis | Moisture diffusion
Volume: 45
Pages: 1207-1218
ISSN/eISSN: 2193567X/21914281
|
Citations: 2
Article #:
Source ID: 13951
Funding:
|
| 651 |
Title: Effect of process parameters and vc content on structural and mechanical properties of wc-20co nano composites
Authors: Kumar D.
Journal: Indian Journal of Engineering and Materials Sciences
DOI:
Published: February 2020
|
Type: Article
Keywords: Fracture toughness | High-hardness | Nanocomposites | Tungsten-carbide
Volume: 27
Pages: 58-66
ISSN/eISSN: 09714588/09751017
|
Citations: 1
Article #:
Source ID: 29812
Funding:
|
| 652 |
Title: Experimental investigation of cutting temperature during drilling of float glass specimen
Authors: Sharma A.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/715/1/012050
Published: 3 January 2020
|
Type: Conference Paper
Keywords:
Volume: 715
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 25
Article #: 012050
Source ID: 19700200831
Funding:
|
| 653 |
Title: Development of microwave processed Ni + 20% SiC based composite clads on AISI-304 steel
Authors: Kaushal S.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/715/1/012001
Published: 3 January 2020
|
Type: Conference Paper
Keywords:
Volume: 715
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 5
Article #: 012001
Source ID: 19700200831
Funding:
|
| 654 |
Title: Production of syngas from agricultural residue as a renewable fuel and its sustainable use in dual-fuel compression ignition engine to investigate performance, emission, and noise characteristics
Authors: Singh J.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2019.1587053
Published: 2 January 2020
|
Type: Article
Keywords: Biomass | DFCI | gasification | GHG | syngas
Volume: 42
Pages: 41-55
ISSN/eISSN: 15567036/15567230
|
Citations: 20
Article #:
Source ID: 4500151514
Funding:
|
| 655 |
Title: Chemical treatment of low-grade coal using Taguchi approach
Authors: Singh J.P.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2018.1496959
Published: 2 January 2020
|
Type: Article
Keywords: ash content | chemical treatment | Coal | low-grade coal | ultra-clean coal
Volume: 38
Pages: 73-80
ISSN/eISSN: 02726351/15480046
|
Citations: 14
Article #:
Source ID: 13661
Funding:
|
| 656 |
Title: Quantitative analysis of microstructure refinement in ultrafine-grained strips of Al6063 fabricated using large strain extrusion machining
Authors: Sharma V.K.
Journal: Machining Science and Technology
DOI: 10.1080/10910344.2019.1636264
Published: 2 January 2020
|
Type: Article
Keywords: Crystallite size | deformation | misorientation | nano hardness | rake angle | strain hardening
Volume: 24
Pages: 42-64
ISSN/eISSN: 10910344/15322483
|
Citations: 12
Article #:
Source ID: 21223
Funding:
|
| 657 |
Title: A review on process planning strategies and challenges of WAAM
Authors: Singh S.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2021.02.632
Published: 2020
|
Type: Conference Paper
Keywords: Additive manufacturing | Layer by layer manufacturing | Tool path planning | WAAM | Welding arc
Volume: 47
Pages: 6564-6575
ISSN/eISSN: /22147853
|
Citations: 97
Article #:
Source ID: 21100370037
Funding:
|
| 658 |
Title: Deep learning-based cross-domain adaptation for gearbox fault diagnosis under variable speed conditions
Authors: Singh J.
Journal: Measurement Science and Technology
DOI: 10.1088/1361-6501/ab64aa
Published: 2020
|
Type: Article
Keywords: deep learning | domain adaptation | fault diagnosis | gearbox health monitoring
Volume: 31
Pages:
ISSN/eISSN: 09570233/13616501
|
Citations: 74
Article #: 055601
Source ID: 15526
Funding:
|
| 659 |
Title: Industrial AI and predictive analytics for smart manufacturing systems
Authors: Lee J.
Journal: Smart Manufacturing Concepts and Methods
DOI: 10.1016/B978-0-12-820027-8.00008-3
Published: 1 January 2020
|
Type: Book Chapter
Keywords: Cyberphysical systems | Enabling technologies | Industrial ai | Industry 4.0 | Smart manufacturing
Volume:
Pages: 213-244
ISSN/eISSN: /
|
Citations: 31
Article #:
Source ID: 21101077603
Funding:
|
| 660 |
Title: On flexural and pull out properties of 3D printed PLA based hybrid composite matrix
Authors: Kumar S.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab66f4
Published: 2020
|
Type: Article
Keywords: Flexural properties | Multifactor optimization | Pull out properties
Volume: 7
Pages:
ISSN/eISSN: /20531591
|
Citations: 27
Article #: 015330
Source ID: 21100432452
Funding:
|
| 661 |
Title: Theoretical and experimental investigations on nano-finishing of internal cylindrical surfaces with a newly developed rotational magnetorheological honing process
Authors: Paswan S.K.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406219875773
Published: 1 January 2020
|
Type: Article
Keywords: cutting shear force | ferromagnetic cylinder | magnetic flux density | Magnetorheological honing | rotational | stationary | surface roughness
Volume: 234
Pages: 363-383
ISSN/eISSN: 09544062/20412983
|
Citations: 23
Article #:
Source ID: 20407
Funding:
|
| 662 |
Title: Potential porous mediums for electrochemical hydrogen storage: State of art and comparative study
Authors: Jindal H.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2020.01.246
Published: 2020
|
Type: Conference Paper
Keywords: Activated carbon | Complex hydride | Fuel cell | Graphene | Hydrogen storage
Volume: 21
Pages: 1888-1898
ISSN/eISSN: /22147853
|
Citations: 18
Article #:
Source ID: 21100370037
Funding:
|
| 663 |
Title: Modeling of Linear Shrinkage in PLA Parts Fabricated by 3D Printing Using TOPSIS Method
Authors: Mago J.
Journal: Lecture Notes on Multidisciplinary Industrial Engineering
DOI: 10.1007/978-981-32-9433-2_23
Published: 2020
|
Type: Book Chapter
Keywords: 3D printing | PLA | RSM | Shrinkage | TOPSIS
Volume: Part F164
Pages: 267-276
ISSN/eISSN: 25225022/25225030
|
Citations: 17
Article #:
Source ID: 21101156896
Funding:
|
| 664 |
Title: Investigation of high temperature corrosion resistance of Ni25Cr coated and bare 347H SS in actual husk fired boiler atmosphere
Authors: Gada H.
Journal: Engineering Failure Analysis
DOI: 10.1016/j.engfailanal.2019.104256
Published: January 2020
|
Type: Article
Keywords: 75Ni25Cr coating | D-gun | High temperature corrosion | Husk fired boiler
Volume: 108
Pages:
ISSN/eISSN: 13506307/
|
Citations: 14
Article #: 104256
Source ID: 20593
Funding:
|
| 665 |
Title: Biomaterials and Fabrication Methods of Scaffolds for Tissue Engineering Applications
Authors: Babbar A.
Journal: Materials Horizons from Nature to Nanomaterials
DOI: 10.1007/978-981-15-5424-7_8
Published: 2020
|
Type: Book Chapter
Keywords: Additive manufacturing | Biomaterials | PLA | Scaffolds | Tissue engineering
Volume:
Pages: 167-186
ISSN/eISSN: 25245384/25245392
|
Citations: 13
Article #:
Source ID: 21101128543
Funding:
|
| 666 |
Title: Rheological study of the developed medium and its correlation with surface roughness during abrasive flow finishing of micro-slots
Authors: Singh S.
Journal: Machining Science and Technology
DOI: 10.1080/10910344.2020.1771570
Published: 2020
|
Type: Article
Keywords: Abrasion | abrasive | finishing | micro-slots | rheology | roughness
Volume:
Pages: 882-905
ISSN/eISSN: 10910344/15322483
|
Citations: 12
Article #:
Source ID: 21223
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 667 |
Title: Effect of TiC Reinforcement in the Copper Tool on Roundness During EDM Process
Authors: Walia A.S.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-4059-2_10
Published: 2020
|
Type: Conference Paper
Keywords: Discharge current | EDM | Out of roundness | Pulse on/off time
Volume:
Pages: 125-135
ISSN/eISSN: 21954356/21954364
|
Citations: 12
Article #:
Source ID: 21100431311
Funding:
|
| 668 |
Title: Silicone oil envelope for enhancing the performance of nanofluid-based direct absorption solar collectors
Authors: Bhalla V.
Journal: Renewable Energy
DOI: 10.1016/j.renene.2019.08.024
Published: January 2020
|
Type: Article
Keywords: Heat transfer | Nanofluid | Silicone oil | Solar energy | Stratified fluid
Volume: 145
Pages: 2733-2740
ISSN/eISSN: 09601481/18790682
|
Citations: 10
Article #:
Source ID: 27569
Funding: Indo-US Science and Technology Forum
|
| 669 |
Title: Silicone oil envelope for enhancing the performance of nanofluid-based direct absorption solar collectors
Authors: Bhalla V.
Journal: Renewable Energy
DOI: 10.1016/j.renene.2019.08.024
Published: January 2020
|
Type: Article
Keywords: Heat transfer | Nanofluid | Silicone oil | Solar energy | Stratified fluid
Volume: 145
Pages: 2733-2740
ISSN/eISSN: 09601481/18790682
|
Citations: 10
Article #:
Source ID: 27569
Funding: Indo-US Science and Technology Forum
|
| 670 |
Title: Impedance control of three dimensional hybrid manipulator
Authors: Arora R.
Journal: Journal of Mechanical Science and Technology
DOI: 10.1007/s12206-019-1235-8
Published: 1 January 2020
|
Type: Article
Keywords: Amnesia | Hybrid manipulator | Impedance control | Overwhelming controller | Trajectory
Volume: 34
Pages: 359-367
ISSN/eISSN: 1738494X/19763824
|
Citations: 9
Article #:
Source ID: 144699
Funding:
|
| 671 |
Title: Comparative study of knee joint torque estimations for linear and rotary actuators using bond graph approach for stand–sit–stand motions
Authors: Jain P.
Journal: International Journal of Advanced Robotic Systems
DOI: 10.1177/1729881420963742
Published: 2020
|
Type: Article
Keywords: bond graph modelling | four-bar mechanism | Knee exoskeleton | knee joint torque | linear actuator | rotary actuator | stand–sit–stand motions
Volume: 17
Pages:
ISSN/eISSN: 17298806/17298814
|
Citations: 9
Article #:
Source ID: 144749
Funding:
|
| 672 |
Title: Investigations for Barium Titanate and Graphene Reinforced PVDF Matrix for 4D Applications
Authors: Sharma R.
Journal: Encyclopedia of Renewable and Sustainable Materials Volume 1 5
DOI: 10.1016/B978-0-12-803581-8.11306-2
Published: 1 January 2020
|
Type: Book Chapter
Keywords: 4D applications | Fused deposition modeling | Graphene | PVDF
Volume: 1-5
Pages: 366-375
ISSN/eISSN: /
|
Citations: 7
Article #:
Source ID: 21101146665
Funding:
|
| 673 |
Title: Gearbox Fault Diagnosis using Advanced Computational Intelligence
Authors: Mukherjee S.
Journal: Procedia Computer Science
DOI: 10.1016/j.procs.2020.03.370
Published: 2020
|
Type: Conference Paper
Keywords: Features Classification | Features selection | Gearbox | J48 | Naïve Bayes | Signal processing | Time Synchronous Averaging
Volume: 167
Pages: 1594-1603
ISSN/eISSN: /18770509
|
Citations: 7
Article #:
Source ID: 19700182801
Funding:
|
| 674 |
Title: An Improved Signal Pre-Processing Method for Gearbox Fault Features Extraction
Authors: Mukherjee S.
Journal: Procedia Computer Science
DOI: 10.1016/j.procs.2020.03.371
Published: 2020
|
Type: Conference Paper
Keywords: Empirical mode decomposition | IMFs | Power Spectrum | Time synchronous averaging
Volume: 167
Pages: 1604-1614
ISSN/eISSN: /18770509
|
Citations: 5
Article #:
Source ID: 19700182801
Funding:
|
| 675 |
Title: Direct Photo-Thermal Energy Storage Using Nanoparticles Laden Phase Change Materials
Authors: Moudgil D.
Journal: Energy Environment and Sustainability
DOI: 10.1007/978-981-15-0675-8_12
Published: 2020
|
Type: Book Chapter
Keywords: Nanoparticles | Optical charging | Phase change material (PCM)
Volume:
Pages: 235-246
ISSN/eISSN: 25228366/25228374
|
Citations: 4
Article #:
Source ID: 21101041971
Funding: Department of Mechanical Engineering, College of Engineering, Michigan State University
|
| 676 |
Title: Modelling and Analysis of Change in Shape of sintered Cu–TiC tool tip during Electrical Discharge Machining process
Authors: Walia A.S.
Journal: Lecture Notes on Multidisciplinary Industrial Engineering
DOI: 10.1007/978-981-32-9471-4_42
Published: 2020
|
Type: Book Chapter
Keywords: Buckingham’s π-theorem | Dimensional analysis | Electrical discharge machining | Out of roundness | Tool shape
Volume: Part F165
Pages: 515-525
ISSN/eISSN: 25225022/25225030
|
Citations: 4
Article #:
Source ID: 21101156896
Funding:
|
| 677 |
Title: Investigation of cghaz during single and multi pass submerged arc welding of high strength steel
Authors: Sharma S.K.
Journal: American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP
DOI: 10.1115/PVP2020-21555
Published: 2020
|
Type: Conference Paper
Keywords: High strength | Steel | Thermomechanical | Welding
Volume: 6
Pages:
ISSN/eISSN: 0277027X/
|
Citations: 2
Article #: v006t06a055
Source ID: 19903
Funding:
|
| 678 |
Title: Investigation of cghaz during single and multi pass submerged arc welding of high strength steel
Authors: Sharma S.K.
Journal: American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP
DOI: 10.1115/PVP2020-21555
Published: 2020
|
Type: Conference Paper
Keywords: High strength | Steel | Thermomechanical | Welding
Volume: 6
Pages:
ISSN/eISSN: 0277027X/
|
Citations: 2
Article #: v006t06a055
Source ID: 19903
Funding:
|
| 679 |
Title: Parametric Study of a Newly Developed Magnetorheological Honing Process
Authors: Bedi T.S.
Journal: Lecture Notes on Multidisciplinary Industrial Engineering
DOI: 10.1007/978-981-32-9471-4_39
Published: 2020
|
Type: Book Chapter
Keywords: Honing | Magnetorheological fluid | Response surface methodology
Volume: Part F165
Pages: 483-491
ISSN/eISSN: 25225022/25225030
|
Citations: 2
Article #:
Source ID: 21101156896
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 680 |
Title: A Novel Magnetorheological Grinding Process for Finishing the Internal Cylindrical Surfaces
Authors: Aggarwal A.
Journal: Lecture Notes on Multidisciplinary Industrial Engineering
DOI: 10.1007/978-981-32-9471-4_15
Published: 2020
|
Type: Book Chapter
Keywords: Magnetic flux density | Magnetorheological fluid | Magnetorheological grinding tool | Surface roughness
Volume: Part F165
Pages: 179-189
ISSN/eISSN: 25225022/25225030
|
Citations: 2
Article #:
Source ID: 21101156896
Funding:
|
| 681 |
Title: Effect of Nanoclay in Unidirectional Carbon–Epoxy Laminated Composites
Authors: Singh V.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-15-4059-2_13
Published: 2020
|
Type: Conference Paper
Keywords: Carbon-reinforced laminates | Failure analysis | FEM | Nanoclay
Volume:
Pages: 159-170
ISSN/eISSN: 21954356/21954364
|
Citations: 2
Article #:
Source ID: 21100431311
Funding:
|
| 682 |
Title: Development and rheological characterisation of abrasive flow finishing medium for finishing macro to micro features
Authors: Singh S.
Journal: Defence Science Journal
DOI: 10.14429/dsj.70.14790
Published: 2020
|
Type: Article
Keywords: Abrasive flow finishing | Medium | Rheology | Surface roughness
Volume: 70
Pages: 190-196
ISSN/eISSN: 0011748X/0976464X
|
Citations: 1
Article #:
Source ID: 17294
Funding:
|
| 683 |
Title: Five-axis tool positioning of a toroidal end mill tool near common edge between two intersecting surfaces
Authors: Sharma S.K.
Journal: Computer Aided Design and Applications
DOI: 10.14733/cadaps.2020.699-715
Published: 2020
|
Type: Article
Keywords: Drop spin method DSM | Multipoint five-axis machining | Tensor product surfaces | Toroidal end mill
Volume: 17
Pages: 699-715
ISSN/eISSN: 16864360/
|
Citations: 1
Article #:
Source ID: 4700151607
Funding: Natural Sciences and Engineering Research Council of Canada
|
| 684 |
Title: Investigation of Weld Bead Shape Parameters in Relation to Heat Input During Submerged Arc Welding
Authors: Sharma S.K.
Journal: Lecture Notes on Multidisciplinary Industrial Engineering
DOI: 10.1007/978-981-15-4619-8_25
Published: 2020
|
Type: Book Chapter
Keywords: Cooling time | Heat input | SAW | Shape-relationship parameters | Submerged arc welding | Weld bead
Volume: Part F255
Pages: 329-340
ISSN/eISSN: 25225022/25225030
|
Citations: 1
Article #:
Source ID: 21101156896
Funding:
|
| 685 |
Title: Performance comparison of PID and ANFIS controller for stabilization of x and x-y inverted pendulums
Authors: Chawla I.
Journal: Advances in Intelligent Systems and Computing
DOI: 10.1007/978-3-030-16657-1_17
Published: 2020
|
Type: Conference Paper
Keywords: ANFIS controller | Inverted pendulum | Robustness | Stabilization
Volume: 940
Pages: 182-192
ISSN/eISSN: 21945357/21945365
|
Citations: 1
Article #:
Source ID: 5100152904
Funding:
|
| 686 |
Title: Convective and radiative thermal analysis of composite wall with nonlinear temperature-dependent properties
Authors: Singhal M.
Journal: Heat Transfer Research
DOI: 10.1615/HEATTRANSRES.2019031349
Published: 2020
|
Type: Article
Keywords: Adomian decomposition method | Composite walls | Emissivity | Internal heat generation rate | Newton-Raphson method | Steady state solution | Thermal conductivity | Thermal convective | Thermal performance | Thermal radiation
Volume: 51
Pages: 275-296
ISSN/eISSN: 10642285/
|
Citations: 1
Article #:
Source ID: 20381
Funding: Science and Engineering Research Board
|
| 687 |
Title: Tool Electrode Material and Tool Fabrication Techniques for Electrical Discharge Machining Process
Authors: Walia A.S.
Journal: Advances in Nonconventional Machining Processes
DOI: 10.2174/9789811483653120010004
Published: 1 January 2020
|
Type: Book Chapter
Keywords: Composite | Electrical discharge machining | Electrode wear rate | Material removal rate | Powder metallurgy | Rapid prototyping
Volume:
Pages: 17-41
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101257421
Funding:
|
| 688 |
Title: Nanofinishing of External Cylindrical Surface of C60 Steel Using Rotating Core-Based Magnetorheological Finishing Process
Authors: Singh M.
Journal: Lecture Notes on Multidisciplinary Industrial Engineering
DOI: 10.1007/978-981-32-9471-4_5
Published: 2020
|
Type: Book Chapter
Keywords: Cylindrical external surfaces | Magnetorheological finishing | Response surface methodology | Surface roughness
Volume: Part F165
Pages: 53-66
ISSN/eISSN: 25225022/25225030
|
Citations: 0
Article #:
Source ID: 21101156896
Funding:
|
| 689 |
Title: Nanofinishing of External Cylindrical Surface of C60 Steel Using Rotating Core-Based Magnetorheological Finishing Process
Authors: Singh M.
Journal: Lecture Notes on Multidisciplinary Industrial Engineering
DOI: 10.1007/978-981-32-9471-4_5
Published: 2020
|
Type: Book Chapter
Keywords: Cylindrical external surfaces | Magnetorheological finishing | Response surface methodology | Surface roughness
Volume: Part F165
Pages: 53-66
ISSN/eISSN: 25225022/25225030
|
Citations: 0
Article #:
Source ID: 21101156896
Funding:
|
| 690 |
Title: Modelling stress distribution in a flexible beam using bond graph approach
Authors: Tripathi J.P.
Journal: Applications and Techniques for Experimental Stress Analysis
DOI: 10.4018/978-1-7998-1690-4.ch011
Published: 27 December 2019
|
Type: Book Chapter
Keywords:
Volume:
Pages: 165-175
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101090706
Funding:
|
| 691 |
Title: Tribological performance of Yttrium (III) and Zirconium (IV) ceramics reinforced WC–10Co4Cr cermet powder HVOF thermally sprayed on X2CrNiMo-17-12-2 steel
Authors: Singh J.
Journal: Ceramics International
DOI: 10.1016/j.ceramint.2019.08.007
Published: 1 December 2019
|
Type: Article
Keywords: Cermet coating | HVOF thermal spraying | Slurry erosion | Stainless steel 316L | Yttria | Zirconia
Volume: 45
Pages: 23126-23142
ISSN/eISSN: 02728842/
|
Citations: 53
Article #:
Source ID: 21522
Funding:
|
| 692 |
Title: Enhancement of activated tungsten inert gas (A-TIG) welding using multi-component TiO2-SiO2-Al2O3 hybrid flux
Authors: Babbar A.
Journal: Measurement Journal of the International Measurement Confederation
DOI: 10.1016/j.measurement.2019.106912
Published: December 2019
|
Type: Article
Keywords: Activated flux | Depth of penetration | Microhardness | Microstructure | SS-304 alloy | Tensile strength
Volume: 148
Pages:
ISSN/eISSN: 02632241/
|
Citations: 45
Article #: 106912
Source ID: 15424
Funding:
|
| 693 |
Title: Efficient Volumetric Absorption Solar Thermal Platforms Employing Thermally Stable - Solar Selective Nanofluids Engineered from Used Engine Oil
Authors: Singh N.
Journal: Scientific Reports
DOI: 10.1038/s41598-019-47126-3
Published: 1 December 2019
|
Type: Article
Keywords:
Volume: 9
Pages:
ISSN/eISSN: /20452322
|
Citations: 34
Article #: 10541
Source ID: 21100200805
Funding: Department of Mechanical Engineering, College of Engineering, Michigan State University
|
| 694 |
Title: Parametric optimization of a newly developed magnetorheological honing process for internal finishing of EN-31 cylindrical workpieces
Authors: Grover V.
Journal: Engineering Research Express
DOI: 10.1088/2631-8695/ab551c
Published: December 2019
|
Type: Article
Keywords: Ferromagnetic EN31 material | Internal cylindrical surface | Magnetorheological honing | Response surface methodology | Surface roughness
Volume: 1
Pages:
ISSN/eISSN: /26318695
|
Citations: 7
Article #: 025036
Source ID: 21101023156
Funding:
|
| 695 |
Title: An adaptive grid-based curvelet optimized solution for nonlinear Schrödinger equation
Authors: Sharma D.
Journal: International Journal of Modern Physics C
DOI: 10.1142/S0129183119501018
Published: 1 December 2019
|
Type: Article
Keywords: adaptive grid | Curvelet | multiresolution analysis (MRA) | Schrödinger equation
Volume: 30
Pages:
ISSN/eISSN: 01291831/
|
Citations: 2
Article #: 1950101
Source ID: 28077
Funding: Science and Engineering Research Board
|
| 696 |
Title: Numerical study of pore formation in thermal spray coating process by investigating dynamics of air entrapment
Authors: Shukla R.K.
Journal: Surface and Coatings Technology
DOI: 10.1016/j.surfcoat.2019.124972
Published: 25 November 2019
|
Type: Article
Keywords: Entrapped air dynamics | Free surface | High-speed impact | Metal droplet | Solidification | Wettability
Volume: 378
Pages:
ISSN/eISSN: 02578972/
|
Citations: 26
Article #: 124972
Source ID: 24537
Funding:
|
| 697 |
Title: A-TIG welding process for enhanced-penetration in Duplex stainless-steel: effect of activated fluxes
Authors: Tathgir S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2019.1666990
Published: 18 November 2019
|
Type: Article
Keywords: Manufacturing | Marangoni | measurements | microstructure | oxidation | Peclet | weldability
Volume: 34
Pages: 1659-1670
ISSN/eISSN: 10426914/15322475
|
Citations: 29
Article #:
Source ID: 21054
Funding:
|
| 698 |
Title: An erosion and corrosion study on thermally sprayed WC-Co-Cr powder synergized with Mo2C/Y2O3/ZrO2 feedstock powders
Authors: Singh J.
Journal: Wear
DOI: 10.1016/j.wear.2019.01.082
Published: 15 November 2019
|
Type: Article
Keywords: Cermet coatings | Corrosion | HVOF thermal spraying | Slurry erosion | Super-duplex stainless steel (SDSS) 2507 | WC-Co-Cr powder
Volume: 438-439
Pages:
ISSN/eISSN: 00431648/
|
Citations: 53
Article #: 102751
Source ID: 22156
Funding:
|
| 699 |
Title: Performance study of an improved basin type vertical multiple effect diffusion solar still
Authors: Kaushal A.
Journal: International Journal of Green Energy
DOI: 10.1080/15435075.2019.1671409
Published: 14 November 2019
|
Type: Article
Keywords: cumulative efficiency | floating wick | heat recovery | Solar distillation | vertical multiple effect
Volume: 16
Pages: 1343-1352
ISSN/eISSN: 15435075/15435083
|
Citations: 8
Article #:
Source ID: 4700151730
Funding: Department of Science and Technology, Government of Kerala
|
| 700 |
Title: Biodiesel production from Terminalia bellerica using eggshell-based green catalyst: An optimization study with response surface methodology
Authors: Marwaha A.
Journal: Energy Reports
DOI: 10.1016/j.egyr.2019.10.022
Published: November 2019
|
Type: Article
Keywords: Biodiesel | Box–Behnken | Eggshell | Fuel | RSM | Terminalia bellerica
Volume: 5
Pages: 1580-1588
ISSN/eISSN: /23524847
|
Citations: 56
Article #:
Source ID: 21100389511
Funding: Ministry of New and Renewable Energy India
|
| 701 |
Title: Mechanical dry particle coating on cohesive pharmaceutical powders for improving flowability - A review
Authors: Sharma R.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2019.08.009
Published: November 2019
|
Type: Review
Keywords: Cohesion | Dry coating | Flowability | Guest particles | van der Waals forces
Volume: 356
Pages: 458-479
ISSN/eISSN: 00325910/1873328X
|
Citations: 53
Article #:
Source ID: 13717
Funding: Department of Mechanical Engineering, College of Engineering, Michigan State University
|
| 702 |
Title: Experimental and numerical analysis of a nonlinear pin fin with temperature dependent properties and disparate boundary conditions
Authors: Singh S.
Journal: International Communications in Heat and Mass Transfer
DOI: 10.1016/j.icheatmasstransfer.2019.104313
Published: November 2019
|
Type: Article
Keywords: Cooling electronics | Heat transfer | Non-linear pin fin
Volume: 108
Pages:
ISSN/eISSN: 07351933/
|
Citations: 21
Article #: 104313
Source ID: 20422
Funding:
|
| 703 |
Title: Modelling pressure drop in bends for pneumatic conveying of fine powders
Authors: Sharma A.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2019.08.047
Published: November 2019
|
Type: Article
Keywords: Bend diameter | Bend loss | Fine powders | Pneumatic conveying | Rb/D ratio
Volume: 356
Pages: 273-283
ISSN/eISSN: 00325910/1873328X
|
Citations: 10
Article #:
Source ID: 13717
Funding:
|
| 704 |
Title: Hygrothermal effects on mechanical joints prepared from fiber reinforced plastic nanocomposites
Authors: Singh K.
Journal: Journal of Composite Materials
DOI: 10.1177/0021998319848479
Published: 1 November 2019
|
Type: Article
Keywords: Bolt joint | hygrothermal degradation | nanoclay | regression analysis | scanning electron microscopy | torque
Volume: 53
Pages: 3875-3891
ISSN/eISSN: 00219983/1530793X
|
Citations: 8
Article #:
Source ID: 21140
Funding: Bhabha Atomic Research Centre
|
| 705 |
Title: Magnetorheological finishing of micro-punches for enhanced performance of micro-extrusion process
Authors: Singh M.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2019.1689262
Published: 26 October 2019
|
Type: Article
Keywords: extrusion | finishing | friction | Magnetorheological | micro | processes | punches | roughness | surface
Volume: 34
Pages: 1646-1657
ISSN/eISSN: 10426914/15322475
|
Citations: 20
Article #:
Source ID: 21054
Funding:
|
| 706 |
Title: Multimaterial printing and characterization for mechanical and surface properties of functionally graded prototype
Authors: Kumar S.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406219867984
Published: 1 October 2019
|
Type: Article
Keywords: fractured surface analysis | functionally graded | modulus of toughness | Multimaterial | surface rendering | tensile properties
Volume: 233
Pages: 6741-6753
ISSN/eISSN: 09544062/20412983
|
Citations: 43
Article #:
Source ID: 20407
Funding:
|
| 707 |
Title: Analysis of cracked functionally graded material plates using XIGA based on generalized higher-order shear deformation theory
Authors: Singh S.K.
Journal: Composite Structures
DOI: 10.1016/j.compstruct.2019.111038
Published: 1 October 2019
|
Type: Article
Keywords: Cracked FGM plate | GHSDT | NURBS | SIF | XIGA
Volume: 225
Pages:
ISSN/eISSN: 02638223/
|
Citations: 39
Article #: 111038
Source ID: 15063
Funding: Ministry of Human Resource Development
|
| 708 |
Title: Thermogenesis mitigation using ultrasonic actuation during bone grinding: a hybrid approach using CEM43°C and Arrhenius model
Authors: Babbar A.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-019-1913-6
Published: 1 October 2019
|
Type: Article
Keywords: Arrhenius equations | Bone grinding | CEM43°C | Genetic algorithm | Infrared thermography | Ultrasonic
Volume: 41
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 38
Article #: 401
Source ID: 71359
Funding:
|
| 709 |
Title: Effect of cooling environment and welding speed on fatigue properties of friction stir welded Al-Mg-Cr alloy
Authors: Singh R.K.R.
Journal: International Journal of Fatigue
DOI: 10.1016/j.ijfatigue.2019.06.043
Published: October 2019
|
Type: Article
Keywords: Cooling environment | Fatigue crack growth rate | Friction stir welding | Residual stresses | Tensile strength
Volume: 127
Pages: 551-563
ISSN/eISSN: 01421123/
|
Citations: 33
Article #:
Source ID: 21105
Funding:
|
| 710 |
Title: Analysis of CNT reinforced polymer nanocomposite plate in the presence of discontinuities using XFEM
Authors: Negi A.
Journal: Theoretical and Applied Fracture Mechanics
DOI: 10.1016/j.tafmec.2019.102292
Published: October 2019
|
Type: Article
Keywords: CNTs | Crack growth | Halpin-Tsai | Holes | Inclusions | Polymer nanocomposite | SIF | XFEM
Volume: 103
Pages:
ISSN/eISSN: 01678442/
|
Citations: 24
Article #: 102292
Source ID: 14588
Funding:
|
| 711 |
Title: Bond graph approach for dynamic modelling of the biped robot and application to obstacle avoidance
Authors: Singh R.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-019-1957-7
Published: 1 October 2019
|
Type: Article
Keywords: Biped robot | Bond graph | Obstacle avoidance | Static obstacle
Volume: 41
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 13
Article #: 444
Source ID: 71359
Funding:
|
| 712 |
Title: Solar-PV & fuel cell based hybrid power solution for remote locations
Authors: Singla M.K.
Journal: International Journal of Engineering and Advanced Technology
DOI: 10.35940/ijeat.A9393.109119
Published: October 2019
|
Type: Article
Keywords: Fuel cell | Proton flow battery | Renewable energy harnessing | Solar energy | Solar irradiance
Volume: 9
Pages: 861-867
ISSN/eISSN: /22498958
|
Citations: 11
Article #:
Source ID: 21100899502
Funding:
|
| 713 |
Title: Fault detection, isolation and reconfiguration of a bipedal-legged robot
Authors: Singh R.
Journal: Simulation
DOI: 10.1177/0037549718803716
Published: 1 October 2019
|
Type: Article
Keywords: bond graph | experiment | fault detection | isolation and reconfiguration | Legged robot | oscillating cylinder mechanism | prismatic leg | simulation
Volume: 95
Pages: 955-977
ISSN/eISSN: 00375497/17413133
|
Citations: 7
Article #:
Source ID: 14452
Funding:
|
| 714 |
Title: Fault detection, isolation and reconfiguration of a bipedal-legged robot
Authors: Singh R.
Journal: Simulation
DOI: 10.1177/0037549718803716
Published: 1 October 2019
|
Type: Article
Keywords: bond graph | experiment | fault detection | isolation and reconfiguration | Legged robot | oscillating cylinder mechanism | prismatic leg | simulation
Volume: 95
Pages: 955-977
ISSN/eISSN: 00375497/17413133
|
Citations: 7
Article #:
Source ID: 14452
Funding:
|
| 715 |
Title: An experimental study on head loss characteristics of pipe bends for flow of coal–water slurry at high solid concentration
Authors: Singh J.P.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/0954408919844928
Published: 1 October 2019
|
Type: Article
Keywords: Coal–water slurry | head loss | pipe bend | r/D ratio | specific energy consumption
Volume: 233
Pages: 1151-1161
ISSN/eISSN: 09544089/20413009
|
Citations: 6
Article #:
Source ID: 20408
Funding: Department of Science and Technology, Government of Kerala
|
| 716 |
Title: Tensile behaviour and characterization of epoxy-clay-poly (ethylene terephthalate) nanocomposites
Authors: Raturi M.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab43e9
Published: 25 September 2019
|
Type: Article
Keywords: alkaline treatment | nanocomposites | PET | response surface methodology | SEM | tensile strength
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 12
Article #: 115014
Source ID: 21100432452
Funding:
|
| 717 |
Title: Salinity gradient solar pond construction and maintenance
Authors: Mahizan S.
Journal: Aip Conference Proceedings
DOI: 10.1063/1.5126590
Published: 18 September 2019
|
Type: Conference Paper
Keywords:
Volume: 2157
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 0
Article #: 020055
Source ID: 26916
Funding: Universiti Teknologi MARA
|
| 718 |
Title: Investigations of polylactic acid reinforced composite feedstock filaments for multimaterial three-dimensional printing applications
Authors: Kumar S.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406219861665
Published: 1 September 2019
|
Type: Article
Keywords: composite | melt flow rate | peak elongation | Polylactic acid | polyvinyl chloride | porosity | Shore D hardness | thermal and magnetic behavior | wood powder
Volume: 233
Pages: 5953-5965
ISSN/eISSN: 09544062/20412983
|
Citations: 57
Article #:
Source ID: 20407
Funding:
|
| 719 |
Title: Bond Graph Modelling and Simulation of Planar Quadruple Robot with Different Gaits
Authors: Soharu G.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-019-03766-1
Published: 1 September 2019
|
Type: Article
Keywords: Bond graph modelling | Gaits | Locomotion | Planar model | Quadruple robot
Volume: 44
Pages: 7385-7397
ISSN/eISSN: 2193567X/21914281
|
Citations: 6
Article #:
Source ID: 13951
Funding:
|
| 720 |
Title: Workspace analysis and trajectory tracking of a planar hybrid manipulator with ball screw feed drive
Authors: Arora R.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-019-1878-5
Published: 1 September 2019
|
Type: Article
Keywords: Ball screw | Bond graph | Hybrid manipulator | Target reaching | Trajectory tracking | Workspace analysis
Volume: 41
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 4
Article #: 378
Source ID: 71359
Funding:
|
| 721 |
Title: A Reduced Graphene Oxide Electrode For Solid-State Hydrogen Storage Within A Proton Battery
Authors: Jindal H.
Journal: International Journal of Mechanical and Production Engineering Research and Development
DOI: 10.24247/ijmperdaug201966
Published: 31 August 2019
|
Type: Article
Keywords: Fuel Cell Application and Proton Battery | Graphene | Hydrogen Storage | Reduced Graphene Oxide
Volume: 9
Pages: 659-670
ISSN/eISSN: 22496890/22498001
|
Citations: 2
Article #: IJMPERDAUG201966
Source ID: 21100814505
Funding:
|
| 722 |
Title: Impact of copper-titanium carbide tooltip on machined surface integrity during electrical discharge machining of EN31 steel
Authors: Walia A.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab3ac4
Published: 28 August 2019
|
Type: Article
Keywords: crack width | electrical discharge machining | material removal mechanism | microhardness | surface integrity | surface roughness | volume of void
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 7
Article #: 106582
Source ID: 21100432452
Funding:
|
| 723 |
Title: Improvements in the Rheological Characteristics of the Complex Coal-Water Suspension Using Gasification Derived Waste Water
Authors: Singh H.
Journal: Journal of Physics Conference Series
DOI: 10.1088/1742-6596/1276/1/012066
Published: 23 August 2019
|
Type: Conference Paper
Keywords: Coal water suspension | Gasification waste water | Rheological characteristics | Settling characteristics
Volume: 1276
Pages:
ISSN/eISSN: 17426588/17426596
|
Citations: 4
Article #: 012066
Source ID: 130053
Funding:
|
| 724 |
Title: Investigation of Various Parameters of Dual Fuel Engine Using Biomass Waste - Producer Gas as an Induced Fuel
Authors: Singh H.
Journal: Journal of Physics Conference Series
DOI: 10.1088/1742-6596/1276/1/012062
Published: 23 August 2019
|
Type: Conference Paper
Keywords: Biomass gasification | Dual fuel engine | Economic analysis | Emission characteristics | Noise characteristics | Performance characteristics
Volume: 1276
Pages:
ISSN/eISSN: 17426588/17426596
|
Citations: 1
Article #: 012062
Source ID: 130053
Funding:
|
| 725 |
Title: Magnetorheological nano-finishing of tube extrusion punch for improving its functional applications in press machine
Authors: Chana A.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-019-03633-1
Published: 19 August 2019
|
Type: Article
Keywords: Extrusion punch | H13 die steel | Magnetorheological polishing fluid | Surface roughness
Volume: 103
Pages: 2037-2052
ISSN/eISSN: 02683768/14333015
|
Citations: 13
Article #:
Source ID: 20428
Funding:
|
| 726 |
Title: Corrigendum: On processing of Ni-Cr3C2 based functionally graded clads through microwave heating (MaterMaterials Research Express (2018)5(066405) DOI: 10.1088/2053-1591/aac805)
Authors: Kaushal S.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab3747
Published: 9 August 2019
|
Type: Erratum
Keywords:
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 1
Article #: 109501
Source ID: 21100432452
Funding:
|
| 727 |
Title: Experimental Evaluation of High Temperature Corrosion Performance of 75Ni25Cr Coated and Bare 347H SS in Air and Simulated Husk Fired Boiler Environment
Authors: Gada H.
Journal: Journal of Physics Conference Series
DOI: 10.1088/1742-6596/1240/1/012129
Published: 7 August 2019
|
Type: Conference Paper
Keywords: 75Ni25Cr | D-gun | High temperature corrosion
Volume: 1240
Pages:
ISSN/eISSN: 17426588/17426596
|
Citations: 3
Article #: 012129
Source ID: 130053
Funding:
|
| 728 |
Title: Research article: The impact of academia-industry collaboration on core academic activities: Assessing the latent dimensions
Authors: Bhullar S.
Journal: Technological Forecasting and Social Change
DOI: 10.1016/j.techfore.2019.04.021
Published: August 2019
|
Type: Article
Keywords:
Volume: 145
Pages: 1-11
ISSN/eISSN: 00401625/
|
Citations: 31
Article #:
Source ID: 14704
Funding:
|
| 729 |
Title: Optimization of Compressor Mounting Bracket of a Passenger Car
Authors: Kalsi S.
Journal: Journal of the Institution of Engineers India Series C
DOI: 10.1007/s40032-018-0453-7
Published: 1 August 2019
|
Type: Article
Keywords: CAE | Compressor mounting bracket | Dynamic analysis | Optimization | Static analysis
Volume: 100
Pages: 675-691
ISSN/eISSN: 22500545/22500553
|
Citations: 3
Article #:
Source ID: 21100831410
Funding:
|
| 730 |
Title: Comparative analysis of chipping mechanics of float glass during rotary ultrasonic drilling and conventional drilling: For multi-shaped tools
Authors: Sharma A.
Journal: Machining Science and Technology
DOI: 10.1080/10910344.2019.1575402
Published: 4 July 2019
|
Type: Article
Keywords: Chipping | conventional drilling | float glass | rotary ultrasonic drilling
Volume: 23
Pages: 547-568
ISSN/eISSN: 10910344/15322483
|
Citations: 40
Article #:
Source ID: 21223
Funding:
|
| 731 |
Title: Improved magnetorheological finishing process with rectangular core tip for external cylindrical surfaces
Authors: Singh M.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2019.1594272
Published: 4 July 2019
|
Type: Article
Keywords: core | density | effectiveness | fluid | flux | Magnetorheological | nano-finishing | roughness | surface | tool
Volume: 34
Pages: 1049-1061
ISSN/eISSN: 10426914/15322475
|
Citations: 27
Article #:
Source ID: 21054
Funding:
|
| 732 |
Title: Low Grade Heat Power Generation using Thermoelectric Generator
Authors: Julaihie K.
Journal: Iop Conference Series Earth and Environmental Science
DOI: 10.1088/1755-1315/268/1/012134
Published: 2 July 2019
|
Type: Conference Paper
Keywords: Low Grade Heat | Power Generation | Thermoelectric Generator
Volume: 268
Pages:
ISSN/eISSN: 17551307/17551315
|
Citations: 1
Article #: 012134
Source ID: 19900195068
Funding:
|
| 733 |
Title: Effect of compression ratio on combustion, performance, and emission characteristics of compression ignition engine fueled with palm (B20)biodiesel blend
Authors: Rosha P.
Journal: Energy
DOI: 10.1016/j.energy.2019.04.185
Published: 1 July 2019
|
Type: Article
Keywords: Biodiesel | Blend | Combustion | Compression ignition | Diesel
Volume: 178
Pages: 676-684
ISSN/eISSN: 03605442/
|
Citations: 127
Article #:
Source ID: 29348
Funding: Ministry of New and Renewable Energy India
|
| 734 |
Title: Effect of mixing parameters, postcuring, and stoichiometry on mechanical properties of fiber reinforced epoxy–clay nanocomposites
Authors: Sharma B.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/1464420717752023
Published: 1 July 2019
|
Type: Article
Keywords: Glass fiber | mechanical properties | nanocomposites | process parameters | residual stresses
Volume: 233
Pages: 1363-1374
ISSN/eISSN: 14644207/20413076
|
Citations: 11
Article #:
Source ID: 20971
Funding: Defence Research and Development Organisation
|
| 735 |
Title: Trends so far in hydrogen fuel cell technology: State of the art
Authors: Singla M.K.
Journal: International Journal of Advanced Trends in Computer Science and Engineering
DOI: 10.30534/ijatcse/2019/23842019
Published: July 2019
|
Type: Article
Keywords: Clean fuel | Fuel cell efficiency | Fuel cell technology | Fuel cell types | Hydrogen energy
Volume: 8
Pages: 1146-1155
ISSN/eISSN: /22783091
|
Citations: 11
Article #:
Source ID: 21100896268
Funding:
|
| 736 |
Title: Object Detection and Gesture Control of Four-Wheel Mobile Robot
Authors: Jain M.
Journal: Proceedings of the 4th International Conference on Communication and Electronics Systems Icces 2019
DOI: 10.1109/ICCES45898.2019.9002323
Published: July 2019
|
Type: Conference Paper
Keywords: accelerometer | ardiuno nano | four-wheel mobile robot | gesture control | object detection
Volume:
Pages: 303-308
ISSN/eISSN: /
|
Citations: 9
Article #: 9002323
Source ID: 21100967343
Funding:
|
| 737 |
Title: A multipoint tool positioning method for five-axis machining in the region of two intersecting tensor product Bézier surfaces
Authors: Sharma S.K.
Journal: International Journal of Machine Tools and Manufacture
DOI: 10.1016/j.ijmachtools.2019.04.007
Published: July 2019
|
Type: Article
Keywords: Bézier surface | CNC machining | Five-axis machining | Multipoint machining
Volume: 142
Pages: 42-53
ISSN/eISSN: 08906955/
|
Citations: 8
Article #:
Source ID: 19164
Funding:
|
| 738 |
Title: Application of levenberg marquardt algorithm for short term load forecasting: A theoretical investigation
Authors: Singla M.K.
Journal: Pertanika Journal of Science and Technology
DOI:
Published: July 2019
|
Type: Article
Keywords: Electrical energy | Feed forward network | Levenberg marquardt | Neural network | Short term load forecasting
Volume: 27
Pages: 1227-1245
ISSN/eISSN: 01287680/22318526
|
Citations: 3
Article #:
Source ID: 19700188314
Funding:
|
| 739 |
Title: Design of Knee Exoskeleton using Electromyography Sensor
Authors: Jain P.
Journal: Proceedings of the 4th International Conference on Communication and Electronics Systems Icces 2019
DOI: 10.1109/ICCES45898.2019.9002239
Published: July 2019
|
Type: Conference Paper
Keywords: EMG sensor | four bar mechanism | joint angle | joint torque | knee exoskeleton | linear actuator | rehabilitation
Volume:
Pages: 1246-1251
ISSN/eISSN: /
|
Citations: 3
Article #: 9002239
Source ID: 21100967343
Funding: Thapar Institute of Engineering and Technology
|
| 740 |
Title: Multi-shaped tool wear study during rotary ultrasonic drilling and conventional drilling for amorphous solid
Authors: Sharma A.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/0954408918776724
Published: 1 June 2019
|
Type: Article
Keywords: conventional drilling | micro-study | multi-shaped tools | Rotary ultrasonic drilling | tool wear
Volume: 233
Pages: 551-560
ISSN/eISSN: 09544089/20413009
|
Citations: 29
Article #:
Source ID: 20408
Funding:
|
| 741 |
Title: Catalytic reforming of synthetic biogas for hydrogen enrichment over Ni supported on ZnO[sbnd]CeO2 mixed catalyst
Authors: Rosha P.
Journal: Biomass and Bioenergy
DOI: 10.1016/j.biombioe.2019.04.013
Published: June 2019
|
Type: Article
Keywords: Biogas | Catalyst | Dry reforming | Hydrogen production | Oxygen | Syngas
Volume: 125
Pages: 70-78
ISSN/eISSN: 09619534/18732909
|
Citations: 26
Article #:
Source ID: 28810
Funding: Ministry of New and Renewable Energy India
|
| 742 |
Title: Experimental investigation of basin type solar still havingparaffin wax in the Basin
Authors: Thakur V.
Journal: International Journal of Mechanical and Production Engineering Research and Development
DOI:
Published: June 2019
|
Type: Article
Keywords: Desalination | Paraffin Wax & Temperature Distribution | Productivity | Solar Still
Volume: 9
Pages: 958-965
ISSN/eISSN: 22496890/22498001
|
Citations: 2
Article #:
Source ID: 21100814505
Funding:
|
| 743 |
Title: Microwave processing and characterization of nickel powder based metal matrix composite castings
Authors: Singh S.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab2138
Published: 24 May 2019
|
Type: Article
Keywords: characterization | in-situ melting | metal matrix composites | microwaves | powder casting | tensile strength
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 15
Article #: 0865B1
Source ID: 21100432452
Funding: Department of Science and Technology, Government of Kerala
|
| 744 |
Title: Rotary ultrasonic milling of C/SiC composites fabricated using chemical vapor infiltration and needling technique
Authors: Babbar A.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab1bf7
Published: 8 May 2019
|
Type: Article
Keywords: composites | CVI | density | milling | tool wear | ultrasonic
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 35
Article #: 085607
Source ID: 21100432452
Funding:
|
| 745 |
Title: Erosion wear performance of Ni-Cr-O and NiCrBSiFe-WC(Co) composite coatings deposited by HVOF technique
Authors: Singh J.
Journal: Industrial Lubrication and Tribology
DOI: 10.1108/ILT-04-2018-0149
Published: 7 May 2019
|
Type: Article
Keywords: Coatings | Erosion wear | HVOF coating | Stainless steel
Volume: 71
Pages: 610-619
ISSN/eISSN: 00368792/
|
Citations: 45
Article #:
Source ID: 20389
Funding:
|
| 746 |
Title: Study on role of particle shape in erosion wear of austenitic steel using image processing analysis technique
Authors: Singh J.
Journal: Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology
DOI: 10.1177/1350650118794698
Published: 1 May 2019
|
Type: Article
Keywords: austenitic steel | circularity factor | erosion wear | image processing technique | particle shape | Slurry pump
Volume: 233
Pages: 712-725
ISSN/eISSN: 13506501/2041305X
|
Citations: 48
Article #:
Source ID: 20410
Funding:
|
| 747 |
Title: Performance investigation of magnetorheological finishing of rolls surface in cold rolling process
Authors: Singh M.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2019.04.007
Published: May 2019
|
Type: Article
Keywords: Cold rolling rolls | Magnetorheological finishing | Process performance | Response surface methodology | Surface roughness
Volume: 41
Pages: 315-329
ISSN/eISSN: 15266125/
|
Citations: 37
Article #:
Source ID: 27677
Funding:
|
| 748 |
Title: Effect of elevated temperatures and applied pressure on the tribological properties of LM30/sillimanite aluminium alloy composites
Authors: Sharma S.
Journal: Journal of Composite Materials
DOI: 10.1177/0021998318805203
Published: 1 May 2019
|
Type: Article
Keywords: coefficient of thermal expansion | elevated temperatures | Sillimanite | wear and friction
Volume: 53
Pages: 1521-1539
ISSN/eISSN: 00219983/1530793X
|
Citations: 19
Article #:
Source ID: 21140
Funding: Bangladesh Council of Scientific and Industrial Research
|
| 749 |
Title: Experimental heat transfer analysis of Copper oxide nanofluids through a straight tube
Authors: Singh P.
Journal: International Journal of Advanced Trends in Computer Science and Engineering
DOI: 10.30534/ijatcse/2019/24832019
Published: May-June 2019
|
Type: Article
Keywords: Copper oxide nanofluid | Laminar flow conditions | Nusselt number | Propylene glycol | Straight tube | Water
Volume: 8
Pages: 495-500
ISSN/eISSN: /22783091
|
Citations: 11
Article #:
Source ID: 21100896268
Funding: Department of Science and Technology, Ministry of Science and Technology
|
| 750 |
Title: Electrical load forecasting using machine learning
Authors: Singla M.
Journal: International Journal of Advanced Trends in Computer Science and Engineering
DOI: 10.30534/ijatcse/2019/45832019
Published: May-June 2019
|
Type: Article
Keywords: Electric load | Machine learning | Neural network | Neural network toolbox | Short term load forecasting
Volume: 8
Pages: 615-619
ISSN/eISSN: /22783091
|
Citations: 10
Article #:
Source ID: 21100896268
Funding:
|
| 751 |
Title: In situ investigations of microstructural changes during tensile deformation of AISI 304L stainless steels
Authors: Singh N.
Journal: Archives of Civil and Mechanical Engineering
DOI: 10.1016/j.acme.2019.02.009
Published: May 2019
|
Type: Article
Keywords: Austenitic stainless steel | Grain orientation | In situ | Strain induced martensite | Tensile deformation
Volume: 19
Pages: 672-679
ISSN/eISSN: 16449665/
|
Citations: 3
Article #:
Source ID: 14000156254
Funding:
|
| 752 |
Title: A multi-walled carbon nanotube electrode for renewable energy storage: An experimental investigation on cyclic charging and discharging
Authors: Kapoor D.
Journal: International Journal of Advanced Trends in Computer Science and Engineering
DOI: 10.30534/ijatcse/2019/27832019
Published: May-June 2019
|
Type: Article
Keywords: Multi walled carbon nano tube (MWCNT) | Polymer electrolyte membrane fuel cell (PEMFC) | Proton battery | Renewable energy storage
Volume: 8
Pages: 513-518
ISSN/eISSN: /22783091
|
Citations: 2
Article #:
Source ID: 21100896268
Funding:
|
| 753 |
Title: Investigation of T4 and T6 heat treatment on the wear properties of sillimanite reinforced LM30 aluminium alloy composites
Authors: Sharma S.
Journal: Wear
DOI: 10.1016/j.wear.2018.12.065
Published: 30 April 2019
|
Type: Article
Keywords: Heat-treatment | LM30 aluminium composites | Sillimanite | T4 and T6
Volume: 426-427
Pages: 27-36
ISSN/eISSN: 00431648/
|
Citations: 36
Article #:
Source ID: 22156
Funding: Council of Scientific and Industrial Research, India
|
| 754 |
Title: Analysis of surface finishing mechanism in a newly developed rotational magnetorheological honing process for its productivity improvement
Authors: Paswan S.K.
Journal: Wear
DOI: 10.1016/j.wear.2019.01.001
Published: 30 April 2019
|
Type: Article
Keywords: Ferromagnetic | Honing | Magnetic field | Magnetorheological finishing | Surface finishing | Surface roughness | Wear mechanism
Volume: 426-427
Pages: 68-82
ISSN/eISSN: 00431648/
|
Citations: 32
Article #:
Source ID: 22156
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 755 |
Title: Obstacle Avoidance of Mobile Robot using Fuzzy Logic and Hybrid Obstacle Avoidance Algorithm
Authors: Singh R.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/517/1/012009
Published: 26 April 2019
|
Type: Conference Paper
Keywords: bond graph | fuzzy logic controller | Hybrid obstacle avoidance | mobile robot
Volume: 517
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 13
Article #: 012009
Source ID: 19700200831
Funding:
|
| 756 |
Title: Robust LQR Based ANFIS Control of x-z Inverted Pendulum
Authors: Chawla I.
Journal: Proceedings 2019 Amity International Conference on Artificial Intelligence Aicai 2019
DOI: 10.1109/AICAI.2019.8701333
Published: 26 April 2019
|
Type: Conference Paper
Keywords: ANFIS controller | Robustness | Stabilization | X-z Inverted pendulum
Volume:
Pages: 818-823
ISSN/eISSN: /
|
Citations: 10
Article #: 8701333
Source ID: 21100905542
Funding:
|
| 757 |
Title: CFD modeling of erosion wear in pipe bend for the flow of bottom ash suspension
Authors: Singh J.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2017.1364816
Published: 3 April 2019
|
Type: Article
Keywords: Bottom ash | computational fluid dynamics (CFD) | discrete phase modeling (DPM) | erosion wear | k–ε turbulence model | pipe bend
Volume: 37
Pages: 275-285
ISSN/eISSN: 02726351/15480046
|
Citations: 68
Article #:
Source ID: 13661
Funding: Department of Science and Technology, Government of Kerala
|
| 758 |
Title: On processing and flexural behaviour of functionally graded clads developed through microwave irradiation
Authors: Kaushal S.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab11ea
Published: 3 April 2019
|
Type: Article
Keywords: flexural strength | functionally graded clads | micro-hardness | microstructure | microwave heating
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 14
Article #: 076405
Source ID: 21100432452
Funding:
|
| 759 |
Title: Biodiesel production from waste cooking oil using heterogeneous catalysts and its operational characteristics on variable compression ratio CI engine
Authors: Kataria J.
Journal: Journal of the Energy Institute
DOI: 10.1016/j.joei.2018.01.008
Published: April 2019
|
Type: Article
Keywords: Biodiesel | Heterogeneous catalyst | Variable compression ratio | Waste cooking oil | Zinc doped calcium oxide
Volume: 92
Pages: 275-287
ISSN/eISSN: 17439671/17460220
|
Citations: 118
Article #:
Source ID: 58130
Funding:
|
| 760 |
Title: A novel magnetorheological gear profile finishing with high shape accuracy
Authors: Yadav R.D.
Journal: International Journal of Machine Tools and Manufacture
DOI: 10.1016/j.ijmachtools.2019.02.001
Published: April 2019
|
Type: Article
Keywords: DIN standard | Fine finishing | Gear shape accuracy | Gear tooth profile | Magnetic field | Magnetorheological fluid | Surface roughness
Volume: 139
Pages: 75-92
ISSN/eISSN: 08906955/
|
Citations: 49
Article #:
Source ID: 19164
Funding:
|
| 761 |
Title: Development and characterization of microwave processed cast iron joint
Authors: Singh S.
Journal: Engineering Science and Technology an International Journal
DOI: 10.1016/j.jestch.2018.10.012
Published: April 2019
|
Type: Article
Keywords: Joining | Microhardness | Microstructure | Microwave heating | Porosity measurement
Volume: 22
Pages: 569-577
ISSN/eISSN: /22150986
|
Citations: 43
Article #:
Source ID: 21100806003
Funding:
|
| 762 |
Title: Hydrogen enrichment of biogas via dry and autothermal-dry reforming with pure nickel (Ni) nanoparticle
Authors: Rosha P.
Journal: Energy
DOI: 10.1016/j.energy.2019.02.006
Published: 1 April 2019
|
Type: Article
Keywords: Biogas | Dry reforming | Hydrogen production | Nickel nanoparticle | Syngas
Volume: 172
Pages: 733-739
ISSN/eISSN: 03605442/
|
Citations: 37
Article #:
Source ID: 29348
Funding: Ministry of New and Renewable Energy India
|
| 763 |
Title: Processing of Ni–WC–Cr 3 C 2 -based metal matrix composite cladding on SS-316L substrate through microwave irradiation
Authors: Kaushal S.
Journal: Journal of Composite Materials
DOI: 10.1177/0021998318794846
Published: 1 April 2019
|
Type: Article
Keywords: characterization | metal matrix composite clad | microhardness | Microwave heating
Volume: 53
Pages: 1023-1032
ISSN/eISSN: 00219983/1530793X
|
Citations: 20
Article #:
Source ID: 21140
Funding: Science and Engineering Research Board
|
| 764 |
Title: Wear Resistance Improvement of Austenitic 316 L Steel by Microwave-Processed Composite Clads
Authors: Kaushal S.
Journal: Journal of Tribology
DOI: 10.1115/1.4042273
Published: 1 April 2019
|
Type: Article
Keywords:
Volume: 141
Pages:
ISSN/eISSN: 07424787/15288897
|
Citations: 16
Article #: 041605
Source ID: 17014
Funding:
|
| 765 |
Title: Hydrogen production and subsequent adsorption/desorption process within a modified unitized regenerative fuel cell
Authors: Kapoor D.
Journal: Processes
DOI: 10.3390/pr7040238
Published: 1 April 2019
|
Type: Article
Keywords: Hydrogen energy | Multiwalled carbon nanotube | Proton battery | Solid-state hydrogen storage | Unitized regenerative fuel cell
Volume: 7
Pages:
ISSN/eISSN: /22279717
|
Citations: 10
Article #: 238
Source ID: 21100838131
Funding:
|
| 766 |
Title: Enhanced thermal resistance of rammed earth blocks with recycled industry by-products
Authors: Jain D.
Journal: International Journal of Thermal Sciences
DOI: 10.1016/j.ijthermalsci.2019.01.017
Published: April 2019
|
Type: Article
Keywords: Finite element analysis | Mechanical behaviour | Rammed earth | Recycled industry by-products | Structure-property relationship | Thermal insulation
Volume: 138
Pages: 447-458
ISSN/eISSN: 12900729/
|
Citations: 7
Article #:
Source ID: 13761
Funding:
|
| 767 |
Title: Mechanisms for enhanced impact strength of epoxy based nanocomposites reinforced with silicate platelets
Authors: Nanda T.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab1023
Published: 29 March 2019
|
Type: Article
Keywords: crack deflection | crack pinning | epoxy | impact strength | microvoids | nano-clay | nanocomposites
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 28
Article #: 065061
Source ID: 21100432452
Funding:
|
| 768 |
Title: Neurosurgical bone grinding
Authors: Babbar A.
Journal: Biomanufacturing
DOI: 10.1007/978-3-030-13951-3_7
Published: 20 March 2019
|
Type: Book Chapter
Keywords: Burr | Grinding | Necrosis | Temperature
Volume:
Pages: 137-155
ISSN/eISSN: /
|
Citations: 28
Article #:
Source ID: 21100944581
Funding:
|
| 769 |
Title: Multi-objective optimisation of electrical discharge machining for Inconel 825 using Taguchi-fuzzy approach
Authors: Payal H.
Journal: International Journal of Information Technology Singapore
DOI: 10.1007/s41870-018-0102-7
Published: 12 March 2019
|
Type: Article
Keywords: ANOVA | EDM | Metal removal rate | Multi-objective optimization | Surface roughness | Taguchi-fuzzy
Volume: 11
Pages: 97-105
ISSN/eISSN: 25112104/25112112
|
Citations: 20
Article #:
Source ID: 21101022413
Funding:
|
| 770 |
Title: Static and DC dynamic pull-in analysis of curled microcantilevers with a compliant support
Authors: Sharma A.
Journal: Microsystem Technologies
DOI: 10.1007/s00542-018-4046-4
Published: 4 March 2019
|
Type: Article
Keywords:
Volume: 25
Pages: 965-975
ISSN/eISSN: 09467076/
|
Citations: 18
Article #:
Source ID: 26738
Funding: Indian Institute of Technology Roorkee
|
| 771 |
Title: Synthesis, characterization, and bioactivity investigation of biomimetic biodegradable PLA scaffold fabricated by fused filament fabrication process
Authors: Singh D.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-019-1625-y
Published: 1 March 2019
|
Type: Article
Keywords: Additive manufacturing | Degradation | Polylactic acid | Scaffolds | Simulated body fluid
Volume: 41
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 86
Article #: 121
Source ID: 71359
Funding:
|
| 772 |
Title: Experimental and numerical investigations on the effect of alkaline hornification on the hydrothermal ageing of Agave natural fiber composites
Authors: Jain D.
Journal: International Journal of Heat and Mass Transfer
DOI: 10.1016/j.ijheatmasstransfer.2018.10.106
Published: March 2019
|
Type: Article
Keywords: Fiber pretreatment | Fick's law | Finite element analysis | Mass diffusion | Microstructural investigations | Natural fibers
Volume: 130
Pages: 431-439
ISSN/eISSN: 00179310/
|
Citations: 43
Article #:
Source ID: 20448
Funding:
|
| 773 |
Title: Analysis of the surface roughness for novel magnetorheological finishing of a typical blind hole workpiece
Authors: Sirwal S.A.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406218776036
Published: 1 March 2019
|
Type: Article
Keywords: blind holes | magnetic field | Magnetorheological fluids | mechanism | normal force | surface roughness
Volume: 233
Pages: 1541-1561
ISSN/eISSN: 09544062/20412983
|
Citations: 23
Article #:
Source ID: 20407
Funding:
|
| 774 |
Title: Crack growth analysis of carbon nanotube reinforced polymer nanocomposite using extended finite element method
Authors: Negi A.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406218776034
Published: 1 March 2019
|
Type: Article
Keywords: carbon nanotubes | center crack | Crack growth | edge crack | extended finite element method | Halpin–Tsai | polymer nanocomposites | stress intensity factor
Volume: 233
Pages: 1750-1770
ISSN/eISSN: 09544062/20412983
|
Citations: 21
Article #:
Source ID: 20407
Funding:
|
| 775 |
Title: Investigations to increase the failure load for joints in glass epoxy composites
Authors: Singh K.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406218779617
Published: 1 March 2019
|
Type: Article
Keywords: metal inserts | nanoclay | pin joints | progressive damage analysis | Woven glass fiber
Volume: 233
Pages: 2074-2090
ISSN/eISSN: 09544062/20412983
|
Citations: 15
Article #:
Source ID: 20407
Funding:
|
| 776 |
Title: Correlation between Lüders band formation and precipitation kinetics behaviour during the industrial processing of interstitial free high strength steels
Authors: Singh G.
Journal: Archives of Civil and Mechanical Engineering
DOI: 10.1016/j.acme.2018.12.009
Published: March 2019
|
Type: Article
Keywords: Batch-annealing | Continuous-annealing | IF-steels | IFHS-steels | Lüders band
Volume: 19
Pages: 469-483
ISSN/eISSN: 16449665/
|
Citations: 10
Article #:
Source ID: 14000156254
Funding:
|
| 777 |
Title: A study on heat transfer and pressure drop in a turbulent flow regime of thermally insulated and conducting nanofluids
Authors: Mehta K.
Journal: Journal of Nanofluids
DOI: 10.1166/jon.2019.1602
Published: March 2019
|
Type: Article
Keywords: Friction factor | Nanofluid | Nanoparticles | Nusselt number | Silver coated silica
Volume: 8
Pages: 490-499
ISSN/eISSN: 2169432X/
|
Citations: 9
Article #:
Source ID: 21100858674
Funding:
|
| 778 |
Title: An innovative design of a solar-wind hybrid system
Authors: Nijhawan P.
Journal: International Journal of Advanced Trends in Computer Science and Engineering
DOI: 10.30534/ijatcse/2019/15822019
Published: March-April 2019
|
Type: Article
Keywords: Hybrid system | Renewable energy harnessing | Solar energy | Sustainable development | Wind energy
Volume: 8
Pages: 203-207
ISSN/eISSN: /22783091
|
Citations: 9
Article #:
Source ID: 21100896268
Funding:
|
| 779 |
Title: A method for generating multiple solutions for multipoint five-axis tool positioning
Authors: Sharma S.K.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-018-2871-3
Published: 25 February 2019
|
Type: Article
Keywords: Bézier surface | CNC machining | DTM | Five-axis machining | Multipoint machining
Volume: 100
Pages: 2509-2520
ISSN/eISSN: 02683768/14333015
|
Citations: 6
Article #:
Source ID: 20428
Funding:
|
| 780 |
Title: An initial new approach for magnetorheological finishing of ferromagnetic internal cylindrical surfaces
Authors: Bedi T.S.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-018-2031-9
Published: 19 February 2019
|
Type: Article
Keywords: Cylindrical | Ferromagnetic | Honing | Internal surface | Magnetorheological finishing | MR fluid | Process | Roughness
Volume: 100
Pages: 1017-1030
ISSN/eISSN: 02683768/14333015
|
Citations: 12
Article #:
Source ID: 20428
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 781 |
Title: Improved design of magnetorheological honing tool based on finite element analysis and experimental examination of its performance
Authors: Grover V.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-017-1149-5
Published: 19 February 2019
|
Type: Article
Keywords: Carbonyl iron particles | Fluid | Honing | Magnetorheological | Polishing | Surface roughness
Volume: 100
Pages: 1067-1080
ISSN/eISSN: 02683768/14333015
|
Citations: 6
Article #:
Source ID: 20428
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 782 |
Title: Trajectory Tracking of 3D Hybrid Manipulator Through Human Hand Motion
Authors: Arora R.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-018-3323-y
Published: 12 February 2019
|
Type: Article
Keywords: 3-D hybrid manipulator | Bond graph | Dynamics | Human hand | Overwhelming control | Trajectory tracking
Volume: 44
Pages: 935-947
ISSN/eISSN: 2193567X/21914281
|
Citations: 4
Article #:
Source ID: 13951
Funding:
|
| 783 |
Title: Third generation of advanced high-strength steels: Processing routes and properties
Authors: Nanda T.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/1464420716664198
Published: 1 February 2019
|
Type: Review
Keywords: annealing | complex-phase | crash resistance | Dual-phase | ductility | formability | plasticity | quenching-partitioning | strength | third generation | twinning
Volume: 233
Pages: 209-238
ISSN/eISSN: 14644207/20413076
|
Citations: 66
Article #:
Source ID: 20971
Funding:
|
| 784 |
Title: Modeling of surface roughness in the magnetorheological cylindrical finishing process
Authors: Grover V.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/0954408917746354
Published: 1 February 2019
|
Type: Article
Keywords: Carbonyl iron particles | electromagnet | finite element analysis | magnetorheological cylindrical finishing process | silicon carbide abrasives
Volume: 233
Pages: 104-117
ISSN/eISSN: 09544089/20413009
|
Citations: 16
Article #:
Source ID: 20408
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 785 |
Title: Modeling and Optimization of HAZ Characteristics for Submerged Arc Welded High Strength Pipeline Steel
Authors: Sharma S.K.
Journal: Transactions of the Indian Institute of Metals
DOI: 10.1007/s12666-018-1495-5
Published: 1 February 2019
|
Type: Article
Keywords: Cooling time | Desirability | Heat affected zone | Heat input | Optimization | Submerged arc welding
Volume: 72
Pages: 439-454
ISSN/eISSN: 09722815/09751645
|
Citations: 14
Article #:
Source ID: 12149
Funding:
|
| 786 |
Title: Using solar energy for water purification through nanoparticles assisted evaporation
Authors: Ohri V.
Journal: Journal of Solar Energy Engineering Transactions of the ASME
DOI: 10.1115/1.4041099
Published: 1 February 2019
|
Type: Article
Keywords:
Volume: 141
Pages:
ISSN/eISSN: 01996231/15288986
|
Citations: 8
Article #: 4041099
Source ID: 13321
Funding:
|
| 787 |
Title: Fuzzy Logic Controller for Obstacle Avoidance of Mobile Robot
Authors: Singh R.
Journal: International Journal of Nonlinear Sciences and Numerical Simulation
DOI: 10.1515/ijnsns-2018-0038
Published: 1 February 2019
|
Type: Review
Keywords: bond graph | four-wheel mobile robot | fuzzy logic controller | obstacle avoidance | Simulink
Volume: 20
Pages:
ISSN/eISSN: 15651339/
|
Citations: 5
Article #:
Source ID: 23247
Funding:
|
| 788 |
Title: Investigation of factors influencing the performance of nanofluid-based direct absorption solar collector using Taguchi method
Authors: Bhalla V.
Journal: Journal of Thermal Analysis and Calorimetry
DOI: 10.1007/s10973-018-7721-x
Published: 29 January 2019
|
Type: Article
Keywords: Heat transfer | Nanofluid | Optical properties | Solar-weighted absorptivity | Taguchi orthogonal array
Volume: 135
Pages: 1493-1505
ISSN/eISSN: 13886150/15882926
|
Citations: 43
Article #:
Source ID: 26983
Funding: Indo-US Science and Technology Forum
|
| 789 |
Title: Parametric study of the energy efficiency of the HDH desalination unit integrated with nanofluid-based solar collector
Authors: Garg K.
Journal: Journal of Thermal Analysis and Calorimetry
DOI: 10.1007/s10973-018-7547-6
Published: 29 January 2019
|
Type: Article
Keywords: Dehumidification | Desalination | Humidification | Nanofluid | Solar energy
Volume: 135
Pages: 1465-1478
ISSN/eISSN: 13886150/15882926
|
Citations: 31
Article #:
Source ID: 26983
Funding: Department of Mechanical Engineering, University of Alberta
|
| 790 |
Title: Effect of heat-input and cooling-time on bead characteristics in SAW
Authors: Sharma S.K.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2018.1532578
Published: 25 January 2019
|
Type: Article
Keywords: arc | bead | cooling | geometry | heat | HSLA | preheating | RSM | steel | Submerged | temperature | time | welding
Volume: 34
Pages: 208-215
ISSN/eISSN: 10426914/15322475
|
Citations: 31
Article #:
Source ID: 21054
Funding:
|
| 791 |
Title: Enhanced tribological properties of SiC reinforced copper metal matrix composites
Authors: Somani N.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/aae6dc
Published: January 2019
|
Type: Article
Keywords: coefficient of friction | CuSiC composite | hardness | powder metallurgy | wear rate
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 41
Article #: 016549
Source ID: 21100432452
Funding:
|
| 792 |
Title: Modeling of erosion wear of sand water slurry flow through pipe bend using CFD
Authors: Singh V.
Journal: Journal of Applied Fluid Mechanics
DOI: 10.29252/JAFM.12.03.29199
Published: 2019
|
Type: Article
Keywords: Computational Fluid Dynamics (CFD) | Discrete Phase Model (DPM) | Erosion wear | Pipe bend
Volume: 12
Pages: 679-687
ISSN/eISSN: 17353572/17353645
|
Citations: 36
Article #:
Source ID: 15500154701
Funding:
|
| 793 |
Title: A novel electrochemical hydrogen storage-based proton battery for renewable energy storage
Authors: Oberoi A.S.
Journal: Energies
DOI: 10.3390/en12010082
Published: January 2019
|
Type: Article
Keywords: Double-layer capacitance | Electrochemical hydrogen storage | Polymer electrolyte membrane fuel cell | Porous activated carbon | Renewable energy
Volume: 12
Pages:
ISSN/eISSN: /19961073
|
Citations: 34
Article #: 82
Source ID: 62932
Funding:
|
| 794 |
Title: A novel electrochemical hydrogen storage-based proton battery for renewable energy storage
Authors: Oberoi A.S.
Journal: Energies
DOI: 10.3390/en12010082
Published: January 2019
|
Type: Article
Keywords: Double-layer capacitance | Electrochemical hydrogen storage | Polymer electrolyte membrane fuel cell | Porous activated carbon | Renewable energy
Volume: 12
Pages:
ISSN/eISSN: /19961073
|
Citations: 34
Article #: 82
Source ID: 62932
Funding:
|
| 795 |
Title: Thermo-mechanical aspects and temperature measurement techniques of bone grinding
Authors: Babbar A.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2020.01.497
Published: 2019
|
Type: Conference Paper
Keywords: Bone grinding | Burr | Infrared thermography | Osteonecrosis | Temperature
Volume: 33
Pages: 1458-1462
ISSN/eISSN: /22147853
|
Citations: 20
Article #:
Source ID: 21100370037
Funding:
|
| 796 |
Title: An assessment of residual stresses and micro-structure during single point incremental forming of commercially pure titanium used in biomedical applications
Authors: Kumar R.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2020.04.147
Published: 2019
|
Type: Conference Paper
Keywords: EBSD | Microstructure | Residual stresses | SPIF | Titanium grade-2 | X-ray diffraction
Volume: 28
Pages: 1261-1266
ISSN/eISSN: /22147853
|
Citations: 18
Article #:
Source ID: 21100370037
Funding:
|
| 797 |
Title: A comparative study of dry sliding wear behaviour of sillimanite and rutile reinforced LM27 aluminium alloy composites
Authors: Gupta R.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab61a2
Published: 2019
|
Type: Article
Keywords: aluminium matrix composites | coefficient of friction | minerals | nano-hardness | particles | wear test
Volume: 7
Pages:
ISSN/eISSN: /20531591
|
Citations: 16
Article #: 016540
Source ID: 21100432452
Funding:
|
| 798 |
Title: On process capability comparison of hybrid and multi blend PLA matrix composite: Magnetic and surface properties view point
Authors: Kumar S.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2019.12.212
Published: 2019
|
Type: Conference Paper
Keywords: Hybrid blend | Multi blend | PLA composite | Process capability | Twin screw extrusion
Volume: 28
Pages: 521-525
ISSN/eISSN: /22147853
|
Citations: 15
Article #:
Source ID: 21100370037
Funding:
|
| 799 |
Title: On multi response optimization and process capability analysis for surface properties of 3D printed functional prototypes of PVC reinforced with PP and HAp
Authors: Sharma R.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2020.01.092
Published: 2019
|
Type: Conference Paper
Keywords: Functional prototypes | HAp | Multi response optimization | PP | PVC
Volume: 28
Pages: 1115-1122
ISSN/eISSN: /22147853
|
Citations: 14
Article #:
Source ID: 21100370037
Funding:
|
| 800 |
Title: Justification of technology innovation implementation in Indian MSMEs using AHP
Authors: Singh D.
Journal: International Journal of Services and Operations Management
DOI: 10.1504/IJSOM.2019.099480
Published: 2019
|
Type: Article
Keywords: AHP | Manufacturing performance | MSMEs | Technology innovation
Volume: 32
Pages: 522-538
ISSN/eISSN: 17442370/17442389
|
Citations: 13
Article #:
Source ID: 4000148902
Funding:
|
| 801 |
Title: Development and performance evaluation of sintered tool tip while EDMing of hardened steel
Authors: Walia A.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab1c7a
Published: 2019
|
Type: Article
Keywords: cermet | electrode wear rate | EN31 | material removal | surface integrity | surface roughness | tool shape
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 11
Article #: 086520
Source ID: 21100432452
Funding:
|
| 802 |
Title: A novel investigation study on float glass hole surface integrity & tool wear using Chemical assisted Rotary ultrasonic machining
Authors: Sharma A.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2019.12.202
Published: 2019
|
Type: Conference Paper
Keywords: Chemical assisted | Chipping | Float glass | Hydrofluoric acid | Rotary ultrasonic machining | Tool wear
Volume: 26
Pages: 632-637
ISSN/eISSN: /22147853
|
Citations: 10
Article #:
Source ID: 21100370037
Funding:
|
| 803 |
Title: Toward human-powered lower limb exoskeletons: A review
Authors: Singla A.
Journal: Advances in Intelligent Systems and Computing
DOI: 10.1007/978-981-13-0761-4_75
Published: 2019
|
Type: Conference Paper
Keywords: Exoskeletons | Human power | Human-powered generators (HPGs) | Human-powered products (HPPs) | Lower limb
Volume: 741
Pages: 783-795
ISSN/eISSN: 21945357/
|
Citations: 9
Article #:
Source ID: 5100152904
Funding:
|
| 804 |
Title: Evaluation of high temperature oxidation performance of bare and coated T91 steel
Authors: Kumar M.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2019.12.232
Published: 2019
|
Type: Conference Paper
Keywords: Boiler | Corrosion | Cr3C2-NiCr | D-gun | Ferritic steel | WC-Co
Volume: 28
Pages: 620-624
ISSN/eISSN: /22147853
|
Citations: 9
Article #:
Source ID: 21100370037
Funding:
|
| 805 |
Title: Dynamic modeling of flexible robotic manipulators
Authors: Singla A.
Journal: Advances in Intelligent Systems and Computing
DOI: 10.1007/978-981-13-0761-4_78
Published: 2019
|
Type: Conference Paper
Keywords: Dynamic modeling | Finite element method | Flexible manipulator | Flexural modes | Lumped parameter method
Volume: 741
Pages: 819-834
ISSN/eISSN: 21945357/
|
Citations: 7
Article #:
Source ID: 5100152904
Funding:
|
| 806 |
Title: Efficiency and stiffness of the single lap bolt joints in glass epoxy composites
Authors: Singh J.
Journal: Defence Science Journal
DOI: 10.14429/dsj.69.13348
Published: 2019
|
Type: Article
Keywords: Bolt joint | Characteristic curve | Glass fibre | Joint efficiency | Tsai-Wu failure theory
Volume: 69
Pages: 280-289
ISSN/eISSN: 0011748X/0976464X
|
Citations: 6
Article #:
Source ID: 17294
Funding:
|
| 807 |
Title: Application of Nanofluid-Based Direct Absorption Solar Collector in Once-Through Multistage Flash Desalination System
Authors: Garg K.
Journal: Energy Environment and Sustainability
DOI: 10.1007/978-981-13-3302-6_16
Published: 2019
|
Type: Book Chapter
Keywords: Desalination | Multistage flash | Nanofluid | Once-through | Solar energy
Volume:
Pages: 519-535
ISSN/eISSN: 25228366/25228374
|
Citations: 6
Article #:
Source ID: 21101041971
Funding: Department of Mechanical Engineering, College of Engineering, Michigan State University
|
| 808 |
Title: Experimental investigation on thermal behavior of fly ash reinforced aluminium alloy (Al6061) hybrid composite
Authors: Kushnoore S.
Journal: Journal of Mechanical Engineering and Sciences
DOI: 10.15282/jmes.13.3.2019.23.0449
Published: 2019
|
Type: Article
Keywords: Al6061 and fly ash | Metal matrix composites | Microstructure | Thermal behavior
Volume: 13
Pages: 5588-5603
ISSN/eISSN: 22894659/22318380
|
Citations: 6
Article #:
Source ID: 21100398858
Funding:
|
| 809 |
Title: High temperature corrosion performance of ceria doped Cr3C2-NiCr coated superalloys under actual medical waste atmosphere
Authors: Ahuja L.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2019.12.228
Published: 2019
|
Type: Conference Paper
Keywords: Cr3C2-NiCr | D-gun | Incinerator | SEM | Superalloys | XRD
Volume: 28
Pages: 599-603
ISSN/eISSN: /22147853
|
Citations: 5
Article #:
Source ID: 21100370037
Funding:
|
| 810 |
Title: Nonpolynomial zigzag theories for random static analysis of laminated-composite and sandwich plates
Authors: Sahoo R.
Journal: AIAA Journal
DOI: 10.2514/1.J056519
Published: 2019
|
Type: Article
Keywords:
Volume: 57
Pages: 437-447
ISSN/eISSN: 00011452/
|
Citations: 5
Article #:
Source ID: 29964
Funding:
|
| 811 |
Title: Modelling creep response of a functionally graded rotating disc with exponential reinforcement gradient
Authors: Singh R.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2019.07.328
Published: 2019
|
Type: Conference Paper
Keywords: Composites | Creep | FGM | Modeling | Reinforcement gradient | Rotating disc
Volume: 18
Pages: 3891-3899
ISSN/eISSN: /22147853
|
Citations: 5
Article #:
Source ID: 21100370037
Funding:
|
| 812 |
Title: System identification of an inverted pendulum using adaptive neural fuzzy inference system
Authors: Chawla I.
Journal: Advances in Intelligent Systems and Computing
DOI: 10.1007/978-981-13-0761-4_77
Published: 2019
|
Type: Conference Paper
Keywords: ANFIS | Inverted pendulum | Nonlinear system | SIMO | System identification
Volume: 741
Pages: 809-817
ISSN/eISSN: 21945357/
|
Citations: 4
Article #:
Source ID: 5100152904
Funding:
|
| 813 |
Title: Development and performance analysis of semi-automatic movement setup for planar welding
Authors: Kumar V.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2019.1643470
Published: 2019
|
Type: Article
Keywords: Automatic | bond graph | GMAW | path | penetration | planar | SEM | welding
Volume: 34
Pages: 1251-1261
ISSN/eISSN: 10426914/15322475
|
Citations: 4
Article #:
Source ID: 21054
Funding:
|
| 814 |
Title: Effect of heat treatment on the wear behavior of zircon reinforced aluminium matrix composites
Authors: Sharma S.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/ab04ba
Published: 2019
|
Type: Article
Keywords: Heat-treatment | LM13 aluminium alloy composites | T4 and T6 | zircon
Volume: 6
Pages:
ISSN/eISSN: /20531591
|
Citations: 4
Article #: 056535
Source ID: 21100432452
Funding:
|
| 815 |
Title: Study of MRR and TWR in electric discharge machining of AISI D2 tool steel
Authors: Payal H.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-13-6412-9_8
Published: 2019
|
Type: Book Chapter
Keywords: Electrical discharge machining (EDM) | Metal removal rate (MRR) | Signal-to-noise ratio (S/N) | Tool steel | Tool wear rate (TWR)
Volume:
Pages: 85-92
ISSN/eISSN: 21954356/21954364
|
Citations: 3
Article #:
Source ID: 21100431311
Funding:
|
| 816 |
Title: Assessment of creep in composite disc having exponential, hyperbolic and uniform thickness profiles
Authors: Singh R.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2020.02.431
Published: 2019
|
Type: Conference Paper
Keywords: Composite | Creep | Disc | Exponential profile | Hyperbolic profile
Volume: 26
Pages: 1972-1976
ISSN/eISSN: /22147853
|
Citations: 3
Article #:
Source ID: 21100370037
Funding:
|
| 817 |
Title: Numerical investigations of ellipsoid shaped filler on heat transport behavior of reinforced polymer composites
Authors: Singh S.
Journal: Lecture Notes in Networks and Systems
DOI: 10.1007/978-3-030-04792-4_53
Published: 2019
|
Type: Book Chapter
Keywords: Composite | Effective thermal conductivity | Ellipsoid shaped filler | Heat transfer | Interfacial thermal resistance
Volume: 63
Pages: 408-414
ISSN/eISSN: 23673370/23673389
|
Citations: 1
Article #:
Source ID: 21100901469
Funding:
|
| 818 |
Title: CFD simulation of 90° pipe bend for multiphase flow of zinc tailing-water slurry
Authors: Verma P.
Journal: Proceedings of the Thermal and Fluids Engineering Summer Conference
DOI: 10.1615/TFEC2019.mph027203
Published: 2019
|
Type: Conference Paper
Keywords: CFD | Pipe bend | Pressure drop | R/d ratio | Slurry | Zinc tailing
Volume: 2019-April
Pages: 1507-1517
ISSN/eISSN: /23791748
|
Citations: 0
Article #:
Source ID: 21100970227
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 819 |
Title: Experimental Investigation into the Applicability of Nanoparticles in Purification of Sewage Water Through Usage of Solar Energy
Authors: Ohri V.
Journal: Energy Environment and Sustainability
DOI: 10.1007/978-981-13-3302-6_17
Published: 2019
|
Type: Book Chapter
Keywords: Condensation | Evaporation | Nanoparticles | Sewage water | Solar energy
Volume:
Pages: 537-549
ISSN/eISSN: 25228366/25228374
|
Citations: 0
Article #:
Source ID: 21101041971
Funding: Department of Mechanical Engineering, College of Engineering, Michigan State University
|
| 820 |
Title: Nano-finishing of Internal Surface of Power Steering Housing Cylinder Using Rotational Magnetorheological Honing Process
Authors: Paswan S.K.
Journal: Lecture Notes on Multidisciplinary Industrial Engineering
DOI: 10.1007/978-981-32-9425-7_26
Published: 2019
|
Type: Book Chapter
Keywords: Honing | Internal surface | Magnetorheological | Power steering housing cylinder | Rotational
Volume: Part F163
Pages: 299-307
ISSN/eISSN: 25225022/25225030
|
Citations: 0
Article #:
Source ID: 21101156896
Funding:
|
| 821 |
Title: Experimental design-based analysis on process parameters for head loss in pipe bend
Authors: Singh J.P.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-13-6416-7_36
Published: 2019
|
Type: Book Chapter
Keywords: ANOVA | Coal-water slurry | Head loss | Pipe bend | Taguchi
Volume:
Pages: 379-388
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding: Science and Engineering Research Board
|
| 822 |
Title: Experimental investigation of mechanical strength and temperature of friction stir welded joint
Authors: Kundu J.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-13-6469-3_58
Published: 2019
|
Type: Book Chapter
Keywords: Aluminum alloy temperature | Friction stir welding | Tool rotational speed | Ultimate tensile strength
Volume:
Pages: 631-639
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 823 |
Title: Magnetorheological nano-surface-finishing of tapered cavity of chrome steel punch
Authors: Thomas A.
Journal: ASME 2019 14th International Manufacturing Science and Engineering Conference Msec 2019
DOI: 10.1115/MSEC2019-2851
Published: 2019
|
Type: Conference Paper
Keywords: Chrome steel | Magnetorheological | Nanofinishing | Productivity | Punch | Surface roughness | Tapered cavity
Volume: 2
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21100938857
Funding:
|
| 824 |
Title: Investigation on the Rheological characteristics and Flow behaviour of Bottom ash-water slurry with additive
Authors: Pal Singh J.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/455/1/012133
Published: 20 December 2018
|
Type: Conference Paper
Keywords:
Volume: 455
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 3
Article #: 012133
Source ID: 19700200831
Funding:
|
| 825 |
Title: Prediction of pressure drop for the flow of zinc ore-water suspension in horizontal pipeline
Authors: Verma P.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/455/1/012135
Published: 20 December 2018
|
Type: Conference Paper
Keywords:
Volume: 455
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 2
Article #: 012135
Source ID: 19700200831
Funding:
|
| 826 |
Title: Enhancement of surface roughness for brittle material during rotary ultrasonic machining
Authors: Sharma A.
Journal: Matec Web of Conferences
DOI: 10.1051/matecconf/201824901006
Published: 10 December 2018
|
Type: Conference Paper
Keywords:
Volume: 249
Pages:
ISSN/eISSN: /2261236X
|
Citations: 37
Article #: 01006
Source ID: 21100316064
Funding:
|
| 827 |
Title: Waste materials as potential catalysts for biodiesel production: Current state and future scope
Authors: Marwaha A.
Journal: Fuel Processing Technology
DOI: 10.1016/j.fuproc.2018.09.011
Published: 1 December 2018
|
Type: Review
Keywords: Biodiesel | Calcium-based catalyst | Economical | Environment | Transesterification | Waste material
Volume: 181
Pages: 175-186
ISSN/eISSN: 03783820/
|
Citations: 115
Article #:
Source ID: 16315
Funding:
|
| 828 |
Title: Technological advances to maximize solar collector energy output: A review
Authors: Salvi S.S.
Journal: Journal of Electronic Packaging
DOI: 10.1115/1.4041219
Published: December 2018
|
Type: Review
Keywords: Absorber | Concentrated photovoltaic | Glazing | Heat transfer | Nanofluid | Photovoltaic cooling | Solar energy | Solar selective coating | Solar thermal collector
Volume: 140
Pages:
ISSN/eISSN: 10437398/15289044
|
Citations: 31
Article #: 040802
Source ID: 26621
Funding: Indo-US Science and Technology Forum
|
| 829 |
Title: Effect of B4C abrasive mixed into dielectric fluid on electrical discharge machining
Authors: Shard A.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-018-1474-0
Published: 1 December 2018
|
Type: Article
Keywords: Abrasive-mixed electrical discharge machining (AMEDM) | Material removal rate (MRR) | Titanium alloy | Tool wear rate (TWR) | Wear ratio (WR) and surface roughness (SR)
Volume: 40
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 24
Article #: 554
Source ID: 71359
Funding:
|
| 830 |
Title: Applicability of heat mirrors in reducing thermal losses in concentrating solar collectors
Authors: Khullar V.
Journal: Journal of Thermal Science and Engineering Applications
DOI: 10.1115/1.4040653
Published: 1 December 2018
|
Type: Article
Keywords:
Volume: 10
Pages:
ISSN/eISSN: 19485085/19485093
|
Citations: 8
Article #: 061004
Source ID: 19700182729
Funding:
|
| 831 |
Title: Suppression of contact bounce in beam-type microelectromechanical switches using a feedforward control scheme
Authors: Godara R.
Journal: JVC Journal of Vibration and Control
DOI: 10.1177/1077546318755978
Published: 1 December 2018
|
Type: Article
Keywords: Contact bounce-mitigation | electrostatic microbeams | MEMS switches | post-pull-in dynamics | RF MEMS
Volume: 24
Pages: 5502-5513
ISSN/eISSN: 10775463/17412986
|
Citations: 6
Article #:
Source ID: 13034
Funding: Indian Institute of Technology Roorkee
|
| 832 |
Title: Potential Risk by Disposal of Bottom Ash from Thermal Power Plants and Minimization by Addition of NaHCO3
Authors: Singh G.
Journal: Bulletin of Environmental Contamination and Toxicology
DOI: 10.1007/s00128-018-2469-3
Published: 1 December 2018
|
Type: Article
Keywords: Ash disposal | Bottom ash | Environmental impact | Ground water contamination | Traced elements
Volume: 101
Pages: 773-778
ISSN/eISSN: 00074861/14320800
|
Citations: 0
Article #:
Source ID: 24624
Funding:
|
| 833 |
Title: Study of particle size distribution of pulverized coals in utility boilers
Authors: Vishnoi N.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2017.1334731
Published: 17 November 2018
|
Type: Article
Keywords: Distribution function | modeling | particle size distribution | pulverized | sieve
Volume: 36
Pages: 999-1005
ISSN/eISSN: 02726351/15480046
|
Citations: 11
Article #:
Source ID: 13661
Funding:
|
| 834 |
Title: Biogas reforming for hydrogen enrichment by ceria decorated over nickel catalyst supported on titania and alumina
Authors: Rosha P.
Journal: International Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2018.09.187
Published: 15 November 2018
|
Type: Article
Keywords: Carbon dioxide | Catalyst | Dry reforming | Hydrogen | Methane
Volume:
Pages: 21246-21255
ISSN/eISSN: 03603199/
|
Citations: 32
Article #:
Source ID: 26991
Funding: Ministry of New and Renewable Energy India
|
| 835 |
Title: On surface modification of austenitic stainless steel using microwave processed Ni/Cr3C2 composite cladding
Authors: Kaushal S.
Journal: Surface Engineering
DOI: 10.1080/02670844.2017.1362808
Published: 2 November 2018
|
Type: Article
Keywords: characterisation | composite material | Microwave cladding | tribology
Volume: 34
Pages: 809-817
ISSN/eISSN: 02670844/17432944
|
Citations: 41
Article #:
Source ID: 28462
Funding:
|
| 836 |
Title: Characterization of chipping and tool wear during drilling of float glass using rotary ultrasonic machining
Authors: Sharma A.
Journal: Measurement Journal of the International Measurement Confederation
DOI: 10.1016/j.measurement.2018.06.040
Published: November 2018
|
Type: Article
Keywords: Chipping | Coordinate measuring machine | Float glass | Rotary ultrasonic machining | Tool wear
Volume: 128
Pages: 254-263
ISSN/eISSN: 02632241/
|
Citations: 65
Article #:
Source ID: 15424
Funding:
|
| 837 |
Title: On Development and Dry Sliding Wear Behavior of Microwave Processed Ni/Al2O3 Composite Clad
Authors: Singh B.
Journal: Journal of Tribology
DOI: 10.1115/1.4039996
Published: 1 November 2018
|
Type: Article
Keywords: composite powder | microhardness | microwave cladding | wear
Volume: 140
Pages:
ISSN/eISSN: 07424787/15288897
|
Citations: 38
Article #: 061603
Source ID: 17014
Funding:
|
| 838 |
Title: A Bézier extraction based XIGA approach for three-dimensional crack simulations
Authors: Singh S.K.
Journal: Advances in Engineering Software
DOI: 10.1016/j.advengsoft.2018.08.014
Published: November 2018
|
Type: Article
Keywords: Bernstein basis | Bézier extraction | NURBS | SIFs | XIGA
Volume: 125
Pages: 55-93
ISSN/eISSN: 09659978/18735339
|
Citations: 35
Article #:
Source ID: 18089
Funding: Ministry of Human Resource Development
|
| 839 |
Title: Role of particle size in assessment of physico-chemical properties and trace elements of Indian fly ash
Authors: Kumar S.
Journal: Waste Management and Research
DOI: 10.1177/0734242X18804033
Published: 1 November 2018
|
Type: Article
Keywords: Fly ash | leaching concentration | mineral characterization | particle size | physico-chemical properties | trace elements
Volume: 36
Pages: 1016-1022
ISSN/eISSN: 0734242X/10963669
|
Citations: 31
Article #:
Source ID: 26492
Funding:
|
| 840 |
Title: Tribological behaviour of hybrid AMMC sliding against steel and cast iron under MWCNT-Oil lubrication
Authors: Singh H.
Journal: Tribology International
DOI: 10.1016/j.triboint.2018.06.030
Published: November 2018
|
Type: Article
Keywords: Friction | Lubricant additive | Lubrication | Metal-matrix composite | MWCNT | Wear
Volume: 127
Pages: 509-519
ISSN/eISSN: 0301679X/
|
Citations: 27
Article #:
Source ID: 22116
Funding:
|
| 841 |
Title: Alkali leaching of indian coal for ash reduction
Authors: Singh J.P.
Journal: Iranian Journal of Chemistry and Chemical Engineering
DOI:
Published: November-December 2018
|
Type: Article
Keywords: Ash content | Chemical leaching | Coal | Low-grade coal | Ultra-clean coal
Volume: 37
Pages: 147-155
ISSN/eISSN: 10219986/
|
Citations: 5
Article #:
Source ID: 24128
Funding:
|
| 842 |
Title: Nanostructure Materials for Electrochemical Hydrogen Storage: A Review
Authors: Jindal H.
Journal: 2018 6th Edition of International Conference on Wireless Networks and Embedded Systems Wecon 2018 Proceedings
DOI: 10.1109/WECON.2018.8782067
Published: November 2018
|
Type: Conference Paper
Keywords: electrochemical hydrogen storage | hydrogen fuel | proton battery
Volume:
Pages: 97-101
ISSN/eISSN: /
|
Citations: 4
Article #: 8782067
Source ID: 21100924843
Funding:
|
| 843 |
Title: Analysis of particles in magnetorheological polishing fluid for finishing of ferromagnetic cylindrical workpiece
Authors: Grover V.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2017.1302535
Published: 3 October 2018
|
Type: Article
Keywords: Carbonyl iron particles | cylindrical workpiece | ferromagnetic | finite element analysis | magnetorheological finishing | silicon carbide particles
Volume: 36
Pages: 799-807
ISSN/eISSN: 02726351/15480046
|
Citations: 22
Article #:
Source ID: 13661
Funding:
|
| 844 |
Title: An overview of solid base heterogeneous catalysts for biodiesel production
Authors: Marwaha A.
Journal: Catalysis Reviews Science and Engineering
DOI: 10.1080/01614940.2018.1494782
Published: 2 October 2018
|
Type: Article
Keywords: Biodiesel | cost effective | heterogeneous catalyst | transesterification | yield
Volume: 60
Pages: 594-628
ISSN/eISSN: 01614940/15205703
|
Citations: 77
Article #:
Source ID: 26556
Funding:
|
| 845 |
Title: Parametric effect of vibrational drilling on osteonecrosis and comparative histopathology study with conventional drilling of cortical bone
Authors: Singh G.
Journal: Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
DOI: 10.1177/0954411918794983
Published: 1 October 2018
|
Type: Article
Keywords: Bone | bone drilling | bone fracture | histopathology | osteonecrosis | vibrational bone drilling
Volume: 232
Pages: 975-986
ISSN/eISSN: 09544119/20413033
|
Citations: 37
Article #:
Source ID: 16334
Funding:
|
| 846 |
Title: Addition of nanomer clays to GFRPs for enhanced impact strength and fracture toughness
Authors: Shelly D.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/aadb0d
Published: October 2018
|
Type: Article
Keywords: epoxy | fracture toughness | GFRP | impact strength | nano-clay | nanocomposites | VARIM
Volume: 5
Pages:
ISSN/eISSN: /20531591
|
Citations: 26
Article #: 105013
Source ID: 21100432452
Funding:
|
| 847 |
Title: Modular manipulators for cluttered environments: A task-based configuration design approach
Authors: Singh S.
Journal: Journal of Mechanisms and Robotics
DOI: 10.1115/1.4040633
Published: 1 October 2018
|
Type: Article
Keywords: Mechanism synthesis | Robot design
Volume: 10
Pages:
ISSN/eISSN: 19424302/19424310
|
Citations: 17
Article #: 051010
Source ID: 19700186816
Funding:
|
| 848 |
Title: Adaptive ball drop algorithm for toolpath generation of axisymmetric triangulated parts to eliminate overcutting
Authors: Jawanda A.S.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-018-2507-7
Published: October 2018
|
Type: Article
Keywords: Overcutting | STL sculptured surface machining | Three-axis CNC milling lathe | Toolpath planning optimisation | Undercutting
Volume: 99
Pages: 461-474
ISSN/eISSN: 02683768/14333015
|
Citations: 1
Article #:
Source ID: 20428
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 849 |
Title: A novel characterization method of fiber reinforced polymers with clustered microstructures for time dependent mass transfer
Authors: Jain D.
Journal: IEEE Journal of Selected Topics in Quantum Electronics
DOI: 10.1515/secm-2016-0063
Published: 25 September 2018
|
Type: Article
Keywords: FRP composites | mass diffusion | statistical characterization | structure property relationship
Volume: 25
Pages: 1003-1014
ISSN/eISSN: 07921233/21910359
|
Citations: 1
Article #:
Source ID: 26023
Funding:
|
| 850 |
Title: Optimization of biodiesel production from grape seed oil using Taguchi's orthogonal array
Authors: Singh G.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2018.1495778
Published: 17 September 2018
|
Type: Article
Keywords: ANOVA | Grape seed biodiesel | optimization | taguchi array | transesterification
Volume: 40
Pages: 2144-2153
ISSN/eISSN: 15567036/15567230
|
Citations: 37
Article #:
Source ID: 4500151514
Funding:
|
| 851 |
Title: Obstacle Avoidance of Bicycle Vehicle Model using Overwhelming Controller
Authors: Singh R.
Journal: Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-018-3175-5
Published: 1 September 2018
|
Type: Article
Keywords: Bicycle vehicle model | Bond graph | Inverse controller | Obstacle avoidance algorithm | Overwhelming controller | Trajectory tracking
Volume: 43
Pages: 4821-4833
ISSN/eISSN: 2193567X/21914281
|
Citations: 3
Article #:
Source ID: 13951
Funding:
|
| 852 |
Title: A rotating core-based magnetorheological nano-finishing process for external cylindrical surfaces
Authors: Singh M.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2017.1328116
Published: 18 August 2018
|
Type: Article
Keywords: Core | cylindrical | external | fluid | magnetorheological | nanofinishing | roughness | surfaces | tool
Volume: 33
Pages: 1160-1168
ISSN/eISSN: 10426914/15322475
|
Citations: 36
Article #:
Source ID: 21054
Funding:
|
| 853 |
Title: A new magnetorheological finishing process for ferromagnetic cylindrical honed surfaces
Authors: Bedi T.S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2016.1269925
Published: 18 August 2018
|
Type: Article
Keywords: Cylindrical | ferromagnetic | finishing | honed | integrity | internal | magnetorheological | roughness | surface
Volume: 33
Pages: 1141-1149
ISSN/eISSN: 10426914/15322475
|
Citations: 30
Article #:
Source ID: 21054
Funding:
|
| 854 |
Title: Improved magnetorheological honing process for nanofinishing of variable cylindrical internal surfaces
Authors: Grover V.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2017.1339322
Published: 18 August 2018
|
Type: Article
Keywords: Curved | flat | honing | magnet | magnetorheological | permanent | roughness | surface | tool
Volume: 33
Pages: 1177-1187
ISSN/eISSN: 10426914/15322475
|
Citations: 26
Article #:
Source ID: 21054
Funding:
|
| 855 |
Title: Magnetorheological nanofinishing of BK7 glass for lens manufacturing
Authors: Kumar S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2017.1364759
Published: 18 August 2018
|
Type: Article
Keywords: BK7 | glass | magnetorheological | MR fluid | nanofinishing | optical | properties | roughness
Volume: 33
Pages: 1188-1196
ISSN/eISSN: 10426914/15322475
|
Citations: 25
Article #:
Source ID: 21054
Funding:
|
| 856 |
Title: Magnetorheological finishing of ferromagnetic blind-hole type surfaces
Authors: Bedi T.S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2017.1328120
Published: 18 August 2018
|
Type: Article
Keywords: Blind-hole | cavity | finishing | fluid | magnetorheological | mold | roughness | surface
Volume: 33
Pages: 1169-1176
ISSN/eISSN: 10426914/15322475
|
Citations: 10
Article #:
Source ID: 21054
Funding:
|
| 857 |
Title: Effect of process parameters on mechanical properties of solidified PLA parts fabricated by 3D printing process
Authors: Khatwani J.
Journal: 3D Printing and Additive Manufacturing Technologies
DOI: 10.1007/978-981-13-0305-0_9
Published: 2 August 2018
|
Type: Book Chapter
Keywords: 3D printing | Flexural strength | Layer thickness | Nozzle diameter | Part bed temperature | Tensile strength
Volume:
Pages: 95-104
ISSN/eISSN: /
|
Citations: 26
Article #:
Source ID: 21100878091
Funding:
|
| 858 |
Title: Experimental investigation of photo-thermal analysis of blended nanoparticles (Al2O3/Co3O4) for direct absorption solar thermal collector
Authors: Bhalla V.
Journal: Renewable Energy
DOI: 10.1016/j.renene.2018.01.042
Published: August 2018
|
Type: Article
Keywords: Blended nanoparticles | Direct absorption | Nanofluids | Solar energy | Solar-weighted absorptivity | Surface absorption
Volume: 123
Pages: 616-626
ISSN/eISSN: 09601481/18790682
|
Citations: 95
Article #:
Source ID: 27569
Funding: Indo-US Science and Technology Forum
|
| 859 |
Title: An investigation into the flowability of fine powders used in pharmaceutical industries
Authors: Garg V.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2018.06.014
Published: August 2018
|
Type: Article
Keywords: Flow function | Flow property testing | Hopper design | Pharmaceutical excipients | Time consolidation
Volume: 336
Pages: 375-382
ISSN/eISSN: 00325910/1873328X
|
Citations: 71
Article #:
Source ID: 13717
Funding:
|
| 860 |
Title: Modelling of surface roughness in a new magnetorheological honing process for internal finishing of cylindrical workpieces
Authors: Grover V.
Journal: International Journal of Mechanical Sciences
DOI: 10.1016/j.ijmecsci.2018.05.058
Published: August 2018
|
Type: Article
Keywords: Cylindrical finishing | Honing process | Internal | Magnetorheological | Mathematical model | Surface roughness
Volume: 144
Pages: 679-695
ISSN/eISSN: 00207403/
|
Citations: 42
Article #:
Source ID: 50170
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 861 |
Title: Review on CFD Modelling of Fluidized Bed Combustion Systems based on Biomass and Co-firing
Authors: Kumar H.
Journal: Journal of the Institution of Engineers India Series C
DOI: 10.1007/s40032-017-0361-2
Published: 1 August 2018
|
Type: Review
Keywords: Biomass | CFD | Co-firing | Combustion | Fluidized bed
Volume: 99
Pages: 449-474
ISSN/eISSN: 22500545/22500553
|
Citations: 29
Article #:
Source ID: 21100831410
Funding:
|
| 862 |
Title: A new enrichment scheme in XFEM to model crack growth behavior in ductile materials
Authors: Kumar S.
Journal: Theoretical and Applied Fracture Mechanics
DOI: 10.1016/j.tafmec.2018.05.008
Published: August 2018
|
Type: Article
Keywords: Heaviside function | J-integral | Ramp function | Stable crack growth | XFEM
Volume: 96
Pages: 296-307
ISSN/eISSN: 01678442/
|
Citations: 22
Article #:
Source ID: 14588
Funding:
|
| 863 |
Title: Modelling of urban traffic noise using a systems approach
Authors: Singh D.
Journal: Proceedings of the Institution of Civil Engineers Transport
DOI: 10.1680/jtran.16.00094
Published: 1 August 2018
|
Type: Article
Keywords: Environment | Noise | Town & city planning
Volume: 171
Pages: 235-244
ISSN/eISSN: 0965092X/17517710
|
Citations: 5
Article #:
Source ID: 16166
Funding:
|
| 864 |
Title: Traffic noise prediction modelling using multi-level ensemble method
Authors: Rana P.
Journal: Aip Conference Proceedings
DOI: 10.1063/1.5045436
Published: 27 July 2018
|
Type: Conference Paper
Keywords:
Volume: 1982
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 4
Article #: 020030
Source ID: 26916
Funding:
|
| 865 |
Title: Honking noise contribution to road traffic noise prediction
Authors: Guarnaccia C.
Journal: Aip Conference Proceedings
DOI: 10.1063/1.5045448
Published: 27 July 2018
|
Type: Conference Paper
Keywords:
Volume: 1982
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 3
Article #: 020042
Source ID: 26916
Funding:
|
| 866 |
Title: Influence of solid concentration on rheological characteristics of fly ash-water suspension
Authors: Singh H.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/377/1/012134
Published: 13 July 2018
|
Type: Conference Paper
Keywords:
Volume: 377
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 7
Article #: 012134
Source ID: 19700200831
Funding:
|
| 867 |
Title: Influence of Chemical Leaching on Rheology and Ash Reduction of Indian Coal
Authors: Juneja P.
Journal: International Journal of Coal Preparation and Utilization
DOI: 10.1080/19392699.2016.1247053
Published: 4 July 2018
|
Type: Article
Keywords: ash content | chemical leaching | Indian coal | rheology | ultraclean coal | viscosity
Volume: 38
Pages: 260-270
ISSN/eISSN: 19392699/19392702
|
Citations: 9
Article #:
Source ID: 12400154727
Funding:
|
| 868 |
Title: Monitoring invisible corrosion in concrete using a combination of wave propagation techniques
Authors: Sharma A.
Journal: Cement and Concrete Composites
DOI: 10.1016/j.cemconcomp.2018.03.014
Published: July 2018
|
Type: Article
Keywords:
Volume: 90
Pages: 89-99
ISSN/eISSN: 09589465/
|
Citations: 53
Article #:
Source ID: 23811
Funding:
|
| 869 |
Title: Performance evaluation of a brine-recirculation multistage flash desalination system coupled with nanofluid-based direct absorption solar collector
Authors: Garg K.
Journal: Renewable Energy
DOI: 10.1016/j.renene.2018.01.050
Published: July 2018
|
Type: Article
Keywords: Desalination | Gained output ratio | Multistage flash | Nanofluid | Nanoparticles | Solar energy
Volume: 122
Pages: 140-151
ISSN/eISSN: 09601481/18790682
|
Citations: 48
Article #:
Source ID: 27569
Funding: Indian Institute of Technology Bombay
|
| 870 |
Title: Analysis of cracked plate using higher-order shear deformation theory: Asymptotic crack-tip fields and XIGA implementation
Authors: Singh S.K.
Journal: Computer Methods in Applied Mechanics and Engineering
DOI: 10.1016/j.cma.2018.03.009
Published: 1 July 2018
|
Type: Article
Keywords: Crack-tip fields | Cracked plate | HSDT | Interaction integral | Moment intensity factors | XIGA
Volume: 336
Pages: 594-639
ISSN/eISSN: 00457825/
|
Citations: 44
Article #:
Source ID: 18158
Funding: Department of Science and Technology, Ministry of Science and Technology
|
| 871 |
Title: Effect of dual particle size (DPS) on dry sliding wear behaviour of LM30/sillimanite composites
Authors: Sharma S.
Journal: Tribology International
DOI: 10.1016/j.triboint.2017.12.031
Published: July 2018
|
Type: Article
Keywords: AMCs | Dual particle size | LM30 alloy | Sillimanite | Wear resistance
Volume: 123
Pages: 142-154
ISSN/eISSN: 0301679X/
|
Citations: 37
Article #:
Source ID: 22116
Funding:
|
| 872 |
Title: Mechanical and thermal properties of SrO/BaO modified Y2O3-Al2O3-B2O3-SiO2 glasses and their compatibility with solid oxide fuel cell components
Authors: Kaur N.
Journal: Journal of Physics and Chemistry of Solids
DOI: 10.1016/j.jpcs.2018.03.021
Published: July 2018
|
Type: Article
Keywords: Coefficient of thermal expansion | Fracture toughness | Glass seal | Hardness | Scanning electron microscopy | Solid oxide fuel cell
Volume: 118
Pages: 248-254
ISSN/eISSN: 00223697/
|
Citations: 23
Article #:
Source ID: 28564
Funding: University Grants Commission
|
| 873 |
Title: Influence of MoS2, H3BO3, and MWCNT Additives on the Dry and Lubricated Sliding Tribology of AMMC-Steel Contacts
Authors: Singh H.
Journal: Journal of Tribology
DOI: 10.1115/1.4038957
Published: 1 July 2018
|
Type: Article
Keywords: aluminum | electron microscopy | lubricant additives | metal-matrix composite | sliding friction | sliding wear | solid lubricants
Volume: 140
Pages:
ISSN/eISSN: 07424787/15288897
|
Citations: 22
Article #: 041801
Source ID: 17014
Funding:
|
| 874 |
Title: An approach for developing nickel–alumina powder-based metal matrix composite cladding on SS-304 substrate through microwave heating
Authors: Kaushal S.
Journal: Journal of Composite Materials
DOI: 10.1177/0021998317740732
Published: 1 July 2018
|
Type: Article
Keywords: metal matrix composite | micro-hardness | Microwave cladding | surface characterization
Volume: 52
Pages: 2131-2138
ISSN/eISSN: 00219983/1530793X
|
Citations: 21
Article #:
Source ID: 21140
Funding:
|
| 875 |
Title: Adaptive neuro-fuzzy inference system–based path planning of 5-degrees-of-freedom spatial manipulator for medical applications
Authors: Narayan J.
Journal: Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
DOI: 10.1177/0954411918781418
Published: 1 July 2018
|
Type: Article
Keywords: adaptive neuro-fuzzy inference system | inverse kinematics | medical surgery | path planning | Spatial manipulator
Volume: 232
Pages: 726-732
ISSN/eISSN: 09544119/20413033
|
Citations: 21
Article #:
Source ID: 16334
Funding:
|
| 876 |
Title: An efficient multipoint 5-axis tool positioning method for tensor product surfaces
Authors: Duvedi R.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-018-1940-y
Published: 1 July 2018
|
Type: Article
Keywords: 5-axis machining | Bézier surface | CNC machining | Multi-point machining
Volume: 97
Pages: 279-295
ISSN/eISSN: 02683768/14333015
|
Citations: 11
Article #:
Source ID: 20428
Funding:
|
| 877 |
Title: A low cost wireless patient-health tracking system
Authors: Singh M.
Journal: Indian Journal of Public Health Research and Development
DOI: 10.5958/0976-5506.2018.00644.7
Published: July 2018
|
Type: Article
Keywords: Healthcare system | Orientation | Physiology parameters | Wearable embedded system | Wireless monitoring
Volume: 9
Pages: 221-225
ISSN/eISSN: 09760245/09765506
|
Citations: 0
Article #:
Source ID: 19700188435
Funding:
|
| 878 |
Title: Real-time control of a rotary inverted pendulum using robust LQR-based ANFIS controller
Authors: Chawla I.
Journal: International Journal of Nonlinear Sciences and Numerical Simulation
DOI: 10.1515/ijnsns-2017-0139
Published: 26 June 2018
|
Type: Article
Keywords: ANFIS | inverted pendulum | LQR controller | real-time control | robust controller
Volume: 19
Pages: 379-389
ISSN/eISSN: 15651339/
|
Citations: 21
Article #:
Source ID: 23247
Funding:
|
| 879 |
Title: Assessment of non-polynomial shear deformation theories for thermo-mechanical analysis of laminated composite plates
Authors: Joshan Y.S.
Journal: Steel and Composite Structures
DOI: 10.12989/scs.2018.27.6.761
Published: 25 June 2018
|
Type: Article
Keywords: Laminated plate | Navier solution | Shear deformation theory | Thermo-mechanical analysis
Volume: 27
Pages: 761-775
ISSN/eISSN: 12299367/
|
Citations: 12
Article #:
Source ID: 28423
Funding: Science and Engineering Research Board
|
| 880 |
Title: Optimization of Hydrogen-Enriched Biogas by Dry Oxidative Reforming with Nickel Nanopowder Using Response Surface Methodology
Authors: Rosha P.
Journal: Energy and Fuels
DOI: 10.1021/acs.energyfuels.8b00819
Published: 21 June 2018
|
Type: Article
Keywords:
Volume: 32
Pages: 6995-7001
ISSN/eISSN: 08870624/15205029
|
Citations: 27
Article #:
Source ID: 29364
Funding: Ministry of New and Renewable Energy India
|
| 881 |
Title: Modeling, analysis and control of a single stage linear inverted pendulum
Authors: Singh G.
Journal: IEEE International Conference on Power Control Signals and Instrumentation Engineering Icpcsi 2017
DOI: 10.1109/ICPCSI.2017.8392216
Published: 20 June 2018
|
Type: Conference Paper
Keywords: Cart pendulum system | Googoltech | LQR controller | stabilization | state-space representation
Volume:
Pages: 2728-2733
ISSN/eISSN: /
|
Citations: 7
Article #:
Source ID: 21100868802
Funding:
|
| 882 |
Title: On processing of Ni-WC based functionally graded composite clads through microwave heating
Authors: Kaushal S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2017.1401724
Published: 11 June 2018
|
Type: Article
Keywords: Clads | functionally | graded | microstructure | microwave | XRD
Volume: 33
Pages: 822-828
ISSN/eISSN: 10426914/15322475
|
Citations: 46
Article #:
Source ID: 21054
Funding:
|
| 883 |
Title: Experimental study of basin type vertical multiple effect diffusion solar still integrated with mini solar pond to generate nocturnal distillate
Authors: Dhindsa G.
Journal: Energy Conversion and Management
DOI: 10.1016/j.enconman.2018.03.100
Published: 1 June 2018
|
Type: Article
Keywords: Floating wicks | Multiple effect | Nocturnal distillate | Solar distillation | Solar pond
Volume: 165
Pages: 669-680
ISSN/eISSN: 01968904/
|
Citations: 56
Article #:
Source ID: 29372
Funding:
|
| 884 |
Title: Solar selective volumetric receivers for harnessing solar thermal energy
Authors: Khullar V.
Journal: Journal of Heat Transfer
DOI: 10.1115/1.4039214
Published: June 2018
|
Type: Article
Keywords:
Volume: 140
Pages:
ISSN/eISSN: 00221481/15288943
|
Citations: 20
Article #: 062702
Source ID: 20968
Funding: Department of Science and Technology, Republic of South Africa
|
| 885 |
Title: Influence of flow velocity and flexural rigidity on the flow induced vibration and acoustic characteristics of a flexible plate
Authors: Purohit A.
Journal: JVC Journal of Vibration and Control
DOI: 10.1177/1077546316685227
Published: 1 June 2018
|
Type: Article
Keywords: computational aeroacoustics | far-field acoustics | Flow-induced vibration | fluid-structure interaction | splitter plate
Volume: 24
Pages: 2284-2300
ISSN/eISSN: 10775463/17412986
|
Citations: 14
Article #:
Source ID: 13034
Funding: Ministry of Human Resource Development
|
| 886 |
Title: On processing of Ni-Cr3C2 based functionally graded clads through microwave heating
Authors: Kaushal S.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/aac805
Published: June 2018
|
Type: Article
Keywords: functionally graded material | microstructue | microwave cladding
Volume: 5
Pages:
ISSN/eISSN: /20531591
|
Citations: 13
Article #: 066405
Source ID: 21100432452
Funding:
|
| 887 |
Title: On developing improved modelling for particle velocity and solids friction for fluidized dense-phase pneumatic transport systems
Authors: Sharma K.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2018.03.039
Published: 1 June 2018
|
Type: Article
Keywords: Dense-phase | Fine powders | Pneumatic conveying | Pneumatic conveying characteristics | Scale-up validation | Solids friction
Volume: 332
Pages: 41-55
ISSN/eISSN: 00325910/1873328X
|
Citations: 10
Article #:
Source ID: 13717
Funding:
|
| 888 |
Title: Modeling flow properties of fine dry powders using particle morphological properties and its effects on geometry of fly ash evacuation hoppers
Authors: Mallick S.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2017.1367746
Published: 19 May 2018
|
Type: Article
Keywords: Cohesion | compressibility index | fluidization velocity | hopper geometry | particle size distribution | tapped bulk density
Volume: 36
Pages: 464-472
ISSN/eISSN: 02726351/15480046
|
Citations: 5
Article #:
Source ID: 13661
Funding:
|
| 889 |
Title: Performance analysis of effect of vibrations on solar panel conversion efficiency
Authors: Manu O.
Journal: Proceedings of the 2017 International Conference on Smart Technology for Smart Nation Smarttechcon 2017
DOI: 10.1109/SmartTechCon.2017.8358449
Published: 11 May 2018
|
Type: Conference Paper
Keywords: Astable multivibrator | Flexible Solar Panel | Lead Zirconate Titanate | Vibrations
Volume:
Pages: 635-638
ISSN/eISSN: /
|
Citations: 4
Article #:
Source ID: 21100863040
Funding:
|
| 890 |
Title: Effect of time dependent morphological parameters of nanoclusters on perikinetic heat conduction and induced micro-convection mechanisms of oxide based nanofluids
Authors: Kundan L.
Journal: Experimental Heat Transfer
DOI: 10.1080/08916152.2017.1410504
Published: 4 May 2018
|
Type: Article
Keywords: Brownian motion | nano-fluid | perikinetic conduction | stability ratio | thermal conductivity
Volume: 31
Pages: 251-274
ISSN/eISSN: 08916152/15210480
|
Citations: 3
Article #:
Source ID: 13719
Funding:
|
| 891 |
Title: Microwave melting and processing of metal–ceramic composite castings
Authors: Singh S.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/0954405416666900
Published: 1 May 2018
|
Type: Article
Keywords: castings | composites | defects | microhardness | microstructure | Microwave heating
Volume: 232
Pages: 1235-1243
ISSN/eISSN: 09544054/20412975
|
Citations: 34
Article #:
Source ID: 20406
Funding:
|
| 892 |
Title: An experimental investigation on the effect of particle size into the flowability of fly ash
Authors: Rohilla L.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2018.02.013
Published: 1 May 2018
|
Type: Article
Keywords: Critical particle size | Fly ash | Hoppers | Powder flow properties | Wall friction
Volume: 330
Pages: 164-173
ISSN/eISSN: 00325910/1873328X
|
Citations: 19
Article #:
Source ID: 13717
Funding:
|
| 893 |
Title: Stability and phase space analysis of fluidized-dense phase pneumatic transport system
Authors: Kaur B.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2018.02.023
Published: 1 May 2018
|
Type: Article
Keywords: Dense-phase | Fine powders | Linear stability analysis | Phase space and Bistability | Pneumatic conveying | Solids friction
Volume: 330
Pages: 190-200
ISSN/eISSN: 00325910/1873328X
|
Citations: 6
Article #:
Source ID: 13717
Funding: University Grants Commission
|
| 894 |
Title: Surface modification of SS-316L steel using microwave processed Ni/WC based composite clads
Authors: Kaushal S.
Journal: Aip Conference Proceedings
DOI: 10.1063/1.5029658
Published: 20 April 2018
|
Type: Conference Paper
Keywords:
Volume: 1943
Pages:
ISSN/eISSN: 0094243X/15517616
|
Citations: 1
Article #: 020082
Source ID: 26916
Funding: Science and Engineering Research Board
|
| 895 |
Title: A comparative study to evaluate the corrosion performance of Zr incorporated Cr3C2-(NiCr) coating at 900 °C
Authors: Ahuja L.
Journal: Ceramics International
DOI: 10.1016/j.ceramint.2018.01.047
Published: 15 April 2018
|
Type: Article
Keywords: D-gun | Hot corrosion | Oxidation | Zirconium
Volume: 44
Pages: 6479-6492
ISSN/eISSN: 02728842/
|
Citations: 22
Article #:
Source ID: 21522
Funding:
|
| 896 |
Title: Corrosion performance of Cr3C2-NiCr+0.2%Zr coated super alloys under actual medical waste incinerator environment
Authors: Ahuja L.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/330/1/012049
Published: 5 April 2018
|
Type: Conference Paper
Keywords:
Volume: 330
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 0
Article #: 012049
Source ID: 19700200831
Funding:
|
| 897 |
Title: Atomic-level finishing of aluminum alloy by chemo-mechanical magneto-rheological finishing (CMMRF) for optical applications
Authors: Ghai V.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2018.03.032
Published: April 2018
|
Type: Article
Keywords: Chemo-mechanical magneto-rheological finishing (CMMRF) | Chemomechanical polishing (CMP) | Magnetorheological finishing (MRF)
Volume: 32
Pages: 635-643
ISSN/eISSN: 15266125/
|
Citations: 44
Article #:
Source ID: 27677
Funding: Cryptic Masons Medical Research Foundation
|
| 898 |
Title: Effect of nanoclay and bolt preloads on the strength of bolted joints in glass epoxy nanocomposites
Authors: Chani K.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-018-1108-6
Published: 1 April 2018
|
Type: Note
Keywords: Bolt joints | Characteristic curve | Nanoclay | Preloads | Taguchi method | Woven glass fiber
Volume: 40
Pages:
ISSN/eISSN: 16785878/18063691
|
Citations: 16
Article #: 184
Source ID: 71359
Funding:
|
| 899 |
Title: Effect of Tailoring Martensite Shape and Spatial Distribution on Tensile Deformation Characteristics of Dual Phase Steels
Authors: Ravi Kumar B.
Journal: Journal of Engineering Materials and Technology Transactions of the ASME
DOI: 10.1115/1.4037659
Published: 1 April 2018
|
Type: Article
Keywords:
Volume: 140
Pages:
ISSN/eISSN: 00944289/15288889
|
Citations: 5
Article #: 021002
Source ID: 21155
Funding:
|
| 900 |
Title: Technical feasibility of a proton battery with an activated carbon electrode
Authors: Heidari S.
Journal: International Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2018.01.153
Published: 22 March 2018
|
Type: Article
Keywords: Activated carbon | Electrical energy storage | Electrochemical hydrogen storage | Proton battery
Volume: 43
Pages: 6197-6209
ISSN/eISSN: 03603199/
|
Citations: 41
Article #:
Source ID: 26991
Funding: Office of Naval Research Global
|
| 901 |
Title: An overview of problems and solutions for components subjected to fireside of boilers
Authors: Singh A.
Journal: International Journal of Industrial Chemistry
DOI: 10.1007/s40090-017-0133-0
Published: 1 March 2018
|
Type: Review
Keywords: Boilers | Coatings | Fuel | Hot corrosion | Slagging | Thermal spray
Volume: 9
Pages:
ISSN/eISSN: 22285970/22285547
|
Citations: 41
Article #:
Source ID: 21100406430
Funding:
|
| 902 |
Title: Nano-surface finishing of hardened AISI 52100 steel using magnetorheological solid core rotating tool
Authors: Maan S.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-017-1209-x
Published: 1 March 2018
|
Type: Article
Keywords: Hardened AISI 52100 steel | Magnetic field | Magnetorheological | Molds | MR fluids | Nanofinishing | Plastic | Solid rotating core | SPI-A1 standard | Surface roughness
Volume: 95
Pages: 513-526
ISSN/eISSN: 02683768/14333015
|
Citations: 24
Article #:
Source ID: 20428
Funding:
|
| 903 |
Title: Processing of Ni20WC10Mo based composite clads on austenitic stainless steel through microwave hybrid heating
Authors: Kaushal S.
Journal: Materials Research Express
DOI: 10.1088/2053-1591/aab0f2
Published: March 2018
|
Type: Article
Keywords: composite material | microwave cladding | molybdenum | nickel | SEM | WC | XRD
Volume: 5
Pages:
ISSN/eISSN: /20531591
|
Citations: 11
Article #: 036401
Source ID: 21100432452
Funding: Science and Engineering Research Board
|
| 904 |
Title: To study the contribution of different geometric parameters on the failure load for multi holes pin joints prepared from glass/epoxy nanoclay laminates
Authors: Singh M.
Journal: Journal of Composite Materials
DOI: 10.1177/0021998317712572
Published: 1 March 2018
|
Type: Article
Keywords: analysis of variance | characteristic curve method | glass reinforced | Multi holes pin joint | nanoclay | Taguchi method | Tsai–Wu failure criteria
Volume: 52
Pages: 629-644
ISSN/eISSN: 00219983/1530793X
|
Citations: 10
Article #:
Source ID: 21140
Funding:
|
| 905 |
Title: Numerical implementation of drop and tilt method of five-axis tool positioning for tensor product surfaces
Authors: Duvedi R.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-017-1193-1
Published: 1 March 2018
|
Type: Article
Keywords: Bézier surface | CNC machining | Five-axis machining | Multi-point machining
Volume: 95
Pages: 219-232
ISSN/eISSN: 02683768/14333015
|
Citations: 8
Article #:
Source ID: 20428
Funding:
|
| 906 |
Title: Monitoring early-age setting of silica fume concrete using wave propagation techniques
Authors: Bhalla N.
Journal: Construction and Building Materials
DOI: 10.1016/j.conbuildmat.2017.12.032
Published: 20 February 2018
|
Type: Article
Keywords: Acoustic emission | Compressive strength | Concrete | Guided waves | Setting | Silica fume | Ultrasonic pulse velocity
Volume: 162
Pages: 802-815
ISSN/eISSN: 09500618/
|
Citations: 38
Article #:
Source ID: 24443
Funding:
|
| 907 |
Title: Investigation of deterioration in corroding reinforced concrete beams using active and passive techniques
Authors: Sharma A.
Journal: Construction and Building Materials
DOI: 10.1016/j.conbuildmat.2017.11.165
Published: 10 February 2018
|
Type: Article
Keywords: Acoustic emission | Corrosion | Guided waves | Reinforced concrete | Tensile testing
Volume: 161
Pages: 555-569
ISSN/eISSN: 09500618/
|
Citations: 47
Article #:
Source ID: 24443
Funding:
|
| 908 |
Title: Influence of gaseous fuel induction on the various engine characteristics of a dual fuel compression ignition engine: A review
Authors: Rosha P.
Journal: Renewable and Sustainable Energy Reviews
DOI: 10.1016/j.rser.2017.10.055
Published: February 2018
|
Type: Review
Keywords: Biogas | Combustion | Diesel | Emissions | Hydrogen | Performance | Syngas
Volume: 82
Pages: 3333-3349
ISSN/eISSN: 13640321/18790690
|
Citations: 101
Article #:
Source ID: 27567
Funding:
|
| 909 |
Title: Potential heat transfer fluids (Nanofluids) for direct volumetric absorption-based solar thermal systems
Authors: Khullar V.
Journal: Journal of Thermal Science and Engineering Applications
DOI: 10.1115/1.4036795
Published: 1 February 2018
|
Type: Article
Keywords: Heat transfer | Nanofluid | Nanoparticle | Optical properties | Solar energy | Volumetric absorption
Volume: 10
Pages:
ISSN/eISSN: 19485085/19485093
|
Citations: 54
Article #: 011009
Source ID: 19700182729
Funding:
|
| 910 |
Title: Production of producer gas from sugarcane bagasse and carpentry waste and its sustainable use in a dual fuel CI engine: A performance, emission, and noise investigation
Authors: Singh H.
Journal: Journal of the Energy Institute
DOI: 10.1016/j.joei.2016.11.002
Published: February 2018
|
Type: Article
Keywords: Bioenergy | Biomass gasification | Dual fuel engine | Emission studies | Performance characteristics
Volume: 91
Pages: 43-54
ISSN/eISSN: 17439671/17460220
|
Citations: 51
Article #:
Source ID: 58130
Funding:
|
| 911 |
Title: On Development and Wear Behavior of Microwave-Processed Functionally Graded Ni-SiC Clads on SS-304 Substrate
Authors: Kaushal S.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-017-3110-z
Published: 1 February 2018
|
Type: Article
Keywords: functionally graded cladding | microwave cladding | surface modification
Volume: 27
Pages: 777-786
ISSN/eISSN: 10599495/15441024
|
Citations: 28
Article #:
Source ID: 21160
Funding:
|
| 912 |
Title: An approach for functionally graded cladding of composite material on austenitic stainless steel substrate through microwave heating
Authors: Kaushal S.
Journal: Journal of Composite Materials
DOI: 10.1177/0021998317705977
Published: 1 February 2018
|
Type: Article
Keywords: characterization | composite material | functionally graded cladding | Microwave hybrid heating
Volume: 52
Pages: 301-312
ISSN/eISSN: 00219983/1530793X
|
Citations: 27
Article #:
Source ID: 21140
Funding:
|
| 913 |
Title: Impact of Martensite Spatial Distribution on Quasi-Static and Dynamic Deformation Behavior of Dual-Phase Steel
Authors: Singh M.
Journal: Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science
DOI: 10.1007/s11661-017-4433-y
Published: 1 February 2018
|
Type: Article
Keywords:
Volume: 49
Pages: 463-475
ISSN/eISSN: 10735623/
|
Citations: 15
Article #:
Source ID: 27356
Funding:
|
| 914 |
Title: Nanofinishing of BK7 glass using a magnetorheological solid rotating core tool
Authors: Kumar S.
Journal: Applied Optics
DOI: 10.1364/AO.57.000942
Published: 1 February 2018
|
Type: Article
Keywords:
Volume: 57
Pages: 942-951
ISSN/eISSN: 1559128X/21553165
|
Citations: 11
Article #:
Source ID: 29593
Funding:
|
| 915 |
Title: Optimization of process parameters for improving drilling quality and machining performance of abrasive assisted drilling on AISI D2 steel
Authors: Kumar P.
Journal: Indian Journal of Engineering and Materials Sciences
DOI:
Published: February 2018
|
Type: Article
Keywords: Abrasive assisted drilling | AISI D2 steel | ANOVA | Material removal rate | Surface roughness | Taguchi
Volume: 25
Pages: 33-41
ISSN/eISSN: 09714588/09751017
|
Citations: 5
Article #:
Source ID: 29812
Funding:
|
| 916 |
Title: An investigation of double-glass-covered trapezoidal salt-gradient solar pond coupled with reflector
Authors: Dhindsa G.S.
Journal: International Journal of Green Energy
DOI: 10.1080/15435075.2017.1421199
Published: 26 January 2018
|
Type: Article
Keywords: glass cover | reflector cover | shading area | temperature distribution | Trapezoidal solar pond
Volume: 15
Pages: 57-68
ISSN/eISSN: 15435075/15435083
|
Citations: 19
Article #:
Source ID: 4700151730
Funding:
|
| 917 |
Title: Processing of polyethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites
Authors: Singh K.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2017.1291955
Published: 25 January 2018
|
Type: Article
Keywords: Compatibilization | epoxy | GFRP | impact strength | MAH-grafting | Nanocomposites | PET | silane-treatment | ultraviolet
Volume: 33
Pages: 165-173
ISSN/eISSN: 10426914/15322475
|
Citations: 24
Article #:
Source ID: 21054
Funding:
|
| 918 |
Title: Processing of Ni-WC-8Co MMC casting through microwave melting
Authors: Singh S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2017.1291954
Published: 2 January 2018
|
Type: Article
Keywords: Carbide | casting | composites | melting | microstructure | Microwave | nickel | XRD
Volume: 33
Pages: 26-34
ISSN/eISSN: 10426914/15322475
|
Citations: 38
Article #:
Source ID: 21054
Funding:
|
| 919 |
Title: Development of magnetorheological fluid-based process for finishing of ferromagnetic cylindrical workpiece
Authors: Bedi T.S.
Journal: Machining Science and Technology
DOI: 10.1080/10910344.2017.1336631
Published: 2 January 2018
|
Type: Article
Keywords: Cylindrical internal surface | ferromagnetic | magnetic flux density | magnetorheological finishing | roughness
Volume: 22
Pages: 120-146
ISSN/eISSN: 10910344/15322483
|
Citations: 28
Article #:
Source ID: 21223
Funding:
|
| 920 |
Title: Effect of particle size on dry sliding wear behaviour of sillimanite reinforced aluminium matrix composites
Authors: Sharma S.
Journal: Ceramics International
DOI: 10.1016/j.ceramint.2017.09.132
Published: January 2018
|
Type: Article
Keywords: LM30 aluminium alloy | Reinforcement | Sillimanite | Wear resistance
Volume: 44
Pages: 104-114
ISSN/eISSN: 02728842/
|
Citations: 111
Article #:
Source ID: 21522
Funding:
|
| 921 |
Title: Effect of particle size on dry sliding wear behaviour of sillimanite reinforced aluminium matrix composites
Authors: Sharma S.
Journal: Ceramics International
DOI: 10.1016/j.ceramint.2017.09.132
Published: January 2018
|
Type: Article
Keywords: LM30 aluminium alloy | Reinforcement | Sillimanite | Wear resistance
Volume: 44
Pages: 104-114
ISSN/eISSN: 02728842/
|
Citations: 111
Article #:
Source ID: 21522
Funding:
|
| 922 |
Title: Magnetorheological nano-finishing of diamagnetic material using permanent magnets tool
Authors: Kansal H.
Journal: Precision Engineering
DOI: 10.1016/j.precisioneng.2017.07.003
Published: January 2018
|
Type: Article
Keywords: Copper | Diamagnetic | Magnetic flux density | Magnetorheological | Nanofinishing | Surface roughness
Volume: 51
Pages: 30-39
ISSN/eISSN: 01416359/
|
Citations: 48
Article #:
Source ID: 13790
Funding:
|
| 923 |
Title: Seawater ageing of glass fiber reinforced epoxy nanocomposites based on silylated clays
Authors: Sharma B.
Journal: Polymer Degradation and Stability
DOI: 10.1016/j.polymdegradstab.2017.11.017
Published: January 2018
|
Type: Article
Keywords: Damage characterization | Fiber reinforced epoxy-clay nanocomposites | Mechanical properties | Seawater absorption
Volume: 147
Pages: 103-114
ISSN/eISSN: 01413910/
|
Citations: 41
Article #:
Source ID: 26444
Funding: Defence Research and Development Organisation
|
| 924 |
Title: Optimization of Erosion Wear Influencing Parameters of HVOF Sprayed Pumping Material for Coal-Water Slurry
Authors: Singh J.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2018.10.170
Published: 2018
|
Type: Conference Paper
Keywords: Coal-water slurry | Erosion wear | HVOF coating | Slurry pump | SS304
Volume: 5
Pages: 23789-23795
ISSN/eISSN: /22147853
|
Citations: 36
Article #:
Source ID: 21100370037
Funding:
|
| 925 |
Title: Optimization of Erosion Wear Influencing Parameters of HVOF Sprayed Pumping Material for Coal-Water Slurry
Authors: Singh J.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2018.10.170
Published: 2018
|
Type: Conference Paper
Keywords: Coal-water slurry | Erosion wear | HVOF coating | Slurry pump | SS304
Volume: 5
Pages: 23789-23795
ISSN/eISSN: /22147853
|
Citations: 36
Article #:
Source ID: 21100370037
Funding:
|
| 926 |
Title: Processing and characterization of composite cladding through microwave heating on martensitic steel
Authors: Kaushal S.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/1464420715616139
Published: 1 January 2018
|
Type: Article
Keywords: martensitic stainless steel (SS420) | microstructure | Microwave cladding | Ni-based + SiC composite
Volume: 232
Pages: 80-86
ISSN/eISSN: 14644207/20413076
|
Citations: 34
Article #:
Source ID: 20971
Funding:
|
| 927 |
Title: Problems and prospects of Indian MSMEs: A literature review
Authors: Singh D.
Journal: International Journal of Business Excellence
DOI: 10.1504/IJBEX.2018.091923
Published: 2018
|
Type: Review
Keywords: India | Manufacturing performance | Medium enterprises | Micro | MSMEs | Problems | Small | Technology innovation initiatives
Volume: 15
Pages: 129-188
ISSN/eISSN: 17560047/17560055
|
Citations: 28
Article #:
Source ID: 17700155302
Funding:
|
| 928 |
Title: Tool wear analysis while creating blind holes on float glass using conventional drilling: A multi-shaped tools study
Authors: Sharma A.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-13-1724-8_17
Published: 2018
|
Type: Book Chapter
Keywords: Abrasive tools | Conventional drilling | End face | Float glass | Lateral face | Tool wear
Volume: PartF7
Pages: 175-183
ISSN/eISSN: 21954356/21954364
|
Citations: 20
Article #:
Source ID: 21100431311
Funding:
|
| 929 |
Title: Kinematic modeling of a 7-degree of freedom spatial hybrid manipulator for medical surgery
Authors: Singh A.
Journal: Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
DOI: 10.1177/0954411917741331
Published: 1 January 2018
|
Type: Article
Keywords: D-H parameters | Hybrid manipulator | parallelogram linkage | robot-assisted surgery | spatial links
Volume: 232
Pages: 12-23
ISSN/eISSN: 09544119/20413033
|
Citations: 13
Article #:
Source ID: 16334
Funding:
|
| 930 |
Title: 3D representation and CNC machining of 2D digital images
Authors: Sood S.
Journal:
DOI: 10.1016/j.promfg.2018.07.001
Published: 2018
|
Type: Conference Paper
Keywords: 2D image | 3D surface | CNC Machining | Point cloud data | STL | Toolpath
Volume: 26
Pages: 10-20
ISSN/eISSN: /23519789
|
Citations: 7
Article #:
Source ID: 21101049053
Funding:
|
| 931 |
Title: Design, Development and Application of Nanocoatings
Authors: Singh A.
Journal: Advanced Structured Materials
DOI: 10.1007/978-981-10-6214-8_7
Published: 2018
|
Type: Book Chapter
Keywords: Corrosion Chemical vapour deposition | Hydrophobic and Hydrophilic | Nanocoatings | Thermal spray | Turbines
Volume: 84
Pages: 191-207
ISSN/eISSN: 18698433/18698441
|
Citations: 7
Article #:
Source ID: 21100222542
Funding:
|
| 932 |
Title: Numerical study of nanofluid-based solar collector for humidification-dehumidification (HDH) desalination
Authors: Garg K.
Journal: ASME International Mechanical Engineering Congress and Exposition Proceedings Imece
DOI: 10.1115/IMECE2018-87318
Published: 2018
|
Type: Conference Paper
Keywords:
Volume: 6B-2018
Pages:
ISSN/eISSN: /
|
Citations: 6
Article #:
Source ID: 21100901745
Funding:
|
| 933 |
Title: On the development and characterization of microwave processed Ni + 30% SiC based composite clads
Authors: Kaushal S.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2018.10.006
Published: 2018
|
Type: Conference Paper
Keywords: Composite material | Micro-hardness. | Microstructure | Microwave cladding
Volume: 5
Pages: 27718-27725
ISSN/eISSN: /22147853
|
Citations: 5
Article #:
Source ID: 21100370037
Funding:
|
| 934 |
Title: On processing of Ni–WC8Co-based composite clads on austenitic stainless steel through microwave energy
Authors: Singh D.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-13-1724-8_15
Published: 2018
|
Type: Book Chapter
Keywords: Characterization | Composite material | Microhardness | Microwave cladding
Volume: PartF7
Pages: 153-162
ISSN/eISSN: 21954356/21954364
|
Citations: 4
Article #:
Source ID: 21100431311
Funding: Science and Engineering Research Board
|
| 935 |
Title: Direct Absorption Solar Thermal Technologies
Authors: Khullar V.
Journal: Energy Environment and Sustainability
DOI: 10.1007/978-981-10-7206-2_5
Published: 2018
|
Type: Book Chapter
Keywords: Direct absorption | Nanofluid | Solar selective | Solar thermal | Surface absorption
Volume:
Pages: 81-97
ISSN/eISSN: 25228366/25228374
|
Citations: 4
Article #:
Source ID: 21101041971
Funding:
|
| 936 |
Title: Physical model reduction of a parallel and hybrid manipulator using eigenvalue sensitivity method
Authors: Arora R.
Journal: Iranian Journal of Science and Technology Transactions of Mechanical Engineering
DOI: 10.1007/s40997-017-0088-y
Published: 2018
|
Type: Article
Keywords: Bond graph | Eigenvalue sensitivity | Hybrid manipulator | Physical model reduction
Volume: 42
Pages: 137-147
ISSN/eISSN: 22286187/23641835
|
Citations: 4
Article #:
Source ID: 21100217632
Funding:
|
| 937 |
Title: Effect of Mixing Parameters on Mechanical Properties of Organoclay Epoxy Nanocomposites
Authors: Sharma B.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2017.11.083
Published: 2018
|
Type: Conference Paper
Keywords: Epoxy clay nanocomposites | Failure | Mechanical properties | Taguchi design of experiment | X - ray diffraction
Volume: 5
Pages: 276-286
ISSN/eISSN: /22147853
|
Citations: 4
Article #:
Source ID: 21100370037
Funding:
|
| 938 |
Title: Solar Thermal Energy: Use of Volumetric Absorption in Domestic Applications
Authors: Bhalla V.
Journal: Energy Environment and Sustainability
DOI: 10.1007/978-981-10-7206-2_6
Published: 2018
|
Type: Book Chapter
Keywords: Direct absorption solar thermal collector | Heat transfer | Nanofluid | Volume fraction
Volume:
Pages: 99-112
ISSN/eISSN: 25228366/25228374
|
Citations: 3
Article #:
Source ID: 21101041971
Funding:
|
| 939 |
Title: Performance enhancement of solar photovoltaic cooling using water sprinkler
Authors: Nasir N.N.M.
Journal: International Journal of Engineering and Technology Uae
DOI:
Published: 2018
|
Type: Article
Keywords: Forced convection | Renewable energy | Solar energy | Solar PV | Water cooling
Volume: 7
Pages: 32-37
ISSN/eISSN: /2227524X
|
Citations: 3
Article #:
Source ID: 21100805731
Funding:
|
| 940 |
Title: Multi-optimisation of electric discharge machining parameters for cryogenically treated pure titanium using grey-Taguchi technique
Authors: Kumar S.
Journal: International Journal of Machining and Machinability of Materials
DOI: 10.1504/IJMMM.2018.093532
Published: 2018
|
Type: Article
Keywords: Analysis of variance | ANOVA | Cryogenic treatment | EDM | Electric discharge machining | GRA | Grey relational analysis | Optimisation | Taguchi
Volume: 20
Pages: 214-235
ISSN/eISSN: 17485711/1748572X
|
Citations: 1
Article #:
Source ID: 12400154711
Funding:
|
| 941 |
Title: Micromechanical interactions and their relation to stress field for different classes of reinforced polymer composites
Authors: Jain D.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2018.06.360
Published: 2018
|
Type: Conference Paper
Keywords: Cohesive failure | Fibre reinforced polymer composites | Mechanical loading | Micormechanics
Volume: 5
Pages: 19944-19953
ISSN/eISSN: /22147853
|
Citations: 1
Article #:
Source ID: 21100370037
Funding:
|
| 942 |
Title: Moisture diffusion along the layered fibre matrix composites with different fibre orientations
Authors: Vats S.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2018.06.362
Published: 2018
|
Type: Conference Paper
Keywords: Fiber reinforced polymers (FRPs) | Fick's law | Moisture diffusion | Three dimensional models
Volume: 5
Pages: 19963-19968
ISSN/eISSN: /22147853
|
Citations: 1
Article #:
Source ID: 21100370037
Funding:
|
| 943 |
Title: An Investigation on Leaching Characteristics for Indian Bottom Ash
Authors: Singh G.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2018.10.162
Published: 2018
|
Type: Conference Paper
Keywords: Bottom ash | Environmental impact | Leachate | Physio-chemical properties | Tracing elements
Volume: 5
Pages: 23720-23725
ISSN/eISSN: /22147853
|
Citations: 1
Article #:
Source ID: 21100370037
Funding:
|
| 944 |
Title: Investigations on fabrication techniques of aluminium-based porous material
Authors: Singh D.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-981-13-1724-8_21
Published: 2018
|
Type: Book Chapter
Keywords: CaCO3 | CNC drilling | Gas-releasing blowing agent | Pure aluminium | SEM
Volume: PartF7
Pages: 219-227
ISSN/eISSN: 21954356/21954364
|
Citations: 1
Article #:
Source ID: 21100431311
Funding:
|
| 945 |
Title: Effect of process parameters on shrinkage of acrylonitrile butadiene styrene parts fabricated by 3D printing process
Authors: Singh S.
Journal: Springer Proceedings in Physics
DOI: 10.1007/978-3-319-78919-4_9
Published: 2018
|
Type: Conference Paper
Keywords:
Volume: 207
Pages: 109-118
ISSN/eISSN: 09308989/18674941
|
Citations: 0
Article #:
Source ID: 21100296235
Funding:
|
| 946 |
Title: Parametric optimization for nano-finishing of the external cylindrical surfaces using rotating core magnetorheological finishing process
Authors: Singh M.
Journal: ASME 2018 13th International Manufacturing Science and Engineering Conference Msec 2018
DOI: 10.1115/MSEC2018-6597
Published: 2018
|
Type: Conference Paper
Keywords: Cylindrical | External surface | Magnetic flux density | Magnetorheological finishing | Optimization | Process | Roughness
Volume: 4
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21100881650
Funding:
|
| 947 |
Title: Numerical modelling of thermal energy storage using phase change materials: Energy efficient buildings application
Authors: Salvi S.S.
Journal: International Conference on Computational Methods for Thermal Problems
DOI:
Published: 2018
|
Type: Conference Paper
Keywords: Energy efficient buildings | Numerical modelling | Phase change material | Thermal analysis | Thermal energy storage
Volume: 0
Pages: 870-873
ISSN/eISSN: 23055995/23056924
|
Citations: 0
Article #:
Source ID: 21100877657
Funding:
|
| 948 |
Title: Noise barriers as an abatement strategy
Authors: Singh D.
Journal: Journal of Scientific and Industrial Research
DOI:
Published: 2018
|
Type: Article
Keywords: Acoustic barrier design | Barrier nomograph | Fresnel number | Noise barrier | Traffic noise
Volume: 77
Pages: 472-477
ISSN/eISSN: 00224456/
|
Citations: 0
Article #:
Source ID: 23649
Funding:
|
| 949 |
Title: Community-level solar thermal systems
Authors: Bhalla V.
Journal: Wind and Solar Based Energy Systems for Communities
DOI: 10.1049/PBPO130E.ch5
Published: 1 January 2018
|
Type: Book Chapter
Keywords: Absorption | Collector efficiency | Community level | Community-level solar thermal systems | Concentrating type solar collectors | Energy generation rate | Fluid outlet temperature | Hot water | Nanoparticle-laden fluids | Nanoparticles | Numerical analysis | Numerical approximation and analysis | Numerical model | Performance evaluation parameters | photothermal conversion | Solar absorber-convertors | Solar collectors, concentrators and control films: optical aspects | Solar energy | Solar energy concentrators | Solar power | Solar thermal energy | Spatial temperature distribution | spectral intensity | Surface-based absorption | Temperature distribution
Volume:
Pages: 95-117
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21101063203
Funding:
|
| 950 |
Title: Thermal performance of direct absorption solar collector based single stage flashing desalination system
Authors: Garg K.
Journal: International Conference on Computational Methods for Thermal Problems
DOI:
Published: 2018
|
Type: Conference Paper
Keywords: Direct absorption solar collector | Flash desalination | Gained output ratio | Nano-particles | Solar energy
Volume: 0
Pages: 379-383
ISSN/eISSN: 23055995/23056924
|
Citations: 0
Article #:
Source ID: 21100877657
Funding:
|
| 951 |
Title: A new non-polynomial four variable shear deformation theory in axiomatic formulation for hygro-thermo-mechanical analysis of laminated composite plates
Authors: Joshan Y.S.
Journal: Composite Structures
DOI: 10.1016/j.compstruct.2017.09.029
Published: 15 December 2017
|
Type: Article
Keywords: Cross-ply plates | Hygro-thermal analysis | Laminated composite plates | Navier solution
Volume: 182
Pages: 685-693
ISSN/eISSN: 02638223/
|
Citations: 56
Article #:
Source ID: 15063
Funding: Science and Engineering Research Board
|
| 952 |
Title: Role of recrystallization and pearlite dissolution in industrial processing of DP590 steels
Authors: Singh V.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2017.1317792
Published: 10 December 2017
|
Type: Article
Keywords: Annealing | austenite | dual-phase | pearlite | properties | recrystallization | tensile
Volume: 32
Pages: 1806-1816
ISSN/eISSN: 10426914/15322475
|
Citations: 5
Article #:
Source ID: 21054
Funding:
|
| 953 |
Title: Lower-limb exoskeletons: Research trends and regulatory guidelines in medical and non-medical applications
Authors: Rupal B.S.
Journal: International Journal of Advanced Robotic Systems
DOI: 10.1177/1729881417743554
Published: 1 December 2017
|
Type: Review
Keywords: disability technologies | Lower-limb exoskeletons | medical/non-medical regulations | mobility augmentation | wearable robots
Volume: 14
Pages:
ISSN/eISSN: 17298806/17298814
|
Citations: 197
Article #:
Source ID: 144749
Funding:
|
| 954 |
Title: Addition of nanoclay and compatibilized EPDM rubber for improved impact strength of epoxy glass fiber composites
Authors: Singh K.
Journal: Composites Part A Applied Science and Manufacturing
DOI: 10.1016/j.compositesa.2017.10.009
Published: December 2017
|
Type: Article
Keywords: A. Polymer-matrix composites (PMCs) | B. Impact behaviour | D. Mechanical testing | E. Surface treatment | Glass fiber reinforced polymer (GFRP) nanocomposites
Volume: 103
Pages: 263-271
ISSN/eISSN: 1359835X/
|
Citations: 33
Article #:
Source ID: 20540
Funding:
|
| 955 |
Title: Multi-objective performance investigation of orthopaedic bone drilling using Taguchi membership function
Authors: Singh G.
Journal: Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
DOI: 10.1177/0954411917735129
Published: 1 December 2017
|
Type: Article
Keywords: Bone | bone fracture | force | multi-objective optimization | surface roughness | surgery | Taguchi
Volume: 231
Pages: 1133-1139
ISSN/eISSN: 09544119/20413033
|
Citations: 30
Article #:
Source ID: 16334
Funding:
|
| 956 |
Title: Influence of nanoparticle fillers content on the bearing strength behavior of glass fiber-reinforced epoxy composites pin joints
Authors: Sekhon M.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/1464420715607556
Published: 1 December 2017
|
Type: Article
Keywords: Glass fiber | laminates | mechanical testing | nanoparticle fillers | pin joints
Volume: 231
Pages: 641-656
ISSN/eISSN: 14644207/20413076
|
Citations: 16
Article #:
Source ID: 20971
Funding:
|
| 957 |
Title: Numerical simulation of fluidized dense-phase pneumatic conveying of powders to develop improved model for solids friction factor
Authors: Kaur B.
Journal: Particuology
DOI: 10.1016/j.partic.2016.11.006
Published: December 2017
|
Type: Article
Keywords: Dense-phase | Numerical analysis | Pneumatic conveying | Pressure drop | Scale-up validation
Volume: 35
Pages: 42-50
ISSN/eISSN: 16742001/22104291
|
Citations: 5
Article #:
Source ID: 10900153324
Funding: University Grants Commission
|
| 958 |
Title: Construction and operations of first salinity gradient solar pond in Malaysia
Authors: Baharin N.
Journal: Journal of Mechanical Engineering
DOI:
Published: 1 December 2017
|
Type: Article
Keywords: Salinity gradient solar pond | Solar pond
Volume: SI 4
Pages: 217-235
ISSN/eISSN: 18235514/2550164X
|
Citations: 2
Article #:
Source ID: 21100198715
Funding:
|
| 959 |
Title: Channels of interaction and past collaborative experience as imperatives in academia–industry collaboration
Authors: Bhullar S.
Journal: Technology Analysis and Strategic Management
DOI: 10.1080/09537325.2016.1277694
Published: 26 November 2017
|
Type: Article
Keywords: India | Industry–academic relations | mediation | partial least squares structural equation modelling
Volume: 29
Pages: 1210-1224
ISSN/eISSN: 09537325/14653990
|
Citations: 11
Article #:
Source ID: 14715
Funding:
|
| 960 |
Title: Optimization of safflower oil transesterification using the Taguchi approach
Authors: Kumar N.
Journal: Petroleum Science
DOI: 10.1007/s12182-017-0183-0
Published: 1 November 2017
|
Type: Article
Keywords: ANOVA | Biodiesel | Optimization | Taguchi approach | Transesterification
Volume: 14
Pages: 798-805
ISSN/eISSN: 16725107/19958226
|
Citations: 38
Article #:
Source ID: 11900154312
Funding:
|
| 961 |
Title: On Microstructure and Wear Behavior of Microwave Processed Composite Clad
Authors: Kaushal S.
Journal: Journal of Tribology
DOI: 10.1115/1.4035844
Published: 1 November 2017
|
Type: Article
Keywords: cladding | dry sliding wear | microstructure | microwave | Ni-based powder
Volume: 139
Pages:
ISSN/eISSN: 07424787/15288897
|
Citations: 32
Article #: 061602
Source ID: 17014
Funding:
|
| 962 |
Title: Analytical modelling for thermo-mechanical analysis of cross-ply and angle-ply laminated composite plates
Authors: Joshan Y.S.
Journal: Aerospace Science and Technology
DOI: 10.1016/j.ast.2017.07.041
Published: November 2017
|
Type: Article
Keywords: Cross-ply and angle-ply plates | Laminated composite plates | Navier solution | Shear deformation theory | Thermo-mechanical analysis
Volume: 70
Pages: 137-151
ISSN/eISSN: 12709638/
|
Citations: 24
Article #:
Source ID: 12507
Funding: 1675 Foundation
|
| 963 |
Title: A Simplified Micromechanical Modeling Approach to Predict the Tensile Flow Curve Behavior of Dual-Phase Steels
Authors: Nanda T.
Journal: Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-017-2979-x
Published: 1 November 2017
|
Type: Article
Keywords: dual-phase steels | ferrite | flow curves | martensite | micromechanical modeling
Volume: 26
Pages: 5180-5187
ISSN/eISSN: 10599495/15441024
|
Citations: 3
Article #:
Source ID: 21160
Funding:
|
| 964 |
Title: Multi-objective parametric optimization using the grey-taguchi approach for powder mixed electric discharge machining of grade-ii titanium alloy with cryogenically treated electrodes
Authors: Kumar S.
Journal: Indian Journal of Engineering and Materials Sciences
DOI:
Published: October 2017
|
Type: Article
Keywords: ANOVA | Cryogenic treatment | EDM | GRA | Powder | Taguchi method | Titanium
Volume: 24
Pages: 339-350
ISSN/eISSN: 09714588/09751017
|
Citations: 7
Article #:
Source ID: 29812
Funding:
|
| 965 |
Title: Drop and tilt method of five-axis tool positioning for tensor product surfaces
Authors: Duvedi R.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-017-0548-y
Published: 1 October 2017
|
Type: Article
Keywords: CNC machining | Five-axis machining | Multipoint machining
Volume: 93
Pages: 617-622
ISSN/eISSN: 02683768/14333015
|
Citations: 4
Article #:
Source ID: 20428
Funding: Natural Sciences and Engineering Research Council of Canada
|
| 966 |
Title: Hydraulic flow model of plant organs in response to physical and environmental factors
Authors: Lahkar B.K.
Journal: Simulation
DOI: 10.1177/0037549717712606
Published: 1 October 2017
|
Type: Article
Keywords: bond graph | Hydraulic flow model | mechanical equivalence | transpiration | water dynamics | water potential
Volume: 93
Pages: 869-882
ISSN/eISSN: 00375497/17413133
|
Citations: 1
Article #:
Source ID: 14452
Funding:
|
| 967 |
Title: Corrosion behaviour of Cr3C2-NiCr coated superalloys under actual medical waste incinerator
Authors: Mudgal D.
Journal: Surface and Coatings Technology
DOI: 10.1016/j.surfcoat.2017.06.050
Published: 25 September 2017
|
Type: Article
Keywords: Coating | Corrosion | Incineration
Volume: 325
Pages: 145-156
ISSN/eISSN: 02578972/
|
Citations: 22
Article #:
Source ID: 24537
Funding:
|
| 968 |
Title: ANFIS based kinematic analysis of a 4-DOFs SCARA robot
Authors: Narayan J.
Journal: 4th IEEE International Conference on Signal Processing Computing and Control Ispcc 2017
DOI: 10.1109/ISPCC.2017.8269676
Published: 24 September 2017
|
Type: Conference Paper
Keywords: ANFIS | Gaussian membership function | Inverse kinematics | path generation | SCARA robot
Volume: 2017-January
Pages: 205-211
ISSN/eISSN: /
|
Citations: 23
Article #:
Source ID: 21100883525
Funding:
|
| 969 |
Title: Effect of hygrothermal aging on GFRP composites in marine environment
Authors: Garg M.
Journal: Steel and Composite Structures
DOI: 10.12989/scs.2017.25.1.093
Published: 20 September 2017
|
Type: Article
Keywords: Damage mechanism | Environmental degradation | GFRP | Marine environment | Mechanical properties | Non-destructive testing | Polymer composites
Volume: 25
Pages: 93-104
ISSN/eISSN: 12299367/
|
Citations: 6
Article #:
Source ID: 28423
Funding:
|
| 970 |
Title: Failure investigation of fused deposition modelling parts fabricated at different raster angles under tensile and flexural loading
Authors: Garg A.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/0954405415617447
Published: 1 September 2017
|
Type: Article
Keywords: failure | flexural strength | Fused deposition modelling | scanning electron microscope | surface roughness | tensile strength
Volume: 231
Pages: 2031-2039
ISSN/eISSN: 09544054/20412975
|
Citations: 48
Article #:
Source ID: 20406
Funding: Institute of Infection and Immunity
|
| 971 |
Title: Kinematic Modeling of Robotic Manipulators
Authors: Singh A.
Journal: Proceedings of the National Academy of Sciences India Section A Physical Sciences
DOI: 10.1007/s40010-016-0285-x
Published: 1 September 2017
|
Type: Article
Keywords: D–H parameters | Kinematic modeling | Open- and closed-loop chains | Robotic manipulators
Volume: 87
Pages: 303-319
ISSN/eISSN: 03698203/22501762
|
Citations: 23
Article #:
Source ID: 5200152621
Funding:
|
| 972 |
Title: Spot nanofinishing using ball nose magnetorheological solid rotating core tool
Authors: Khurana A.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-017-0166-8
Published: 1 September 2017
|
Type: Article
Keywords: Finishing | Magnetic flux density | Magnetorheological | Miniature surface | MR polishing fluid | Roughness | Spot
Volume: 92
Pages: 1173-1183
ISSN/eISSN: 02683768/14333015
|
Citations: 10
Article #:
Source ID: 20428
Funding:
|
| 973 |
Title: Effect of metallic inserts on the strength of pin joints prepared from glass fiber reinforced composites
Authors: Singh K.
Journal: Defence Science Journal
DOI: 10.14429/dsj.67.11041
Published: September 2017
|
Type: Article
Keywords: Glass fiber | Hashin failure criteria | Metal inserts | Pin joints | Progressive damage analysis
Volume: 67
Pages: 592-600
ISSN/eISSN: 0011748X/0976464X
|
Citations: 4
Article #:
Source ID: 17294
Funding:
|
| 974 |
Title: Effect of inter-critical annealing parameters on ferrite recrystallization and austenite formation in DP 590 steel
Authors: Mittal M.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2016.1257804
Published: 18 August 2017
|
Type: Article
Keywords: Activation energy | annealing | austenite-formation | dual-phase | JMAK | recrystallization
Volume: 32
Pages: 1231-1238
ISSN/eISSN: 10426914/15322475
|
Citations: 5
Article #:
Source ID: 21054
Funding:
|
| 975 |
Title: Modelling of two phase solid-liquid flow in horizontal pipe using computational fluid dynamics technique
Authors: Singh J.P.
Journal: International Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2017.06.060
Published: 3 August 2017
|
Type: Article
Keywords: Bottom ash | Computational fluid dynamics (CFD) | Fly ash | Pipeline | Pressure drop characteristics
Volume: 42
Pages: 20133-20137
ISSN/eISSN: 03603199/
|
Citations: 65
Article #:
Source ID: 26991
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 976 |
Title: Application of Taguchi method in the optimization of geometric parameters for double pin joint configurations made from glass–epoxy nanoclay laminates
Authors: Singh M.
Journal: Journal of Composite Materials
DOI: 10.1177/0021998316678920
Published: 1 August 2017
|
Type: Article
Keywords: characteristic curve | Double pin joint configurations | glass reinforced | nanoclay | Taguchi method | Tsai–Wu failure criterion
Volume: 51
Pages: 2689-2706
ISSN/eISSN: 00219983/1530793X
|
Citations: 21
Article #:
Source ID: 21140
Funding:
|
| 977 |
Title: On the Microstructure and Wear Behavior of Fe–xCr–4Mn–3C Hardfacing Alloys
Authors: Singla Y.K.
Journal: Transactions of the Indian Institute of Metals
DOI: 10.1007/s12666-016-0953-1
Published: 1 August 2017
|
Type: Article
Keywords: Dry sliding wear | M7C3 carbide | Microstructure
Volume: 70
Pages: 1555-1561
ISSN/eISSN: 09722815/09751645
|
Citations: 5
Article #:
Source ID: 12149
Funding:
|
| 978 |
Title: Nano-surface-finishing of permanent mold punch using magnetorheological fluid-based finishing processes
Authors: Maan S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2016.1232823
Published: 4 July 2017
|
Type: Article
Keywords: caps | dies | magnetorheological | molds | nanofinishing | permanent | Plastic | roughness | surface
Volume: 32
Pages: 1004-1010
ISSN/eISSN: 10426914/15322475
|
Citations: 42
Article #:
Source ID: 21054
Funding:
|
| 979 |
Title: Investigation of Dry Sliding Wear Behavior of Ni-SiC Microwave Cladding
Authors: Kaushal S.
Journal: Journal of Tribology
DOI: 10.1115/1.4035147
Published: 1 July 2017
|
Type: Article
Keywords: composite | microstructure | microwave cladding | sliding wear
Volume: 139
Pages:
ISSN/eISSN: 07424787/15288897
|
Citations: 48
Article #: 041603
Source ID: 17014
Funding:
|
| 980 |
Title: Compatibilization of polypropylene fibers in epoxy based GFRP/clay nanocomposites for improved impact strength
Authors: Singh K.
Journal: Composites Part A Applied Science and Manufacturing
DOI: 10.1016/j.compositesa.2017.03.027
Published: 1 July 2017
|
Type: Article
Keywords: A. Fibers | A. Polymer-matrix composites (PMCs) | B. Impact behaviour | D. Mechanical testing
Volume: 98
Pages: 207-217
ISSN/eISSN: 1359835X/
|
Citations: 31
Article #:
Source ID: 20540
Funding:
|
| 981 |
Title: Influence of parametric uncertainties on the deflection statistics of general laminated composite and sandwich plates
Authors: Grover N.
Journal: Composite Structures
DOI: 10.1016/j.compstruct.2017.03.036
Published: 1 July 2017
|
Type: Article
Keywords: Finite element analysis | First order perturbation technique | Laminated composite plates | Sandwich plates | Uncertainty quantification
Volume: 171
Pages: 158-169
ISSN/eISSN: 02638223/
|
Citations: 24
Article #:
Source ID: 15063
Funding:
|
| 982 |
Title: Application of a hybrid Taguchi-entropy weight-based GRA method to optimize and neural network approach to predict the machining responses in ultrasonic machining of Ti–6Al–4V
Authors: Dhuria G.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-016-0627-2
Published: 1 July 2017
|
Type: Article
Keywords: Artificial neural network | Entropy weight-based GRA | Titanium | Ultrasonic machining
Volume: 39
Pages: 2619-2634
ISSN/eISSN: 16785878/18063691
|
Citations: 23
Article #:
Source ID: 71359
Funding:
|
| 983 |
Title: Investigating surface properties of cryogenically treated titanium alloys in powder mixed electric discharge machining
Authors: Kumar S.
Journal: Journal of the Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-016-0639-y
Published: 1 July 2017
|
Type: Article
Keywords: Cryogenic treatment | EDM | Material transfer | Micro-hardness | Surface modification | Taguchi | Titanium
Volume: 39
Pages: 2635-2648
ISSN/eISSN: 16785878/18063691
|
Citations: 23
Article #:
Source ID: 71359
Funding:
|
| 984 |
Title: Preliminary metallurgical and mechanical investigations of microwave processed hastelloy joints
Authors: Singh S.
Journal: Journal of Manufacturing Science and Engineering Transactions of the ASME
DOI: 10.1115/1.4035370
Published: 1 June 2017
|
Type: Article
Keywords: fractography | Hastelloy | joining | microhardness | microstructure | microwaves | tensile strength
Volume: 139
Pages:
ISSN/eISSN: 10871357/15288935
|
Citations: 26
Article #: 064503
Source ID: 20966
Funding:
|
| 985 |
Title: Machining performance of cryogenically treated Ti-5Al-2.5Sn titanium alloy in electric discharge machining: A comparative study
Authors: Kumar S.
Journal: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
DOI: 10.1177/0954406215628030
Published: 1 June 2017
|
Type: Article
Keywords: deep cryogenic treatment | Electric discharge machining | material removal rate | microhardness | shallow cryogenic treatment | Surface roughness | titanium alloys | tool wear rate
Volume: 231
Pages: 2017-2024
ISSN/eISSN: 09544062/20412983
|
Citations: 24
Article #:
Source ID: 20407
Funding:
|
| 986 |
Title: Effect of time dependent nanoclusters morphology on the thermal conductivity and heat transport mechanism of TiO2 based nanofluid
Authors: Kundan L.
Journal: Heat and Mass Transfer Waerme Und Stoffuebertragung
DOI: 10.1007/s00231-016-1945-8
Published: 1 June 2017
|
Type: Article
Keywords:
Volume: 53
Pages: 1873-1892
ISSN/eISSN: 09477411/14321181
|
Citations: 6
Article #:
Source ID: 13749
Funding:
|
| 987 |
Title: Modelling and analysis of creep in a variable thickness rotating FGM disc using tresca and von mises criteria
Authors: Khanna K.
Journal: Iranian Journal of Science and Technology Transactions of Mechanical Engineering
DOI: 10.1007/s40997-016-0051-3
Published: 1 June 2017
|
Type: Article
Keywords: Creep | FGM | Rotating disc | Tresca criterion | von Mises criterion
Volume: 41
Pages: 109-119
ISSN/eISSN: 22286187/
|
Citations: 5
Article #:
Source ID: 21100217632
Funding:
|
| 988 |
Title: Prediction and optimization of nanoclusters-based thermal conductivity of nanofluids: Application of Box–Behnken design (BBD)
Authors: Kundan L.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2016.1152336
Published: 4 May 2017
|
Type: Article
Keywords: Box–Behnken design | clusters | nanofluids | response surface methodology | surfactant | thermal conductivity
Volume: 35
Pages: 265-276
ISSN/eISSN: 02726351/15480046
|
Citations: 9
Article #:
Source ID: 13661
Funding:
|
| 989 |
Title: Biodiesel production from frying oil using zinc-doped calcium oxide as heterogeneous catalysts
Authors: Kataria J.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2016.1270376
Published: 3 May 2017
|
Type: Article
Keywords: Calcination temperature | calcium oxide | heterogeneous catalysts | transesterification | waste cooking oil | zinc oxide
Volume: 39
Pages: 861-866
ISSN/eISSN: 15567036/15567230
|
Citations: 14
Article #:
Source ID: 4500151514
Funding:
|
| 990 |
Title: An investigation into the effect of nanoclusters growth on perikinetic heat conduction mechanism in an oxide based nanofluid
Authors: Kundan L.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2017.01.095
Published: 15 April 2017
|
Type: Article
Keywords: DLVO | Liquid layering | Modified models | Nanoclusters | Stability ratio | Thermal conductivity
Volume: 311
Pages: 273-286
ISSN/eISSN: 00325910/1873328X
|
Citations: 13
Article #:
Source ID: 13717
Funding:
|
| 991 |
Title: Development of magnetorheological finishing process for external cylindrical surfaces
Authors: Singh G.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2016.1221082
Published: 4 April 2017
|
Type: Article
Keywords: Cylindrical | external | finishing | fluid | magnetorheological | roughness | surfaces | tool
Volume: 32
Pages: 581-588
ISSN/eISSN: 10426914/15322475
|
Citations: 47
Article #:
Source ID: 21054
Funding:
|
| 992 |
Title: A novel magnetorheological honing process for nano-finishing of variable cylindrical internal surfaces
Authors: Grover V.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2016.1257801
Published: 4 April 2017
|
Type: Article
Keywords: Cylindrical | finishing | fluids | honing | magnetorheological | process | roughness | surfaces
Volume: 32
Pages: 573-580
ISSN/eISSN: 10426914/15322475
|
Citations: 30
Article #:
Source ID: 21054
Funding: Science and Engineering Research Board
|
| 993 |
Title: Model reduction in vehicle dynamic systems
Authors: Singh R.
Journal: International Journal of Modelling and Simulation
DOI: 10.1080/02286203.2016.1273040
Published: 3 April 2017
|
Type: Article
Keywords: bicycle vehicle model | bond-graph | eigenvalue sensitivity | eigenvalue separation | four wheel model | Physical model reduction
Volume: 37
Pages: 67-81
ISSN/eISSN: 02286203/19257082
|
Citations: 8
Article #:
Source ID: 21112
Funding: University Grants Commission
|
| 994 |
Title: A simple, efficient and accurate Bézier extraction based T-spline XIGA for crack simulations
Authors: Singh S.K.
Journal: Theoretical and Applied Fracture Mechanics
DOI: 10.1016/j.tafmec.2016.12.002
Published: 1 April 2017
|
Type: Article
Keywords: Bézier element | Bézier extraction | Extended isogeometric analysis | Stress intensity factors | T-spline
Volume: 88
Pages: 74-96
ISSN/eISSN: 01678442/
|
Citations: 84
Article #:
Source ID: 14588
Funding:
|
| 995 |
Title: Modeling the tool wear rate in powder mixed electro-discharge machining of titanium alloys using dimensional analysis of cryogenically treated electrodes and workpiece
Authors: Kumar S.
Journal: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
DOI: 10.1177/0954408915593875
Published: 1 April 2017
|
Type: Article
Keywords: cryogenic treatment | dimensional analysis | Electric discharge machining | Taguchi method | titanium alloys | tool wear rate
Volume: 231
Pages: 271-282
ISSN/eISSN: 09544089/20413009
|
Citations: 39
Article #:
Source ID: 20408
Funding:
|
| 996 |
Title: Monitoring degradation in concrete filled steel tubular sections using guided waves
Authors: Beena K.
Journal: Smart Structures and Systems
DOI: 10.12989/sss.2017.19.4.371
Published: April 2017
|
Type: Article
Keywords: Concrete filled steel tubular sections | Corrosion | Delamination | Guided waves | Notching
Volume: 19
Pages: 371-382
ISSN/eISSN: 17381584/17381991
|
Citations: 18
Article #:
Source ID: 5300152722
Funding:
|
| 997 |
Title: Modelling of autonomic regulation in cardiovascular system based on baroreflex mechanism and overwhelming controller
Authors: Sharma K.
Journal: Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering
DOI: 10.1177/0959651817698351
Published: April 2017
|
Type: Article
Keywords: autonomic nervous system | baroreflex | blood pressure | bond graph | Cardiovascular system | maximum elastance | overwhelming controller
Volume: 231
Pages: 299-311
ISSN/eISSN: 09596518/20413041
|
Citations: 3
Article #:
Source ID: 20409
Funding:
|
| 998 |
Title: Properties of Glass-Fiber Hybrid Composites: A Review
Authors: Singh J.
Journal: Polymer Plastics Technology and Engineering
DOI: 10.1080/03602559.2016.1233271
Published: 24 March 2017
|
Type: Review
Keywords: Aging conditions | glass-fiber composites | hybrid composite | mechanical properties | natural fibers | polymer-reinforced composite | synthetic fibers | water absorption
Volume: 56
Pages: 455-469
ISSN/eISSN: 03602559/15256111
|
Citations: 135
Article #:
Source ID: 26450
Funding:
|
| 999 |
Title: Curing studies and mechanical properties of glass fiber reinforced composites based on silanized clay minerals
Authors: Sharma B.
Journal: Applied Clay Science
DOI: 10.1016/j.clay.2016.12.038
Published: 15 March 2017
|
Type: Article
Keywords: Fiber reinforced clay-epoxy nanocomposites | Mechanical properties | Morphology | Silylated Mt. | Thermal properties
Volume: 138
Pages: 89-99
ISSN/eISSN: 01691317/
|
Citations: 31
Article #:
Source ID: 24614
Funding: Defence Research and Development Organisation
|
| 1000 |
Title: Chemical vapor treatment of ABS parts built by FDM: Analysis of surface finish and mechanical strength
Authors: Garg A.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-016-9257-1
Published: 1 March 2017
|
Type: Article
Keywords: Build cost | Cold vapor treatment | Mechanical strength | Part orientation | Raster angle | Surface roughness
Volume: 89
Pages: 2175-2191
ISSN/eISSN: 02683768/14333015
|
Citations: 150
Article #:
Source ID: 20428
Funding:
|
| 1001 |
Title: Trajectory tracking through overwhelming control of human vertebrae as a hybrid manipulator
Authors: Arora R.
Journal: Simulation
DOI: 10.1177/0037549716686404
Published: 1 March 2017
|
Type: Article
Keywords: bond graph | flexibility | hybrid manipulator | leg inertia | overwhelming controller | trajectory tracking | Vertebrae
Volume: 93
Pages: 251-263
ISSN/eISSN: 00375497/17413133
|
Citations: 4
Article #:
Source ID: 14452
Funding:
|
| 1002 |
Title: SimMechanics™ based modeling, simulation and real-time control of Rotary Inverted Pendulum
Authors: Kathpal A.
Journal: Proceedings of 2017 11th International Conference on Intelligent Systems and Control Isco 2017
DOI: 10.1109/ISCO.2017.7855975
Published: 14 February 2017
|
Type: Conference Paper
Keywords: LQR | MATLAB | PD control | Pole Placement | QUBE-Servo | Rotary Inverted Pendulum | SimMechanics™
Volume:
Pages: 166-172
ISSN/eISSN: /
|
Citations: 23
Article #: 7855975
Source ID: 21100800612
Funding:
|
| 1003 |
Title: An experimental investigation into modeling solids friction for fluidized dense-phase pneumatic transport of powders
Authors: Setia G.
Journal: Particuology
DOI: 10.1016/j.partic.2016.03.004
Published: 1 February 2017
|
Type: Article
Keywords: Dimensionless velocity | Fluidized dense-phase | Pneumatic transport | Scale-up | Solids friction factor | Volumetric loading ratio
Volume: 30
Pages: 83-91
ISSN/eISSN: 16742001/
|
Citations: 8
Article #:
Source ID: 10900153324
Funding:
|
| 1004 |
Title: Effect of tool and drilling parameters on surface topography of bone drilled holes: An in vitro study
Authors: Singh G.
Journal: 2016 International Conference for Students on Applied Engineering Icsae 2016
DOI: 10.1109/ICSAE.2016.7810187
Published: 6 January 2017
|
Type: Conference Paper
Keywords: Bone | Bone drilling | Scanning electron microscopy (SEM) | Surface roughness
Volume:
Pages: 196-200
ISSN/eISSN: /
|
Citations: 4
Article #: 7810187
Source ID: 21100801144
Funding:
|
| 1005 |
Title: Evaluation of corrosion performance of Superni 600 hung in secondary chamber of medical waste incinerator operating at 1050 °C
Authors: Mudgal D.
Journal: Materials at High Temperatures
DOI: 10.1080/09603409.2016.1234663
Published: 2 January 2017
|
Type: Article
Keywords: corrosion | Incineration | superalloy
Volume: 34
Pages: 45-52
ISSN/eISSN: 09603409/
|
Citations: 8
Article #:
Source ID: 17798
Funding:
|
| 1006 |
Title: Effect of thermal cycling process parameters on recrystallization kinetics for processing of fine-grained pure copper
Authors: Nanda T.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2016.1140190
Published: 2 January 2017
|
Type: Article
Keywords: Annealing | bi-modal | calorimetry | cold deformation | conductivity | dislocation density | microhardness | recrystallization | strength | thermal cycling
Volume: 32
Pages: 34-43
ISSN/eISSN: 10426914/15322475
|
Citations: 7
Article #:
Source ID: 21054
Funding:
|
| 1007 |
Title: The effect of compression ratio on the performance and emission characteristics of a dual fuel diesel engine using biomass derived producer gas
Authors: Lal S.
Journal: Applied Thermal Engineering
DOI: 10.1016/j.applthermaleng.2017.03.038
Published: 2017
|
Type: Article
Keywords: Compression ratio | Dual fuel | Emission | Heat release rate | Peak pressure | Producer gas
Volume: 119
Pages: 63-72
ISSN/eISSN: 13594311/
|
Citations: 88
Article #:
Source ID: 13688
Funding:
|
| 1008 |
Title: Modeling and simulation of surface roughness in magnetorheological fluid based honing process
Authors: Paswan S.K.
Journal: Wear
DOI: 10.1016/j.wear.2016.11.025
Published: 2017
|
Type: Article
Keywords: Ferromagnetic | Magnetic field | Magnetorheological finishing | Normal force | Surface roughness | Wear mechanism, Surface finishing
Volume: 376-377
Pages: 1207-1221
ISSN/eISSN: 00431648/
|
Citations: 69
Article #:
Source ID: 22156
Funding:
|
| 1009 |
Title: Tribological analysis of WC–10Co–4Cr and Ni–20Cr2O3 coating on stainless steel 304
Authors: Singh J.
Journal: Wear
DOI: 10.1016/j.wear.2017.01.032
Published: 2017
|
Type: Article
Keywords: Centrifugal slurry pump | Erosion wear | Fly ash | HVOF coating | Rotational speed | Sand | Stainless steel 304
Volume: 376-377
Pages: 1105-1111
ISSN/eISSN: 00431648/
|
Citations: 68
Article #:
Source ID: 22156
Funding:
|
| 1010 |
Title: Numerical optimization and convective thermal loss analysis of improved solar parabolic trough collector receiver system with one sided thermal insulation
Authors: Chandra Y.P.
Journal: Solar Energy
DOI: 10.1016/j.solener.2017.02.051
Published: 2017
|
Type: Article
Keywords: Air filled annulus receiver | Computational fluid dynamics | Convective heat loss | Parabolic trough collector | Thermal insulation
Volume: 148
Pages: 36-48
ISSN/eISSN: 0038092X/
|
Citations: 50
Article #:
Source ID: 13333
Funding:
|
| 1011 |
Title: Effect of cryogenically treated copper-tungsten electrode on tool wear rate during electro-discharge machining of Ti-5Al-2.5Sn alloy
Authors: Kumar S.
Journal: Wear
DOI: 10.1016/j.wear.2017.01.067
Published: 2017
|
Type: Article
Keywords: ANOVA | Deep cryogenic treatment | Electric discharge machining | Taguchi methodology | Titanium alloy | Tool wear rate
Volume: 386-387
Pages: 223-229
ISSN/eISSN: 00431648/
|
Citations: 46
Article #:
Source ID: 22156
Funding:
|
| 1012 |
Title: Influence of technological innovation on performance of small manufacturing companies
Authors: Singh D.
Journal: International Journal of Productivity and Performance Management
DOI: 10.1108/IJPPM-02-2016-0035
Published: 2017
|
Type: Article
Keywords: Innovation | Manufacturing firm performance (MFP) | MSMEs | Technological innovation influencers (TIIs)
Volume: 66
Pages: 838-856
ISSN/eISSN: 17410401/
|
Citations: 31
Article #:
Source ID: 145293
Funding:
|
| 1013 |
Title: Productivity correlation and economic analysis of floating wick basin type vertical multiple effect diffusion solar still with waste heat recovery
Authors: Kaushal A.
Journal: Desalination
DOI: 10.1016/j.desal.2017.09.016
Published: 2017
|
Type: Article
Keywords: Capital recovery factor | Correlation | Life cycle costing | Solar distillation | Vertical multiple effect
Volume: 423
Pages: 95-103
ISSN/eISSN: 00119164/
|
Citations: 27
Article #:
Source ID: 16322
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 1014 |
Title: Productivity correlation and economic analysis of floating wick basin type vertical multiple effect diffusion solar still with waste heat recovery
Authors: Kaushal A.
Journal: Desalination
DOI: 10.1016/j.desal.2017.09.016
Published: 2017
|
Type: Article
Keywords: Capital recovery factor | Correlation | Life cycle costing | Solar distillation | Vertical multiple effect
Volume: 423
Pages: 95-103
ISSN/eISSN: 00119164/
|
Citations: 27
Article #:
Source ID: 16322
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 1015 |
Title: Real-time swing-up and stabilization control of a cart-pendulum system with constrained cart movement
Authors: Singla A.
Journal: International Journal of Nonlinear Sciences and Numerical Simulation
DOI: 10.1515/ijnsns-2017-0040
Published: 2017
|
Type: Article
Keywords: Actuator dynamics | Cart-pendulum system | Energy controller | LQR controller | Pole placement controller | Robustness | Stabilization
Volume: 18
Pages: 525-539
ISSN/eISSN: 15651339/
|
Citations: 23
Article #:
Source ID: 23247
Funding:
|
| 1016 |
Title: Creep Analysis in Functionally Graded Rotating Disc Using Tresca Criterion and Comparison with Von-Mises Criterion
Authors: Khanna K.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2017.02.094
Published: 2017
|
Type: Conference Paper
Keywords: Creep | Functionally Graded Material | Rotating disc | Tresca criterion | Von-Mises criterion
Volume: 4
Pages: 2431-2438
ISSN/eISSN: /22147853
|
Citations: 21
Article #:
Source ID: 21100370037
Funding:
|
| 1017 |
Title: On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders
Authors: Kaur B.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2016.09.080
Published: 1 January 2017
|
Type: Article
Keywords: Dense-phase | Fine powders | Pneumatic conveying | Scale-up validation | Solids friction
Volume: 305
Pages: 270-278
ISSN/eISSN: 00325910/1873328X
|
Citations: 14
Article #:
Source ID: 13717
Funding:
|
| 1018 |
Title: Erosion wear in a slurry pipe with multisized coal and bottom-ash slurries
Authors: Singh G.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2017.02.248
Published: 2017
|
Type: Conference Paper
Keywords: Bottom ash | coal | Erosion wear | Rotational speed etc | Slurry | Steel
Volume: 4
Pages: 3565-3571
ISSN/eISSN: /22147853
|
Citations: 9
Article #:
Source ID: 21100370037
Funding:
|
| 1019 |
Title: Effect of cold vapour treatment on geometric accuracy of fused deposition modelling parts
Authors: Garg A.
Journal: Rapid Prototyping Journal
DOI: 10.1108/RPJ-05-2016-0072
Published: 2017
|
Type: Article
Keywords: Cold vapour treatment | Fused deposition modelling | Geometric accuracy | Orientation | Surface finish
Volume: 23
Pages: 1226-1236
ISSN/eISSN: 13552546/
|
Citations: 8
Article #:
Source ID: 21691
Funding:
|
| 1020 |
Title: Structural equation modelling of technology innovation model using AMOS for Indian MSMEs
Authors: Singh D.
Journal: International Journal of Productivity and Quality Management
DOI: 10.1504/IJPQM.2017.083283
Published: 2017
|
Type: Article
Keywords: AMOS | Analysis of moment structures | CFA | Confirmatory factor analysis | Manufacturing performance | SEM | Structural equation modelling | Technology innovation initiatives | TII
Volume: 21
Pages: 72-96
ISSN/eISSN: 17466474/17466482
|
Citations: 7
Article #:
Source ID: 5700165165
Funding:
|
| 1021 |
Title: Leaching characteristics of heavy metal in bottom ash from Indian thermal power plant
Authors: Kumar S.
Journal: Journal of Scientific and Industrial Research
DOI:
Published: 2017
|
Type: Article
Keywords: Ash Disposal | Bottom Ash | Leaching Characteristics | Thermal Power Plants | Trace Elements
Volume: 76
Pages: 255-258
ISSN/eISSN: 00224456/
|
Citations: 6
Article #:
Source ID: 23649
Funding:
|
| 1022 |
Title: Thermal modelling, simulation and experimental validation of heat accumulation in a framed glass cabin
Authors: Bera T.K.
Journal: Journal of Theoretical and Applied Mechanics Poland
DOI: 10.15632/jtam-pl.55.3.911
Published: 2017
|
Type: Article
Keywords: Bond graph modeling | Car cabin | Double layer glass window | Experimental thermal analysis
Volume: 55
Pages: 911-922
ISSN/eISSN: 14292955/
|
Citations: 2
Article #:
Source ID: 19700176043
Funding:
|
| 1023 |
Title: Modeling of Bubbling Fluidized Bed Combustor Based on Biomass &co-firing
Authors: Gaba M.
Journal: Materials Today Proceedings
DOI: 10.1016/j.matpr.2017.01.185
Published: 2017
|
Type: Conference Paper
Keywords: Co-firing | Coal | Fluidized bed combustion | Modeling | Rice husk
Volume: 4
Pages: 1615-1625
ISSN/eISSN: /22147853
|
Citations: 1
Article #:
Source ID: 21100370037
Funding:
|
| 1024 |
Title: Circumferential temperature analysis of one sided thermally insulated parabolic trough receiver using computational fluid dynamics
Authors: Chandra Y.P.
Journal: Advances in Intelligent Systems and Computing
DOI: 10.1007/978-981-10-3325-4_12
Published: 2017
|
Type: Conference Paper
Keywords: Air filled annulus receiver | Computational fluid dynamics | Parabolic trough collectors
Volume: 547
Pages: 119-130
ISSN/eISSN: 21945357/
|
Citations: 0
Article #:
Source ID: 5100152904
Funding:
|
| 1025 |
Title: Novel microwave composite casting process: Theory, feasibility and characterization
Authors: Singh S.
Journal: Materials and Design
DOI: 10.1016/j.matdes.2016.08.071
Published: 5 December 2016
|
Type: Article
Keywords: Castings | Cleaner production | Composites | Melting | Microstructure | Microwave hybrid heating
Volume: 111
Pages: 51-59
ISSN/eISSN: 02641275/18734197
|
Citations: 64
Article #:
Source ID: 17797
Funding:
|
| 1026 |
Title: Vehicular traffic noise prediction using soft computing approach
Authors: Singh D.
Journal: Journal of Environmental Management
DOI: 10.1016/j.jenvman.2016.08.053
Published: 1 December 2016
|
Type: Article
Keywords: Modelling | Soft computing methods | Vehicular traffic noise
Volume: 183
Pages: 59-66
ISSN/eISSN: 03014797/10958630
|
Citations: 56
Article #:
Source ID: 23371
Funding:
|
| 1027 |
Title: Performance and exhaust emission characteristics of variable compression ratio diesel engine fuelled with esters of crude rice bran oil
Authors: Vasudeva M.
Journal: Springerplus
DOI: 10.1186/s40064-016-1945-7
Published: 1 December 2016
|
Type: Article
Keywords: Crude rice bran biodiesel | Cylinder pressure | Engine performance | Exhaust emissions | Variable compression ratio
Volume: 5
Pages:
ISSN/eISSN: /21931801
|
Citations: 34
Article #: 293
Source ID: 21100228569
Funding:
|
| 1028 |
Title: Experimental investigation into transient pressure pulses during pneumatic conveying of fine powders using Shannon entropy
Authors: Goel A.
Journal: Particuology
DOI: 10.1016/j.partic.2016.03.003
Published: 1 December 2016
|
Type: Article
Keywords: Flow pattern | Fluidized dense phase | Shannon entropy | Solid loading ratio | Superficial air velocity | Transient pressure fluctuations
Volume: 29
Pages: 143-153
ISSN/eISSN: 16742001/
|
Citations: 9
Article #:
Source ID: 10900153324
Funding: Department of Science and Technology, Government of Kerala
|
| 1029 |
Title: Controlled Phase Transformation Simulations to Design Microstructure for Tailored Mechanical Properties in Steel
Authors: Singh S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2016.1198026
Published: 17 November 2016
|
Type: Article
Keywords: Annealing simulator | Controlled cooling | Dual-phase | Inter-critical annealing | Multiphase
Volume: 31
Pages: 2064-2075
ISSN/eISSN: 10426914/15322475
|
Citations: 9
Article #:
Source ID: 21054
Funding:
|
| 1030 |
Title: Development and experimental study of an improved basin type vertical single distillation cell solar still
Authors: Kaushal A.K.
Journal: Desalination
DOI: 10.1016/j.desal.2016.07.017
Published: 15 November 2016
|
Type: Article
Keywords: Basin type | Cumulative efficiency | Diffusion | Vertical single distillation cell | Wick
Volume: 398
Pages: 121-132
ISSN/eISSN: 00119164/
|
Citations: 24
Article #:
Source ID: 16322
Funding:
|
| 1031 |
Title: Effect of ferrite-martensite interface morphology on bake hardening response of DP590 steel
Authors: Chakraborty A.
Journal: Materials Science and Engineering A
DOI: 10.1016/j.msea.2016.09.018
Published: 31 October 2016
|
Type: Article
Keywords: Bake-hardening | Dual phase steel | Ferrite/martensite interface | Martensite | Pre-strain
Volume: 676
Pages: 463-473
ISSN/eISSN: 09215093/
|
Citations: 22
Article #:
Source ID: 17811
Funding:
|
| 1032 |
Title: An assessment of the physical, mineral, and rheological properties of fly ash for stowing in coal mines
Authors: Kumar S.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2015.1122685
Published: 17 October 2016
|
Type: Article
Keywords: Ash disposal | ash utilization | critical velocity, etc | fly ash | mineral characterization | rheology | thermal power plant
Volume: 38
Pages: 2955-2962
ISSN/eISSN: 15567036/15567230
|
Citations: 12
Article #:
Source ID: 4500151514
Funding:
|
| 1033 |
Title: A simulation study of pearlite-to-austenite transformation kinetics in rapidly heated hot-rolled low carbon steel
Authors: Sharma S.
Journal: Materials and Design
DOI: 10.1016/j.matdes.2016.06.025
Published: 5 October 2016
|
Type: Article
Keywords: Continuous annealing | DICTRA | Dual-phase | Kinetics | Rapid heating | Simulation
Volume: 107
Pages: 65-73
ISSN/eISSN: 02641275/18734197
|
Citations: 14
Article #:
Source ID: 17797
Funding:
|
| 1034 |
Title: Power generation using cotton stalk-derived producer gas in diesel engines
Authors: Malik A.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2015.1111957
Published: 1 October 2016
|
Type: Article
Keywords: Biomass | biomass gasification | diesel engine | dual fuel operation | gasifier
Volume: 38
Pages: 2816-2822
ISSN/eISSN: 15567036/15567230
|
Citations: 12
Article #:
Source ID: 4500151514
Funding:
|
| 1035 |
Title: Environmental impact assessment of ash disposal system of a thermal power plant
Authors: Singh G.
Journal: International Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2016.03.171
Published: 21 September 2016
|
Type: Article
Keywords: Ash disposal | Fly ash | Leaching characteristics | Rheology | Thermal power plants | Trace elements
Volume: 41
Pages: 15887-15891
ISSN/eISSN: 03603199/
|
Citations: 23
Article #:
Source ID: 26991
Funding:
|
| 1036 |
Title: Comprehensive characterization of Indian bottom ash: Assessment of its potential utilization
Authors: Kumar S.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2015.1110644
Published: 16 September 2016
|
Type: Article
Keywords: Ash disposal | bottom ash | leaching characteristics | mineral characterization | waste material
Volume: 38
Pages: 2704-2710
ISSN/eISSN: 15567036/15567230
|
Citations: 3
Article #:
Source ID: 4500151514
Funding:
|
| 1037 |
Title: Optimization of process parameters for drilled hole quality characteristics during cortical bone drilling using Taguchi method
Authors: Singh G.
Journal: Journal of the Mechanical Behavior of Biomedical Materials
DOI: 10.1016/j.jmbbm.2016.05.015
Published: 1 September 2016
|
Type: Article
Keywords: Bone | Bone drilling tool | Bone fracture | Material removal rate (MRR) | Scanning Electrode Microscopy (SEM) | Surface roughness (SR)
Volume: 62
Pages: 355-365
ISSN/eISSN: 17516161/18780180
|
Citations: 77
Article #:
Source ID: 8000153139
Funding:
|
| 1038 |
Title: Effect of surface treatment of nanoclay on the mechanical properties of epoxy/glass fiber/clay nanocomposites
Authors: Sharma B.
Journal: Composite Interfaces
DOI: 10.1080/09276440.2016.1165522
Published: 1 September 2016
|
Type: Article
Keywords: epoxy matrix composites | Glass fibers | mechanical properties | OMMT | silane treatment
Volume: 23
Pages: 623-640
ISSN/eISSN: 09276440/15685543
|
Citations: 23
Article #:
Source ID: 27454
Funding:
|
| 1039 |
Title: A thermal cycling route for processing nano-grains in AISI 316L stainless steel for improved tensile deformation behaviour
Authors: Nanda T.
Journal: Defence Science Journal
DOI: 10.14429/dsj.66.9948
Published: September-October 2016
|
Type: Article
Keywords: Cold deformation | Dislocation-density | Recrystallisation | Stainless steel | Strained-induced-martensite | Thermal cycling
Volume: 66
Pages: 529-535
ISSN/eISSN: 0011748X/0976464X
|
Citations: 16
Article #:
Source ID: 17294
Funding:
|
| 1040 |
Title: Modelling and Analysis of Urban Traffic Noise System Using Algebraic Graph Theoretic Approach
Authors: Singh D.
Journal: Acoustics Australia
DOI: 10.1007/s40857-016-0058-3
Published: 1 August 2016
|
Type: Article
Keywords: Graph theory | Modelling | Permanent function | Urban traffic noise
Volume: 44
Pages: 249-261
ISSN/eISSN: 08146039/
|
Citations: 14
Article #:
Source ID: 60455
Funding:
|
| 1041 |
Title: Effect of process parameters on toughness and metallurgical behaviour during uniaxial automatic gas metal arc welding of austenitic stainless steel AISI 316
Authors: Bhattacharya A.
Journal: Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
DOI: 10.1177/1464420715586823
Published: August 2016
|
Type: Article
Keywords: Austenitic stainless steel | Automatic welding | GMAW | Microstructure | Process parameters | Toughness
Volume: 230
Pages: 869-878
ISSN/eISSN: 14644207/20413076
|
Citations: 4
Article #:
Source ID: 20971
Funding:
|
| 1042 |
Title: Magnetorheological methods for nanofinishing – a review
Authors: Bedi T.S.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2015.1081657
Published: 1 July 2016
|
Type: Article
Keywords: 3D surfaces | abrasives | advanced | fluid | magnetorheological | methods | nanofinishing | particles | roughness
Volume: 34
Pages: 412-422
ISSN/eISSN: 02726351/15480046
|
Citations: 81
Article #:
Source ID: 13661
Funding:
|
| 1043 |
Title: Non-linear Creep Analysis of Ceramic Specimen Using Finite Element Method
Authors: Saini J.
Journal: Journal of the Institution of Engineers India Series C
DOI: 10.1007/s40032-016-0219-z
Published: 1 July 2016
|
Type: Article
Keywords: Ceramics | Creep | Finite Element Method (FEM) | Non-linear analysis
Volume: 97
Pages: 417-430
ISSN/eISSN: 22500545/22500553
|
Citations: 2
Article #:
Source ID: 21100831410
Funding:
|
| 1044 |
Title: Algorithms for Accurate and Fast Plotting of Contour Surfaces in 3D Using Hexahedral Elements
Authors: Singh C.
Journal: Journal of the Institution of Engineers India Series C
DOI: 10.1007/s40032-016-0233-1
Published: 1 July 2016
|
Type: Article
Keywords: Contour lines | Contour surfaces | Finite element analysis | Hexahedral elements | Isosurfaces
Volume: 97
Pages: 389-405
ISSN/eISSN: 22500545/22500553
|
Citations: 2
Article #:
Source ID: 21100831410
Funding: University Grants Commission
|
| 1045 |
Title: An Energy Efficient Processing Route for Advance Ceramic Composites Using Microwaves
Authors: Singh S.
Journal: Advanced Ceramics
DOI: 10.1002/9781119242598.ch3
Published: 30 June 2016
|
Type: Book Chapter
Keywords: Casting | Cermets | Cladding | Composites | Defects | Heating | Joining | Microhardness | Microstructure | Microwaves
Volume:
Pages: 97-143
ISSN/eISSN: /
|
Citations: 3
Article #:
Source ID: 21100814031
Funding:
|
| 1046 |
Title: Effect of Isothermal Annealing on Microstructural Morphology of Martensite in a Super-Martensitic Stainless Steel Subjected to Different Prior Conditions
Authors: Nanda T.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2014.965830
Published: 10 June 2016
|
Type: Article
Keywords: Annealing | Intercritical | Martensite | Morphology | Phase-maps | Pole-maps | Thermomechanical
Volume: 31
Pages: 995-1003
ISSN/eISSN: 10426914/15322475
|
Citations: 2
Article #:
Source ID: 21054
Funding:
|
| 1047 |
Title: Experimental investigations on flow induced vibration of an externally excited flexible plate
Authors: Purohit A.
Journal: Journal of Sound and Vibration
DOI: 10.1016/j.jsv.2016.02.039
Published: 9 June 2016
|
Type: Article
Keywords: External excitation | Flexible structure | Flow-induced vibration | Splitter plate | Wind tunnel experiments
Volume: 371
Pages: 237-251
ISSN/eISSN: 0022460X/10958568
|
Citations: 15
Article #:
Source ID: 13030
Funding: Ministry of Human Resource Development
|
| 1048 |
Title: Modeling solids friction factor for fluidized dense-phase pneumatic transport of powders using two layer flow theory
Authors: Setia G.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2016.02.006
Published: June 01, 2016
|
Type: Article
Keywords: Fluidized dense-phase | Pneumatic conveying | Scale-up validation | Solids friction factor | Two-layer model
Volume: 294
Pages: 80-92
ISSN/eISSN: 00325910/1873328X
|
Citations: 34
Article #:
Source ID: 13717
Funding: Council of Scientific and Industrial Research, India
|
| 1049 |
Title: An inverse trigonometric shear deformation theory for supersonic flutter characteristics of multilayered composite plates
Authors: Grover N.
Journal: Aerospace Science and Technology
DOI: 10.1016/j.ast.2016.02.017
Published: May 2016
|
Type: Article
Keywords: Finite element analysis | Flutter | Laminated composite | Linear piston theory | Shear deformation theory
Volume: 52
Pages: 41-51
ISSN/eISSN: 12709638/
|
Citations: 55
Article #:
Source ID: 12507
Funding:
|
| 1050 |
Title: Non-contact damage monitoring technique for FRP laminates using guided waves
Authors: Garg M.
Journal: Smart Structures and Systems
DOI: 10.12989/sss.2016.17.5.795
Published: May 2016
|
Type: Article
Keywords: Damage localizations | Defects | Fiber reinforced polymer composites | Guided waves | Lamb waves | Structural health monitoring | VARIM
Volume: 17
Pages: 795-817
ISSN/eISSN: 17381584/17381991
|
Citations: 8
Article #:
Source ID: 5300152722
Funding: Naval Research Board
|
| 1051 |
Title: High hardness-high toughness WC-20Co nanocomposites: Effect of VC variation and sintering temperature
Authors: Kumar D.
Journal: Materials Science and Engineering A
DOI: 10.1016/j.msea.2016.03.114
Published: April 29, 2016
|
Type: Article
Keywords: High hardness | High toughness | Liquid phase sintering | Tungsten carbide | Two layered interface
Volume: 663
Pages: 21-28
ISSN/eISSN: 09215093/
|
Citations: 20
Article #:
Source ID: 17811
Funding:
|
| 1052 |
Title: Recent applications of microwaves in materials joining and surface coatings
Authors: Singh S.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/0954405414560778
Published: April 2016
|
Type: Review
Keywords: Advanced manufacturing | Cladding | Coating | Joining | Microwave material processing | Microwaves | Surface engineering
Volume: 230
Pages: 603-617
ISSN/eISSN: 09544054/20412975
|
Citations: 61
Article #:
Source ID: 20406
Funding:
|
| 1053 |
Title: Performance evaluation of nanofluid (Al2O3/H2O-C2H6O2) based parabolic solar collector using both experimental and CFD techniques
Authors: Ajay K.
Journal: International Journal of Engineering Transactions A Basics
DOI: 10.5829/idosi.ije.2016.29.04a.17
Published: April 2016
|
Type: Article
Keywords: CFD | Nanofluid | Parabolic Solar Collector | Solar Energy | Thermal Efficiency
Volume: 29
Pages: 572-580
ISSN/eISSN: 17281431/
|
Citations: 11
Article #:
Source ID: 32210
Funding:
|
| 1054 |
Title: Performance evaluation of nanofluid (Al2O3/H2O-C2H6O2) based parabolic solar collector using both experimental and CFD techniques
Authors: Ajay K.
Journal: International Journal of Engineering Transactions A Basics
DOI: 10.5829/idosi.ije.2016.29.04a.17
Published: April 2016
|
Type: Article
Keywords: CFD | Nanofluid | Parabolic solar collector | Solar energy | Thermal efficiency
Volume: 29
Pages: 511-519
ISSN/eISSN: 17281431/
|
Citations: 2
Article #:
Source ID: 32210
Funding:
|
| 1055 |
Title: On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment
Authors: Garg A.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2015.1070425
Published: 11 March 2016
|
Type: Article
Keywords: Accuracy | Cold-vapors | Deposition;Finish | Fused | Geometric | Orientation
Volume: 31
Pages: 522-529
ISSN/eISSN: 10426914/15322475
|
Citations: 177
Article #:
Source ID: 21054
Funding:
|
| 1056 |
Title: Metal Matrix Composites for Thermal Management: A Review
Authors: Sidhu S.S.
Journal: Critical Reviews in Solid State and Materials Sciences
DOI: 10.1080/10408436.2015.1076717
Published: 3 March 2016
|
Type: Article
Keywords: CTE | Metal matrix composites | Modeling | Thermal conductivity
Volume: 41
Pages: 132-157
ISSN/eISSN: 10408436/15476561
|
Citations: 109
Article #:
Source ID: 27476
Funding:
|
| 1057 |
Title: Leaching characteristics of bottom ash from thermal power plants
Authors: Kumar S.
Journal: Energy Sources Part A Recovery Utilization and Environmental Effects
DOI: 10.1080/15567036.2015.1010051
Published: 3 March 2016
|
Type: Article
Keywords: Ash disposal | bottom ash | leaching characteristics | thermal power plants | trace elements
Volume: 38
Pages: 686-694
ISSN/eISSN: 15567036/15567230
|
Citations: 9
Article #:
Source ID: 4500151514
Funding:
|
| 1058 |
Title: Investigation on failure modes for pin joints made from unidirectional glass-epoxy nanoclay laminates
Authors: Singh M.
Journal: Fatigue and Fracture of Engineering Materials and Structures
DOI: 10.1111/ffe.12358
Published: 1 March 2016
|
Type: Article
Keywords: characteristic curve | failure analysis | glass reinforced | nanoclay | pin joint | progressive damage failure
Volume: 39
Pages: 320-334
ISSN/eISSN: 8756758X/14602695
|
Citations: 21
Article #:
Source ID: 29222
Funding:
|
| 1059 |
Title: Study of particle size distribution and oxygen mass balance in a bubbling fluidizing combustor using cotton stalk
Authors: Sharma R.K.
Journal: Asia Pacific Journal of Chemical Engineering
DOI: 10.1002/apj.1955
Published: 1 March 2016
|
Type: Article
Keywords: biomass | fluidized bed | oxygen conversion | oxygen mass balance | solid population balance
Volume: 11
Pages: 187-199
ISSN/eISSN: 19322135/19322143
|
Citations: 1
Article #:
Source ID: 5400152634
Funding:
|
| 1060 |
Title: Numerical modelling of moisture diffusion in FRP with clustered microstructures
Authors: Jain D.
Journal: Applied Mathematical Modelling
DOI: 10.1016/j.apm.2015.09.021
Published: 1 February 2016
|
Type: Article
Keywords: Clustering | Computational modelling | Microstructures | Moisture diffusion | Polymer-matrix composites | Statistical properties/methods
Volume: 40
Pages: 1873-1886
ISSN/eISSN: 0307904X/
|
Citations: 16
Article #:
Source ID: 28065
Funding:
|
| 1061 |
Title: The edge–torus tangency problem in multipoint machining of triangulated surface models
Authors: Duvedi R.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-015-7532-1
Published: 1 February 2016
|
Type: Article
Keywords: Cutter location | Edge–torus tangency | NC machining | Radiused end milling cutter | Tool positioning
Volume: 82
Pages: 1959-1972
ISSN/eISSN: 02683768/14333015
|
Citations: 9
Article #:
Source ID: 20428
Funding:
|
| 1062 |
Title: An investigation into the transition of flow mechanism during fluidized dense-phase pneumatic conveying of fine powders
Authors: Mittal A.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2015.1038672
Published: 2 January 2016
|
Type: Article
Keywords: Fluidized dense-phase | Hilbert-Huang transformation | pneumatic conveying | powerspectral density | pressure fluctuations | wavelet transformation
Volume: 34
Pages: 23-32
ISSN/eISSN: 02726351/15480046
|
Citations: 10
Article #:
Source ID: 13661
Funding:
|
| 1063 |
Title: A review of tool wear prediction during friction stir welding of aluminium matrix composite
Authors: BIST A.
Journal: Transactions of Nonferrous Metals Society of China English Edition
DOI: 10.1016/S1003-6326(16)64318-2
Published: 2016
|
Type: Article
Keywords: aluminium matrix composites | friction stir welding | tool wear
Volume: 26
Pages: 2003-2018
ISSN/eISSN: 10036326/
|
Citations: 62
Article #:
Source ID: 27854
Funding:
|
| 1064 |
Title: An investigation on thermal necrosis during bone drilling
Authors: Singh G.
Journal: International Journal of Machining and Machinability of Materials
DOI: 10.1504/IJMMM.2016.077708
Published: 2016
|
Type: Article
Keywords: Bone | Bone drilling | Orthopaedic surgery | Thermal necrosis | Thermocouple.
Volume: 18
Pages: 341-349
ISSN/eISSN: 17485711/1748572X
|
Citations: 15
Article #:
Source ID: 12400154711
Funding:
|
| 1065 |
Title: Combined experimental and CFD investigation of the parabolic shaped solar collector utilizing nanofluid (CuO-H2O and SiO2-H2O) as a working fluid
Authors: Ajay K.
Journal: Journal of Engineering United Kingdom
DOI: 10.1155/2016/5729576
Published: 2016
|
Type: Article
Keywords:
Volume: 2016
Pages:
ISSN/eISSN: 23144904/23144912
|
Citations: 13
Article #: 5729576
Source ID: 21100463939
Funding:
|
| 1066 |
Title: Bond graph aided thermal modelling of twin-tube shock absorber
Authors: Singh A.
Journal: International Journal of Modelling and Simulation
DOI: 10.1080/02286203.2016.1192980
Published: 2016
|
Type: Article
Keywords: Bond graph | Pressure development | Temperature | Twin-tube shock absorber | Volume flow rate
Volume: 36
Pages: 183-192
ISSN/eISSN: 02286203/19257082
|
Citations: 11
Article #:
Source ID: 21112
Funding:
|
| 1067 |
Title: Experimental and CFD investigation on the efficiency of parabolic solar collector involving al2o3/h2o (DI) nanofluid as a working fluid
Authors: Ajay K.
Journal: International Journal of Renewable Energy Research
DOI:
Published: 2016
|
Type: Article
Keywords: Al2O3 | CFD | Nanofluid | Parabolic solar collector | Solar energy | Thermal efficiency
Volume: 6
Pages: 392-401
ISSN/eISSN: /13090127
|
Citations: 9
Article #:
Source ID: 21100258747
Funding:
|
| 1068 |
Title: Study the effect of black layer on electrode wear ratio in powder mixed electric discharge machining of titanium alloys
Authors: Kumar S.
Journal: International Journal of Machining and Machinability of Materials
DOI: 10.1504/IJMMM.2016.075454
Published: 2016
|
Type: Article
Keywords: Additive model | Black layer | Carbon | Cryogenic-treatment | Electric discharge machining | Electrode | Electrode wear ratio | EWR | Taguchi method
Volume: 18
Pages: 18-35
ISSN/eISSN: 17485711/1748572X
|
Citations: 9
Article #:
Source ID: 12400154711
Funding:
|
| 1069 |
Title: Thermo-economic analysis of a biomass-fired bubbling fluidised bed thermal power plant
Authors: Sharma R.K.
Journal: International Journal of Exergy
DOI: 10.1504/IJEX.2016.078504
Published: 2016
|
Type: Article
Keywords: Biomass | Economic analysis | Exergy | Fluidised bed | Thermal power plant
Volume: 21
Pages: 1-20
ISSN/eISSN: 17428297/17428300
|
Citations: 6
Article #:
Source ID: 5800207378
Funding:
|
| 1070 |
Title: Command shaped closed loop control of flexible robotic manipulators
Authors: Singla A.
Journal: Journal of Vibration Engineering and Technologies
DOI:
Published: 2016
|
Type: Article
Keywords: Command shaping | Finite element method | Flexible links | State estimation | Vibration suppression
Volume: 4
Pages: 97-110
ISSN/eISSN: 25233920/25233939
|
Citations: 5
Article #:
Source ID: 21100364384
Funding:
|
| 1071 |
Title: Solar selective volumetric receivers for harnessing solar thermal energy
Authors: Khullar V.
Journal: ASME International Mechanical Engineering Congress and Exposition Proceedings Imece
DOI: 10.1115/IMECE2016-66599
Published: 2016
|
Type: Conference Paper
Keywords:
Volume: 6B-2016
Pages:
ISSN/eISSN: /
|
Citations: 4
Article #:
Source ID: 21100821134
Funding:
|
| 1072 |
Title: Predictive modeling of surface roughness in ultrasonic machining of cryogenic treated Ti-6Al-4V
Authors: Dhuria G.
Journal: Engineering Computations Swansea Wales
DOI: 10.1108/EC-11-2015-0360
Published: 2016
|
Type: Article
Keywords: Artificial neural network | Cryogenic treatment | Surface roughness | Ti-6Al-4V | Ultrasonic machining
Volume: 33
Pages: 2377-2394
ISSN/eISSN: 02644401/
|
Citations: 3
Article #:
Source ID: 18184
Funding:
|
| 1073 |
Title: Improved modelling of solids friction factor for fluidized dense-phase pneumatic transport of fine powders using two layer flow theory
Authors: Setia G.
Journal: Icbmh 2016 12th International Conference on Bulk Materials Storage Handling and Transportation Proceedings
DOI:
Published: 2016
|
Type: Conference Paper
Keywords:
Volume:
Pages: 403-408
ISSN/eISSN: /
|
Citations: 1
Article #:
Source ID: 21100805315
Funding:
|
| 1074 |
Title: Applicability of heat mirrors in reducing thermal losses in concentrating solar collectors
Authors: Mahendra P.
Journal: ASME International Mechanical Engineering Congress and Exposition Proceedings Imece
DOI: 10.1115/IMECE2016-66565
Published: 2016
|
Type: Conference Paper
Keywords:
Volume: 6B-2016
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21100821134
Funding:
|
| 1075 |
Title: Sensitivity analysis and optimal production scheduling as a dual phase simplex model
Authors: Dhand S.
Journal: Indian Journal of Science and Technology
DOI: 10.17485/ijst/2016/v9i39/100788
Published: 2016
|
Type: Article
Keywords: Production scheduling | Simplex method
Volume: 9
Pages:
ISSN/eISSN: 09746846/09745645
|
Citations: 0
Article #: 100788
Source ID: 21100201522
Funding:
|
| 1076 |
Title: Performance analysis of ball end magnetorheological finishing process with MR polishing fluid
Authors: Singh A.K.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2015.1019098
Published: 2 December 2015
|
Type: Article
Keywords: Abrasion | Abrasives | Finishing | Magnetorheological | Polishing | Roughness
Volume: 30
Pages: 1482-1489
ISSN/eISSN: 10426914/15322475
|
Citations: 53
Article #:
Source ID: 21054
Funding:
|
| 1077 |
Title: Analysis of residual stresses in particulate reinforced aluminium matrix composite after EDM
Authors: Sidhu S.S.
Journal: Materials Science and Technology United Kingdom
DOI: 10.1179/1743284715Y.0000000033
Published: December 2015
|
Type: Article
Keywords: Electric discharge machining | Metal matrix composites | Residual stress | X-ray diffraction
Volume: 31
Pages: 1850-1859
ISSN/eISSN: 02670836/17432847
|
Citations: 23
Article #:
Source ID: 17815
Funding:
|
| 1078 |
Title: Accurate and Fast Algorithm for the Plotting of Contours Using Eight Node Quadrilateral Meshes
Authors: Singh C.
Journal: Journal of the Institution of Engineers India Series B
DOI: 10.1007/s40031-014-0151-7
Published: 1 December 2015
|
Type: Article
Keywords: Contour plotting | Eight-node element | FEA | Quadratic interpolation
Volume: 96
Pages: 311-325
ISSN/eISSN: 22502106/22502114
|
Citations: 4
Article #:
Source ID: 21100831436
Funding:
|
| 1079 |
Title: Effect of Processing Methods and Die Design Parameters on Green Properties of WC-Co Nanopowder Pellets
Authors: Kumar D.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2015.1037903
Published: 2 November 2015
|
Type: Article
Keywords: Carbide | Die-design | Green-strength | Nanopowder | Tungsten
Volume: 30
Pages: 1329-1341
ISSN/eISSN: 10426914/15322475
|
Citations: 7
Article #:
Source ID: 21054
Funding:
|
| 1080 |
Title: Scallop height of 5-axis machining of large triangles with a flat end mill
Authors: Duvedi R.
Journal: Computer Aided Design and Applications
DOI: 10.1080/16864360.2015.1033334
Published: 2 November 2015
|
Type: Article
Keywords: 5-axis machining | CNC machining | Scallop height
Volume: 12
Pages: 710-716
ISSN/eISSN: 16864360/
|
Citations: 5
Article #:
Source ID: 4700151607
Funding:
|
| 1081 |
Title: Effect of ply orientation on strength and failure mode of pin jointed unidirectional glass-epoxy nanoclay laminates
Authors: Singh M.
Journal: Defence Science Journal
DOI: 10.14429/dsj.65.8917
Published: November 2015
|
Type: Article
Keywords: Finite element methods | Nanoclay | Pin joint | Ply orientations | Polymer nano composites
Volume: 65
Pages: 489-499
ISSN/eISSN: 0011748X/0976464X
|
Citations: 13
Article #:
Source ID: 17294
Funding:
|
| 1082 |
Title: Three-dimensional CFD modelling of a fluidised bed combustor fuelled by biomass and coal
Authors: Kumar H.
Journal: Materials Research Innovations
DOI: 10.1179/1432891715Z.0000000001636
Published: November 2015
|
Type: Article
Keywords: Biomass | CFD | Combustion | Discrete phase model | Fluidised bed
Volume: 19
Pages: 118-124
ISSN/eISSN: 14328917/1433075X
|
Citations: 3
Article #:
Source ID: 20536
Funding:
|
| 1083 |
Title: Extension of D-H parameter method to hybrid manipulators used in robot-assisted surgery
Authors: Singh A.
Journal: Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
DOI: 10.1177/0954411915602289
Published: 29 October 2015
|
Type: Article
Keywords: D-H parameter method | dummy frames | Hybrid manipulator | robot-assisted surgery | spatial links
Volume: 229
Pages: 703-712
ISSN/eISSN: 09544119/20413033
|
Citations: 33
Article #:
Source ID: 16334
Funding:
|
| 1084 |
Title: Development and analysis of tribological behavior of microwave processed EWAC + 20% WC10Co2Ni composite cladding on mild steel substrate
Authors: Pathania A.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2015.09.007
Published: October 2015
|
Type: Article
Keywords: Characterization | Composite cladding | Hybrid heating | Microhardness | Microwave processing | Sliding wear
Volume: 20
Pages: 79-87
ISSN/eISSN: 15266125/
|
Citations: 58
Article #:
Source ID: 27677
Funding:
|
| 1085 |
Title: Influence of current and shielding gas in TiO2 flux activated tig welding on different graded steels
Authors: Tathgir S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2014.973591
Published: 2 September 2015
|
Type: Article
Keywords: Activated flux | Arc-column | Current | Gas | Microstructure | Penetration | Shielding | Steels | TIG
Volume: 30
Pages: 1115-1123
ISSN/eISSN: 10426914/15322475
|
Citations: 51
Article #:
Source ID: 21054
Funding:
|
| 1086 |
Title: Mechanical and metallurgical studies in double shielded GMAW of dissimilar stainless steels
Authors: Kumar R.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2014.994760
Published: 2 September 2015
|
Type: Article
Keywords: Dissimilar | Doublelayer;GMAW | Microhardness | Microstructure | Shielding | Stainless | Steel | Tensile
Volume: 30
Pages: 1146-1153
ISSN/eISSN: 10426914/15322475
|
Citations: 22
Article #:
Source ID: 21054
Funding:
|
| 1087 |
Title: Vibration suppression during input tracking of a flexible manipulator using a hybrid controller
Authors: Singla A.
Journal: Sadhana Academy Proceedings in Engineering Sciences
DOI: 10.1007/s12046-015-0392-4
Published: 1 September 2015
|
Type: Article
Keywords: Command shaping | finite element method | flexible links | state estimation | vibration suppression
Volume: 40
Pages: 1865-1898
ISSN/eISSN: 02562499/09737677
|
Citations: 3
Article #:
Source ID: 23531
Funding:
|
| 1088 |
Title: Ultrasonic guided waves for monitoring corrosion of FRP wrapped concrete structures
Authors: Sharma A.
Journal: Construction and Building Materials
DOI: 10.1016/j.conbuildmat.2015.08.084
Published: 24 August 2015
|
Type: Article
Keywords: Cell voltage | Corrosion protection | Fibre reinforced polymers | Mass loss | Pulse echo | Reinforced concrete | Ultrasonic guided waves
Volume: 96
Pages: 690-702
ISSN/eISSN: 09500618/
|
Citations: 34
Article #:
Source ID: 24443
Funding:
|
| 1089 |
Title: On cutter deflection profile errors in end milling: Modeling and experimental validation
Authors: Bhattacharya A.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2014.973598
Published: 3 August 2015
|
Type: Article
Keywords: Axial | Deflection | End-milling | Experiment | Modeling | Profile | Radial | Tangential
Volume: 30
Pages: 1042-1059
ISSN/eISSN: 10426914/15322475
|
Citations: 6
Article #:
Source ID: 21054
Funding:
|
| 1090 |
Title: Energy loss at bends in the pneumatic conveying of fly ash
Authors: Tripathi N.
Journal: Particuology
DOI: 10.1016/j.partic.2014.09.003
Published: 1 August 2015
|
Type: Article
Keywords: Bend | Bend model | Fluidised dense phase | Pneumatic conveying | Pressure drop
Volume: 21
Pages: 65-73
ISSN/eISSN: 16742001/22104291
|
Citations: 35
Article #:
Source ID: 10900153324
Funding: Department of Science and Technology, Government of Kerala
|
| 1091 |
Title: Mechanical and wear properties of hybrid epoxy nanocomposites
Authors: Thind K.S.
Journal: Indian Journal of Engineering and Materials Sciences
DOI:
Published: 1 August 2015
|
Type: Article
Keywords: Epoxy | Mechanical properties | Nano clay | Nano TiO2 | Nanocomposites | Specific wear rate
Volume: 22
Pages: 421-428
ISSN/eISSN: 09714588/09751017
|
Citations: 9
Article #:
Source ID: 29812
Funding:
|
| 1092 |
Title: Mechanical and wear properties of SiC/Graphite reinforced Al359 alloy-based metal matrix composite
Authors: Bansal S.
Journal: Defence Science Journal
DOI: 10.14429/dsj.65.8676
Published: 1 July 2015
|
Type: Article
Keywords: Hardness | Metal matrix composite | Scanning electron microscopy | Tensile strength | Wear
Volume: 65
Pages: 330-338
ISSN/eISSN: 0011748X/0976464X
|
Citations: 48
Article #:
Source ID: 17294
Funding:
|
| 1093 |
Title: Effect of fibre topology on hygro-mechanical response of polymer matrix composites
Authors: Jain D.
Journal: International Journal of Heat and Mass Transfer
DOI: 10.1016/j.ijheatmasstransfer.2015.03.054
Published: 1 July 2015
|
Type: Article
Keywords: Fibre reinforced polymers | Fibre topology | Moisture diffusion | Moisture induced stresses | Topology design
Volume: 86
Pages: 787-795
ISSN/eISSN: 00179310/
|
Citations: 15
Article #:
Source ID: 20448
Funding:
|
| 1094 |
Title: A non-contact technique for damage monitoring in submerged plates using guided waves
Authors: Sharma S.
Journal: Journal of Testing and Evaluation
DOI: 10.1520/JTE20120357
Published: 1 July 2015
|
Type: Article
Keywords: Corrosion | Defect maps | Dispersion | Guided waves | Mode sensitivity | Notches | Submerged plates | Ultrasonics
Volume: 43
Pages: 776-791
ISSN/eISSN: 00903973/
|
Citations: 12
Article #:
Source ID: 21205
Funding:
|
| 1095 |
Title: Study of a 30 MW bubbling fluidized bed combustor based on co-firing biomass and coal
Authors: Kumar H.
Journal: Sadhana Academy Proceedings in Engineering Sciences
DOI: 10.1007/s12046-015-0361-y
Published: 1 July 2015
|
Type: Article
Keywords: biomass | CFD | combustion | fluidized bed
Volume: 40
Pages: 1283-1299
ISSN/eISSN: 02562499/09737677
|
Citations: 11
Article #:
Source ID: 23531
Funding:
|
| 1096 |
Title: Numeric implementation of drop and tilt method of 5-axis tool positioning for machining of triangulated surfaces
Authors: Duvedi R.K.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-014-6636-3
Published: 18 June 2015
|
Type: Article
Keywords: 5-axis machining | CNC Machining | Multi-point machining | STL
Volume: 78
Pages: 1677-1690
ISSN/eISSN: 02683768/14333015
|
Citations: 14
Article #:
Source ID: 20428
Funding:
|
| 1097 |
Title: Modeling minimum transport boundary for fluidized dense-phase pneumatic conveying systems
Authors: Setia G.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2015.02.050
Published: June 01, 2015
|
Type: Article
Keywords: Blockage boundary | Fluidized dense-phase | Minimum conveying velocity | Pneumatic conveying | Scale-up
Volume: 277
Pages: 244-251
ISSN/eISSN: 00325910/1873328X
|
Citations: 23
Article #:
Source ID: 13717
Funding: Ministerio de Ciencia y Tecnología
|
| 1098 |
Title: An investigation into pressure fluctuations for fluidized dense-phase pneumatic transport of fine powders
Authors: Mittal A.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2015.02.052
Published: June 01, 2015
|
Type: Article
Keywords: Fluidized dense-phase | Hurst exponent | Phase space diagram | Pneumatic conveying | Pressure fluctuations | Shannon entropy
Volume: 277
Pages: 163-170
ISSN/eISSN: 00325910/1873328X
|
Citations: 16
Article #:
Source ID: 13717
Funding: Ministerio de Ciencia y Tecnología
|
| 1099 |
Title: Phase-dependent thermophysical properties of α-and γ-Al2O3 in aqueous suspension
Authors: Pal B.
Journal: Journal of Industrial and Engineering Chemistry
DOI: 10.1016/j.jiec.2014.10.018
Published: 25 May 2015
|
Type: Article
Keywords: Alumina phase transition | Thermal conductivity | Viscosity of water-Al2O3 dispersion | Zeta potential of Al2O3 suspension
Volume: 25
Pages: 99-104
ISSN/eISSN: 1226086X/22345957
|
Citations: 6
Article #:
Source ID: 144861
Funding: University Grants Commission
|
| 1100 |
Title: Experimental investigation of magnetic field assisted powder mixed electric discharge machining
Authors: Bhatt G.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2014.968303
Published: 4 May 2015
|
Type: Conference Paper
Keywords: Electric discharge machining | magnetic field | material removal | microhardness | powder mixed dielectric | surface roughness | tool wear
Volume: 33
Pages: 246-256
ISSN/eISSN: 02726351/15480046
|
Citations: 36
Article #:
Source ID: 13661
Funding:
|
| 1101 |
Title: Shape dependent thermal conductivity of TiO2 -deionized water and ethylene glycol dispersion
Authors: Pal B.
Journal: Journal of Nanoscience and Nanotechnology
DOI: 10.1166/jnn.2015.9488
Published: 1 May 2015
|
Type: Article
Keywords: Dispersion stability | Nanoparticle shape | PH Effect | Thermal conductivity | Titania nanoparticles | Zeta potential
Volume: 15
Pages: 3670-3676
ISSN/eISSN: 15334880/15334899
|
Citations: 1
Article #:
Source ID: 28546
Funding:
|
| 1102 |
Title: CAE Analysis, Optimization and Fabrication of Formula SAE Vehicle Structure
Authors: Kakria S.
Journal: SAE Technical Papers
DOI: 10.4271/2015-01-0072
Published: 10 March 2015
|
Type: Conference Paper
Keywords: ADAMS | Chassis Stiffness | Computer Aided Engineering (CAE) | DOE | Fabrication | Finite Element Analysis (FEA) | FSAE Vehicle | HyperMesh | Multi Body Dynamics (MBD) | Optimization
Volume: 2015-March
Pages:
ISSN/eISSN: /01487191
|
Citations: 3
Article #:
Source ID: 21100239259
Funding:
|
| 1103 |
Title: Powder mixed dielectric: An approach for improved process performance in EDM
Authors: Batish A.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2014.947659
Published: 4 March 2015
|
Type: Article
Keywords: Material removal rate | overcut | powder mixed electric discharge machining | tool wear rate
Volume: 33
Pages: 150-158
ISSN/eISSN: 02726351/15480046
|
Citations: 38
Article #:
Source ID: 13661
Funding:
|
| 1104 |
Title: Comparative study for surface topography of bone drilling using conventional drilling and loose abrasive machining
Authors: Singh G.
Journal: Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
DOI: 10.1177/0954411915576945
Published: 4 March 2015
|
Type: Article
Keywords: Bone | bone properties | scanning electrode microscopy | surface roughness | thermal necrosis | ultrasonic drilling
Volume: 229
Pages: 225-231
ISSN/eISSN: 09544119/20413033
|
Citations: 35
Article #:
Source ID: 16334
Funding:
|
| 1105 |
Title: Creep analysis of a variable thickness rotating FGM disc using Tresca criterion
Authors: Khanna K.
Journal: Defence Science Journal
DOI: 10.14429/dsj.65.8045
Published: 1 March 2015
|
Type: Article
Keywords: Creep | Disc | Functionally graded materials | Particle gradient | Thickness gradient
Volume: 65
Pages: 163-170
ISSN/eISSN: 0011748X/0976464X
|
Citations: 18
Article #:
Source ID: 17294
Funding:
|
| 1106 |
Title: A mathematical model to predict material removal rate during electric discharge machining of cryogenically treated titanium alloys
Authors: Kumar S.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/0954405414527955
Published: 1 February 2015
|
Type: Article
Keywords: Buckingham’s π-theorem | cryogenic treatment | dimensional analysis | Electric discharge machining | material removal rate | optimization of parameters | Taguchi methodology | titanium alloys
Volume: 229
Pages: 214-228
ISSN/eISSN: 09544054/20412975
|
Citations: 30
Article #:
Source ID: 20406
Funding:
|
| 1107 |
Title: Microwave processing of materials and applications in manufacturing industries: A Review
Authors: Singh S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2014.952028
Published: 2 January 2015
|
Type: Review
Keywords: Cladding | Coatings | Composites | Joining | Manufacturing | Melting | Microwave | Processes | Surface
Volume: 30
Pages: 1-29
ISSN/eISSN: 10426914/15322475
|
Citations: 326
Article #:
Source ID: 21054
Funding:
|
| 1108 |
Title: An investigation into pressure fluctuations and improved modeling of solids friction for dense-phase pneumatic conveying of powders
Authors: Mittal A.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2014.949370
Published: 2 January 2015
|
Type: Conference Paper
Keywords: Dense-phase | Pneumatic conveying | Pressure fluctuation | Scale-up | Shannon entropy | Solids friction factor
Volume: 33
Pages: 67-75
ISSN/eISSN: 02726351/15480046
|
Citations: 4
Article #:
Source ID: 13661
Funding: Ministerio de Ciencia y Tecnología
|
| 1109 |
Title: Modelling fluidized dense-phase pneumatic conveying of fly ash
Authors: Setia G.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2014.09.033
Published: January 01, 2015
|
Type: Article
Keywords: Conveying characteristics | Fluidized dense-phase | Minimum transport boundary | Solid friction factor | Volumetric loading ratio
Volume: 270
Pages: 39-45
ISSN/eISSN: 00325910/1873328X
|
Citations: 21
Article #:
Source ID: 13717
Funding: Ministerio de Ciencia y Tecnología
|
| 1110 |
Title: A quantitative analysis of the relationship between drivers of innovativeness and performance of MSMEs
Authors: Gupta H.
Journal: International Journal of Technology Policy and Management
DOI: 10.1504/IJTPM.2015.069202
Published: 2015
|
Type: Article
Keywords: Entrepreneur | Government support | Innovation | Innovative performance | Linkage | MSMEs | Product performance | Sales performance
Volume: 15
Pages: 128-157
ISSN/eISSN: 14684322/17415292
|
Citations: 16
Article #:
Source ID: 12764
Funding:
|
| 1111 |
Title: Topological disorder of microstructure in fiber-reinforced polymer composites: Diffusion response
Authors: Jain D.
Journal: Journal of Reinforced Plastics and Composites
DOI: 10.1177/0731684414562224
Published: 13 January 2015
|
Type: Article
Keywords: Fiber polymer composites | Microstructures | Moisture transport | Structure-property relationship
Volume: 34
Pages: 49-59
ISSN/eISSN: 07316844/15307964
|
Citations: 8
Article #:
Source ID: 21185
Funding:
|
| 1112 |
Title: Study the surface characteristics of cryogenically treated tool- electrodes in powder mixed electric discharge machining process
Authors: Kumar S.
Journal: Materials Science Forum
DOI: 10.4028/www.scientific.net/MSF.808.19
Published: 2015
|
Type: Article
Keywords: Cryogenictreatment | Electric discharge machining | Electrode | Machining | Roughness | Surface | Taguchi method | Titanium alloys
Volume: 808
Pages: 19-33
ISSN/eISSN: 02555476/16629752
|
Citations: 6
Article #:
Source ID: 28700
Funding:
|
| 1113 |
Title: Improved scale-up procedure for fluidized dense-phase pneumatic conveying systems
Authors: Setia G.
Journal: Chops 2015 8th International Conference for Conveying and Handling of Particulate Solids
DOI:
Published: 2015
|
Type: Conference Paper
Keywords: Fluidized dense-phase | Minimum conveying velocity | Pneumatic conveying | Pressure drop | Scale-up | Solids friction factor
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 3
Article #:
Source ID: 21100456110
Funding:
|
| 1114 |
Title: Exploring the determinants of technology innovation in MSMEs
Authors: Singh D.
Journal: International Journal of Engineering Research in Africa
DOI: 10.4028/www.scientific.net/JERA.13.103
Published: 2015
|
Type: Article
Keywords: Collaboration | Manufacturing performance | Monetary management | MSMEs | Technology innovation
Volume: 13
Pages: 103-115
ISSN/eISSN: 16633571/16634144
|
Citations: 3
Article #:
Source ID: 21100216324
Funding:
|
| 1115 |
Title: Analysis of major problems faced by small firms in North India
Authors: Singh D.
Journal: International Journal of Engineering Research in Africa
DOI: 10.4028/www.scientific.net/JERA.15.150
Published: 2015
|
Type: Article
Keywords: Development | Growth | Performance | Problems
Volume: 15
Pages: 150-160
ISSN/eISSN: 16633571/16634144
|
Citations: 2
Article #:
Source ID: 21100216324
Funding:
|
| 1116 |
Title: Instantaneous exhaust emissions and fuel consumption in gasoline vehicles: Testing and empirical analysis
Authors: Singh M.
Journal: International Journal of Vehicle Structures and Systems
DOI: 10.4273/ijvss.7.1.10
Published: 2015
|
Type: Article
Keywords: Empirical model | Exhaust emissions | Fuel consumption | Fuel economy speed | Gasoline vehicle
Volume: 7
Pages: 47-50
ISSN/eISSN: 09753060/09753540
|
Citations: 1
Article #:
Source ID: 21100197978
Funding:
|
| 1117 |
Title: Investigating creep performance and predicting rupture time for rotating FGM disc under different thermal gradients
Authors: Khanna K.
Journal: Computers Materials and Continua
DOI:
Published: 2015
|
Type: Article
Keywords: Creep | Functionally graded material | Rotating disc | Rupture time | Thermal gradient
Volume: 48
Pages: 147-161
ISSN/eISSN: 15462218/15462226
|
Citations: 0
Article #:
Source ID: 24364
Funding:
|
| 1118 |
Title: CFD analysis of a fluidized bed combustor based on co-firing
Authors: Kumar H.
Journal: ASME International Mechanical Engineering Congress and Exposition Proceedings Imece
DOI: 10.1115/IMECE2015-50317
Published: 2015
|
Type: Conference Paper
Keywords: Biomass | CFD | Co-firing | Combustion | Fluidized bed
Volume: 8A-2015
Pages:
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21100775050
Funding:
|
| 1119 |
Title: Graphical model-based design of intelligent autonomous vehicle
Authors: Bera T.
Journal: 2015 IEEE International Conference on Robotics and Biomimetics IEEE Robio 2015
DOI: 10.1109/ROBIO.2015.7419080
Published: 2015
|
Type: Conference Paper
Keywords:
Volume:
Pages: 2078-2083
ISSN/eISSN: /
|
Citations: 0
Article #: 7419080
Source ID: 21100824859
Funding:
|
| 1120 |
Title: Preface
Authors: Mallick S.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2014.958811
Published: 2 January 2015
|
Type: Editorial
Keywords:
Volume: 33
Pages: 1
ISSN/eISSN: 02726351/15480046
|
Citations: 0
Article #:
Source ID: 13661
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 1121 |
Title: D-H parameters augmented with dummy frames for serial manipulators containing spatial links
Authors: Singh A.
Journal: IEEE Ro Man 2014 23rd IEEE International Symposium on Robot and Human Interactive Communication Human Robot Co Existence Adaptive Interfaces and Systems for Daily Life Therapy Assistance and Socially Engaging Interactions
DOI: 10.1109/ROMAN.2014.6926379
Published: 15 October 2014
|
Type: Conference Paper
Keywords: D-H algorithm | Dummy Frames | medical surgery | serial manipulator | spatial link
Volume:
Pages: 975-980
ISSN/eISSN: /
|
Citations: 13
Article #: 6926379
Source ID: 21100399709
Funding:
|
| 1122 |
Title: Anisotropic CuO nanostructures of different size and shape exhibit thermal conductivity superior than typical bulk powder
Authors: Pal B.
Journal: Colloids and Surfaces A Physicochemical and Engineering Aspects
DOI: 10.1016/j.colsurfa.2014.07.017
Published: 5 October 2014
|
Type: Article
Keywords: CuO nanostructures | Density | Dispersion stability | Thermal conductivity | Zeta potential
Volume: 459
Pages: 282-289
ISSN/eISSN: 09277757/18734359
|
Citations: 23
Article #:
Source ID: 26589
Funding: University Grants Commission
|
| 1123 |
Title: Damage detection in submerged plates using ultrasonic guided waves
Authors: Sharma S.
Journal: Sadhana Academy Proceedings in Engineering Sciences
DOI: 10.1007/s12046-014-0255-4
Published: 4 October 2014
|
Type: Article
Keywords: dispersion | guided waves | modes | notches | submerged plates | Ultrasonic
Volume: 39
Pages: 1009-1034
ISSN/eISSN: 02562499/09737677
|
Citations: 14
Article #:
Source ID: 23531
Funding: Naval Research Board
|
| 1124 |
Title: Performance characteristics of centrifugal slurry pump with multi-sized particulate bottom and fly ash mixtures
Authors: Kumar S.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2014.894163
Published: 3 September 2014
|
Type: Article
Keywords: Bottom ash | centrifugal slurry pump | fly ash | performance characteristics
Volume: 32
Pages: 466-476
ISSN/eISSN: 02726351/15480046
|
Citations: 81
Article #:
Source ID: 13661
Funding:
|
| 1125 |
Title: Development of automatic GMAW setup for process improvements: Experimental and modeling approach
Authors: Bhattacharya A.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2014.892611
Published: 3 August 2014
|
Type: Article
Keywords: Automatic | Bond-graph | Efficiency | GMAW | Penetration | Spatter
Volume: 29
Pages: 988-995
ISSN/eISSN: 10426914/15322475
|
Citations: 17
Article #:
Source ID: 21054
Funding:
|
| 1126 |
Title: Modeling thermal conductivity for alumina-water nanofluids
Authors: Mishra A.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2013.835599
Published: 4 May 2014
|
Type: Article
Keywords: Brinkman number | dimensionless analysis | nanofluids | theoretical models | thermal conductivity
Volume: 32
Pages: 319-326
ISSN/eISSN: 02726351/15480046
|
Citations: 10
Article #:
Source ID: 13661
Funding:
|
| 1127 |
Title: Study of surface properties in particulate-reinforced metal matrix composites (MMCs) using powder-mixed electrical discharge machining (EDM)
Authors: Sidhu S.S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2013.852211
Published: 2014
|
Type: Article
Keywords: Metal matrix composites | Microhardness | Powder mixed EDM | Surface integrity
Volume: 29
Pages: 46-52
ISSN/eISSN: 10426914/15322475
|
Citations: 129
Article #:
Source ID: 21054
Funding:
|
| 1128 |
Title: Microwave cladding: A new approach in surface engineering
Authors: Gupta D.
Journal: Journal of Manufacturing Processes
DOI: 10.1016/j.jmapro.2014.01.001
Published: April 2014
|
Type: Article
Keywords: Characterization | Elemental dilution | Hybrid heating | Microwave cladding
Volume: 16
Pages: 176-182
ISSN/eISSN: 15266125/
|
Citations: 98
Article #:
Source ID: 27677
Funding:
|
| 1129 |
Title: A hybrid Taguchi-artificial neural network approach to predict surface roughness during electric discharge machining of titanium alloys
Authors: Kumar S.
Journal: Journal of Mechanical Science and Technology
DOI: 10.1007/s12206-014-0637-x
Published: July 2014
|
Type: Article
Keywords: ANOVA | Artificial neural network (ANN) | Electric discharge machining (EDM) | Surface roughness (SR) | Taguchi | Titanium; Machining
Volume: 28
Pages: 2831-2844
ISSN/eISSN: 1738494X/
|
Citations: 85
Article #:
Source ID: 144699
Funding:
|
| 1130 |
Title: Local micromechanics of moisture diffusion in fiber reinforced polymer composites
Authors: Jain D.
Journal: International Journal of Heat and Mass Transfer
DOI: 10.1016/j.ijheatmasstransfer.2014.04.031
Published: September 2014
|
Type: Article
Keywords: Environmental degradation | Fickian diffusion | Finite element analysis (FEA) | Microstructures | Polymer-matrix composites (PMCs) | Transport properties
Volume: 76
Pages: 199-209
ISSN/eISSN: 00179310/
|
Citations: 31
Article #:
Source ID: 20448
Funding:
|
| 1131 |
Title: A multipoint method for 5-axis machining of triangulated surface models
Authors: Duvedi R.
Journal: CAD Computer Aided Design
DOI: 10.1016/j.cad.2014.02.008
Published: July 2014
|
Type: Article
Keywords: 5-axis machining | CNC machining | Multipoint machining | STL
Volume: 52
Pages: 17-26
ISSN/eISSN: 00104485/
|
Citations: 25
Article #:
Source ID: 18145
Funding:
|
| 1132 |
Title: Hard turning: Parametric optimization using genetic algorithm for rough/finish machining and study of surface morphology
Authors: Batish A.
Journal: Journal of Mechanical Science and Technology
DOI: 10.1007/s12206-014-0308-y
Published: May 2014
|
Type: Article
Keywords: EN 31 | EN 9 | Genetic algorithms | Hard turning | SAE 8620 | SEM | XRD analysis
Volume: 28
Pages: 1629-1640
ISSN/eISSN: 1738494X/
|
Citations: 21
Article #:
Source ID: 144699
Funding:
|
| 1133 |
Title: On improving solid friction factor modeling for fluidized dense-phase pneumatic conveying systems
Authors: Setia G.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2014.02.006
Published: May 2014
|
Type: Article
Keywords: Fluidized dense-phase | Modeling | Pneumatic conveying | Pressure drop | Solids friction factor | Volumetric loading ratio
Volume: 257
Pages: 88-103
ISSN/eISSN: 00325910/1873328X
|
Citations: 19
Article #:
Source ID: 13717
Funding:
|
| 1134 |
Title: Influence of heat input in automatic GMAW: Penetration prediction and microstructural observation
Authors: Bhattacharya A.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2014.930889
Published: 2014
|
Type: Article
Keywords: Automatic | Bond graph | GMAW | Heat | Input | Microstructure | Penetration
Volume: 29
Pages: 1210-1218
ISSN/eISSN: 10426914/15322475
|
Citations: 14
Article #:
Source ID: 21054
Funding:
|
| 1135 |
Title: Surface roughness and profile error in precision diamond turning of C18000
Authors: Gupta A.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2014.901529
Published: 2014
|
Type: Article
Keywords: Diamond tool | Profile error | Surface roughness | Ultra-precision machining
Volume: 29
Pages: 606-613
ISSN/eISSN: 10426914/15322475
|
Citations: 13
Article #:
Source ID: 21054
Funding:
|
| 1136 |
Title: Transportation performance of highly concentrated coal-water slurries prepared from Indian coals
Authors: Chakravarty A.
Journal: Applied Mechanics and Materials
DOI: 10.4028/www.scientific.net/AMM.592-594.869
Published: 2014
|
Type: Conference Paper
Keywords: Coal-water slurry | Non-newtonian fluid flow | Rheology
Volume: 592-594
Pages: 869-873
ISSN/eISSN: 16609336/16627482
|
Citations: 9
Article #:
Source ID: 4700151914
Funding:
|
| 1137 |
Title: Finite element modeling and analysis of powder mixed electric discharge machining process for temperature distribution and volume removal considering multiple craters
Authors: Singh H.
Journal: International Journal of Modeling Simulation and Scientific Computing
DOI: 10.1142/S1793962314500093
Published: September 2014
|
Type: Article
Keywords: Finite element simulation | multiple sparks | powder mixed electric discharge machining | temperature distribution | volume removal
Volume: 5
Pages:
ISSN/eISSN: 17939623/17939615
|
Citations: 6
Article #: 14500093
Source ID: 19900192598
Funding:
|
| 1138 |
Title: An experimental study to evaluate the effect of ambient temperature during manual lifting and design of optimal task parameters
Authors: Singh R.P.
Journal: Human Factors and Ergonomics in Manufacturing
DOI: 10.1002/hfm.20353
Published: January 2014
|
Type: Article
Keywords:
Volume: 24
Pages: 54-70
ISSN/eISSN: 10908471/15206564
|
Citations: 6
Article #:
Source ID: 21101229244
Funding:
|
| 1139 |
Title: A novel ball end magnetorheological finishing process
Authors: Anant K.S.
Journal: ASME International Mechanical Engineering Congress and Exposition Proceedings Imece
DOI: 10.1115/IMECE2014-36284
Published: 2014
|
Type: Conference Paper
Keywords: Finishing tool | Magnetorheological finishing | Nanofinishing
Volume: 2B
Pages:
ISSN/eISSN: /
|
Citations: 4
Article #: 36284
Source ID: 21100197168
Funding:
|
| 1140 |
Title: Determining safe limits for significant task parameters during manual lifting
Authors: Singh R.P.
Journal: Workplace Health and Safety
DOI: 10.3928/21650799-20140305-03
Published: April 2014
|
Type: Article
Keywords:
Volume: 62
Pages: 150-160
ISSN/eISSN: 21650799/21650969
|
Citations: 3
Article #:
Source ID: 21100200604
Funding:
|
| 1141 |
Title: Morphological characterization of β phase in poly-(vinylidenefluoride) film prepared by spin cast method
Authors: Mehtani H.
Journal: Aip Conference Proceedings
DOI: 10.1063/1.4872823
Published: 2014
|
Type: Conference Paper
Keywords: FTIR | Morphology by SEM | Polymer Cross Linkage
Volume: 1591
Pages: 975-976
ISSN/eISSN: 0094243X/15517616
|
Citations: 1
Article #:
Source ID: 26916
Funding:
|
| 1142 |
Title: Tool path generation for free-form surfaces using B-spline surface
Authors: Singh Randhawa S.
Journal: Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-81-322-1859-3_6
Published: 2014
|
Type: Book Chapter
Keywords: B-spline surface | Free-form surfaces | NC/CNC machines | Tool path generation
Volume: 15
Pages: 57-71
ISSN/eISSN: 21954356/21954364
|
Citations: 0
Article #:
Source ID: 21100431311
Funding:
|
| 1143 |
Title: Enhancing technological innovation in small firms: Role of collaboration
Authors: Singh D.
Journal: Iop Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899X/65/1/012026
Published: 2014
|
Type: Conference Paper
Keywords: Collaboration | MSMEs | R&D | Technological Innovation
Volume: 65
Pages:
ISSN/eISSN: 17578981/1757899X
|
Citations: 0
Article #: 012026
Source ID: 19700200831
Funding:
|
| 1144 |
Title: Validated scale-up procedure to predict blockage condition for fluidized dense-phase pneumatic conveying systems
Authors: Setia G.
Journal: Particuology
DOI: 10.1016/j.partic.2012.11.007
Published: December 2013
|
Type: Article
Keywords: Blockage boundary | Fluidized dense-phase | Minimum conveying velocity | Pneumatic conveying | Scale up
Volume: 11
Pages: 657-663
ISSN/eISSN: 16742001/
|
Citations: 11
Article #:
Source ID: 10900153324
Funding:
|
| 1145 |
Title: Neural network-based modeling to predict residual stresses during electric discharge machining of Al/SiC metal matrix composites
Authors: Sidhu S.S.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/0954405413492505
Published: November 2013
|
Type: Conference Paper
Keywords: Electric discharge machining | Metal matrix composites | Micrographs | Neural networking | Residual stress
Volume: 227
Pages: 1679-1692
ISSN/eISSN: 09544054/20412975
|
Citations: 29
Article #:
Source ID: 20406
Funding:
|
| 1146 |
Title: Fabrication and electrical discharge machining of metal-matrix composites: A review
Authors: Sidhu S.S.
Journal: Journal of Reinforced Plastics and Composites
DOI: 10.1177/0731684413489366
Published: September 2013
|
Type: Review
Keywords: electric discharge machining | Metal matrix composite | residual stress
Volume: 32
Pages: 1310-1320
ISSN/eISSN: 07316844/15307964
|
Citations: 40
Article #:
Source ID: 21185
Funding:
|
| 1147 |
Title: Biomass-based gasifiers for internal combustion (IC) engines-A review
Authors: Malik A.
Journal: Sadhana Academy Proceedings in Engineering Sciences
DOI: 10.1007/s12046-013-0145-1
Published: June 2013
|
Type: Review
Keywords: Biomass | gasification | producer gas
Volume: 38
Pages: 461-476
ISSN/eISSN: 02562499/09737677
|
Citations: 42
Article #:
Source ID: 23531
Funding:
|
| 1148 |
Title: Effect of addition of fly ash and drag reducing on the rheological properties of bottom ash
Authors: Kumar S.
Journal: International Journal of Mechanical and Materials Engineering
DOI:
Published: 2013
|
Type: Article
Keywords: Additive | Bottom ash | Fly ash | Relative viscosity | Rheology
Volume: 8
Pages: 1-8
ISSN/eISSN: 18230334/
|
Citations: 34
Article #:
Source ID: 10900153301
Funding:
|
| 1149 |
Title: Investigation on centrifugal slurry pump performance with variation of operating speed
Authors: Kumar S.
Journal: International Journal of Mechanical and Materials Engineering
DOI:
Published: 2013
|
Type: Article
Keywords: Affinity laws | Centrifugal slurry pump | Numerical simulation | Performance characteristics
Volume: 8
Pages: 40-47
ISSN/eISSN: 18230334/
|
Citations: 11
Article #:
Source ID: 10900153301
Funding:
|
| 1150 |
Title: Investigating straight-pipe pneumatic conveying characteristics for fluidized dense-phase pneumatic conveying
Authors: Bansal A.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2012.732677
Published: 7 April 2013
|
Type: Article
Keywords: Dense phase | Pneumatic conveying | Pressure drop | Pressure minimum curve | Straight-pipe conveying characteristics
Volume: 31
Pages: 348-356
ISSN/eISSN: 02726351/15480046
|
Citations: 9
Article #:
Source ID: 13661
Funding:
|
| 1151 |
Title: Modeling dense-phase pneumatic conveying of powders using suspension density
Authors: Mallick S.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2012.660271
Published: 7 April 2013
|
Type: Article
Keywords: Dense-phase | Pneumatic conveying | Pressure drop | Suspension density
Volume: 31
Pages: 340-347
ISSN/eISSN: 02726351/15480046
|
Citations: 2
Article #:
Source ID: 13661
Funding:
|
| 1152 |
Title: EDM of metal matrix composite for parameter design using lexicographic goal programming
Authors: Sidhu S.S.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2013.763958
Published: 1 April 2013
|
Type: Article
Keywords: Lexicographic goal programming (LGP) | Material removal rate (MRR) | Metal matrix composite (MMC) | Recast layer (RCL) thickness | Surface roughness (SR) | Tool wear rate (TWR)
Volume: 28
Pages: 495-500
ISSN/eISSN: 10426914/15322475
|
Citations: 23
Article #:
Source ID: 21054
Funding:
|
| 1153 |
Title: Dynamic Analysis of Condenser Assembly of Automobile Air Conditioning System Using CAE Tools
Authors: Singh M.
Journal: Journal of the Institution of Engineers India Series C
DOI: 10.1007/s40032-013-0067-z
Published: 1 April 2013
|
Type: Article
Keywords: Automobile | CAE | Condenser | Dynamic analysis | Optimization
Volume: 94
Pages: 135-145
ISSN/eISSN: 22500545/22500553
|
Citations: 1
Article #:
Source ID: 21100831410
Funding:
|
| 1154 |
Title: Non-linear flexural and dynamic response of CNT reinforced laminated composite plates
Authors: Bhardwaj G.
Journal: Composites Part B Engineering
DOI: 10.1016/j.compositesb.2012.09.004
Published: February 2013
|
Type: Article
Keywords: A. Carbon nanotube | A. Laminates | B. Dynamic | C. Chebyshev
Volume: 45
Pages: 89-100
ISSN/eISSN: 13598368/
|
Citations: 70
Article #:
Source ID: 28635
Funding:
|
| 1155 |
Title: Surface characterization and material migration during surface modification of die steels with silicon, graphite and tungsten powder in EDM process
Authors: Bhattacharya A.
Journal: Journal of Mechanical Science and Technology
DOI: 10.1007/s12206-012-0883-8
Published: January 2013
|
Type: Article
Keywords: Electric discharge machining | Energy dispersive spectroscopy | Material migration | Microhardness | Powder mixed dielectric | Scanning electron microscopy | Surface roughness
Volume: 27
Pages: 133-140
ISSN/eISSN: 1738494X/
|
Citations: 108
Article #:
Source ID: 144699
Funding:
|
| 1156 |
Title: An investigation into modelling thermal conductivity for alumina-water nanofluids
Authors: Mallick S.S.
Journal: Powder Technology
DOI: 10.1016/j.powtec.2012.08.003
Published: January 2013
|
Type: Article
Keywords: Brinkman number | Dimensionless analysis | Nanofluids | Theoretical models | Thermal conductivity
Volume: 233
Pages: 234-244
ISSN/eISSN: 00325910/1873328X
|
Citations: 51
Article #:
Source ID: 13717
Funding:
|
| 1157 |
Title: Diagnostics for pretesting questionnaires: A comparative analysis
Authors: Nanda T.
Journal: International Journal of Technology Policy and Management
DOI: 10.1504/IJTPM.2013.051008
Published: 2013
|
Type: Article
Keywords: Behaviour coding | Cognitive interview | Expert group | Informal test | Interviewer debriefi ng | Pretesting | Pretesting techniques | Respondent debriefi ng
Volume: 13
Pages: 67-79
ISSN/eISSN: 14684322/17415292
|
Citations: 11
Article #:
Source ID: 12764
Funding:
|
| 1158 |
Title: Electric discharge machining of 10vol% AL2O3/AL metal matrix composite - An experimental study
Authors: Sidhu S.S.
Journal: Materials Science Forum
DOI: 10.4028/www.scientific.net/MSF.751.9
Published: 2013
|
Type: Article
Keywords: Aluminum matrix composites | Electro-discharge | Layer | Machining | Material | Recast | Removal | Roughness | Tool | Wear
Volume: 751
Pages: 9-19
ISSN/eISSN: 02555476/16629752
|
Citations: 7
Article #:
Source ID: 28700
Funding:
|
| 1159 |
Title: Electric discharge machining of 10vol% AL2O3/AL metal matrix composite - An experimental study
Authors: Sidhu S.S.
Journal: Materials Science Forum
DOI: 10.4028/www.scientific.net/MSF.751.9
Published: 2013
|
Type: Article
Keywords: Aluminum matrix composites | Electro-discharge | Layer | Machining | Material | Recast | Removal | Roughness | Tool | Wear
Volume: 751
Pages: 9-19
ISSN/eISSN: 02555476/16629752
|
Citations: 7
Article #:
Source ID: 28700
Funding:
|
| 1160 |
Title: Predictor equations for estimating crater dimensions in PMEDM process using fem simulation and experimental validation
Authors: Bhattacharya A.
Journal: Materials Science Forum
DOI: 10.4028/www.scientific.net/MSF.751.45
Published: 2013
|
Type: Article
Keywords: Crater geometry | Electric discharge machining | Experimental validation | Finite element simulation | Powder mixed | Predictive equations
Volume: 751
Pages: 45-60
ISSN/eISSN: 02555476/16629752
|
Citations: 5
Article #:
Source ID: 28700
Funding:
|
| 1161 |
Title: Vibration suppression of a cart-flexible pole system using a hybrid controller
Authors: Singla A.
Journal: 1st International and 16th National Conference on Machines and Mechanisms Inacomm 2013
DOI:
Published: 2013
|
Type: Conference Paper
Keywords: Cart-pole | Command shaping | Flexible manipulators | Lumped parameter model | Vibration suppression
Volume:
Pages: 375-382
ISSN/eISSN: /
|
Citations: 4
Article #:
Source ID: 21100787000
Funding:
|
| 1162 |
Title: High-index norm approach: A redundancy resolution scheme for inverse kinematics of redundant serial manipulators
Authors: Singla A.
Journal: Proceedings 2013 6th Robotics and Mechatronics Conference Robmech 2013
DOI: 10.1109/RoboMech.2013.6685489
Published: 2013
|
Type: Conference Paper
Keywords: High-index norm | obstacle avoidance | redundancy resolution | redundant manipulators | task priority
Volume:
Pages: 40-45
ISSN/eISSN: /
|
Citations: 3
Article #: 6685489
Source ID: 21100285442
Funding:
|
| 1163 |
Title: Bond graph aided performance analysis of antilock braking system for a bicycle vehicle model with camber angle and fork angle
Authors: Bera T.K.
Journal: 1st International and 16th National Conference on Machines and Mechanisms Inacomm 2013
DOI:
Published: 2013
|
Type: Conference Paper
Keywords: Antilock braking system | Bond graph | Camber angle | Fork angle
Volume:
Pages: 70-76
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21100787000
Funding:
|
| 1164 |
Title: Bond graph modeling of an over-Actuated intelligent autonomous vehicle with decoupled steering wheel
Authors: Bera T.
Journal: 2012 IEEE International Conference on Robotics and Biomimetics Robio 2012 Conference Digest
DOI: 10.1109/ROBIO.2012.6491036
Published: 2012
|
Type: Conference Paper
Keywords: bond graph | four-wheel steering | intelligent autonomous vehicle
Volume:
Pages: 624-629
ISSN/eISSN: /
|
Citations: 0
Article #: 6491036
Source ID: 21100238403
Funding:
|
| 1165 |
Title: A New Method to Design Cam Used in Automobile Heating, Ventilating and Cooling System
Authors: Singh B.
Journal: Journal of the Institution of Engineers India Series C
DOI: 10.1007/s40032-012-0040-2
Published: 1 October 2012
|
Type: Article
Keywords: CAE tools | Cam design | HVAC | Kinematics
Volume: 93
Pages: 275-286
ISSN/eISSN: 22500545/22500553
|
Citations: 0
Article #:
Source ID: 21100831410
Funding:
|
| 1166 |
Title: Effect of channel and plenum aspect ratios on the performance of microchannel heat sink under different flow arrangements
Authors: Sehgal S.S.
Journal: Journal of Mechanical Science and Technology
DOI: 10.1007/s12206-012-0705-z
Published: September 2012
|
Type: Article
Keywords: Channel aspect ratio | Flow arrangements | Microchannel heat sink | Nusselt number | Plenum aspect ratio | Pressure drop
Volume: 26
Pages: 2985-2994
ISSN/eISSN: 1738494X/
|
Citations: 15
Article #:
Source ID: 144699
Funding:
|
| 1167 |
Title: Optimal parameter settings for rough and finish machining of die steels in powder-mixed EDM
Authors: Bhattacharya A.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-011-3716-5
Published: July 2012
|
Type: Article
Keywords: Electric discharge machining | Finish machining | Material removal | Powder-mixed dielectric | Rough machining | Surface finish | Tool wear
Volume: 61
Pages: 537-548
ISSN/eISSN: 02683768/14333015
|
Citations: 89
Article #:
Source ID: 20428
Funding:
|
| 1168 |
Title: Effect of process variables on microhardness, grain size and strain during machining of various die steels with powder-mixed electric-discharge machining using dummy treated experimental design
Authors: Bhattacharya A.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/0954405412442777
Published: July 2012
|
Type: Article
Keywords: Electric-discharge machining | grain size | material transfer | micro-strain | microhardness | powder mixed | process parameters | scanning electron microscopy | X-ray diffraction
Volume: 226
Pages: 1192-1204
ISSN/eISSN: 09544054/20412975
|
Citations: 17
Article #:
Source ID: 20406
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 1169 |
Title: Brown hemp methyl ester: Transesterification process and evaluation of fuel properties
Authors: Ragit S.S.
Journal: Biomass and Bioenergy
DOI: 10.1016/j.biombioe.2011.12.026
Published: June 2012
|
Type: Article
Keywords: Ester recovery | Fuel characterization | Methyl esterification | Optimization | Raw brown hemp oil | Renewable fuel
Volume: 41
Pages: 14-20
ISSN/eISSN: 09619534/
|
Citations: 27
Article #:
Source ID: 28810
Funding: Council of Scientific and Industrial Research, India
|
| 1170 |
Title: Experimental Investigation for Multi-Response Optimization of Bead Geometry in Submerged Arc Welding using Grey Analysis
Authors: Bhattacharya A.
Journal: Journal of the Institution of Engineers India Series C
DOI: 10.1007/s40032-012-0017-1
Published: 1 June 2012
|
Type: Article
Keywords: Bead geometry | Grey analysis | Multi-response optimization | SAW
Volume: 93
Pages: 123-132
ISSN/eISSN: 22500545/22500553
|
Citations: 6
Article #:
Source ID: 21100831410
Funding: Department of Science and Technology, Government of Kerala
|
| 1171 |
Title: Study of material transfer mechanism in die steels using powder mixed electric discharge machining
Authors: Batish A.
Journal: Materials and Manufacturing Processes
DOI: 10.1080/10426914.2011.585498
Published: 1 April 2012
|
Type: Conference Paper
Keywords: Die | Electric-discharge | Material transfer | Microhardness | Microstructure | Modification | Powder | Steels | Surface
Volume: 27
Pages: 449-456
ISSN/eISSN: 10426914/15322475
|
Citations: 70
Article #:
Source ID: 21054
Funding: Department of Science and Technology, Ministry of Science and Technology, India
|
| 1172 |
Title: Bunching characteristics of silicon nanowire arrays
Authors: Khorasaninejad M.
Journal: Journal of Applied Physics
DOI: 10.1063/1.3688025
Published: 15 February 2012
|
Type: Article
Keywords:
Volume: 111
Pages:
ISSN/eISSN: 00218979/
|
Citations: 45
Article #: 044328
Source ID: 28132
Funding: National Science Foundation
|
| 1173 |
Title: Optimization of powder mixed electric discharge machining using dummy treated experimental design with analytic hierarchy process
Authors: Bhattacharya A.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1177/0954405411402876
Published: January 2012
|
Type: Conference Paper
Keywords: Analytic hierarchy process | Dummy treatment | Optimization | Powder mixed electric discharge machining | Taguchi design
Volume: 226
Pages: 103-116
ISSN/eISSN: 09544054/20412975
|
Citations: 41
Article #:
Source ID: 20406
Funding:
|
| 1174 |
Title: Electric discharge machining of titanium and its alloys: A review
Authors: Kumar S.
Journal: International Journal of Machining and Machinability of Materials
DOI: 10.1504/IJMMM.2012.044922
Published: January 2012
|
Type: Review
Keywords: EDM | Electric discharge machining | Material removal rate | MRR | Surface improvements | Surface roughness | Titanium alloys | Tool wear rate | TWR
Volume: 11
Pages: 84-111
ISSN/eISSN: 17485711/1748572X
|
Citations: 32
Article #:
Source ID: 12400154711
Funding:
|
| 1175 |
Title: FE simulation and experimental validation of powder mixed EDM process for estimating the temperature distribution and volume removed in single crater
Authors: Bhattacharya A.
Journal: International Journal of Modeling Simulation and Scientific Computing
DOI: 10.1142/S1793962312500067
Published: June 2012
|
Type: Article
Keywords: cooling rate | crater | electric discharge machining | experimental validation | Finite element | powder mixed | simulation | stress
Volume: 3
Pages:
ISSN/eISSN: 17939623/17939615
|
Citations: 23
Article #: 1250006
Source ID: 19900192598
Funding:
|
| 1176 |
Title: FE simulation and experimental validation of powder mixed EDM process for estimating the temperature distribution and volume removed in single crater
Authors: Bhattacharya A.
Journal: International Journal of Modeling Simulation and Scientific Computing
DOI: 10.1142/S1793962312500067
Published: June 2012
|
Type: Article
Keywords: cooling rate | crater | electric discharge machining | experimental validation | Finite element | powder mixed | simulation | stress
Volume: 3
Pages:
ISSN/eISSN: 17939623/17939615
|
Citations: 23
Article #: 1250006
Source ID: 19900192598
Funding:
|
| 1177 |
Title: Experimental studies to validate simulated results for nozzle effectiveness using multi-response optimisation during cylindrical grinding process
Authors: Bhattacharya A.
Journal: International Journal of Materials Engineering Innovation
DOI: 10.1504/IJMATEI.2012.049261
Published: September 2012
|
Type: Article
Keywords: Computational fluid simulation | Cylindrical grinding | Dimensional control | Microhardness | Multi-response optimisation | Nozzle effectiveness | Surface roughness
Volume: 3
Pages: 165-189
ISSN/eISSN: 17572754/17572762
|
Citations: 2
Article #:
Source ID: 17800156732
Funding:
|
| 1178 |
Title: Strategic alignment of organizational culture issues for stimulating creativity and innovation
Authors: Dixit G.
Journal: International Journal of Applied Engineering Research
DOI:
Published: 2011
|
Type: Article
Keywords: Indigenous technology development | Innovation | Organizational Creativity | Organizational culture & climate | SMEs
Volume: 6
Pages: 471-480
ISSN/eISSN: 09734562/09739769
|
Citations: 1
Article #:
Source ID: 21100217234
Funding:
|
| 1179 |
Title: Effect of parameters on predicted Stresses during Single Point Incremental Forming
Authors: Bhattacharya A.
Journal: International Journal of Applied Engineering Research
DOI:
Published: 2011
|
Type: Article
Keywords:
Volume: 6
Pages: 533-544
ISSN/eISSN: 09734562/09739769
|
Citations: 0
Article #:
Source ID: 21100217234
Funding:
|
| 1180 |
Title: Elasto-plastic analysis of corten steel using finite element method
Authors: Saini J.
Journal: International Journal of Applied Engineering Research
DOI:
Published: 2011
|
Type: Article
Keywords: Corten Steel | Elasto-Plastic range | FEM | Non-linear analysis | Tensile Test
Volume: 6
Pages: 481-497
ISSN/eISSN: 09734562/09739769
|
Citations: 0
Article #:
Source ID: 21100217234
Funding:
|
| 1181 |
Title: Mechanism of material deposition from powder, electrode and dielectric for surface modification of H11and H13 die steels in EDM process
Authors: Batish A.
Journal: Materials Science Forum
DOI: 10.4028/www.scientific.net/MSF.701.61
Published: 27 October 2011
|
Type: Article
Keywords: Die steels | Dielectric | Electrode | Material transfer | Microhardness | Microstructure | Powder | Powder mixed electric discharge machining | Surface properties
Volume: 701
Pages: 61-75
ISSN/eISSN: 02555476/16629752
|
Citations: 24
Article #:
Source ID: 28700
Funding:
|
| 1182 |
Title: Surface modification of High Carbon High Chromium, EN31 and Hot die steel using powder mixed EDM process
Authors: Bhattacharya A.
Journal: Materials Science Forum
DOI: 10.4028/www.scientific.net/MSF.701.43
Published: 27 October 2011
|
Type: Article
Keywords: Electric discharge machining | Material transfer | Microhardness | Microstructure | Powder | Surface modification
Volume: 701
Pages: 43-59
ISSN/eISSN: 02555476/16629752
|
Citations: 17
Article #:
Source ID: 28700
Funding:
|
| 1183 |
Title: Multi-response optimization of process parameters in cold chamber pressure die casting
Authors: Kumar L.
Journal: Journal of the Institution of Engineers India Part PR Production Engineering Division
DOI:
Published: 18 September 2011
|
Type: Article
Keywords: Cold chamber die casting | Multi-response optimization | Process parameters | Signal-to-noise ratio | Taguchi design
Volume: 92
Pages: 19-24
ISSN/eISSN: 02576708/
|
Citations: 0
Article #:
Source ID: 12271
Funding:
|
| 1184 |
Title: On improving scale-up procedures for dense-phase pneumatic conveying of powders
Authors: Mallick S.S.
Journal: Particulate Science and Technology
DOI: 10.1080/02726351.2010.505635
Published: September 2011
|
Type: Article
Keywords: dense-phase | pneumatic conveying | scale-up | solids friction | two-layer modeling
Volume: 29
Pages: 407-427
ISSN/eISSN: 02726351/15480046
|
Citations: 6
Article #:
Source ID: 13661
Funding:
|
| 1185 |
Title: Numerical verification of CNC machine simulations
Authors: Israeli G.
Journal: Computer Aided Design and Applications
DOI: 10.3722/cadaps.2011.507-518
Published: 2011
|
Type: Article
Keywords: Cnc simulation | Error evaluation | Grazing curve | Swept surface
Volume: 8
Pages: 507-518
ISSN/eISSN: 16864360/
|
Citations: 0
Article #:
Source ID: 4700151607
Funding:
|
| 1186 |
Title: Experimental investigation of the effect of flow arrangements on the performance of a micro-channel heat sink
Authors: Sehgal S.S.
Journal: Experimental Heat Transfer
DOI: 10.1080/08916152.2010.523808
Published: July 2011
|
Type: Article
Keywords: flow arrangements | inlet and outlet plenums | micro-channel heat sink | Nusselt number | pressure drop
Volume: 24
Pages: 215-233
ISSN/eISSN: 08916152/15210480
|
Citations: 36
Article #:
Source ID: 13719
Funding:
|
| 1187 |
Title: Comparative study of engine performance and exhaust emission characteristics of a single cylinder 4-stroke CI engine operated on the esters of hemp oil and neem oil
Authors: Ragit S.S.
Journal: Indian Journal of Engineering and Materials Sciences
DOI:
Published: June 2011
|
Type: Article
Keywords: Biodiesel | Comparative analysis | Diesel engine | Emission characteristics | Fuel properties | Performance characteristics
Volume: 18
Pages: 204-210
ISSN/eISSN: 09714588/09751017
|
Citations: 12
Article #:
Source ID: 29812
Funding:
|
| 1188 |
Title: Effect of process parameters on microhardness and microstructure of heat affected zone in submerged arc welding
Authors: Kumar P.
Journal: Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
DOI: 10.1243/09544054JEM2143
Published: May 2011
|
Type: Article
Keywords: Experimental design | HAZ | Microhardness | Microstructure | SAW
Volume: 225
Pages: 711-721
ISSN/eISSN: 09544054/20412975
|
Citations: 13
Article #:
Source ID: 20406
Funding:
|
| 1189 |
Title: Optimization of neem methyl ester from transesterification process and fuel characterization as a diesel substitute
Authors: Ragit S.S.
Journal: Biomass and Bioenergy
DOI: 10.1016/j.biombioe.2010.12.004
Published: March 2011
|
Type: Article
Keywords: Biodiesel fuel | Filtered neem oil | Fuel properties | Methyl esterification | Neem methyl ester
Volume: 35
Pages: 1138-1144
ISSN/eISSN: 09619534/
|
Citations: 90
Article #:
Source ID: 28810
Funding: Council of Scientific and Industrial Research, India
|
| 1190 |
Title: Ultrasonic machining of titanium and its alloys: A state of art review and future prospective
Authors: Dhuria G.K.
Journal: International Journal of Machining and Machinability of Materials
DOI: 10.1504/IJMMM.2011.043088
Published: October 2011
|
Type: Article
Keywords: Accuracy | Material removal rate | MRR | SR | Surface roughness | Ti | Titanium | Tool wear rate | TWR | Ultrasonic machining | USM
Volume: 10
Pages: 326-355
ISSN/eISSN: 17485711/1748572X
|
Citations: 7
Article #:
Source ID: 12400154711
Funding:
|
| 1191 |
Title: Multi-response optimization and empirical modeling of cardiopulmonary responses during manual lifting tasks
Authors: Batish A.
Journal: Human Factors and Ergonomics in Manufacturing
DOI: 10.1002/hfm.20211
Published: January 2011
|
Type: Article
Keywords: Heart rate | Lifting task | Multi-response | Multi-response signal-to-noise | Optimization | Oxygen uptake | Signal-to-noise ratio
Volume: 21
Pages: 29-43
ISSN/eISSN: 10908471/15206564
|
Citations: 5
Article #:
Source ID: 21101229244
Funding:
|
| 1192 |
Title: Effect of parameters in resistance micro-welding of stainless steel cross wire using fractional factorial experimental design
Authors: Kim J.M.
Journal: International Journal of Manufacturing Research
DOI: 10.1504/IJMR.2011.041131
Published: July 2011
|
Type: Article
Keywords: Anova | Cross wire | Resistance micro-welding | Stainless steel | Taguchi design
Volume: 6
Pages: 290-303
ISSN/eISSN: 17500591/17500605
|
Citations: 5
Article #:
Source ID: 11200153523
Funding:
|
| 1193 |
Title: Analyzing S/N ratio optimization of physiological stress of Indian male workers in summer & winter during manual lifting tasks
Authors: Singh R.P.
Journal: Contemporary Ergonomics and Human Factors 2011
DOI: 10.1201/b11337-45
Published: 2011
|
Type: Conference Paper
Keywords:
Volume:
Pages: 270-277
ISSN/eISSN: /
|
Citations: 0
Article #:
Source ID: 21100201967
Funding:
|
| 1194 |
Title: Failure mode of steel tension members due to change in connection eccentricity and connection length
Authors: Saini J.S.
Journal: Journal of the Institution of Engineers India Civil Engineering Division
DOI:
Published: 18 November 2010
|
Type: Article
Keywords: Connection eccentricity | Connection length | Steel tension members | UTM
Volume: 91
Pages: 8-14
ISSN/eISSN: 0020336X/
|
Citations: 0
Article #:
Source ID: 16169
Funding:
|
| 1195 |
Title: Effect of flow arrangements on thermohydraulic performance of a microchannel heat sink
Authors: Sehgal S.S.
Journal: Proceedings of the ASME Micro Nanoscale Heat and Mass Transfer International Conference 2009 Mnhmt2009
DOI: 10.1115/MNHMT2009-18016
Published: 2010
|
Type: Conference Paper
Keywords: Flow conditions | Inlet and outlet plenums | Microchannels | Reynolds number | Temperature profiles
Volume: 3
Pages: 13-19
ISSN/eISSN: /
|
Citations: 2
Article #:
Source ID: 21100496242
Funding:
|
| 1196 |
Title: Performance and emission evaluation of a diesel engine fueled with methyl ester of neem oil and filtered neem oil
Authors: Ragit S.S.
Journal: Journal of Scientific and Industrial Research
DOI:
Published: January 2010
|
Type: Article
Keywords: Engine performance and emission | Filtered neem oil | Neem oil methyl ester (NOME) | Transesterification
Volume: 69
Pages: 62-66
ISSN/eISSN: 00224456/
|
Citations: 23
Article #:
Source ID: 23649
Funding:
|
| 1197 |
Title: Fractional factorial analysis of lifting and carrying tasks on postural score to investigate the effect of contributing parameters and their interactions
Authors: Batish A.
Journal: International Journal of Industrial and Systems Engineering
DOI: 10.1504/IJISE.2010.035014
Published: September 2010
|
Type: Article
Keywords: Experimental design | Lifting and carrying tasks | Rapid upper limb assessment | RULA
Volume: 6
Pages: 301-320
ISSN/eISSN: 17485037/17485045
|
Citations: 1
Article #:
Source ID: 5800179616
Funding:
|
| 1198 |
Title: Implementation of JIT methodology through axiomatic design approach
Authors: Jadeja S.
Journal: Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century Lem 2009
DOI:
Published: 2009
|
Type: Conference Paper
Keywords: Axiomatic design | JIT
Volume:
Pages:
ISSN/eISSN: /
|
Citations: 2
Article #:
Source ID: 21100255519
Funding:
|
| 1199 |
Title: Investigating and modeling tool-wear rate in the ultrasonic machining of titanium
Authors: Kumar J.
Journal: International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-008-1556-8
Published: April 2009
|
Type: Article
Keywords: Dimensional analysis | Micro-model | Taguchi method | Titanium | Tool-wear rate | Ultrasonic machining
Volume: 41
Pages: 1107-1117
ISSN/eISSN: 02683768/14333015
|
Citations: 38
Article #:
Source ID: 20428
Funding:
|
| 1200 |
Title: Stress analysis and optimization of rolling mill housing using CAE
Authors: Saini J.
Journal: Journal of the Institution of Engineers India Mechanical Engineering Division
DOI:
Published: 19 January 2009
|
Type: Review
Keywords: Computer aided engineering | Finite element analysis | Rolling mill housing
Volume: 89
Pages: 35-42
ISSN/eISSN: 00203408/
|
Citations: 0
Article #:
Source ID: 20390
Funding:
|
| 1201 |
Title: Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA
Authors: Bhattacharya A.
Journal: Production Engineering
DOI: 10.1007/s11740-008-0132-2
Published: 2009
|
Type: Article
Keywords: ANOVA | High speed machining | Power consumption | Surface roughness | Taguchi design
Volume: 3
Pages: 31-40
ISSN/eISSN: 09446524/18637353
|
Citations: 150
Article #:
Source ID: 15300154820
Funding:
|
| 1202 |
Title: Determinants of creativity and innovation in the workplace: A comprehensive review
Authors: Nanda T.
Journal: International Journal of Technology Policy and Management
DOI: 10.1504/IJTPM.2009.022845
Published: 2009
|
Type: Article
Keywords: Individual characteristics | Organisational climate | Organisational creativity | Organisational culture | Product innovation | Support system
Volume: 9
Pages: 84-106
ISSN/eISSN: 14684322/17415292
|
Citations: 20
Article #:
Source ID: 12764
Funding:
|
| 1203 |
Title: An assessment of the technology innovation initiatives in the Indian small-scale manufacturing industry
Authors: Nanda T.
Journal: International Journal of Technology Policy and Management
DOI: 10.1504/IJTPM.2009.025292
Published: May 2009
|
Type: Article
Keywords: Innovation | Interaction; R&D function | Manpower competence | Technology development | Technology infrastructure
Volume: 9
Pages: 173-207
ISSN/eISSN: 14684322/17415292
|
Citations: 15
Article #:
Source ID: 12764
Funding:
|
| 1204 |
Title: Optimization of surface roughness in an end-milling operation using nested experimental design
Authors: Patel K.
Journal: Production Engineering
DOI: 10.1007/s11740-009-0177-x
Published: January 2009
|
Type: Article
Keywords: End milling | Optimization | Surface Roughness | Taguchi's nested experimental design
Volume: 3
Pages: 361-373
ISSN/eISSN: 09446524/18637353
|
Citations: 10
Article #:
Source ID: 15300154820
Funding:
|
| 1205 |
Title: Accurate contour plotting using 6-node triangular elements in 2D
Authors: Singh C.
Journal: Finite Elements in Analysis and Design
DOI: 10.1016/j.finel.2008.07.011
Published: January 2009
|
Type: Article
Keywords: 6-Node element | Contour plotting | FEA | Linear interpolation | Quadratic interpolation
Volume: 45
Pages: 81-93
ISSN/eISSN: 0168874X/
|
Citations: 6
Article #:
Source ID: 18189
Funding: University Grants Commission
|
| 1206 |
Title: Strategic alignment of technological innovation initiatives in cutting tool industry in the region
Authors: Singh D.
Journal: International Journal of Technology Policy and Management
DOI: 10.1504/IJTPM.2009.032052
Published: March 2009
|
Type: Article
Keywords: Competitiveness | Cutting tool industry | R&D function | Research and development | Small-scale sector | SMEs | Technological innovation initiatives | Technology development
Volume: 9
Pages: 358-386
ISSN/eISSN: 14684322/17415292
|
Citations: 5
Article #:
Source ID: 12764
Funding:
|
| 1207 |
Title: CFD analysis of bubbling fluidized bed using rice husk
Authors: Singh R.I.
Journal: Proceedings of the 20th International Conference on Fluidized Bed Combustion
DOI: 10.1007/978-3-642-02682-9_133
Published: 2009
|
Type: Conference Paper
Keywords: CFD | Combustion | Eulerian multiphase model
Volume:
Pages: 857-863
ISSN/eISSN: /
|
Citations: 4
Article #:
Source ID: 19600157905
Funding:
|
| 1208 |
Title: Integrating lean manufacturing and six sigma by means of axiomatic design principles
Authors: Jadeja S.B.
Journal: ASME International Mechanical Engineering Congress and Exposition Proceedings
DOI: 10.1115/IMECE2008-69279
Published: 2009
|
Type: Conference Paper
Keywords: Axiomatic design | Lean manufacturing | Lean-sigma | Six sigma
Volume: 4
Pages: 449-455
ISSN/eISSN: /
|
Citations: 2
Article #:
Source ID: 21100197168
Funding:
|
| 1209 |
Title: Studies in an atmospheric bubbling fluidized-bed combustor of 10 MW power plant based on rice husk
Authors: Singh R.I.
Journal: Energy Conversion and Management
DOI: 10.1016/j.enconman.2008.06.011
Published: November 2008
|
Type: Article
Keywords: Carbon utilization efficiency | Defluidization | Exit gas composition | Fluidization | Rice husk | Three-phase model
Volume: 49
Pages: 3086-3103
ISSN/eISSN: 01968904/
|
Citations: 23
Article #:
Source ID: 29372
Funding:
|
| 1210 |
Title: Study of some performance parameters of an atmospheric bubbling fluidized be boiler based on coal washery rejects considering bubble growth along bed height
Authors: Mohapatra S.K.
Journal: Journal of Solid Waste Technology and Management
DOI:
Published: November 2008
|
Type: Article
Keywords: Bubble growth | Exit gas composition | Three phase model
Volume: 34
Pages: 213-224
ISSN/eISSN: 10881697/
|
Citations: 0
Article #:
Source ID: 25863
Funding:
|
| 1211 |
Title: An investigation into the machining characteristics of titanium using ultrasonic machining
Authors: Kumar J.
Journal: International Journal of Machining and Machinability of Materials
DOI: 10.1504/IJMMM.2008.017631
Published: March 2008
|
Type: Review
Keywords: Abrasive | Design of experiments | Full factorial design | Grit size | Material removal rate | MRR | Power rating | Surface roughness | Titanium | Tool wear rate | TWR | Ultrasonic Machining | USM | Work hardening
Volume: 3
Pages: 143-161
ISSN/eISSN: 17485711/1748572X
|
Citations: 43
Article #:
Source ID: 12400154711
Funding:
|
| 1212 |
Title: Mhac—an assessment tool for analysing manual material handling tasks
Authors: Batish A.
Journal: International Journal of Occupational Safety and Ergonomics
DOI: 10.1080/10803548.2008.11076754
Published: January 2008
|
Type: Article
Keywords: Load/weight | Manual carrying tasks | Material handling | Working posture
Volume: 14
Pages: 223-235
ISSN/eISSN: 10803548/
|
Citations: 10
Article #:
Source ID: 29232
Funding:
|
| 1213 |
Title: FEM analysis for different configurations of non-recessed hole-entry hybrid journal bearings for non-Newtonian lubricants
Authors: Duvedi R.K.
Journal: Industrial Lubrication and Tribology
DOI: 10.1108/00368790710820865
Published: 2007
|
Type: Review
Keywords: Bearings | Finite element analysis | Lubricants
Volume: 59
Pages: 266-277
ISSN/eISSN: 00368792/
|
Citations: 4
Article #:
Source ID: 20389
Funding:
|
| 1214 |
Title: Modelling and analysis of non-recessed hole-entry hybrid journal bearing for non-newtonian lubricants
Authors: Duvedi R.K.
Journal: Journal of the Institution of Engineers India Mechanical Engineering Division
DOI:
Published: 29 January 2007
|
Type: Article
Keywords: Capillary restrictor | Hybrid journal bearing | Non-newtonian | Non-recessed
Volume: 87
Pages: 36-45
ISSN/eISSN: 00203408/
|
Citations: 0
Article #:
Source ID: 20390
Funding:
|
| 1215 |
Title: Analysis of hybrid journal bearing for non-Newtonian lubricants
Authors: Duvedi R.
Journal: Lubrication Science
DOI: 10.1002/ls.17
Published: July 2006
|
Type: Article
Keywords: Capillary restrictor | Hybrid journal bearing | Non-Newtonian
Volume: 18
Pages: 187-207
ISSN/eISSN: 09540075/
|
Citations: 10
Article #:
Source ID: 17061
Funding:
|
| 1216 |
Title: Internal stress relief feature as a means for gear stress reduction
Authors: Saini J.S.
Journal: Journal of the Institution of Engineers India Mechanical Engineering Division
DOI:
Published: 25 April 2006
|
Type: Article
Keywords: FEM | Involute teeth | Spur gear | Stress relief feature
Volume: 87
Pages: 33-38
ISSN/eISSN: 00203408/
|
Citations: 1
Article #:
Source ID: 20390
Funding:
|
| 1217 |
Title: Finding the natural frequencies and mode shapes for vibration analysis of upright drilling machine
Authors: Saini J.
Journal: Journal of the Institution of Engineers India Mechanical Engineering Division
DOI:
Published: October 2005
|
Type: Article
Keywords: Drilling machine | F-shaped structure | Finite element method | Two-noded frame element | Vibration analysis
Volume: 86
Pages: 164-171
ISSN/eISSN: 00203408/
|
Citations: 2
Article #:
Source ID: 20390
Funding:
|
| 1218 |
Title: Discretization of a single-point cutting tool in three dimensions
Authors: Saini J.S.
Journal: Journal of the Institution of Engineers India Part PR Production Engineering Division
DOI:
Published: March 2004
|
Type: Article
Keywords: Finite element analysis | Isoparametric element | Mesh generation | Single point cutting tool | Stress analysis
Volume: 84
Pages: 71-76
ISSN/eISSN: 02576708/
|
Citations: 0
Article #:
Source ID: 12271
Funding:
|
- Dashboard
- Departments
- [CSED] Computer Science and Enginnering
- [ECED] Electronics and Communication Engineering
- [CED] Civil Engineering
- [EIED] Electrical and Instrumentation Engineering
- [SPMS] Physics and Material Science
- [SOM] Mathematics
- [CHED] Chemical Engineering
- [TSLAS] Thapar School of Liberal Arts & Sciences
- [SHSS] Humanities and Social Sciences
- [SEE] Energy and Environment
- [SCBC] Chemistry and Biochemistry
- [MED] Mechanical Engineering
- [LMTSOM] LM Thapar School of Management
- [DBT] Biotechnology
- [NNCL] Nava Nalanda Central Library
- Quartiles Distribution
- AI Query [in Beta]
- Login
- Patents Database
- Feedback Form